System-config-printer

Hello,
my system will not upgrade because of problems with the package system-config-printer.
Here is the message I get:
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/__init__.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/openprinting.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/ppds.pyc exists in filesystem
Errors occurred, no packages were upgraded.
What should I do? Remove the files that cannot be replaced because already existing or is there another way?
Thanks

Same issue here.
pacman reports that the files aren't owned by a package.
Around the mtime of each of the files I had installed some printer related packages (gutenprint, ghostscript, etc.). pacman.log excerpt included.
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/__init__.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/openprinting.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/ppds.pyc exists in filesystem
Errors occurred, no packages were upgraded.
eckythump:~$ sudo pacman -Qo /usr/lib/python2.6/site-packages/cupshelpers/{__init__,cupshelpers,openprinting,ppds}.pyc
error: No package owns /usr/lib/python2.6/site-packages/cupshelpers/__init__.pyc
error: No package owns /usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.pyc
error: No package owns /usr/lib/python2.6/site-packages/cupshelpers/openprinting.pyc
error: No package owns /usr/lib/python2.6/site-packages/cupshelpers/ppds.pyc
eckythump:~$ ls -l /usr/lib/python2.6/site-packages/cupshelpers/{__init__,cupshelpers,openprinting,ppds}.pyc
-rw------- 1 root root 1306 2008-12-13 11:15 /usr/lib/python2.6/site-packages/cupshelpers/__init__.pyc
-rw------- 1 root root 25916 2008-12-13 11:15 /usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.pyc
-rw------- 1 root root 12314 2008-12-13 11:15 /usr/lib/python2.6/site-packages/cupshelpers/openprinting.pyc
-rw------- 1 root root 27712 2008-12-13 11:15 /usr/lib/python2.6/site-packages/cupshelpers/ppds.pyc
##### /var/log/pacman.log
[2008-12-13 11:08] installed cscope (15.6-2)
[2008-12-13 11:08] installed ctags (5.7-1)
[2008-12-13 11:08] >>please run /usr/sbin/cups-genppdupdate
[2008-12-13 11:08] >>and restart cups deamon
[2008-12-13 11:08] installed gutenprint (5.2.2-1)
[2008-12-13 11:08] installed lsof (4.81-1)
[2008-12-13 11:08] installed iotop (0.2.1-2)
[2008-12-13 11:08] installed libmikmod (3.1.12-1)
[2008-12-13 11:08] installed smpeg (0.4.4-4)
[2008-12-13 11:08] installed sdl_mixer (1.2.8-3)
[2008-12-13 11:08] warning: directory permissions differ on var/games/
filesystem: 775 package: 755
[2008-12-13 11:08] installed pinball (0.3.1-3)
[2008-12-13 11:08] installed lincity (1.12.1-2)
[2008-12-13 11:08] >>> Qemu package now provides standard qemu and qemu-kvm.
[2008-12-13 11:08]
[2008-12-13 11:08] >>> PLEASE READ FOR KVM USAGE!
[2008-12-13 11:08] >>> Load the correct KVM module, you will need a KVM capable CPU!
[2008-12-13 11:08] >>> Add yourself to the group 'kvm'.
[2008-12-13 11:08] >>> Use 'qemu-kvm' to use KVM.
[2008-12-13 11:08]
[2008-12-13 11:08] >>> 'qemu-kvm' flexibility:
[2008-12-13 11:08] >>> You can use the qemu-kvm binary without kvm module too.
[2008-12-13 11:08]
[2008-12-13 11:08] >>> PLEASE READ FOR KQEMU USAGE!
[2008-12-13 11:08] >>> You need to install the 'kqemu' package for your kernel.
[2008-12-13 11:08] >>> You need to load the module to use qemu with kqemu.
[2008-12-13 11:08] installed qemu (0.9.1-10)
[2008-12-13 11:08] installed strace (4.5.18-1)
[2008-12-13 11:08] installed unrar (3.8.5-1)
[2008-12-13 11:08] installed unzip (5.52-4)
[2008-12-13 11:08] ==> To use dvipdf, you need to install tetex:
[2008-12-13 11:08] ==> # pacman -S tetex
[2008-12-13 11:08] upgraded ghostscript (8.63-3 -> 8.63-3)
[2008-12-13 11:09] updating the filename database... done
[2008-12-13 11:09] upgraded texlive-core (2008.11313-1 -> 2008.11313-1)
[2008-12-13 11:11] synchronizing package lists
[2008-12-13 11:11] starting full system upgrade
[2008-12-13 11:16] installed perlxml (2.36-1)
[2008-12-13 11:16] installed perl-xml-simple (2.18-2)
[2008-12-13 11:16] installed icon-naming-utils (0.8.7-1)
[2008-12-13 11:16] installed gnome-icon-theme (2.24.0-1)

