System change option

Hi,
In transaction code se06,I have changed the global setting as modifiable but software component and Namespace/Name range shows as not modifiable only.What is the problem?
Regards,
Nannas

Some points that you check......
You need to check that the client is open in Scc4.(Automatic changes recording , changes to Repositary and Customising)
Now go to se06 and change the Nametabe to Modifiable ,Software components to be modifiable.
Thanks

Similar Messages

Software components can keep modifiable in bw 3.5 system change options

hello experts,
can we keep software components modifiable in bw 3.5 production in system change option (se06)
it very urgent

Hi
Transaction SE06 - Processing After Installation of the CTO
Transaction SE06 has to be executed once in every newly installed R/3 System. This applies to an R/3 standard installation as well as the installation of a copy of an existing R/3 system.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport Organizer Closing other requests and tasks Setting the system change option
Meaning of the system name The system name (SID) is defined during the installation with R3setup and cannot be changed subsequently.
When you choose names, make sure that there are no naming conflicts with existing systems. Under no circumstances may two systems within an SAP system group have the same name.
The installation type of the R/3 System is specified in the initial screen:
R/3 standard installation
The R/3 System was installed from the SAP CD using R3setup. It is assumed that the system is running on a correct, delivered version of the R/3 System. No adjustments based on corrections or repairs have been made.
If you set up an R/3 System that originated from a database copy using this option, problems could arise when you upgrade or modify objects with the Change and Transport Organizer.
Database copy or database migration
The R/3 System was created on the basis of a copy. R3setup provides utilities to do this. The R/3 System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new R/3 System to the SAP system group, you have to give it a name that has not yet been used in the group.
You should avoid using a previously used system name as this could cause serious complications and may also lead to the loss of information.
If you have installed your SAP System as a copy of an existing SAP System then you must configure the CTS after installation.
In SAP Systems installed with R3setup from the SAP CD the basic settings for the CTS are generated during the configuration of the Transport Management System. You do not need to perform any processing after installation.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport System
Setting the system change option
Closing foreign requests and tasks
You must specify the installation type of the SAP System on the initial screen:
Standard installation
The SAP System was installed from the SAP CD using R3setup. It is assumed that the SAP System is running as a correct, delivered version. No adjustments based on corrections or repairs have been made.
If you set up an SAP System that originated from a database copy using this option, problems could arise when you upgrade the system or modify objects with the Transport Organizer.
Database copy or database migration
The SAP System was created on the basis of a copy. R3setup provides utilities to do this. The SAP System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new SAP System to the SAP system group, you have to give it a name that has not yet been used in the group.
Do not use an existing system name since this could cause serious conflicts and may lead to the loss of data.

SE03 / SE06 System Change Option Scope

Hi All,
We are creating a source system from R/3 to BW in some specify step we need to change the System Change Option of the sistem in a particular client (SE06 -> System Change Option -> No Modifiable to Modifiable and Modifiable to No Modifiable).
My question is: This changes are Cross Client?
Or only apply to the specify client where you are logged?
Best Regards,
Erick Ilarraza

On their own, Global and Compenent specific change options are not client dependent as they are not related to the logical system of the ABAP user nor the master and transaction data (tables with field MANDT as key).
Personally, I think of it as a "call stack" of checks on whether and what you can modify. Perhaps "System Change Update-ability" would have been a better label, but that is not good English.
As the stack is released for a user in a client (a logical program system), the system determines what can be updated at different levels of the stack as it unfolds, a bit like a spring. At the top there is SE06. At the bottom of the spring there are individual authority-checks which are system, client, program flow and context, and user access dependent.
Depending on where in the stack you release the spring from and how you got there, your user can update parts of the stack. Often the term "logical systems" is used in connection with the client (SCC4 client), but also many others such as workflow etc.
=> If the user can pass authority-checks for access at the bottom of the stack (S_DEVELOP is the key control here), then they can also change that which the top of the stack was designed to control. If you can debug, then there is nothing which will stand in your way.
> My question is: This changes are Cross Client?
It depends. You still need to control access via authorizations within the client to secure access to the whole system.
Cheers,
Julius

What is System Change Option Used For?

Hi,
I need help on security.
we use scc4 settings for client protection. the settings are 'No changes allowed' for client-specific objects and 'No Changes to Repository and cross-client customizing objects' for cross-client object changes.
system change options are set to 'Modifiable'. what is the difference between these settings? Is there any situation that may cause problems?
thanks,
- ferudun

Hi ,
      No Changes allowed flag is explained as below
This flag means that changes in the customizing settings of the client
are not permitted (client lock).
However, customizing settings can be exported from the client by manual
creation of a transport request. A manual transport can be carried out
in the particular transaction for settings with the function Transport,
which places the selected customizing settings in a transport request.
In a productive client, the customizing settings that can be maintained
as "current settings" are excluded from the client lock; this means that
current settings (e.g. exchange rates, posting periods) can always be
maintained in the productive client
For 'No changes to Repository and cross cleint customizing objects' explained below
   o   Changes to the Repository and cross-client Customizing permitted
       There are no restrictions on the maintenance of cross-client object
       for the client when this setting is used. Both cross-client
       Customizing objects and objects of the SAP Repository can be
       maintained.
   o   No change to cross-client Customizing objects
       Cross-client Customizing objects cannot be maintained in the client
       with this setting.
   o   No change to Repository objects
       With this setting, objects of the SAP Repository cannot be
       maintained in the client.
   o   No change to Repository and cross-client Customizing objects
         Combination of both restrictions: Neither cross-client Customizing
objects nor objects of the SAP Repository can be maintained in the
client.
Please reward if useful.

