System config folder

I went to a Genius today because of some Airport issues I was having. He fixed my problem by deleting my system config folder. Out of curiosity where was the folders original location? I can't find it.

It's /Library/Preferences/SystemConfiguration. It will rebuilt itself with default settings if removed.
Note that that's the Library folder at the top of your hard drive, not the one in your home folder.
Matt

Similar Messages

How can i get the path to config folder placed inside the jar file?

Hi i have developed an RCP application using eclipse.
In my application config directory is there.
When i export my RCP application as JNLP Project the jar file is created which contains config folder inside it.
When i download the application using java web start , how can i get the path to config folder placed inside the jar file?
Will the config folder exists in local cache in my system?
Help needed.
-Deepak

-- This works in CS6:
tell application "Adobe InDesign CS6"
set myDocument to active document
set selectedRectangles to selection of myDocument
set theGraphicsLink to file path of item link of (graphic 1 of (item 1 of selectedRectangles))
--> "Macintosh HD:folder/folder/filename.tif"
end tell

HT1365 system config chuck

I had trouble connecting to the internet. I made an appointment with apple store, took my imac in. they ran diagnostic and found no problems. but reformatted the disk for me using time machine. i brought it home and it worked. then when i put the mac to sleep and came backto using it, the internet was gone. so i called apple store and they said try deleting the system configuration folder under library - preferences - system config. i did that. then restarted and the internet worked. now i have to do this all the time to connect.
what should i do? please help.

Hello Hackintosh.
Basically i have connection problems. every time i put the imac to sleep or shut it down, when i start it back up, the web browser says, you are not connected to the internet, please connect to the network. the air port icon at the top shows full strength. but the browser says its not connected to the internet.
when i click on network diagnostic from with in the brower, it shows the ethernet is connected and the wifi has an ip address.
then i have to close everything, go into library > preferences > and delete the system configuration folder and restart. when i restart the airport icon is light gray. its not connected. i click and hover over the airport sign and it picks up my wifi connection. i give it a min before opening the browser.
when i open the browser, i have the same error message. you are not connected to the internet. then there is the network diagnostic button below the error message.
sometimes i have to restart multiple times (around 3-4) and again go back into the preferences folder and delete the system configuration folder. some times it doesnt work how many times i do this.
everything was working fine till i removed the ethernet connection to clean the desk. then all **** broke loose. this is getting annoying.
i booked an appointment with the apple store and they ran diagnostics and everything came back negative. it picked up the wifi in the store right away and they could browse. they connected an ethernet cable and it worked. they booted it up from the network menu for this.
then they booted my computer the normal way and they ran into the same problem. so they reformatted my hard disk and reintstalled OS X Lion.
now i have OS X Mountain Lion and i still have the same problems. cant be virus because when the hard disk was wiped clean, it would have wiped the virus out too......at least i think it would have.
could you help? i have extended warranty from best buy on this mac so i will take it to them to have a look aswell. but i want to see if i can fix this myself. dont feel like lugging this thing around everywhere.
hope to hear from you soon.

Bad system config info

Hello,
OS WIN 8.1
HP Pavillion
I got this message Bad system config info on a blue screen. I can't boot up the OS, even tried safe mode and nothing works. Tried Refresh and nothing.
I need to access my documents and using HP recovery manager with flash usb stick, trying to copy the documents i need to save, but at times it tells me No USb is connected.
There is a problem I just can't get, I tried so many things, Extensive Stress test, passed. Chkdsk /r, no problem. It tells me the computer is locked, or Antivirus is running....Can anyone pls help/
\TKS
Desperate to fix this

When trying to back up files I assume you aren't attempting backing up to same flash drive that contains HP Recovery?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Final Cut Pro System support folder missing

I downloaded a cool plug in for a aged film look but I cannot find the "Final Cut Pro System support folder" in which i have to place this plug-in.
Any Ideas?

*Hard Drive/Library/Application Support/Final Cut Pro System Support.*
Your plugin goes into the Plugins folder.
You will need to authenticate with an Admin password to modify the folder.

Move System Preferences Help file back into System Preferences folder?

How do I move System Preferences Help file back into System Preferences folder. I unintentionally moved it. My Mac blocks putting it back. Suggestions? Thanks!

