System Centre 2012 - Operations Manager
Evening All,
As System Centre 2012 is due for release in the next few months, and your recently certified design for MS Private cloud; I was wondering whether you the Cisco UCS Management pack? Will this be built into SCOM, or will you be offering an MP that can filter SNMP traffic?
Thanks in advance.
Paul
Thank you all. After coming into the office today I checked the event logs on VM1. All afternoon I had been getting 4 events every 15 minutes;
Three x 21023 - OpsMgr has no configuration for management group SCOM12 and is requesting new configuration from the Configuration Service
And one error, 20070 The OpsMgr Connector connected to SCOM12.test.local, but the connection was closed immediately after authentication occurred. The most likely cause of this error is that the agent is not authorized to communicate with the
server, or the server has not received configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
However at 00:04, I can see an event log 21019 - OpsMgr has returned to communicating with it's primary hostSCOM12.test.local and since then regular Health Service logs.
I checked in OM and now it is showing as Healthy and monitored - I guess this just needed a lot of time to configure itself? Is this normal behaviour?
I also checked VM1 TCP 5723 which it says was not open (the firewall is off on the server however it is working in OM.
PS C:\PSScripts> Test-Port -computer VM1 -port 5723 -tcp
Server : VM1
Port : 5723
TypePort : TCP
Open : False
Notes : Connection to Port Timed Out
Thanks again for your help. If it goes again I shall create a new post.
Similar Messages
-
Enabling Instant Messaging Notifications in System Center 2012 Operations Manager
Hello
I need your assistance please...
I followed the steps here
http://opsmgrunleashed.wordpress.com/2012/02/24/enabling-instant-messaging-notifications-in-system-center-2012-operations-manager/ to enable IM notification.
I received error in opsmgr console "Failed to send notification" the alert state (Microsoft.Rtc.Signaling.ConnectionFailureException: Unable to establish a
connection) while on the lync server I see critical event ID: 36888 (
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.)
Appreciate your help.
Thanks
Mohammad, IT NOC TeamHi,
Please checked the setting of the IM channel, ensure the Protocol is TLS and port is 5061.
Also try to create the following registry key for a test. If the issue persists, check the event log from SCOM side.
New Key: SHA
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\SHA
SubKey: Enabled
Value: Dword:00000000
Niki Han
TechNet Community Support -
Why buy System Center 2012 Operations Manager (how to convince my boss)
Hello
I need to put together a document to try and convince my boss to spend the time/money to move from SCOM 2007 R2 to SCOM 2012 R2.
One of the areas I want to focus on is Cross Platform (Unix/Linux), Network Monitoring and APM
Does any one know of any good documents/short videos showing the benefits of SCOM 2012 R2 which a view to selling the benefits to a line manager (also have a very sceptical Unix/Linux team).
Perhaps someone else has already been through this loop, and has such a documents :)
Thanks
AAnotherUser__
AAnotherUser__Hi AAnotherUser:
Here is a recent video on managing SUSU Linux with SCOM 2012 R2:
http://www.bing.com/videos/search?q=video+system+Center+operations+manager+Linux&qs=n&form=QBVR&pq=video+system+center+operations+manager+linux&sc=0-0&sp=-1&sk=#view=detail&mid=F6243978D517D71C1A74F6243978D517D71C1A74
I can assure you this level of ease of monitoring applies to all supported Linux versions not such SUSE.
This video focuses on the dashboarding features in SCOM, it might convey the value you are looking for:
http://www.bing.com/videos/search?pq=video+value+of+system+center+operations+manager&sc=0-15&sp=-1&sk=&q=video+value+of+system+center+operations+manager&qft=+filterui:videoage-lt525600&FORM=R5VR8
Here is an official white paper from Microsoft on the value of System Center 2012 R2:
http://download.microsoft.com/download/7/7/2/7721670F-DEF0-40D3-9771-43146DED5132/System_Center_2012%20R2_Overview_White_Paper.pdf
Good luck,
John Joyner MVP-SC-CDM -
System Center 2012 Operations Manager - Which do I need Datacenter or Standard license
We are monitoring around 1,400 SQL, Sharepoint, and BizTalk servers with about 30% of them being VM. All of our SCOM infrastructure servers will be VM (4 MS servers, 1 Reporting server, 1 Web server), with the exception of the DB servers being
physical.
