System check fails on install

The first time I tried to install Flash CS4 trial (on Vista
Ultimate 32bit as admin) it crashed my computer. Hard. I wasn't
able to load Windows due to "registry corrupted or missing".
Fixed all that (a lot of bad data linked to the Flash
install) and manually deleted all the files I could find (some were
unrecoverable) since I was unable to run uninstall.
Tried it again. Now I get this error during install:
Critical errors were found in setup for Adobe Flash CS4:
undefined
The installer database in invalid: please re-install the
product from the original media
I can't uninstall and have to manually delete files. I tried
installing twice with the same results.
Ideas?

Hi Christine,
You could give the "Adobe CS4 Clean Script" a try; it might
help You resolve the installation problem You experienced by the
Adobe Creative Suite 4 software:
http://www.adobe.com/support/contact/cs4clean.html

Similar Messages

"FILESYSTEM CHECK FAILED" - fresh install, clean partition

Hi,
I just installed Arch on my Asus EEE 701SD. Since GRUB is extremely slow (takes about 30-45 seconds from "loading..." to menu) I've set up my /boot on a separate flash drive. However, booting the new installation gives me the "FILESYSTEM CHECK FAILED" + maintenance shell. I've tried running fsck with various options but none of it has helped. Apparently, the partition is clean so I'm not quite sure what's going on. Any suggestions?
Cheers:)

The hook "usb" should work too, so I don't think we're on the right track here. But since it doesn't hurt you can add the actual kernel modules to the modules= line:
usbcore ehci-hcd (and/or uhci-hcd) usb-storage and maybe the filesystem used (and it's dependencies like ciphers).
Greets,
demian
// I guess I'm a slow typer. Why don't you show us your /etc/fstab?
From what you've written the system shouldn't be able to boot since there's no fstab entry for /boot. Maybe I misunderstood you.
Last edited by demian (2010-06-07 23:00:48)

Slp check failed when installing touchpad driver

hello,
when i try to install the intelligent touchpad driver i get the error message "slp check failed". my OS is win7, installed on the 24gb ssd.

ok it doesnt matter anymore, it seems to work with another driver now, but thanks for reading anyways!

Pre-install system check fails in Oracle apps R12i

Hi,
I am trying to install Oracle apps 12i on a fresh Windows 2003 system with suitable hardware (1.5 GB ram & 250 GB HD)
I am recieving the error :
System Utilities
command: cmd.exe /c D:\downloads\OracleAppsR12I\Extract\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin\bin d:\Tools\MSVC\VC98
D:\downloads\OracleAppsR12I\Extract\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
cl: Command not found.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
This is the setup I have done :
Installed Visual C++ express edition in the direcory :
D:\Tools\MSVC
Installed cygwin in directory :
C:\cygwin\bin
From Command prompt things seem to be OK :
D:\>which cl
/cygdrive/d/Tools/MSVC/VC98/VC/bin/cl
D:\>echo %path%
C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\
Wbem;C:\cygwin\bin;D:\Tools\MSVC\VC98\VC\bin;D:\Tools\MSVC\VC98\Common7\IDE
D:\>which gnumake
/usr/bin/gnumake
gnumake.exe is located in directory C:\cygwin\bin
I followed steps from forum that describes installation of Oracle apps 11i :
http://forums.oracle.com/forums/thread.jspa?messageID=1566573
I would appreciate if anybody can advise what are the possible causes of the above problem
Regards
AK

I am able to install oracle ebs successfully, but not able to open the home page. Error coming is "ip address not found".Can you ping the IP address, hostname.domainname?
According to me the issue is that my server is on workgroup and not on any domain. I have given the domain name When installer was asking for domain name. I have also modified the host file for the same.Could you please post the contents of the hosts file here (you may edit the hostname/domainname values to something different as we need to see the format of the entries).
Now i have two options:
1. If i put the server on the domain which is passed to installer when asked.
2. Now, what all i can do to login on application with keeping the server on workgroup.You do not have to join any domain, and you can simply set this from:
- Right click on 'My Computer' > Properties > 'Computer Name' > Change
- Set 'Computer Name' to <hostname>
- Click on More
- Set a 'Primary DNS Suffix of this Computer' to <domainname.com>
thanks for your prompt reply to my previous post. I really admire your work on forums.You are welcome :)
Thanks,
Hussein