Somehow I managed to delete my System Preferences shortly after upgrading, and was able to use the 10.4 one for a while until I applied the patch. Luckily, I already had Pacifist, and with your directions I was able to get close enough so that I could find the Applications folder within the ContentsofEssentialsSystemSoftwareGroup > ContentsofEssentials.pkg > Applications > SystemPreferences.app.
For that, I owe you the deepest gratitude and a gigantic THANK YOU. My System Preferences is now fully reinstalled and working wonderfully.
Pacifist might actually be worth purchasing.

System Preferences Folder

I've lost my System Preferences folder on my mac & need to know how to get it back.

Welcome!
This may not be the same problem at all - it's hard to tell from what the OP has posted so far!
In your case, if the application is still there but won't open, it would probably not help to use Pacifist to reinstall it.
It may be that your system needs little more than a bit of maintenance. Try repairing permissions with Disk Utility (in Applications>Utilities), and if that doesn't work, download a copy of YASU from www.versiontracker.com and set it to run all tasks, then leave the system alone for about 10 minutes while it runs and reboots. Reboot will take longer than usual and the system will appear slow after that for a few minutes, but that should fix it.
If it does not, download a copy of Preferential Treatment (again from versiontracker) and set it to scan both system-level and user-level properly lists. If it finds any that are problematic, let it remove them.
If none of the above helps, post back with details of what you did and what happened.

TA20605 the system preferences folder is missing

Until step 9 everything works ok but at step 10 after I shoose ''all applications'' and locate the application folder, I can 't find the system preferences folder anywhere. What should i do?

Are you really using Mac OS X 10.1? If not, please state the Mac OS X version. If you select About This Mac (from the Apple menu), it should show the version of Mac OS X.
System Preferences is not a folder. It is an application. If it is not in the Applications folder, you may have accidentally deleted it, or maybe moved it, or maybe renamed it.

System-config-display, gnome-display-properties - inconsistent R5 U5 64bit

Hi all,
I have OEL Rel 5 U5 (64-bit) installed and running on an IBM x3200 which has Radeon integrated graphics, with a IBM ThinkVision LCD monitor (1280x1024 max)
Problem I have is eventhough system-config-display lets me select 1280x1024 I can't actually get it to switch. Upon log-off/log-in, reboot, restart, etc... it still returns to 1024x768 mode.
Running gnome-display-properties only gives me a choice of 1024x768, 800x600, or 640x480.
I've also tried xrandr and trying to force it to 1280x1024 but it tells me I only have the 3 choices given by gnome-display-properties.
My xorg.conf file is configured with 1280x1024, 1024x768, and 800x600 modes, so I'm baffled at where gnome-display-properties and xrandr are getting their mode choices...
Can anyone shed some light on this?

Based on Xorg log I'm guessing the monitor driver just will not support the higher res and apparently that's where 'gnome-display-properties' gets its info regardless of what I try in Xorg.conf.
I'll see if I can manipulate the monitor settings and see where that gets me...
I see the following in the log:
(II) RADEON(0): Monitor1 EDID data ---------------------------
(II) RADEON(0): Manufacturer: IBM Model: 29a Serial#: 16843009
(II) RADEON(0): Year: 2003 Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 30 vert.: 23
(II) RADEON(0): Gamma: 1.00
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz Image Size: 300 x 225 mm
(II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Serial No: Reserved
(II) RADEON(0): Monitor name: IBM RSA2
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): DFP table revision: 3
(II) RADEON(0): Panel infos found from DDC detailed: 1024x768
(II) RADEON(0): Valid Mode from Detailed timing table: 1024x768
(II) RADEON(0): Valid Mode from standard timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Total of 12 mode(s) found.
Here's video info from lspci:
0a:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])
     Subsystem: IBM Unknown device 0325
     Flags: bus master, stepping, fast Back2Back, medium devsel, latency 66, IRQ 11
     Memory at d8000000 (32-bit, prefetchable) [size=128M]
     I/O ports at 6000 [size=256]
     Memory at d0800000 (32-bit, non-prefetchable) [size=64K]
     [virtual] Expansion ROM at d0820000 [disabled] [size=128K]
     Capabilities: [50] Power Management version 2
Xorg.conf:
# Xorg configuration created by system-config-display
Section "ServerLayout"
     Identifier "single head configuration"
     Screen 0 "Screen0" 0 0
     InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
     Identifier "Keyboard0"
     Driver "kbd"
     Option     "XkbModel" "pc105"
     Option     "XkbLayout" "us"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
     Identifier "Monitor0"
     ModelName "LCD Panel 1280x1024"
### Comment all HorizSync and VertSync values to use DDC:
     HorizSync 31.5 - 64.0
     VertRefresh 56.0 - 65.0
     Option     "dpms"
EndSection
Section "Device"
     Identifier "Videocard0"
     Driver "radeon"
     Option     "AccelMethod" "UXA"
EndSection
Section "Screen"
     Identifier "Screen0"
     Device "Videocard0"
     Monitor "Monitor0"
     DefaultDepth 16
     SubSection "Display"
          Viewport 0 0
          Depth 24
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
     SubSection "Display"
          Viewport 0 0
          Depth 16
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
EndSection

