System change in BW for enabling Formula editor

I have a basis related question in BW.
While trying to add the process type 'Decision between Multiple Alternatives' to my process chain in quality and production systems, I get a 'system not modifiable message' when I try to create a formula in the subsequent screen . I know this is because the systems are disabled against any customising and repository changes. Which setting(s) do I change to get this to work ?
I tried changing SCC4 to allow repository changes and some settings in tcode RSWBO004 'System change option' but they had no effect. Any ideas as to what namespace setting I need to enable to allow the formula editor screen to be displayed ?
I work in BW and was trying my hands at SCC4/system change etc hence am asking it in this forum. This is more of a BW relevant question rather than a generic basis question.

Hi Daya,
The object changeability option does not seem to help in this case. The formula builder or process type 'Decision between Multiple Alternatives' is not to be seen. FYI, the technical name for the formula builder is 'RSFO'. So there might be some setting around this.
Thanks..

Similar Messages

What is System Change Option Used For?

Hi,
I need help on security.
we use scc4 settings for client protection. the settings are 'No changes allowed' for client-specific objects and 'No Changes to Repository and cross-client customizing objects' for cross-client object changes.
system change options are set to 'Modifiable'. what is the difference between these settings? Is there any situation that may cause problems?
thanks,
- ferudun

Hi ,
      No Changes allowed flag is explained as below
This flag means that changes in the customizing settings of the client
are not permitted (client lock).
However, customizing settings can be exported from the client by manual
creation of a transport request. A manual transport can be carried out
in the particular transaction for settings with the function Transport,
which places the selected customizing settings in a transport request.
In a productive client, the customizing settings that can be maintained
as "current settings" are excluded from the client lock; this means that
current settings (e.g. exchange rates, posting periods) can always be
maintained in the productive client
For 'No changes to Repository and cross cleint customizing objects' explained below
   o   Changes to the Repository and cross-client Customizing permitted
       There are no restrictions on the maintenance of cross-client object
       for the client when this setting is used. Both cross-client
       Customizing objects and objects of the SAP Repository can be
       maintained.
   o   No change to cross-client Customizing objects
       Cross-client Customizing objects cannot be maintained in the client
       with this setting.
   o   No change to Repository objects
       With this setting, objects of the SAP Repository cannot be
       maintained in the client.
   o   No change to Repository and cross-client Customizing objects
         Combination of both restrictions: Neither cross-client Customizing
objects nor objects of the SAP Repository can be maintained in the
client.
Please reward if useful.

Change of properties for %RT formula

I am using the %RT formula in a query and also using the properties of Calculate Single Value As - Normalize Sub Totals. When I do this it automaticly returns the figure to 3 decimal places and adds % at the end.
I have the properties of this formula set to scaling factor of 1 and 0 Decimal places but this doesn't change when the report is run.
This is the only function that returns the correct value for me but I cant change the properties. I need a % for each sub total down my report and the other % formulas only calculate at the report totals not the sub totals.
Any ideas as to how I can change the properties?

Have you tried creating another formula based on your calculation with the %RT in.
Set this to 2 decimal places & it seems to work.
New formula is the calc with %RT and Normalise totla sand formula 2 is just formula 1, with decimals set to 2dp
New Formula     New Formula 2
0.617 %          0.62 %
0.617 %          0.62 %
0.617 %          0.62 %
0.617 %          0.62 %
0.617 %          0.62 %

How to change the SID for an existing system

Hi All,
I need to change the SID of the development and quality system without making a system copy.
The requirement is on strict timeline basis so I need to find out an alternate way to do it. A system copy will need a lot more time to do the same which is the last option at this time.
Please suggest.
Relevant answers will be rewarded accordingly.
Regards,
Himansu Roy

Do not cross post same questino across different forums.
Changing the SID for existing SAP systems
Markus

How to change date format for prentation variable in Formula

Hi experts.._
I need to change date format for presentation variable in formula..
my dashbord date prompt format: mm/dd/yyyy(i have created one presentation variable for this prompt: pv_date)
now i need to show it as : month-dd-yyyy
Thanks in advance
Regards
Frnds

Hi Kishor...Thanks for reply...
But i need to change my precentation variable date formt...
i need to write one text like: 'Year to dd/month/yy' in one column formula..
So how can i achieve it..

How to skip or edit scn (system change number) for brarchive

hi experts,
I have searched for procedures but didnt find any accurate solution. I wanted to skip the scn or the system change number for my brarchive. I have manually transported my files in the DR site because of seems to be FTP problems. I have to skip those redologs which i have already transfered. How am i suppose to do these? I'm looking forward to a textfile or control file wherein i could edit the number of the next redolog to process or sql commands or something?
Thanks in advance.