What I need to know is; do we need the Standard license or the Datacenter license?
Standard "permits management of up to two virtual OSEs." What does this statement apply to: target servers with agents or servers in the management group? Does this mean the standard license can be used for each target server that
is physical or only has two or fewer VMs?
ThanksWe are monitoring around 1,400 SQL, Sharepoint, and BizTalk servers with about 30% of them being VM. All of our SCOM infrastructure servers will be VM (4 MS servers, 1 Reporting server, 1 Web server), with the exception of the DB servers being
physical.
What I need to know is; do we need the Standard license or the Datacenter license?
Standard "permits management of up to two virtual OSEs." What does this statement apply to: target servers with agents or servers in the management group? Does this mean the standard license can be used for each target server that
is physical or only has two or fewer VMs?
Thanks
Ends up this was a misunderstanding of how licensing works. I assumed it applied to the management servers, but as it turns out, licenses are not required for management servers.
The "Microsoft Volume Licensing Service Center" website added to the confusion since it lists Datacenter as a separate download from Standard. With this, I assumed that I needed
to determine up front which version will be used when installing SCOM and the agents. This was not correct since the download ends up being the same binary.
In the end, as Jonathan mentioned, this was strictly a licensing issue which will be handled by our purchasing department.
Thank you to everyone for your responses. -
Installing and configuring System Centre 2012 R2 to run HCK testing
I"m trying to setup a system Centre 2012 R2 for testing HCK. I do not have any idea on hwo to start this. Please help.
Thank You.
PuzzledHi tammariene,
It would be better ask to the
Configuration Manager 2012 - General forum.
Hope this helps some:
http://blogs.technet.com/b/kevinholman/archive/2013/10/18/scvmm-2012-r2-quickstart-deployment-guide.aspx
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Configuration issue on two items for system center 2012 config manager
My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
path is missing for SMSSetup\Bin\x64\ to execute
Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
As mentioned, each product has its own unique dependencies with no true overlap.
Jason | http://blog.configmgrftw.com -
System Centre 2012 schematic overview and component interactions
Hi,
I am trying to locate A3 size (Visio preferably) schematic overviews of System Centre 2012 and all of the underlying components. I want to demonstrate the product to my executives to demonstrate what each component does. I have search the net for far too
long trying to find what I would have thought would have been readily available. Any assistance would be greatly appreciated.
Thanks in advance
TimYes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
This doesn’t exist and even if it did exist the objects on the diagram would tiny.
Did you even publish this to your blog?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2
I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!! -
Configure Web console for existing "System center 2012 configuration manager R2"
How to configure Web console for existing "System center 2012 configuration manager R2"
There is no web console in ConfigMgr 2012. If you want a web console you have to look at third-party products.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
SCOM 2012 Operations Manager Failed to start a process
We have recently upgraded from SCOM 2007 to SCOM 2012. We are not getting a great deal of “Operations Manager Failed to start a process”. The process varies including:
DiscoverSQL2008ASDiscovery.vbs
DiscoverSQL2008DBEngineDiscovery.vbs
DiscoverSQL2008ASDiscovery.vbs
Microsoft.Windows.Server.NetwokAdapter.BandwidthUsed.ModuleType.vbs
I have researched and researched. I know that you can try to run the scripts locally on the machine but it seems the scripts never make it to the machine. I go to the path in the error, no luck. I look in the other folders as I know that SCOM moves the scripts,
and I even search the entire C drive but the scripts are not getting to the server. The folder is not even making it. For example:
Command executed: "C:\Windows\system32\cscript.exe" /nologo "Microsoft.Windows.Server.NetwokAdapter.BandwidthUsed.ModuleType.vbs" SERVER true Working Directory: C:\Program Files\System Center Operations Manager\Agent\Health Service State\Monitoring
Host Temporary Files 11606\1759\
The script is not there and the folder \1759 is not there either.
I have removed and reinstalled the client.
Antivirus is fine, up to date and not blocking on any of the machines.
I have stopped the “System Center Management service” and renamed the “Health Service State” folder and it recreates fine but not long after I get the warning in SCOM about “Operations Manager Failed to start a process”.
