System connection error

Hi,
I am using Portal nw2004s and this portal system have ABAP+Java Stacks.I developed web Dynpro Abap application on abap stack. In order to run this abap application from java stack I confiugered a connection from Java to Abap with saplogon ticket method. But this connection does not work. I get an error message in dev_jrfc.trc.This error message is "Issuer of SSO ticket is not authorized".What's the problem.

Hi,
Did you add to the login/create_sso2_ticket & login/accept_sso2_ticket to the profile, make sure you did STRUSTSSO2 and re-import the ticket.
Jean

Similar Messages

Source system connection error

Dear BW Experts,
Now, i am in a critical situation,that the source system giving error in the quality system.So unable to extract data for testing.we have tried a lot getting any solution.
But now planning to connect the sand box system to the bw quality system.
The confusion is that if the sand box is connected to the bw quality system,then can i use all the developed objects(infocubes,ds objects,multi providers etc) which i had created before or design and activate all the objects again for the new source system.
If any body attended this type of issues earlier,please suggest me how to proceed....
Thanks & Regardas
Debasish

Hi,
u can connect ur bw quality system to ur sand box.
but u have to reimport all requests from Bw development to bw qualty.
Imp. u have to delete Source conversion routine before importing request.
Steps will be same like
1. replicate data source.....
2.....
etc..
/Sachinkumar.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Connection Error with iPod mini to Bose Home Theater System

When connecting my iPod mini to my Bose Home Theater system, it recognizes that iPod has been connected, but after the "Acquiring Signal" process, it gives me an "iPod connection error. Please re-insert iPod into docking station." I tried several times, but the result is the same.
My iPod mini has been updated with the latest software, and I did a system restore to return everything to factory defaults, but still no luck.
Any suggestions.

Hi. What you need to do is Launch DVD Player. Go to Preferences. Select Disc Setup tab. In Audio Output under Audio in the second part of the menu, select Digital Out-Built-in-Output. Then click OK. See if this works, 'cause mine does.

Database Connection error in Crystal Reports using SAP BW system

Hi,
While using Crystal Reports in trying to build a report on the SAP Query in SAP/BW System using the MDX driver, I am able to get the structure of the query fields into the report but on the other hand while trying to refresh the report for data I am getting the error message u201C Failed to connect to the databaseu201D . This database connection error occurs despite the fact that the SAP server authentication details being entered on Refreshing the report is correct.
What could be the possible reason? Any guess...
Thanks,
Amogh

Hi,
Yes, I am using the MDX driver.
Is there any pre-requisites of importing certain ABAP transports into SAP Server since I haven't done any? Please recommend.
Thanks,
Amogh

Document Management System (CSADMIN) gives connect error?

Hi everyone
I have configured DMS in my system which is on ECC6 and HP-UX (Tcode OAC0).
When I try to connect using CSADMIN it gives the following error....
This configuration is for HTTP server:
I have given port as 1090 and HTTP Script as ContentServer/ContentServer.dll. Is this correct??
Connect Error: NiHostToAddr
<ip-address> error:
NIEHOST_UNKNOWN
What can be the problem?
Regards
Chin2

So you did not yet install the content server on your Windows system? If not, then it won't work
http://service.sap.com/instguides
--> SAP Components
--> SAP Content Server
There you will find the installation guides. In those you will find which CDs you will need to download.
Markus

JCO connection error:Couldn't create JCOClientConnection for logical System

Hi All,
We are facing a production outage issue.
We have a Federated Portal Network setup where one of our producer goes down automatically (seems on heavy load).
On this Producer server we have 3 Web Dynpro applications deployed and default trace is full with JCO connection error   saying Could   not create JCOClientConnection for logical System: CSVMR_WD_MODELDATA_DEST.
We had issue with max allowed JCO connections so we changed the below mentioned parameters for JCO connection settings in portal:
u2022     Minimum value of JCo Pool Size in total = 80
u2022     Minimum value for CPIC_MAX_CONV per SAP Web AS = 320
u2022     Maximum Number JCo Connections = 160
Please let us know if we are missing on some settings, any help in this regard is appreciated.
Regards,
Priyanka