Similar Messages

System-config-printer-gnome freezes when trying to "Add" a printer

I have the same issue that was discussed in the thread system-config-printer-gnome utility freezes when "adding" printer. Specifically, when I try to add a printer using system-config-printer gui, the window freezes and throws back the following code:
mechoid9@ordinateur:~$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/asyncipp.py", line 196, in send_reply
handler (self._conn, result)
File "/usr/share/system-config-printer/asyncpk1.py", line 143, in _ipp_reply_handler
self._client_reply_handler (self._conn, *args)
File "/usr/share/system-config-printer/asyncconn.py", line 142, in <lambda>
kwds["reply_handler"] = lambda c, r: reply_handler (self, r)
File "/usr/lib/python2.7/site-packages/cupshelpers/cupshelpers.py", line 582, in _reply_handler
self._client_reply_handler (connection, devices)
File "/usr/share/system-config-printer/system-config-printer.py", line 4845, in <lambda>
current_uri))
File "/usr/share/system-config-printer/system-config-printer.py", line 4881, in local_devices_reply
self.add_devices (result, current_uri)
File "/usr/share/system-config-printer/system-config-printer.py", line 5228, in add_devices
physdev = model.get_value (iter, 1)
TypeError: iter must be a GtkTreeIter
The solution mentioned was to use the CUPS web interface. This lets me add a printer (which is part of the solution), this is not the complete solution. I've used the utility before, and I'm comfortable with it, and I think that I should be able to use the gnome utility to add the printer if everything on my system is up to date (which it is, as of this posting). I would like to know why it doesn't work anymore (and I'm of the impression that it has something to do with how I've installed python on my system).
I've googled the issue, and perhaps I didn't look around thoroughly enough, but I couldn't find a solution. So if somebody knows where to look I'd be glad to look there.

I have the same problem. I noticed that it occured only after installing the following driver packages.
hpoj-0.91-16 hplip-3.11.3-1 net-snmp-5.6.1-1 foomatic-db-engine-4.0.6_20101215-1 foomatic-db-4.0.6_20101215-1
I did a workaround by installing the printer using the webinterface, removing the drivers again, setting the samba login details and then reinstalling the drivers.
But this problem should really be fixed.

KDE - warning: cannot resolve "system-config-printer =1.1.7-3"

I'm trying to install KDE, fresh install, and this is what I get after: pacman -S kde
resolving dependencies...
warning: provider package was selected (freeglut provides glut)
warning: cannot resolve "system-config-printer>=1.1.7-3", a dependency of "kdeadmin-system-config-printer-kde"
warning: cannot resolve "system-config-printer>=1.1.7-3", a dependency of "kdeutils-printer-applet"
:: the following package(s) cannot be upgraded due to unresolvable dependencies:
kdeadmin-system-config-printer-kde kdeutils-printer-applet
Do you want to skip the above packages(s) for this upgrade? [Y,n]
I try different mirror and again same warning, is it safe to skip this package?
Last edited by archiebald (2009-09-06 10:27:35)

flamelab wrote:
It's been fixed.Wait for your miror to sync.
I use these:
Server = http://mir.archlinux.fr/$repo/os/x86_64
Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/x86_64
Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.otenet.gr/pub/linux/archlinux/$repo/os/x86_64
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/x86_64
Server = http://archlinux.freeside.ru/$repo/os/x86_64
I also use some of this mirrors (mir...)
Thank you for information, I thought that it's something like that.