Reporting site system role fails to install

When I try to install the site system reporting role it shows success but looking at the status is shows critical. The srsrpsetup.log shows the following..
<01/27/15 10:53:10> ====================================================================
<01/27/15 10:53:10> SMSSRSRP Setup Started....
<01/27/15 10:53:10> Parameters: C:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:LOUSYSCNTR01 SMSSRSRP 0
<01/27/15 10:53:10> Installing Pre Reqs for SMSSRSRP
<01/27/15 10:53:10> ======== Installing Pre Reqs for Role SMSSRSRP ========
<01/27/15 10:53:10> Found 1 Pre Reqs for Role SMSSRSRP
<01/27/15 10:53:10> Pre Req SqlNativeClient found.
<01/27/15 10:53:10> SqlNativeClient already installed (Product Code: {3965C9F9-9B9A-4391-AC4B-8388210D3AA0}). Would not install again.
<01/27/15 10:53:10> Pre Req SqlNativeClient is already installed. Skipping it.
<01/27/15 10:53:10> ======== Completed Installation of Pre Reqs for Role SMSSRSRP ========
<01/27/15 10:53:10> Installing the SMSSRSRP
<01/27/15 10:53:10> Passed OS version check.
<01/27/15 10:53:10> .NET Framework 4.0 Full profile is installed.
<01/27/15 10:53:10> Clean up old files
<01/27/15 10:53:10> Deleting \\?\C:\Program Files\SMS_SRSRP, FAILED, Win32 Error = 2
<01/27/15 10:53:10> Cannot delete old installation directory C:\Program Files\SMS_SRSRP. Error Code=2. Installation will continue.
<01/27/15 10:53:10> No versions of SMSSRSRP are installed. Installing new SMSSRSRP.
<01/27/15 10:53:10> Enabling MSI logging. srsrp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\srsrpMSI.log
<01/27/15 10:53:10> Installing C:\Program Files\Microsoft Configuration Manager\bin\x64\srsrp.msi SRSRPINSTALLDIR="C:\Program Files\SMS_SRSRP" SRSRPLANGPACKFLAGS=0
<01/27/15 10:53:12> srsrp.msi exited with return code: 0
<01/27/15 10:53:12> Installation was successful.
<01/27/15 10:53:12> Cannot register C:\Program Files\SMS_SRSRP\srsserver.dll, it doesn't exist
<01/27/15 10:53:12> Cannot register C:\Program Files\SMS_SRSRP\srsserver.dll, it doesn't exist
<01/27/15 10:53:12> Cannot register SRSRP interop DLL C:\Program Files\SMS_SRSRP\srsserver.dll. Installation cannot continue.
<01/27/15 10:53:12> Fatal MSI Error - srsrp.msi could not be installed.
<01/27/15 10:53:12> ~RoleSetup().

Do the DLLs exist? Have you temporarily turn off AV and install the RP? what does srsrpMSI.log log say?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