Hi,
As you have already increased the maximum number of connections/pool size but still you are facing this problem. I would suggest you to check the web dynpro application which might not be able to release/disconnect the JCO connection.
Please check this [Thread|How to close a model object connection for Adaptive RFC?; for more details.
Regards
Puneet

Error in system connection

Hi,
I created a system in EP for publishing some RFC- based reports in EP without writing code. I given all detail for my R/3 system .I mapped my user id and password in EP and R/3.But i testing the system connection like System name-open-connection test i am getting error like this;
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Could not retrieve default alias. Make sure the system object has at least one alias.
How to resolve this error to stabilesu2019 the connection.
Thanks,
Kundan

Hi kundan,
Once we have created a system at Portal , we provide the Properties like ITS and WAS.
These are Object properties of teh system which we create.
There will be a drop down where we can choose system properties as 'object','system alias, 'permissions' and 'Connection test'. Now at these we need to choose " system alias".
Here we provide a system alias and 'add as default'.
Now we are done with defining the default alias.
Hope this was helpful to you.
Regards,
srikanth

Error: No Phone System Connection

Greetings,
I am integrating RCC with Lync 2013 and I am getting this
Notification: No Phone System Connection. I have notices that when I capture packets transferred between Front End Server and CUPS server, there are no packets being sent to CUPS server.
I have completed below steps:
1) I have enabled integration with my phone integration option in Lync client
2) Added Static route to the CUPS server on port 5060.
3) Added CUPS as a trusted application in the application pool.
4) Published the new topology and restarted the Front End Services.
Remote Call Control URI is set to: sip:[email protected]
Phone URI is set to XXXX;phone-context=dialstring
I would really appreciate if you can guide me.
Thank you
Chirag
Chirag Shah

Hi,
Did the Lync account contains an apostrophe? If so, it may influence for the users with an apostrophe (') in their Lync sign-in ID. In order to resolve the issue, remove the apostrophe from the Lync sign-in ID. Also you can change to use another Lync account
to have a test.
You can refer to the part of “Unable to get Softphone control” in the link below:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html#controlerror
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

RFC connection error between Netweaver 7 EHP1 and Ides ECC6

Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. Jimbob

Hi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

RFC connection error (VPN-access)

Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
Thom

Hi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!!

RFC connection error when registering PROGRAM ID.

Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.

Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 -> Done2. Create new destination of type T (TCP/IP) -> Done
3. Make sure you select Registered Server Program option before writing your program ID -> Done
4. Write you program ID (remember it's case-sensitive) -> gave the SID name
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) -> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out.

RFC Connection Error during Web AS ABAP Database Instance

I keep getting RFC Connection error installing the database instance. The following are the pertinent logs:
INFO 2007-05-09 20:10:04
Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
INFO 2007-05-09 20:10:04
Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
INFO 2007-05-09 20:10:22
Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
INFO 2007-05-09 20:12:23
RFC parameter CLIENT set to value 000.
INFO 2007-05-09 20:12:23
RFC parameter USER set to value DDIC.
INFO 2007-05-09 20:12:23
RFC parameter LCHECK set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter PCS set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter LANG set to value EN.
INFO 2007-05-09 20:12:23
RFC parameter ASHOST set to value cix22.
INFO 2007-05-09 20:12:23
RFC parameter SYSNR set to value 00.
INFO 2007-05-09 20:12:23
RFC connection information checked successfully.
ERROR 2007-05-09 20:12:24
FRF-00007 Unable to open RFC connection.
I tried the following fixes spread across different threads in this Expert Forums:
1. Someone said network problem. I rebooted, restarted the install and even redo it.
2. Another suggestion was to use caps on the password. Didnt work.
3. One suggestion was to update the keydb.xml file. However, I could find such property name:
search for the table t_SAPComponent_SAPSystemLogon_SHARED
then look for <fld name="pPW">, <properties>,
<property name ="GUIENG_USER_INPUT" and set the value
"GUINEG_TRUE" to "GUIENG_FALSE".
4. I even used the ddic password 19920706 which is supposed to be the default.
5. Restarted the instance and applied all the fixes above.
Does anyone know what is going on base on the logs above? Thanks.

try moving all your install disk onto local file system then rerun the install. That might work....

System connection error

Similar Messages

Maybe you are looking for