I look in event viewer for Operations Manager on this particular one and I see a lot of:
Performance data from the Health Service could not be collected since required registry keys could not be read, the error was 2L (The system cannot find the file specified.). Event ID 6001.
I tried the fix of
"lodctr MOMConnectorCounters.ini" and "lodctr HealthServiceCounters.ini" but I get “error
encountered while updating text in registry. Status: 0”. Again I am using SCOM 2012.
Do I need to look at each failed script or is there a overall issue because the scripts are not making it to the machines. Any ideas?I guess you might need to run "mofcomp sqlmgmproviderxpsp2up.mof".
Thanks, S K Agrawal -
I added a number of folders and files in the excluded files and locations and after that I am unable to access the Antimalware Policies it gives the following error( I am new at sccm):
Unhandled exception occurred in your application. If you click continue the application will ignore this error and attempt to continue. I you click quit the application will close immediately
Object reference not set to an instance of an oblect
With the following details:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryPropertySingleItem.get_BooleanValue()
at Microsoft.ConfigurationManagement.AdminConsole.ClientAgentSettings.Utilities.CreateSCIResultObject(IResultObject antimalwareResultObject)
at Microsoft.ConfigurationManagement.AdminConsole.ClientAgentSettings.Utilities.LoadDefaultSettingObjects(ConnectionManagerBase connectionManager, Dictionary`2& defaultSettingObjects, DialogType dialogType)
at Microsoft.ConfigurationManagement.AdminConsole.ClientAgentSettings.HomePageControl.InitializePageControl()
at Microsoft.ConfigurationManagement.AdminConsole.SccmPageControlDialog.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18051 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
Microsoft.ConfigurationManagement
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.ConfigurationManagement.exe
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18022 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18045 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18046 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
Microsoft.EnterpriseManagement.UI.ConsoleFramework
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.ConsoleFramework.DLL
Microsoft.ConfigurationManagement.ManagementProvider
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.ConfigurationManagement.ManagementProvider.DLL
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.EnterpriseManagement.UI.Foundation
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.Foundation.DLL
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
System.ServiceModel.Web
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18045 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Web/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Web.dll
System.ServiceModel
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18056 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel/v4.0_4.0.0.0__b77a5c561934e089/System.ServiceModel.dll
SMDiagnostics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/SMDiagnostics/v4.0_4.0.0.0__b77a5c561934e089/SMDiagnostics.dll
System.ServiceModel.Internals
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Internals/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Internals.dll
PresentationFramework
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.dll
WindowsBase
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/WindowsBase/v4.0_4.0.0.0__31bf3856ad364e35/WindowsBase.dll
PresentationCore
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/PresentationCore/v4.0_4.0.0.0__31bf3856ad364e35/PresentationCore.dll
System.Xaml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18016 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xaml/v4.0_4.0.0.0__b77a5c561934e089/System.Xaml.dll
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
AdminUI.SmsTraceListener
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SmsTraceListener.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.EnterpriseManagement.UI.ConsoleFramework.resources
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/en/Microsoft.EnterpriseManagement.UI.ConsoleFramework.resources.DLL
Microsoft.EnterpriseManagement.UI.RibbonConsole
Assembly Version: 1.0.523.0
Win32 Version: 3.0.2085.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.RibbonConsole.DLL
RibbonControlsLibrary
Assembly Version: 3.5.41019.1
Win32 Version: 3.5.41019.1
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/RibbonControlsLibrary.DLL
PresentationFramework.AeroLite
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18046 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework.AeroLite/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.AeroLite.dll
Microsoft.EnterpriseManagement.UI.RibbonLayout
Assembly Version: 1.0.523.0
Win32 Version: 3.0.2085.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.RibbonLayout.DLL
Microsoft.Windows.Shell
Assembly Version: 3.5.41019.1
Win32 Version: 3.5.41019.1
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.Windows.Shell.DLL
Microsoft.VirtualManager.UI.ViewModel.Core
Assembly Version: 1.0.523.0
Win32 Version: 3.0.2085.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.VirtualManager.UI.ViewModel.Core.DLL
Microsoft.EnterpriseManagement.UI.Controls
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.Controls.DLL
Microsoft.EnterpriseManagement.UI.RibbonData
Assembly Version: 1.0.523.0