Gnome: Trouble with system-config-printer

Hello all
I have trouble setting up my printers using system-config-printer in Gnome... I added some screenshots to the bottom of this post. When I try to add the Generic CUPS-PDF printer, the "Next" button is disabled and I am not allowed to continue. When I try to add the HP printer that is on my home network (as recognised by the config) the application throws some sort of runtime error (in terminal) and doesn't update the screen or allow me to continue.
Before moving to Arch a few weeks ago, I used Ubuntu 8.04, and it had a very different application for configuring printers (although it was also called system-config-printer). Preferably, I'd just get that application back for configuring printers, it was much more intuitive and above all it actually worked.
I would like to know how to solve my problem of not being able to add the printers I want and how to get the Ubuntu printer config on Arch if that is possible at all.
Thanks
error:
Traceback (most recent call last):
File "/usr/share/system-config-printer/system-config-printer.py", line 5585, in on_tvNPDevices_cursor_changed
physicaldevice.add_device (dev)
File "/usr/share/system-config-printer/PhysicalDevice.py", line 61, in add_device
raise RuntimeError
RuntimeError

@IceHand
Hmm.. It doesn't really make sense to me that I need a webbrowser to configure a printer, but I gave it a try. When I tried adding the CUPS-PDF printer, it asked me what brand it was in the second step. This can't be right. When I tried adding the HP printer that is on my network, it automatically selected the correct driver from a list, but when I chose to continue it asked me for a username and a password, and providing my own did not work. So this method failed for both printers. I would really love to get back the old configuration menu from Ubuntu at this point.
@dbb
The GTK theme is a personal modification of Fresh Dark that removes the Aurora style scrollbar, uses bigger icons and has nicer progress bars.
The font I use is Myriad Pro with slight hinting enabled.
The icon theme is my own mash-up of many tango-styled themes and a few custom icons and improved icons from other themes. You'll find icons there from gnome-colors, gnome-icon-theme, ubuntu-studio, and stuff found randomly on the internet and more. I'm not done perfectioning the theme though, but it's come a long way.

[SOLVED] system-config-printer won't update or install

After unsucessful update, i uninstalled system-config-printer and tried to reinstall but i get this message:
sudo pacman -S system-config-printer
resolving dependencies...
looking for inter-conflicts...
Packages (4): python2-gobject-3.12.1-1 python2-pycups-1.9.66-2
python2-pycurl-7.19.3.1-2 system-config-printer-1.4.4-1
Total Installed Size: 8.99 MiB
:: Proceed with installation? [Y/n] y
(4/4) checking keys in keyring [######################] 100%
(4/4) checking package integrity [######################] 100%
(4/4) loading package files [######################] 100%
(4/4) checking for file conflicts [######################] 100%
error: failed to commit transaction (conflicting files)
system-config-printer: /usr/share/system-config-printer/debug.pyc exists in filesystem
Errors occurred, no packages were upgraded.
Is there something wrong on my system, or this is a packaging error that will be fixed quickly?
Last edited by max kaspar (2014-04-18 23:11:52)

max kaspar, please edit your post - the bright yellow is hard on the eyes.
When posting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.
*.pyc files can cause a conflict like that, usually you can remove them, as they don't belong to any package.

System-config-printer-gnome utility freezes when "adding" printer.