Still not sure what exactly your problem is.
You transferred redologs; are they still available in their original oraarch location?
If no : See my answer above. Did that many times myself.
If yes : Log files will be copied by brarchive as always. Make sure that no harm will be done if they are overwritten at a place where they already exist, and where they maybe currently are processed by another program!
regards

[svn:fx-trunk] 10269: Changing default for -enable-runtime-design-layers to true.

Revision: 10269
Author:   [email protected]
Date:     2009-09-15 10:46:10 -0700 (Tue, 15 Sep 2009)
Log Message:
Changing default for -enable-runtime-design-layers to true. The flag may still be used to disable processing of design layer instances if so desired.
QE notes: None
Doc notes: None
Bugs: SDK-23238
Reviewer: Paul
Tests run: Checkin
Is noteworthy for integration: Yes, runtime design layers are now enabled by default.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23238
Modified Paths:
    flex/sdk/trunk/frameworks/tests/basicTests/BasicTests-config.xml
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.java

APDivs are a thing of the past and is bad practice. You need a working knowledge of CSS to get a modern looking layout and to do justice to your design which looks great btw.
One out-of-the-box solution is to use Bootstrap - http://twitter.github.com/bootstrap/index.html and use the pre-defined classes/ grids to layout your content.

7.2 ICM Script - Need to Grep for data within Formula Editor

We have a massive SET_SKILL script. I'm the FNG and have been
tasked with grepping every IF node in this script and using the formula editor
to determine the 4 digit Route Code and where that Route Code is being routed.
The current engineering team has built an Excel macro that involves cutting and pasting the body of text
from formula editor into the Excel macro and repeating that process over and over and over!
There are literally hundreds of IF nodes in this script and I am hoping that someone has run into a similar
need before. I've tried exporting the script but can't figure a way to read and grep the proprietary format for the 4 digit code and
the next node it is being routed to.
See attached screenshots.
TIA,
Amir

"Find" can certainly work for you.
If I were building that script, rather than have a huge set of IF nodes like that, it's much easier to do this with a CLID node with the "expression" set. This node is often used to analyze area codes of ANIs and route accordingly, but it has a lot of flexibility.
You will get a nicer style of branching and you can set up all the patterns and in Excel and copy and paste them right in there.
This is a CVP script where I am looking at Caller Input coming back from Audium to decide on what to do with the menu item selected.
Regards,
Geoff

HT5622 After both (1) changing the password for my Iphone 4S and now (2) loading latest system for it (and restoring when Itunes said I must) it will no longer restore all the apps I bought with the old password. How to get them please?

After both (1) changing the password for my Iphone 4S and now (2) loading system 6.1.3 for it (and restoring when Itunes said I must)
- Itunes it will no longer restore all the apps I bought with the old psasword.
How to get them please?
===========================
Sorry - no - all well, they seem to be all coming back - back just after I put this question.
Mysterious to me but very satisfactory.
Profile doubtless that of an ignoramus.

Ok, so I was able to find one but the one i'm most diappointed is the "free music" app i purchased and it had hundreds of songs that i didn't put on my desk top to save. So just so we're clear, I cannot get that app back again with all my songs if it wasn't in the "purchased" place?
Also,
my husband has a iphone 4 and i've been trying to connect it to our Garmin GPS through bluetooth. Now both devices recognize it but once a call is made or received, nothing goes through the GPS. I've had it working before but it was before a couple of upgrades. It is currently on ios7.2 upgrade. Is that why it won't work?
Thanks

Warning: Full-text change tracking is currently enabled for table or indexed view 'fim.ObjectValueString'

Hi,
As per the FIM best practice guide, we are trying to disable full-text indexing on the FIM Service database, during the initial load using:
ALTER FULLTEXT INDEX ON [fim].[ObjectValueString] SET CHANGE_TRACKING = MANUAL
ALTER FULLTEXT INDEX ON [fim].[ObjectValueXml] SET CHANGE_TRACKING = MANUAL
However, we get the following warning:
Warning: Full-text change tracking is currently enabled for table or indexed view 'fim.ObjectValueString'
Does anyone know how we can solve this?
Regards,
SK

<Going through old threads>
This doesn't disable change tracking it merely sets it to manual.
The link below shows and explains the three settings (enabled, manual and disabled):
http://technet.microsoft.com/en-us/library/ms187025(v=sql.105).aspx
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Old email is closed. I have no access to it. Cannot change email address for icloud in system preferences,does anyone have a way this can be corrected? I don't have access to icloud.

Old email is closed. I have no access to it. Cannot change email address for icloud in system preferences,does anyone have a way this can be corrected? I don't have access to icloud.