ThinkPad Yoga 12 System Update fails to install fixes

I have been having the famous floating cursor problem using OneLink Doc and external monitor, mouse and keyboard. So I decided to run System Update (5.06.0034) to see if anything appropriate would inbstall. SU downloaded 4 fixes, and I selected all to install. The fixes downloaded, installation began and all fixes immediately showed "installation failed".
Therer was a manual update available in the failure message, but clicking on it did not cause anything to happen.
The fixes displayed were
- Lenovo Power Management Driver 1.67.10.4002
- Lenovo Settings Dependency Package 2.3.3.41
- Installed camera Driver for Realtek 6.2.9200.10252
- ThinkPad BIOS Update (non-Vpro) 1.24.1.24
I went to downloads and downloaded and manually installed Lenovo Power Management Driver and Lenovo Settings Dependency Package (restarts required).
I ran SU and it showed only the BIOS update needed. I tried again to install and got the same failure.
I went back to downloads and the only BIOS update was 1.08, not 1.24.1.24. I tried to install it anyway and the install failed due to "The process does not recognize this system. The process has been canceled."
I tried uninstalling SU and reinstalling and restart, I ran SU, downloaded and tried to install the BIOS and SU immediately displayed "installation failed".
So I have a couple of problems. SU is not working and I don't know where to look to try to determine the installation problem. The BIOS update info does not match up between SU and the downloads page.
Any ideas on where to look for the SU failure to install fixes? Do I need the BIOS?. I checked and my current BIOS shows as LENOVO GQET43WW (1.23), 1/21/2015.

I have been having the famous floating cursor problem using OneLink Doc and external monitor, mouse and keyboard. So I decided to run System Update (5.06.0034) to see if anything appropriate would inbstall. SU downloaded 4 fixes, and I selected all to install. The fixes downloaded, installation began and all fixes immediately showed "installation failed".
Therer was a manual update available in the failure message, but clicking on it did not cause anything to happen.
The fixes displayed were
- Lenovo Power Management Driver 1.67.10.4002
- Lenovo Settings Dependency Package 2.3.3.41
- Installed camera Driver for Realtek 6.2.9200.10252
- ThinkPad BIOS Update (non-Vpro) 1.24.1.24
I went to downloads and downloaded and manually installed Lenovo Power Management Driver and Lenovo Settings Dependency Package (restarts required).
I ran SU and it showed only the BIOS update needed. I tried again to install and got the same failure.
I went back to downloads and the only BIOS update was 1.08, not 1.24.1.24. I tried to install it anyway and the install failed due to "The process does not recognize this system. The process has been canceled."
I tried uninstalling SU and reinstalling and restart, I ran SU, downloaded and tried to install the BIOS and SU immediately displayed "installation failed".
So I have a couple of problems. SU is not working and I don't know where to look to try to determine the installation problem. The BIOS update info does not match up between SU and the downloads page.
Any ideas on where to look for the SU failure to install fixes? Do I need the BIOS?. I checked and my current BIOS shows as LENOVO GQET43WW (1.23), 1/21/2015.

File system check fails "FATAL"

Dear all,
after about three of years of running, one of my Xsan filesystems died. The fsm process stops running after about 2 minutes in running state. A filesystem check with cvfsck -w -v <Name> ends with:
Creating Daten allocation check file.
Stripe Group Daten ( 0) 0xe8def800 blocks.
Building Inode Index Database 91458560 ( 52%).
Fatal: rf_relblk write failed - Input/output error
Building Inode Index Database 91459584 ( 52%).
Fatal: Cannot insert inotab for [0x32a9e378800]! -No such file or directory
Fatal: Cannot build inode tracking tree - Input/output error.
I cannot see any misbehaviour of the hardware itself. RAID Admin is green everywhere.
The filesystem size is about 17 TB and the data is quite important. Is there any way to proceed without re-formatting?
Some more information I found in the log files:
[0923 16:26:42] 0xa000ed88 (debug) FSS 'Experiments' REGISTERED -> DYING, next e
vent in 60s
[0923 16:26:43] 0x1802e00 INFO Disk rescan found 10 disks
[0923 16:26:43] 0xa000ed88 INFO NSS: Active FSS 'Experiments[0]' at 192.168.100.
10:49275 (pid 354) - dropped.
[0923 16:26:45] 0x1801600 ERR Portmapper: FSS 'Experiments' (pid 354) exited on
signal 4
[0923 16:26:45] 0x1801600 ERR FSS 'Experiments' appears unstable (2 failures in
60 minutes or less), halting restarts
[0923 16:26:45] 0x1801600 (debug) FSS 'Experiments' DYING -> STOPPED (corefile l
imit exceeded)
Any hint is really appreciated.
Best regards,
Torsten