I've just started adding my wireless printer to my desktop, and while reading about CUPS in the archwiki, I discovered "system-config-printer-gnome". I installed it with pacman, and then set it up like the wiki said. Now when I run system-config-printer and press "Add", I get this error output in my terminal:
[mike@mike-desktop ~]$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/asyncipp.py", line 196, in send_reply
handler (self._conn, result)
File "/usr/share/system-config-printer/asyncpk1.py", line 143, in _ipp_reply_handler
self._client_reply_handler (self._conn, *args)
File "/usr/share/system-config-printer/asyncconn.py", line 142, in <lambda>
kwds["reply_handler"] = lambda c, r: reply_handler (self, r)
File "/usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.py", line 575, in _reply_handler
self._client_reply_handler (connection, devices)
File "/usr/share/system-config-printer/system-config-printer.py", line 4820, in <lambda>
current_uri))
File "/usr/share/system-config-printer/system-config-printer.py", line 4858, in local_devices_reply
self.add_devices (result, current_uri)
File "/usr/share/system-config-printer/system-config-printer.py", line 5198, in add_devices
physdev = model.get_value (iter, 1)
TypeError: iter must be a GtkTreeIter
Does anyone know what could be wrong? I've done some Googling, but couldn't find anything related to this. I also couldn't find anything related to setting up a wireless printer manually with CUPS, so this way seemed the easiest way of adding a printer. Thanks
P.S. I am using GNOME, and all my packages are up to date.

skunktrader wrote:Did you try pointing your browser at http://localhost:631/admin and attempt to add your printer from there?
Oh wow. That worked perfectly! I guess when I saw that in the wiki I assumed that it was for USB or parallel port printers since I saw "localhost". Sorry to waste thread space!
Thanks so much guys!
P.S. I feel like such a noob

Can Firefox be set to use the system default printer?

I would really like it of Firefox would use the system default printer set in the control panel, similar to the way office programs do. Is there no setting in about:config to do this? Or an add-on perhaps?

I really, really wish Firefox would change this, but I did find one thing.
In about:config I set:
print.print_printer to null
print.save_print_settings to false
Now it seems to use the system default. And it doesn't remember any changes with in a session, or from one session to the next. It always uses the system default printer.
I realize different people have different preferences. But on my system the default printer changes automatically depending on what wireless network I'm on at the moment. I wanted Firefox to reflect that.

Strange System.out.print behavior inside a for loop

I'm trying to create a simple ASCII progress bar in the console that would display like this:
|--------------------------------------------|
============================More equal signs would appear as time goes on. At least this is what I want to happen.
Instead, what happens is, none of the equal signs are printed until the very end, after the for loop in which the System.out.print("=") statement is in, has exited.
This is my code (probably more than necessary is shown, but the important part is the for loop):
    public void addSomeDiffys(int numOfDiffys, int minInt, int maxInt) {
        Diffy currentDiffy;
        System.out.println("\nCreating Diffys.");
        System.out.println("|--------------------------------------------|");
        for (int i=0; i < numOfDiffys; i++) {
            currentDiffy = new Diffy(minInt, maxInt);
            if ((i/(double)numOfDiffys)*100 % 2 == 0)
                System.out.print("=");
            diffyList.add(currentDiffy);
        System.out.println("\n" + diffyList.size() + " Diffys created.\n");
        System.out.println("Sorting according to highest rating...");
        Collections.sort(diffyList,Diffy.HIGHEST_RATING_ORDER);
        System.out.println("Done.\n");
    }I also tried changing the System.out.print("="); to System.out.println("="); This time it works as expected, its just not very pretty...
I get something like this:
|--------------------------------------------|
=
=
=
=
=
=
=
=
=
=
=
=So again, when I use println, rather than print, the equal signs are printed over time, slowly, as the progress increases. When using print, Nothing happens for a long time, and then suddenly they all appear after the for loop has terminated, which makes no sense.
Thanks for any help.

When using print, Nothing happens
for a long time, and then suddenly they all appear
after the for loop has terminated, which makes no
sense.
Yes it does make sense! The characters are buffered inside the PrintStream and written when there is a full line to write. You could try a flush() after each = is written but I have no confidence that it will make any difference.

Problem with national characters calling System.out.print(...)