Rman backup in system dated folder

hi all,
I need to store the rman backup in linux as system dated folder.
I created folder
*#mkdir /bkp/$(date +%Y%m%d)*
and tried this,
RMAN>backup database format='/bkp/$(date +%Y%m%d)/db_%d';
not working, how to solve this.
thanks in advance
sarathi

dba_sara wrote:
hi all,
I need to store the rman backup in linux as system dated folder.
I created folder
*#mkdir /bkp/$(date +%Y%m%d)*
and tried this,
RMAN>backup database format='/bkp/$(date +%Y%m%d)/db_%d';
not working, how to solve this.
thanks in advance
sarathiIf you allow your backups to go to the fra, oracle will do this for you. dated folders are an inherent part of how oracle manages the fra. You are trying to reinvent the wheel.

System-config-printer-gnome freezes when trying to "Add" a printer

I have the same issue that was discussed in the thread system-config-printer-gnome utility freezes when "adding" printer. Specifically, when I try to add a printer using system-config-printer gui, the window freezes and throws back the following code:
mechoid9@ordinateur:~$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/asyncipp.py", line 196, in send_reply
handler (self._conn, result)
File "/usr/share/system-config-printer/asyncpk1.py", line 143, in _ipp_reply_handler
self._client_reply_handler (self._conn, *args)
File "/usr/share/system-config-printer/asyncconn.py", line 142, in <lambda>
kwds["reply_handler"] = lambda c, r: reply_handler (self, r)
File "/usr/lib/python2.7/site-packages/cupshelpers/cupshelpers.py", line 582, in _reply_handler
self._client_reply_handler (connection, devices)
File "/usr/share/system-config-printer/system-config-printer.py", line 4845, in <lambda>
current_uri))
File "/usr/share/system-config-printer/system-config-printer.py", line 4881, in local_devices_reply
self.add_devices (result, current_uri)
File "/usr/share/system-config-printer/system-config-printer.py", line 5228, in add_devices
physdev = model.get_value (iter, 1)
TypeError: iter must be a GtkTreeIter
The solution mentioned was to use the CUPS web interface. This lets me add a printer (which is part of the solution), this is not the complete solution. I've used the utility before, and I'm comfortable with it, and I think that I should be able to use the gnome utility to add the printer if everything on my system is up to date (which it is, as of this posting). I would like to know why it doesn't work anymore (and I'm of the impression that it has something to do with how I've installed python on my system).
I've googled the issue, and perhaps I didn't look around thoroughly enough, but I couldn't find a solution. So if somebody knows where to look I'd be glad to look there.

I have the same problem. I noticed that it occured only after installing the following driver packages.
hpoj-0.91-16 hplip-3.11.3-1 net-snmp-5.6.1-1 foomatic-db-engine-4.0.6_20101215-1 foomatic-db-4.0.6_20101215-1
I did a workaround by installing the printer using the webinterface, removing the drivers again, setting the samba login details and then reinstalling the drivers.
But this problem should really be fixed.

System tools folder is empty - How can I restore the items?