In which table system change options are set

In which table system change options are set(from transaction se03). I have table logging on but do not know in which table I should look for changes.

Joe,
Below link & sap notes may be useful.
http://www.saptechies.com/how-to-activate-the-img-change-log/
388691 Cross client customization, system change options
184586 - System change option and BW
Thanks
Sushil

System change option prevents entry in QS41

Respect Guru,
in our production system System change options in
Se06 is set as not modifiable, further client is closed.
Client role set is Production.
We are unable to edit entries in QS41, but we edited enties earlier with the same settings mentioned earlier.
Please help us in this regard.

Thank you Paul,
you are right paul, i did changes as per your suggestion.
Things worked out in Proudction server.
Thanks and regards,
Daya.
Mohan raised this forum for me. Further i am not able to award points for you.
Please suggest

ChaRM:System Change Option

Hi Team,
I have activated CHaRM BC sets and created maintenace project. The mainteanace cycle also created successfully. But in the t.code /tmwflow/cmsconf, in the "System Change Option" tab, no systems are displayed. How to bring the ChaRM client, DEV,QA &PRD systems (satellite systems) in this tab.
Note; I am working in SAP EHP 1 for SAP Solution Manager 7.0, ST: SAPKITL433
Thanks.
PSK
Edited by: psk.psg on Oct 6, 2010 7:46 AM

Hello,
Have you completed the following steps in SOLMAN
1) In SMSY creation of RFC connection to the required systems like for CHARM consider you have 3 systems , Customizingg, testing and prod then you have to create the RFC connection to all the 3 systems for particular client.
2) In SPRO in SOLMAN have you Activate Integration with change request mgt
3) Also I hope you have configured STMS properly and distributed the STMS.
Best Regards
Shishir H D

SE03 Set system change option ?

What is the meaning for SE03? Why would I set anything to motmodifiable in DEV.
I would think Software comp and namespace should all be modifiable in my Developemnt environment.
Does anyone have some information that describes what this actually does or any pros and cons with setting options on the SW components and namespaces.
Thanks
Weyland Y.

Hi Weyland,
By understanding the architecture of SAP like, what is a Client , Cross-Client settings and Repositories. You might have an answer, why this system change option is really needed.
refer the link:
http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b4eb711d182bf0000e829fbfe/content.htm.
System change options settings mainly affect repositories & cross client customizing, changing the settings at these level will affect all the clients .
Thanks
Ahamed
Edited by: Ahamed Yasin on Feb 5, 2010 11:38 AM

Personalization - which System Change Option is needed?

Hi Friends,
Personalization does not work in Cosolidation or Productive System due to System Change options. SAP Help states, System change options need to be activated... but which one is is? There are lots of them and we usually are very restrictive with System Change options.
Please help!
Angelika

In SE03, administration-->setsystemchange option
Right click and find the documentation available:
Description
Use this program to set the system change option.
Use the global setting to specify whether Repository objects and cross-client Customizing are modifiable or not.
To make cross-client Customizing objects modifiable, you need to allow changes in the global setting and the Client Setting.
There is also another option for Repository objects: Each Repository object is in a namespace or name range, and in a software component.
So that a Repository object can be changed, you need to set the following to Modifiable:
the global setting
the namespace or name range
the software component of the object
You can set the software component so that the Repository objects are Modifiable, have Restricted modifiability or are Not modifiable. Restricted modifiability means that you can create Repository objects in this software component as non-original objects only.
You can set the namespace or name range so that its Repository objects are modifiable or not modifiable.
Requirements
You need the administration authorization for the Change and Transport Organizer to execute this report program.
Output
All software components and namespaces/name ranges are displayed. You can then make your changes to them.
Example
Notes
The SAP System logs this activity. To display the log of the system change option settings, choose Log.
The way the system change option is set has no effect on client-specific Customizing changes. The Client Control Setting determines whether you can change client-specific Customizing or not.
To set those namespaces for which you have the producer role to Modifiable, choose Edit -> Own namespaces modifiable. These include your own prefix namespaces, if you have applied for any from SAP. For more information on using prefix namespaces, see Help -> SAP Library -> BC - Basis Components -> Change and Transport System -> Namespaces and Naming Conventions -> Development in Reserved Namespaces.
Hope this helps

[ECC6 - se06] - how to set System Change Option / subentries to modifiable or not modifiable

When the customizing is set to "modifiable" we have to set all thesub items to "modifiable".
What is the parameter to make all the sub items under Global Settings to modifiable or not modifiable.
In fact, it is very long and not so interesting to set all sub items each time we are requested to open Customizing.