I need to develop an application printing spanish characters like "�" (ce trencada) "�", "�", etc.
The problem is when I type
System.out.print("�")in my application, I get "plus-minus" symbol while executing it.
Anyone can help me, please?
Thank you in advance.

check the list of fonts available. You can use the following code for the purpose.
public static void main(String args[])
        String fonts[] = getFontNames();
        for(int i = 0; i < fonts.length; i++)
            System.out.println(fonts);
public static String[] getFontNames()
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
return ge.getAvailableFontFamilyNames();

Bad system config info

Hello,
OS WIN 8.1
HP Pavillion
I got this message Bad system config info on a blue screen. I can't boot up the OS, even tried safe mode and nothing works. Tried Refresh and nothing.
I need to access my documents and using HP recovery manager with flash usb stick, trying to copy the documents i need to save, but at times it tells me No USb is connected.
There is a problem I just can't get, I tried so many things, Extensive Stress test, passed. Chkdsk /r, no problem. It tells me the computer is locked, or Antivirus is running....Can anyone pls help/
\TKS
Desperate to fix this

When trying to back up files I assume you aren't attempting backing up to same flash drive that contains HP Recovery?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HT1365 system config chuck

I had trouble connecting to the internet. I made an appointment with apple store, took my imac in. they ran diagnostic and found no problems. but reformatted the disk for me using time machine. i brought it home and it worked. then when i put the mac to sleep and came backto using it, the internet was gone. so i called apple store and they said try deleting the system configuration folder under library - preferences - system config. i did that. then restarted and the internet worked. now i have to do this all the time to connect.
what should i do? please help.

Hello Hackintosh.
Basically i have connection problems. every time i put the imac to sleep or shut it down, when i start it back up, the web browser says, you are not connected to the internet, please connect to the network. the air port icon at the top shows full strength. but the browser says its not connected to the internet.
when i click on network diagnostic from with in the brower, it shows the ethernet is connected and the wifi has an ip address.
then i have to close everything, go into library > preferences > and delete the system configuration folder and restart. when i restart the airport icon is light gray. its not connected. i click and hover over the airport sign and it picks up my wifi connection. i give it a min before opening the browser.
when i open the browser, i have the same error message. you are not connected to the internet. then there is the network diagnostic button below the error message.
sometimes i have to restart multiple times (around 3-4) and again go back into the preferences folder and delete the system configuration folder. some times it doesnt work how many times i do this.
everything was working fine till i removed the ethernet connection to clean the desk. then all **** broke loose. this is getting annoying.
i booked an appointment with the apple store and they ran diagnostics and everything came back negative. it picked up the wifi in the store right away and they could browse. they connected an ethernet cable and it worked. they booted it up from the network menu for this.
then they booted my computer the normal way and they ran into the same problem. so they reformatted my hard disk and reintstalled OS X Lion.
now i have OS X Mountain Lion and i still have the same problems. cant be virus because when the hard disk was wiped clean, it would have wiped the virus out too......at least i think it would have.
could you help? i have extended warranty from best buy on this mac so i will take it to them to have a look aswell. but i want to see if i can fix this myself. dont feel like lugging this thing around everywhere.
hope to hear from you soon.

System-config-display, gnome-display-properties - inconsistent R5 U5 64bit

Hi all,
I have OEL Rel 5 U5 (64-bit) installed and running on an IBM x3200 which has Radeon integrated graphics, with a IBM ThinkVision LCD monitor (1280x1024 max)
Problem I have is eventhough system-config-display lets me select 1280x1024 I can't actually get it to switch. Upon log-off/log-in, reboot, restart, etc... it still returns to 1024x768 mode.
Running gnome-display-properties only gives me a choice of 1024x768, 800x600, or 640x480.
I've also tried xrandr and trying to force it to 1280x1024 but it tells me I only have the 3 choices given by gnome-display-properties.
My xorg.conf file is configured with 1280x1024, 1024x768, and 800x600 modes, so I'm baffled at where gnome-display-properties and xrandr are getting their mode choices...
Can anyone shed some light on this?