Hi
MY System tools folder is empty.
Is there any way of restoring the items such as System restore, backup, scheduled tasks etc.
All these are accessible by other routes
Regards Fred

I have zipped up the folder on my computer and I have uploaded it to a filehost for you.
All you need to to is:
1. Visit http://www.filehost.gr/593219 , scroll to the bottom, wait 1 minute for your session to activate and download.
2. Unzip the files in the folder.
3. Cut the files and right click Start Menu and select Explorer All Users, find the System Tools folder and insert the items there.
If you notice the programs don't work, then there are some corruptions in your XP and you can either try and fix manually or I recommend doing a format with the restore disk as a safe bet to fix all problems on the computer - back up all your files to an external HDD or CD/DVD if you do though.
Good luck.

Time machine in professional applications + system home folder quetions

this is a two fold question....
1) can time machine create a backup of a pure data disk? If so it sounds like just getting two fast drives one for data and another for the data time machine volume.
2) I am replacing my system drive with a WD raptor. I want to have my system 100% isolated, and right now its only 90% so. Is there a way I can actually set my system Home folder to be on another disk?
thanks,
~sam

Apple makes it easy. Unlock Account settings and control + click on your account for advanced options. Set to the location of home folder. Previously was done in NetInfo Manager.
The WD 750GB Caviar also makes an excellent boot drive, or Time Machine, which will backup any drive.
Boot drive, data drive, scratch/editing, I went with TM internal but also have a couple external that I use so I don't have just one in case it has a problem, backup the backups.

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

System config network error while parsing /etc/hosts

I am configuring RAC on Oracle Linux,i have configured /etc/hosts on both nodes,when ever i opened network, its displaying error message.
system config network error while parsing /etc/hosts
wrong ip on line 25
wrong ip on line 26
wrong ip on line 27
here is my host entries.
node1
====
[root@racnode1 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost
#####Public#####
192.168.1.101 racnode1.reg.com racnode1
192.168.1.102 racnode2.reg.com racnode2
192.168.1.103 racnode3.reg.com racnode3
192.168.1.104 racnode4.reg.com racnode4
####Private######
10.10.1.1 racnode1-priv.reg.com racnode1-priv
10.10.1.2 racnode2-priv.reg.com racnode2-priv
10.10.1.3 racnode3-priv.reg.com racnode3-priv
10.10.1.4 racnode4-priv.reg.com racnode4-priv
#####Virtual#####
192.168.1.201 racnode1-vip.reg.com racnode1-vip
192.168.1.202 racnode2-vip.reg.com racnode2-vip
192.168.1.203 racnode3-vip.reg.com racnode3-vip
192.168.1.204 racnode4-vip.reg.com racnode4-vip
#SCAN
#192.168.1.301 racdb-scan.reg.com racdb-scan
#SCAN
192.168.1.301 racnode1-scan.reg.com racnode1-scan
192.168.1.302 racnode2-scan.reg.com racnode2-scan
192.168.1.303 racnode3-scan.reg.com racnode3-scan
[root@racnode1 ~]# hostname
racnode1.reg.com
[root@racnode1 ~]#
node2 host entries
===========
[root@racnode2 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost
#####Public#####
192.168.1.101 racnode1.reg.com racnode1
192.168.1.102 racnode2.reg.com racnode2
192.168.1.103 racnode3.reg.com racnode3
192.168.1.104 racnode4.reg.com racnode4
####Private######
10.10.1.1 racnode1-priv.reg.com racnode1-priv
10.10.1.2 racnode2-priv.reg.com racnode2-priv
10.10.1.3 racnode3-priv.reg.com racnode3-priv
10.10.1.4 racnode4-priv.reg.com racnode4-priv
#####Virtual#####
192.168.1.201 racnode1-vip.reg.com racnode1-vip
192.168.1.202 racnode2-vip.reg.com racnode2-vip
192.168.1.203 racnode3-vip.reg.com racnode3-vip
192.168.1.204 racnode4-vip.reg.com racnode4-vip
#SCAN
#192.168.1.301 racdb-scan.reg.com racdb-scan
#SCAN
192.168.1.301 racnode1-scan.reg.com racnode1-scan
192.168.1.302 racnode2-scan.reg.com racnode2-scan
192.168.1.303 racnode3-scan.reg.com racnode3-scan
[root@racnode2 ~]#
i am not able to ping racnode1-priv or racnode2-priv.
from node1:
========
[root@racnode1 ~]# ping racnode2-priv
PING racnode2-priv.reg.com (10.10.1.2) 56(84) bytes of data.
From racnode1-priv.reg.com (10.10.1.1) icmp_seq=2 Destination Host Unreachable
From racnode1-priv.reg.com (10.10.1.1) icmp_seq=3 Destination Host Unreachable
From racnode1-priv.reg.com (10.10.1.1) icmp_seq=4 Destination Host Unreachable
5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4002ms
, pipe 3
[root@racnode1 ~]#
from node2:
=======
[root@racnode2 ~]# ping racnode1-priv
PING racnode1-priv.reg.com (10.10.1.1) 56(84) bytes of data.
From racnode2-priv.reg.com (10.10.1.2) icmp_seq=2 Destination Host Unreachable
From racnode2-priv.reg.com (10.10.1.2) icmp_seq=3 Destination Host Unreachable
From racnode2-priv.reg.com (10.10.1.2) icmp_seq=4 Destination Host Unreachable
--- racnode1-priv.reg.com ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2999ms
, pipe 3
[root@racnode2 ~]#
any idea where configuration went wrong.
Thanks