Hi Joycars,
Can you not simply sign out of the iCloud account with the incorrect email? Not sure I'm following?
GB

CO01 - system changes sch.start time given by the user (fwd sched., no cap. check, no shifts defined)

Dear Experts,
I am facing a very strange issue. Whenever I am trying to manually create and schedule a discrete production order in ECC 6.0, with 1-forward scheduling (in CO01 transaction), by giving scheduled start date and time and pressing the "Schedule" button; the system changes the start time given by me (the date remains) and executes the scheduling with that start time.
For example, when I want to produce 12072 PCs, and I give 08:00 as shceduled start time, the system changes it to 15:59, adds the operation times correctly and defines the 'correct' scheduled end date (again, with fwd scheduling type!).
There is some logic on how the system changes the scheduled start time given by me. Below a certain production quantity, the issue doesn't come up, lead time scheduling is carried out, as it is expected. So the problem only occurs, when the order qty exceeds a certain limitation. In that case the order cannot be scheduled to a certain time phrame (between 07:59 and 15:59), so the system changes the scheduled start time given by me (whenever the order falls into the mentioned period). Depending on the order qty the mentioned period (to which the order cannot be scheduled) is changing.
I made the following checks in the system:
production calendar is set correctly, it is not blocking the production
all the applied work centers are available from 00-24 hrs
no shifts has been defined on any of the WCs, production is enabled in 00-24 hrs
there is no other production scheduled on any of the work centers, capacity load is 0% on all of them, as it has been checked in CM03
order scheduling was performed with '1-forward' scheduling type
anyway, capacity check is switched off in the system
formulas on the work centers are all correct, the processing time calculated based on them is also correct (No queue, wait, setup, etc. times are set in the system, we are only using processing times.)
no error messages
As far as I know, in the above case lead time scheduling must be carried out, the system is simply 'not allowed' to change the start date given by me, just add operation times to the start and define the scheduled end date.
Thank you in advance,
T

Jiaul,
please find the screenshots.
1.Mark for Relevant finite scheduling in scheduling or capacity tab - yes
2.Can be used for multiple operation - yes
3.Capacity Planner Group set up - yes
Caetano,
in my case the order scheduled start date is exactly the same as the operation start date. The problem is that this date cannot be manually scheduled to a certain time interval, the system changes the scheduled start date specified by me. (Like there was a "blocked period".)
Thank you,
T

How to FORMAT a number field in Formula editor

Dear All,
I have a "QUANTITY" field in database which has to get displayed in the report as " QTY : " that will look like QTY : 54.
Where as now it coming as QTY : 54.00
So, how to format this field in the Formula Editor while concatenation of
"QTY : " + CStr()
If any one has any idea please help me out.
Thanks and regards.

Hi friends,
Thanks to all of you that you all have replied my question and given your answers.
Thanks to all of you specially Alpana Phapale, Wallie Chang, Poonam Thorat and Raghavendra Gadhamsetty, the answers given by you is the perfect one may be in different ways and only one can be used by me. But your answers were exactly correct.
Thanks to Asha Lund, your answers is also correct but the result as per my report should be in figures and not in words.
Whatever it may be but for repling thanks to you too.
Please be always with me, I am very new to Crystal Report and just learnt by my own as my Boss ordered me to do this and I have to make about 50 reports within 15 days. I think the day will start from today.
Well friends thanks a lot again for all your effort.

Formula editor in CO-PA forms

I know writing Logical expressions like 'IF' condition in the formula of a Report Painter report (Tcode GRR1). Tried to use the same kind of syntax to write a 'IF' condition in the formula editor of the CO-PA form. But it is not accepting that kind of a syntax. Does anyone know how to write 'IF'... 'THEN'.... 'ELSE' kind of a formula in a CO-PA form?

Thanks for your answer. Seemed to be a good idea, but the problem is that after defining value fields in lines, you can't define them in columns as well...
The only options now available in columns are "Characteristics", "Predefined element" and "Formula"... But for formulas, the system doesn't let me use line values.
I just want a pretty simple thing:
.............................|...Total Value...|...Unit Value
Quantity................|.......X..............|........1
Total Sales............|......Y..............|.......Y/X
Total Discounts.....|......Z...............|.......Z/X
Apparently, I can't get there...
Edited by: Nuno Ferreira on Feb 2, 2012 12:07 PM

How to make changes in Savings plan calculation formula

How can we make changes in savings plan calculation formula in benefits module?

I have to configure the following scenario.
There are 2 health plans into the system like
a) BCBS with plan options: Basic & Special
b) Mediservice with plan options: Basic & Supplementary.
currently both the plans with all the corresponding plan options are available for hourly employees.
Changes in configuration required isthat: Hourly employees are eligible only for BCBS-Basic plan and Mediservice-Basic plan.
How do I make these changes in the system?
Kindly help
Thanks

System change in BW for enabling Formula editor

Similar Messages

Maybe you are looking for