Based on Xorg log I'm guessing the monitor driver just will not support the higher res and apparently that's where 'gnome-display-properties' gets its info regardless of what I try in Xorg.conf.
I'll see if I can manipulate the monitor settings and see where that gets me...
I see the following in the log:
(II) RADEON(0): Monitor1 EDID data ---------------------------
(II) RADEON(0): Manufacturer: IBM Model: 29a Serial#: 16843009
(II) RADEON(0): Year: 2003 Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 30 vert.: 23
(II) RADEON(0): Gamma: 1.00
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz Image Size: 300 x 225 mm
(II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Serial No: Reserved
(II) RADEON(0): Monitor name: IBM RSA2
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): DFP table revision: 3
(II) RADEON(0): Panel infos found from DDC detailed: 1024x768
(II) RADEON(0): Valid Mode from Detailed timing table: 1024x768
(II) RADEON(0): Valid Mode from standard timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Total of 12 mode(s) found.
Here's video info from lspci:
0a:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])
     Subsystem: IBM Unknown device 0325
     Flags: bus master, stepping, fast Back2Back, medium devsel, latency 66, IRQ 11
     Memory at d8000000 (32-bit, prefetchable) [size=128M]
     I/O ports at 6000 [size=256]
     Memory at d0800000 (32-bit, non-prefetchable) [size=64K]
     [virtual] Expansion ROM at d0820000 [disabled] [size=128K]
     Capabilities: [50] Power Management version 2
Xorg.conf:
# Xorg configuration created by system-config-display
Section "ServerLayout"
     Identifier "single head configuration"
     Screen 0 "Screen0" 0 0
     InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
     Identifier "Keyboard0"
     Driver "kbd"
     Option     "XkbModel" "pc105"
     Option     "XkbLayout" "us"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
     Identifier "Monitor0"
     ModelName "LCD Panel 1280x1024"
### Comment all HorizSync and VertSync values to use DDC:
     HorizSync 31.5 - 64.0
     VertRefresh 56.0 - 65.0
     Option     "dpms"
EndSection
Section "Device"
     Identifier "Videocard0"
     Driver "radeon"
     Option     "AccelMethod" "UXA"
EndSection
Section "Screen"
     Identifier "Screen0"
     Device "Videocard0"
     Monitor "Monitor0"
     DefaultDepth 16
     SubSection "Display"
          Viewport 0 0
          Depth 24
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
     SubSection "Display"
          Viewport 0 0
          Depth 16
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
EndSection

How to view System.out.print() messages for adapters in OIM 9.0.3

I have created an adaptor for OIM from a java jar file. When that adaptor executes after some updates on tables it produces some execptions/error.
I can not see the details of these exceptions as I do not know where is the standard output located when adapter is executed via OIM.
Where cen I see output from my code lines that contain: System.out.println()?
thanks

I am not sure if logging is enabled as OIM was installed previously by another person - how can I check if it is enabled and how to use log4j in this case?
OIM Design Console window shows no messages comming from my System.out.print() statements.
/br
Djeno

J2me sdk 3.0 problems in System.out.print

Hi
I can not use println to print Chinese .
First I just use System.out.print("test") to print some debug information , and I surprised to find it print nothing.
Then I try System.out.println("test") and it worked well. But there still problem when print Chinese,
like System.out.println("测试") and it just print a mistake string as "??" !
Can some tell me how to solved it, thanks .

Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.

HOW TO system.out.PRINT a curly brace: {

How is it possible to print a { with command: system.out.print{ "text { text"}; ?
Thanks

How is it possible to print a { with command:
system.out.print{ "text { text"}; ?
ThanksYour command has 2 errors in it.
1) "system" must start with a capital "S"
2) You used curly brackets where you should have used parentheses
This works: System.out.print( "text { text");
(although I suspect that you really want to use println, not print)

System-config-printer

Similar Messages

Maybe you are looking for