Win32 Version: 3.0.2085.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.RibbonData.DLL
AdminUI.HelpSystem
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.HelpSystem.DLL
AdminUI.UIResources
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.UIResources.DLL
AdminUI.PersonalFolders
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.PersonalFolders.DLL
AdminUI.ConsoleGlobalSearchView
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConsoleGlobalSearchView.DLL
PresentationFramework.Classic
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework.Classic/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.Classic.dll
Microsoft.EnterpriseManagement.UI.Controls.resources
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/en/Microsoft.EnterpriseManagement.UI.Controls.resources.DLL
WindowsFormsIntegration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/WindowsFormsIntegration/v4.0_4.0.0.0__31bf3856ad364e35/WindowsFormsIntegration.dll
PresentationFramework-SystemXml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework-SystemXml/v4.0_4.0.0.0__b77a5c561934e089/PresentationFramework-SystemXml.dll
PresentationFramework.Aero
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework.Aero/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.Aero.dll
PresentationFramework-SystemCore
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework-SystemCore/v4.0_4.0.0.0__b77a5c561934e089/PresentationFramework-SystemCore.dll
UIAutomationProvider
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/UIAutomationProvider/v4.0_4.0.0.0__31bf3856ad364e35/UIAutomationProvider.dll
UIAutomationTypes
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/UIAutomationTypes/v4.0_4.0.0.0__31bf3856ad364e35/UIAutomationTypes.dll
AdminUI.Controls
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Controls.DLL
AdminUI.Common
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Common.DLL
Microsoft.EnterpriseManagement.UI.WpfViews
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.WpfViews.DLL
Microsoft.EnterpriseManagement.UI.ViewFramework
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.ViewFramework.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Management
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
AdminUI.WqlQueryEngine
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.WqlQueryEngine.DLL
AdminUI.WqlInitializer
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.WqlInitializer.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.CollectionMenuActions
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.CollectionMenuActions.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.OSImage
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.OSImage.DLL
AdminUI.AssetIntelligence
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AssetIntelligence.DLL
AdminUI.SoftwareMeteringRule
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SoftwareMeteringRule.DLL
AdminUI.DcmProperties
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.DcmProperties.DLL
AdminUI.UsmPolicy
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.UsmPolicy.DLL
AdminUI.ClientAgentSettings
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ClientAgentSettings.DLL
AdminUI.FirewallPolicy
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.FirewallPolicy.DLL
AdminUI.LegacySWD
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.LegacySWD.DLL
AdminUI.ConditionalDeliveryRule
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConditionalDeliveryRule.DLL
AdminUI.VirtualEnvironment
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.VirtualEnvironment.DLL
AdminUI.SideloadKeys
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SideloadKeys.DLL
AdminUI.SoftwareUpdateProperties
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SoftwareUpdateProperties.DLL
AdminUI.Driver
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Driver.DLL
AdminUI.DriverPackage
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.DriverPackage.DLL
AdminUI.Subscriptions
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Subscriptions.DLL
AdminUI.Queries
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Queries.DLL
AdminUI.SrsReporting
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SrsReporting.DLL
AdminUI.SiteHierarchyVisualization
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SiteHierarchyVisualization.DLL
AdminUI.SystemStatus
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SystemStatus.DLL
AdminUI.ClientOperation
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ClientOperation.DLL
AdminUI.ClientHealth
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ClientHealth.DLL
AdminUI.ContentMonitoring
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ContentMonitoring.DLL
AdminUI.AntiMalware
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AntiMalware.DLL
AdminUI.CloudServiceRoles
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.CloudServiceRoles.DLL
AdminUI.SiteHierarchy
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SiteHierarchy.DLL
AdminUI.SiteBoundaries
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SiteBoundaries.DLL
AdminUI.ExchangeConnector
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ExchangeConnector.DLL
AdminUI.Addresses
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Addresses.DLL
AdminUI.ActiveDirectory
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ActiveDirectory.DLL
AdminUI.AzureServices
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AzureServices.DLL
AdminUI.RbacUser