Thank you Reagan,
I think I wasn't precise enough.
As I tried to show in my snapshot, I agree that I can change all the under items but that is my problem.
How to make them ALL selected when you set the parent "Global Seting" to modifiable.

The system and namespace change option

Hi Experts,
I want to integrate a certain SAP Source System within RSA1. After submitting the correct settings for Background User and RFC connection the process leads me to the Source System where I logon with an User which has authorizations in SM59. From there on (the RFC Connection backwards is already defined) I got asked whether I want to user/check/cancel this existing RFC Connection. I click on use, wait for a while and then the error (please see below) appears.
When proceeding with the steps mentioned in the error message (transaction SE03, Administration node, ...) I cannot find any IDOC Object ZSSA009. I think maybe it's related to some software component or somenthing like that which should be set as "modifiable" but I don't know which....
Any Ideas on this?
Many thanks in advance.
Best regards
Tobias
Error Message:
Message no. TO128
Diagnosis
The system and namespace change option set for this SAP System does not allow any changes to be made to object IDOC ZSSA009.
System Response
Editing is terminated, the object can only be displayed.
Procedure
If you want to edit the object IDOC ZSSA009 in this SAP System, have your system administator set the SAP System to "modifiable" for this object.
This can affect the modifiability of the namespace &1 or the namespaces that correspond to the pattern &1, as well as the global setting of the system change option.
The system change option is set using the Transport Organizer tools (Transaction SE03). Expand the Administration node and execute the program Set system change option. The options are described there.

HI,
Attached link may help you in configuring the source system.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152
Thanks,
Arun

Monitor system change status using Solman

Is it possible to setup a CCMS monitor that causes an alert whenever the system change option is modified in SE06? Last week we had to open our production environment to make a change and then forgot to close it. The result was the system was left open for a few days before we realized the mistake.
Any help is appreciated.
I have found another way to monitor this scenario
Edited by: Ed Mrowiec on Jul 13, 2010 9:05 AM

Hi Rayyan,
All of the readings regarding changing Oracle passwords state that they should be done in Brtools because it updates certain SAP tables with the new password information while doing it diterctly under SQLPLUS will only update Oracle
All the SAP tables are owned by schema user and not system or SYS users. Both these users are used only by Oracle processes. Hence it has to be changed by SQL command.
Hope this is useful.
Regards,
Deepak Kori

Client Change options in SCC4 (SAP ECC 6.0)

Hi,
Our SAP Development system SCC4 settings are as mentioned below:
1.Changes and transports for client-specific objects : Automatic recording of changes
2.Cross-client object changes : Changes to repository and cross-client customizing allowed
3.Protection regarding client copy/comparison,: Protection level 1: No overwriting
Please suggest me , above mentioned settings are correct?
Development users are complainting that they are getting error "SAP System has status 'not modifiable'", Can anyone please help me how to solve this problem?
Thanks in advance!!!!
Regards
Veera

SE06
@ clieck on
system change option
@ go to EDIT
software Comonents Modifiable
Name sapces Modifiable
own name space Modifiable
but if it is PRD system then i will Not suggest for client Modifiable..
Best of Luck
Thanks
Mithun Das

System change in BW for enabling Formula editor

I have a basis related question in BW.
While trying to add the process type 'Decision between Multiple Alternatives' to my process chain in quality and production systems, I get a 'system not modifiable message' when I try to create a formula in the subsequent screen . I know this is because the systems are disabled against any customising and repository changes. Which setting(s) do I change to get this to work ?
I tried changing SCC4 to allow repository changes and some settings in tcode RSWBO004 'System change option' but they had no effect. Any ideas as to what namespace setting I need to enable to allow the formula editor screen to be displayed ?
I work in BW and was trying my hands at SCC4/system change etc hence am asking it in this forum. This is more of a BW relevant question rather than a generic basis question.

Hi Daya,
The object changeability option does not seem to help in this case. The formula builder or process type 'Decision between Multiple Alternatives' is not to be seen. FYI, the technical name for the formula builder is 'RSFO'. So there might be some setting around this.
Thanks..

How to track the User who has changed the System Profile Options

HI ,
The system profile options are changed by one User (Ex: XX123).
Here, the user XX123, he is not having any sys admin responsibilities .
He is having only I-proc responsibility attached .
Is there any chance to update the system profile options , through I-proc.

Pl post details of OS, database and EBS versions, along with which profile options have been changed.
AFAIK, IProc responsibilities do not have access to change profile options.
HTH
Srini

System change option

Similar Messages

Maybe you are looking for