Thanks for the hint. Well, the cvfsck -j command succeeded rather quickly. But the -w afterwards fails again:
Super Block information.
FS Created On : Wed Aug 31 13:24:34 2005
Inode Version : '2.3'
File System Status : Clean
Allocated Inodes : 173699072
Free Inodes : 37814385
FL Blocks : 9309
Next Inode Chunk : 0x2c05d400
Windows Security Indx Inode : 0x4
Windows Security Data Inode : 0x5
Quota Database Inode : 0x6
ID Database Inode : 0xb
Client Write Opens Inode : 0x7
Creating Daten allocation check file.
Stripe Group Daten ( 0) 0xe8def800 blocks.
Building Inode Index Database 91363328 ( 52%).
Fatal: Cannot insert inotab for [0x8261a053f400]! -No such file or directory
Fatal: Cannot build inode tracking tree - Input/output error.
Is there anything else I can do?
Thanks,
Torsten

System restore. failed driver install

Was having issues with the laptop so decided to do a full factory reset using the built in windows HP recovery. This failed so then used the recovery discs provided and worked to a point.
Formats OK, copies files OK, asks for the driver discs and does that (appears so) OK. Reboots and installs windows then HP software and drivers. What seems to be forever system reboots and then tells me its failed due to no drivers.
I have attempted this now 4/times with same result. These discs were provided by HP as my drive failed previously so should be the correct discs. This is the only HP machine and the only HP discs I have ever had.
Currently the machine is useless, unable to do anything. No way to get to desktop to manually install drivers after. Very annoying to say the least

Test the hard drive and memory modules, run the extended and quick tests, post back any errors or messages
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&tmp_task=solveCategory&cc=us&dlc=en&la...

Preinstall check failed - Unable to install SAP HANA Client

Hi all,
Recently I had to format my system and after loading the Windows 8 I downloaded the SAP HANA Client, SAP HANA Studio and SAP HANA JDBC Drivers for re-distribution from https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/ into the default folder which is C:Programfiles:SAP HANA Client and Studio
I installed the client and then the studio and then clicked on the executable ngdbc.jar file and clicked on ok.
Then I went to SAP HANA 70 client win32 folder and clicked on the hdbsetup to load client. I am getting the following error:
Preinstall check failed
SDB::Install::System::getMountPointWin: Malformed file path normalization: "ngdbc.jar"
Can any one please explain what this error is and how do I fix this error. I searched in the forum but could not find anything related to this error.
Thank you.
Regards
Pavan.

I am posting the results of my issues here, to be sure this is documented.
Close all applications
Uninstall SAP/b1 and all related components
Delete folder X:\Program Files\sap
Delete folder X:\Program Files (x86)\sap
Open REGEDIT and clean out all parent keys where "HANA" appears
Install the SAP/b1 client first!
Run the HANA Client installation "...as Administrator"
When the installation runs, it should default to "Install new"
Make sure you set/select the folder path properly to show X:\Program Files\sap\hdbclient
Once the clean-up was finished and the install was restarted, it installed without any issues.
Thanks,
~ terry o.
NOTE: Updated path 03/09/2015

[solved] Filesystem check fail - Cannot access LVM Logical Volumes

I am getting a "File System Check Failed"on startup, I recently did a full system upgrade but I'm not entirely sure that the cause of the issue as I don't reboot very often.
I get the error right before this line is echo'ed out:
/dev/mapper/Arch_LVM-Root:
The super block could not be read or does not describe a correct ext2 filesystem...
this is odd because the only ext2 filesystem I have is on an non-LVM boot partition...
I can log-in and mount / as read/write and I can activate LVM with
modprobe dm-mod
and
vgchange -ay Arch_LVM
and they show up in lvdisplay but their status is "NOT available"
I just need to mount these logical volumes so I can retrieve some personal data in my home directory, I am also hesitant to use LVM again if I can't retrieve my data.
any suggestions?
Last edited by action_owl (2010-08-15 02:15:58)