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.RbacUser.DLL
AdminUI.RbacRole
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.RbacRole.DLL
AdminUI.RbacCategory
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.RbacCategory.DLL
AdminUI.Package
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Package.DLL
AdminUI.Certificate
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Certificate.DLL
AdminUI.SiteSystems
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SiteSystems.DLL
AdminUI.HomePageView
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.HomePageView.DLL
Microsoft.EnterpriseManagement.UI.WpfViews.resources
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/en/Microsoft.EnterpriseManagement.UI.WpfViews.resources.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.ViewCommon
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ViewCommon.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.AICustomizeCatalog
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AICustomizeCatalog.DLL
AdminUI.AISoftwareProducts
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AISoftwareProducts.DLL
AdminUI.ConsoleView
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConsoleView.DLL
AdminUI.External.Controls
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.External.Controls.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18046 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
PresentationFramework-SystemData
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework-SystemData/v4.0_4.0.0.0__b77a5c561934e089/PresentationFramework-SystemData.dll
Microsoft.ConfigurationManagement.DialogFramework
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.ConfigurationManagement.DialogFramework.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.DialogFoundation
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.DialogFoundation.DLL
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
AdminUI.DetailPanel
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.DetailPanel.DLL
AdminUI.FeaturesUtilities
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.FeaturesUtilities.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.ConnectionAccount
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConnectionAccount.DLL
System.Runtime.Caching
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Caching/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Runtime.Caching.dll
AdminUI.ConsoleRootActions
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConsoleRootActions.DLL
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
When I go and check the Endpoint Protection properties it gives me the following Error:
The SMS Provider reported and error
With the following Details:
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "ERROR ON Property Convert";
ErrorCode = 0;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspsitesettingitem.h";
Line = 377;
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_SCI_ClientComp WHERE FileType=2 AND SiteCode='CCM' AND ItemName='Antimalware Agent' AND ItemType='Client Component'";
ProviderName = "WinMgmt";
StatusCode = 2147749917;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.AdminConsole.SiteSystems.EndpointProtectionSpynetControl.InitializePageControl()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnInitialize()
System.Management.ManagementException
Unexpected error
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.AdminConsole.SiteSystems.EndpointProtectionSpynetControl.InitializePageControl()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnInitialize()Hi,
If you only add one file into the excluded files and locations, does this error still appear?
Could you reproduce this error on another system?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
To troubleshoot issues related to Inventory, we can view the related logs or force a full inventory to analyze the reason. In these article, we mainly introduce
the detailed ways to enable Verbose and Debug logging,
save the inventory report and force a full inventory on the client.
How to force a full inventory on the client
1. Open wbemtest and connect to “root\ccm\invagt”.
Figure 1.
2. Click “Enum Classes…”and then click “OK”.
Figure 2.
In the Query Result, you can view the cache for each entry. (Figure 3)
{00000000-0000-0000-0000-000000000001}
Hardware Inventory
{00000000-0000-0000-0000-000000000002}
Software Inventory
{00000000-0000-0000-0000-000000000003}
Heartbeat
{00000000-0000-0000-0000-0000000000010} File Collection
Figure 3.
3. You can highlight the entry that contains the action you want to force a full to be sent and click “Delete” to delete it:
Figure 4.
4. Close all wbemtest dialog boxes and initiate the appropriate action in the Client Agent Action to perform a full inventory.
Figure 5.
How to enable
Verbose and Debug logging
It is also helpful to trace the flow if you enable Verbose and Debug logging on the client,
Management Point and Site Server.
To set verbose/debug logging on an SCCM client or
Management Point, you can simply edit (or create) the following registry keys:
HKLM/Software/Wow6432Node/Microsoft/CCM/Logging/@Global/LogLevel to 0
HKLM/Software/Wow6432Node/Microsoft/CCM/Logging/DebugLogging/Enabled to True
Figure 6.
Figure 7.
On the site server, you edit the following registry key to enable verbose logging and then restart the SMS_Executive (or the state system
component):
HKLM/Software/Wow6432Node/Microsoft/SMS/Components/SMS_STATE_SYSTEM/Verbose Logging – Reg_DWORD set to 1
Figure 8.