here is output, i can see lot of additional characters.
[root@racnode1 ~]# cat -vet /etc/hosts
# Do not remove the following line, or various programs$
# that require network functionality will fail.$
127.0.0.1 localhost.localdomain localhost$
#::1^I^Ilocalhost6.localdomain6 localhost$
$
#####Public#####$
192.168.1.101 racnode1.reg.com racnode1$
192.168.1.102 racnode2.reg.com racnode2$
192.168.1.103 racnode3.reg.com racnode3$
192.168.1.104 racnode4.reg.com racnode4$
####Private######$
10.10.1.1 racnode1-priv.reg.com racnode1-priv$
10.10.1.2 racnode2-priv.reg.com racnode2-priv$
10.10.1.3 racnode3-priv.reg.com racnode3-priv$
10.10.1.4 racnode4-priv.reg.com racnode4-priv$
#####Virtual#####$
192.168.1.201 racnode1-vip.reg.com racnode1-vip$
192.168.1.202 racnode2-vip.reg.com racnode2-vip$
192.168.1.203 racnode3-vip.reg.com racnode3-vip$
192.168.1.204 racnode4-vip.reg.com racnode4-vip$
#SCAN$
#192.168.1.301 racdb-scan.reg.com racdb-scan$
#SCAN$
192.168.1.301^Iracnode1-scan.reg.com^Iracnode1-scan$
192.168.1.302^Iracnode2-scan.reg.com^Iracnode2-scan$
192.168.1.303^Iracnode3-scan.reg.com^Iracnode3-scan$
[root@racnode1 ~]#
from node2:
========
[root@racnode2 ~]# cat -vet /etc/hosts
# Do not remove the following line, or various programs$
# that require network functionality will fail.$
127.0.0.1 localhost.localdomain localhost$
#::1^I^Ilocalhost6.localdomain6 localhost$
$
#####Public#####$
192.168.1.101 racnode1.reg.com racnode1$
192.168.1.102 racnode2.reg.com racnode2$
192.168.1.103 racnode3.reg.com racnode3$
192.168.1.104 racnode4.reg.com racnode4$
####Private######$
10.10.1.1 racnode1-priv.reg.com racnode1-priv$
10.10.1.2 racnode2-priv.reg.com racnode2-priv$
10.10.1.3 racnode3-priv.reg.com racnode3-priv$
10.10.1.4 racnode4-priv.reg.com racnode4-priv$
#####Virtual#####$
192.168.1.201 racnode1-vip.reg.com racnode1-vip$
192.168.1.202 racnode2-vip.reg.com racnode2-vip$
192.168.1.203 racnode3-vip.reg.com racnode3-vip$
192.168.1.204 racnode4-vip.reg.com racnode4-vip$
#SCAN$
#192.168.1.301 racdb-scan.reg.com racdb-scan$
#SCAN$
$
192.168.1.301^Iracnode1-scan.reg.com^Iracnode1-scan$
192.168.1.302^Iracnode2-scan.reg.com^Iracnode2-scan$
192.168.1.303^Iracnode3-scan.reg.com^Iracnode3-scan$
Edited by: Endeca on Apr 7, 2013 10:13 AM

System config folder

Similar Messages

Maybe you are looking for