I just popped in the install disk and was able to mount and access the LVM groups as expected, something must have been wonky with my filesystem

[Solved (initscripts-splash plroblem)] Filesystem check failed

Hello, my arch i686 sudently doesn't boot.
At system start, after loading kernel, the boot process stops and says "FILESYSTEM CHECK FAILED" give root password for maintenance or control+D for restart.
My root partition (dev/sda2) is reiserfs formated, and arch updated this week.
After reading a while I booted with Arch install CD and tried the follwing:
fsck.reiserfs --check /dev/sda2
fsck.reiserfs --fix-fixable /dev/sda2
fsck.reiserfs --rebuild-sb /dev/sda2
fsck.reiserfs --clean-attributes /dev/sda2
But no errors were found or fixed, so I can't boot arch yet.
Are there any other way to fix the filesystem?
can filesystem check be skipped?
please help
Last edited by juan_sck (2008-10-13 11:09:17)

Mektub wrote:
Could it be that it is anoter partition that is giving trouble ? Ot do you only have /dev/sda2 ?
Or start in sinle-user. At the grub boot menu, select the option that lets you edit the kernel parameters.
Add either a '1' or 'single' to the end of the kernel parameters, then continue booting up.
Mektub
of course I know where I installled Arch.
pointone wrote:There should be a more descriptive error message above where it says "filesystem check failed" describing WHY the fsck failed.
No, just system check failed. Even more, my filesystem was perfectly, it was a problem with initscripts-splash
iDeJ wrote:
i had a similar problem after the last pacman -Syu, basicly the bootsplash-initscripts are not compatible with latest udev
maybe it helps
http://bbs.archlinux.org/viewtopic.php?id=56604
I don't think installing a year old initscripts package would solve it, but you were very helpful.
Finally I could solve it with the recovery console:
After the error message I typed root password to log in, then remounted root partition for r/w:
mount -n -o remount,rw /
Finally I had to remove the package initscripts-splash and install initscripts form core.
ifconfig eth0 up
dhcpcd eth0
pacman -Syu
pacman -Rs initscripts-splash
pacman -S initscripts
exit
**You should make a backup of rc.conf before installing initscripts, because installing initscrips will overwrite it (and a few other files i hadn't modified), and pacman was supoussed to back it up, but it didn't
thanks for your help.

File Systen Check Fail

I keep getting a file system check fail after a new install:
The error message states that "/dev/hda3 could not be read or does not describe a correct ext2 filesystem"
/dev/hda3 was setup as ext4 and as /, so I can't really believe this error message.

Thanks rockin turtle, I did a standard reinstall instead of legacy like you suggested:
Even though my system didn't have sata, the correct approach was to do a standard install instead of "Legacy IDE".
This appears to be a bug in the installer right? I couldn't find it in the bug tracker.

Always failed during operating system checking while installing NetWeaver.

I have installed NetWeaver Composition Envrionment Sneak Preview - Java EE only but always failed during operating system checking. Does this version not support Window XP Professional SP2? This is mostly used window system.

I checked the instruction and comfirmed that it does support Window XP Professional (SP2):
System Requirements
<b>Windows XP Professional (Service Pack 2)</b> or Windows 2003 Server (Service Pack 1)
<b>This version runs on Windows XP (SP2)</b> with password accounts and Windows Server 2003 (32bit)
NTFS file system
Micrsoft Internet Explorer 6.0 or higher, or Firefox 1.0 or higher
Min. 1 GB, recommended 2 GB RAM
7 GB free hard disc space
Download file 1.8 GB
1.5 GHz PC or higher
Monitor 1024x768 pixels or more, 256 colors
Internet access (for CE online documentation)
If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
To use SAP Interactive Forms by Adobe, you must install the necessary credential file and activate it using a unique password. Download the latest credential and passwort from SDN