How to save the inventory report
To force the ConfigMgr client to save off a copy of the report that it sends to the Management Point, you can create an empty folder/directory under the inventory temp directory
called archive_reports.sms.
Then edit the following registry value to point to the inventory temp directory:
HKLM\Software\Microsoft\SMS\Mobile Client\Inventory\ Temp Directory
Figure 9.
Figure 10.
From the figure 9, you can see that the temp directory path is C:\Windows\CCM\Inventory\Temp. After we run the hardware inventory Cycle again, you can see the report file is
saved in the path we have defined automatically. (Figure 10)
(Note: Please delete the
archive_reports.sms folder when have finished the troubleshooting steps to save disk space.)
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hi,
I have troubleshooted this error message several times and can say that this is a generic error message. The reason can be different in your Case. As suggested in the error message you should first check all the steps in the following kb article.
http://support.microsoft.com/kb/2742275/tr
In most of my cases the performance counter corruption was the reason of this error message there fore I would suggest you to first check the System and application event logs for performance counter corruption. Right click on the System event > Find
and search for corrupt.
Additionally it is also mentioned in one of the MS kb articles that deploying winrm policies on Hyper-V Host is forbidden in a SCVMM environment.
If this is the reason in your Case you should disable it. No other chance.
Regards,
Cengiz Kuskaya -
System Center 2012 configuration manager
Hi All,
I have access to SCM 2012 R2 and i want to kill one ruining application program on user computer from software center so is it possible to kill from the server.
Br,
Ashish SangawarIf the installation is started, the easiest way to stop a running installation is by killing the installation process (in most cases msiexec.exe). This can not be done via the Configuration Manager Console.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Creating a Linked Report in SC 2012 - Operations Manager fails with Error
Hello everyone,
I was trying to create a linked report based on an availability report recently. I found Emre Guclu's scom linked report creation guide here:
http://blogs.technet.com/b/emreguclu/archive/2011/10/13/using-linked-reports-in-scom-to-create-custom-availability-reports-for-specified-monitors.aspx
I go to SSRS web console and select a report (Which is Microsoft.SystemCenter.DataWarehouse.Availability in Microsoft.SystemCenter.Datawarehouse.Reports), select "Create a Linked Report" from context menu, select another location for storing the
report just like on this guide but i get an error rsWrongItemType with exact text:
"The operation you are attempting on item ' Microsoft.SystemCenter.Datawarehouse.Reports/ Microsoft.SystemCenter.Datawarehouse.Availability' is not allowed for this item type. rsWrongItemType"
Does anyone know why is this error happening and better how to fix this?
Below is the screenshot of SSRS.Hi,
Please check the report path you have set, the location must specify the full report path, such as
/custom report folder/MyReport.
Alex Zhao
TechNet Community Support -
User device affinity in Microsoft System Center 2012 Configuration Manager
What would be the microsoft recommended User device affinity time in sccm 2012
User device affinity usage threshold (minutes)-?
User device affinity usage threshold (Days)-?
Thanks,
Sengottuvel mThe default settings seem to work well.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Maybe you are looking for
-
Creative Cloud Desktop App refuses log-in for Windows 8
I've been getting this "unknown server error" for 4 days on my windows 8 creative cloud desktop app. I cannot install other CC aps until you resolve this. -- This has been a problem ever since creative cloud FORCED me to "upgrade" the creative cloud
-
I had an existing laters 3 point whatever version of Firefox and recently upgraded to Firefox 10. This new version still has the old toolbar across the top, but there is no "Firefox button" which one has to use to activate certain action such as "pri
-
Restrict Search results in Transaction FPP3 Business Partner
Hallo, I need to restrict the search results in transaction code FPP3. When an end user calls the transaction code 'FPP3' and in the left side of the screen makes a search for Business partner based on what ever selection cryteria, standard program f
-
Will the lightning to 30 pin adapter work with the irig midi interface?
will the lightning to 30 pin adapter work with the irig midi interface? Want to record guitar with garage band on ipad mini. need quick/easy way to connect USB to ipad mini
-
Stock on hand in SIM planning version
Hi All, Is there a way the stock copied from the active version 000 to the SIM planning versnon to be updated without running report /SAPAPO/VERSION_COPY_TRANS, but manually? The problem is that if I update the stock with the report the planning vers