System Update 3.14 install fails on action: SetVendorValue

Hi, folks:
I'm attempting to install System Update 3.14 for the first time on a 2004-vintage ThinkPad T42 type 2379-DXU. The immediate failure appears to be that the action "SetVendorValue" fails. I'm not sure what the underlying cause is. The installation terminates with an alert that installation failed and the system is unchanged; but in fact the System Update application is installed and there's an icon in my Start menu. When I try to run System Update, it displays an error message in front of the splash screen and quits.
Details and log excerpts below. Can anyone figure out why the install is failing? How can I get the install to succeed and the System Update app to run successfully? Thanks in advance for any ideas.
In the meantime, I'm going to try downloading individual drivers manually, to solve my underlying problem. But I'd sure like to have System Update on my side in the future.
--Jim DeLaHunt, Vancouver, Canada
Details* run the installer "systemupdate314-2008-5-15.exe".
* installation proceeds through several steps. Shortly after the "Writing vendor value" status message appears, the installation fails with an error alert saying that that installer cannot complete and the system is unchanged.
* in fact, there is now a c:\Program Files\Lenovo\System Update\ folder, and a System Update icon under Start menu -> All Programs -> ThinkVantage -> System Update.
* clicking the System Update icon in the start menu causes the program to launch and fail. The splash screen appears, then an alert "System Update could not start properly [OK]". Clicking [OK] causes the program to exit.
Log exceprts:
The apparently relevant bit of the install log C:\Documents and Settings\<user>\Local Settings\Temp\tvsuSetup.log reads,
.... [front 90% of log omitted] ...
Action 22:35:32: reloadsched.exe. reloadsched.exe
MSI (s) (14:B8) [22:35:32:402]: Executing op: CustomActionSchedule(Action=reloadsched.exe,ActionType=1122,,Target=C:\Program Files\Common Files\Lenovo\Scheduler\reloadsched.exe,)
MSI (s) (14:B8) [22:35:32:432]: Note: 1: 1721 2: reloadsched.exe 3: 4: C:\Program Files\Common Files\Lenovo\Scheduler\reloadsched.exe
Info 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Action: reloadsched.exe, location: , command: C:\Program Files\Common Files\Lenovo\Scheduler\reloadsched.exe
MSI (s) (14:B8) [22:35:32:432]: Executing op: ActionStart(Name=InstallFinalize,,)
Action 22:35:32: InstallFinalize.
MSI (s) (14:B8) [22:35:32:432]: Executing op: CleanupTempFiles(TempFiles=C:\WINDOWS\Installer\11f23a.mst)
MSI (s) (14:B8) [22:35:32:432]: Scheduling file 'C:\WINDOWS\Installer\11f23a.mst' for deletion during post-install cleanup (not post-reboot).
MSI (s) (14:B8) [22:35:32:432]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=43819590)
MSI (s) (14:B8) [22:35:32:682]: User policy value 'DisableRollback' is 0
MSI (s) (14:B8) [22:35:32:682]: Machine policy value 'DisableRollback' is 0
Action 22:35:32: RollbackCleanup. Removing backup files
RollbackCleanup: File: C:\Config.Msi\11f23e.rbf
MSI (s) (14:B8) [22:35:32:702]: Calling SRSetRestorePoint API. dwRestorePtType: 0, dwEventType: 103, llSequenceNumber: 402, szDescription: "".
MSI (s) (14:B8) [22:35:32:702]: The call to SRSetRestorePoint API succeeded. Returned status: 0.
MSI (s) (14:B8) [22:35:32:702]: Unlocking Server
MSI (s) (14:B8) [22:35:32:702]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
Action ended 22:35:32: InstallFinalize. Return value 1.
MSI (s) (14:B8) [22:35:32:702]: Doing action: SetVendorValue
Action 22:35:32: SetVendorValue. SetVendorValue
Action start 22:35:32: SetVendorValue.
MSI (s) (14:34) [22:35:32:713]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI25.tmp, Entrypoint: SetVendorValue
6/29/2008 22:35:32 DualSkins set to 0
6/29/2008 22:35:32 szValue set to THINK
6/29/2008 22:35:32 Unable to set key value: Vendor
Action ended 22:35:32: SetVendorValue. Return value 3.
Action ended 22:35:32: INSTALL. Return value 3.
... [snip]...
MSI (s) (14:B8) [22:35:32:953]: Attempting to delete file C:\WINDOWS\Installer\11f23a.mst
MSI (s) (14:B8) [22:35:32:953]: Unable to delete the file. LastError = 32
MSI (s) (14:B8) [22:35:32:963]: MainEngineThread is returning 1603
MSI (s) (14:04) [22:35:32:963]: Destroying RemoteAPI object.
MSI (s) (14:68) [22:35:32:963]: Custom Action Manager thread ending.
MSI (c) (E8:10) [22:35:32:973]: Back from server. Return value: 1603
MSI (c) (E8:10) [22:35:32:973]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E8:10) [22:35:32:973]: PROPERTY CHANGE: Deleting SECONDSEQUENCE property. Its current value is '1'.
Action ended 22:35:32: ExecuteAction. Return value 3.
MSI (c) (E8:10) [22:35:32:973]: Doing action: SetupCompleteError
Action 22:35:32: SetupCompleteError.
Action start 22:35:32: SetupCompleteError.
Action 22:35:32: SetupCompleteError. Dialog created
MSI (c) (E8:18) [22:35:40:544]: Doing action: ISSetupFilesCleanup
Action 22:35:40: ISSetupFilesCleanup.
Action start 22:35:40: ISSetupFilesCleanup.
MSI (c) (E8:AC) [22:35:40:544]: Invoking remote custom action. DLL: C:\DOCUME~1\JIMDEL~1\LOCALS~1\Temp\MSI26.tmp, Entrypoint: SFCleanupEx
Action ended 22:35:40: ISSetupFilesCleanup. Return value 1.
Action ended 22:35:40: SetupCompleteError. Return value 2.
Action ended 22:35:40: INSTALL. Return value 3.
... [snip] ....
=== Logging stopped: 6/29/2008 22:35:41 ===
MSI (c) (E8:10) [22:35:41:175]: Note: 1: 1708
MSI (c) (E8:10) [22:35:41:175]: Product: System Update -- Installation operation failed.
MSI (c) (E8:10) [22:35:41:195]: Attempting to delete file C:\DOCUME~1\JIMDEL~1\LOCALS~1\Temp\11ce5a.mst
MSI (c) (E8:10) [22:35:41:195]: Unable to delete the file. LastError = 32
MSI (c) (E8:10) [22:35:41:195]: Grabbed execution mutex.
MSI (c) (E8:10) [22:35:41:195]: Cleaning up uninstalled install packages, if any exist
MSI (c) (E8:10) [22:35:41:205]: MainEngineThread is returning 1603
=== Verbose logging stopped: 6/29/2008 22:35:41 ===
The log from the failed startup of TVSU at
C:\Program Files\Lenovo\System Update\logs\tvsu_log_080629230655.txt
reads:
[ThinkVantage System Update build: 2008-5-15 3.14.0008] 6/29/2008 11:06:55 PM
Severe 2008-06-29 , 11:06:55
at Tvsu.Util.RegistryUtil.Execute(String[] args)
Message: Error occurred in registry operation, error message: Access to the registry key 'HKEY_LOCAL_MACHINE\Software\Lenovo\System Update' is denied.
Severe 2008-06-29 , 11:06:55
at Tvsu.Util.RegistryUtil.Execute(String[] args)
Message: Error occurred in registry operation, error message: Access to the registry key 'HKEY_LOCAL_MACHINE\Software\Lenovo\System Update\Preferences\UCSettings\RunTime' is denied.
Severe 2008-06-29 , 11:06:55
at Tvsu.Gui.GUIManager.StartGUI()
Message: Exception not expected was received.System.NullReferenceException: Object reference not set to an instance of an object.
at Tvsu.Environment.EnvironmentManager..ctor()
at Tvsu.Environment.EnvironmentManager.get_Instance()
at Tvsu.Gui.GUIManager.InitializeGUI()
at Tvsu.Gui.GUIManager.StartGUI()
Severe 2008-06-29 , 11:06:55
at Tvsu.Gui.FlowScreens.Messages.SetButtons(Int32 formwidth)
Message: No Nls object was found, using hardcoded 'OK'
Exception:
Message: Object reference not set to an instance of an object.
Type: System.NullReferenceException
at Tvsu.Gui.FlowScreens.Messages.SetButtons(Int32 formwidth)
Info 2008-06-29 , 11:06:55
at Tvsu.Gui.FlowScreens.Messages.ShowStaticMessage(String message, String title, String mastheadtext, MessageType t, Boolean check)
Message: Showing ERROR Message: < System Update could not start properly. >
[End of details]

Well, the problem is solved, and System Update is installed and working.
The root cause of the problem appeared to be that the registry directory HKEY_LOCAL_MACHINE\SOFTWARE no longer extended "full control" permission to the Administrators user group on my machine. We fixed this by using regedit:
Start... Run... regedit....
select directory HKEY_LOCAL_MACHINE\SOFTWARE, right-click, Permissions...,
press Add... button
enter SYSNAME\Administrators in the text area (SYSNAME is a placeholder for my actual machine name)
OK... OK...
Quit regedit
We diagnosed the problem with the help of IT support from our employer. The problem was blocking installation of new anti-virus software. We had just removed old anti-virus and "internet security" software. Hmm, I wonder if the old security software removed this permission setting as a parting gift.
Hope this is helpful for others who encounter the same symptoms.

Errors when installing os x 10.4- Invalid sibling link-volume check failed

I am trying to upgrade my PowerPC G4 from OS x 10.2.8 to 10.4. I bought the Tiger Retail DVD. The install disc boots and runs, but near the end of installation, I get " Error Installing Software- Please try installing again" I opened the disk utility on the installer and tried first aid- which failed.
"Invalid Sibling Link"
"Volume check failed"
Error: The underlying task reported failure on exit
HFS volume checked
1 volume could not be repaired because of an error
I tried first aid repeatedly with no luck. I tried the fsck repair suggested in one of the discussion forums "fsck -fy"
again, "volume check failed"
I'm looking to buy DiskWarrior as suggested, but am curious about another option I've read about. I found a macosxhints website http://www.macosxhints.com/article.php?story=20070204093925888
that suggests running the install disk, clicking on terminal and unmounting the drive that the OS system "lives on". If I do this, will I lose the data already on my computer? The hint does not talk about how to remount the drive.
I am NOT computer savvy. Would this be getting in over my head? It sounds simple enough, but I don't want to do any irreversible damage. Should I just buy disk warrior, or would the safest bet be to buy an external hard drive and back up everything, then perform an erase an install with Tiger?
Any help would be MUCH appreciated!!!

Hi confused- I just fixed my invalid sibling link error on my HD. Stop using your HD!
It will only get radically worse. I went to http://www.alsoft.com/DiskWarrior/ to see which version of Disk Warrior I needed which was 4.1. Then I went to a retail store & bought the CD $99. On the box, it must say 4.0 with 4.1 included + CD rev 42. You must use the CD as the download won't boot up your HD. In the box is a 1-pager of simple instructions. Put disk in CD drive, follow instructions, click rebuild HD, wait 15 minutes. My HD is perfect!!!now. It fixed permissions, rebuilt my directory, fixed my CS3 Adobe applications, fixed corrupted prefs, found & restored ALL files. I lost nothing! Plus made a PDF detailed report. Best $99 i ever spent. Good luck!

System check fails on install

Similar Messages

Maybe you are looking for