System constantly locks-up
My system is:
Athlon 64 3200+ with 1mb cache
MSI K8N Neo Platinum
2*512mb Geil Platinum Pc4000
Enermax 550w PSU
Radeon 9800 Pro
I cannot seem to stop it locking up and just freezing completely, it does this at least once an hour, I have tried mving the memory slots (using 1&2 or 1&3, 2&3 wont post), I have lowered the HTT value to 3, I have relaxed the timings on the ram, ive tried upping the ram and cpu voltage, I've tried different bios releases (12b5, 1.2, 1.3b), and ive even dropped the ram to 166fsb while run the cpu at default. But whatever I do, I cannot get it to not lock-up. It constantly fails memtesr etc and other cpu and memory stability programs. I know the ram is good for a lot more, but I dont know what the problem is as ive seen other people using the same ram with no problems. Does anyone have any ideas's?
Hi,
Do you have the D.O.T. enabled? I was have the same problem with the 9600 XT Radeon card and SATA RAID. I disabled it and my systems run great!
Similar Messages
-
my txt message app constantly locks up requiring me to reboot the phone. Is there a solution for this ?
That's quite odd Rob8, but we can definitely get to the bottom of this. When did it start? Do you delete heavy and older threads? Please go to Settings>General>About. What is capacity? What's available?
AdaS_VZW
Follow us on Twitter at @VZWSupport -
In my company I am creating project, with reference to WBS / Activity we are creatin Purchase order. We want a temporary status in project by virtue of which we can avoid any further PO against the particular project. How to achieve this ?
I tried to do this with lock status in PS but although I set up Lock for Header level WBS still I can make PO against the project.
Wht is significance of system stastus lock ?
Pl suggest.
RegdsYou can either use user status for controlling this, I've mentioned about how this needs to be done is previous post, link below:
Re: Project Purchase order
Else you can set Lock Account Assignment for the WBS, this will stop PO creation against the WBS.
Regards
Sreenivas
Pls close the post if satisfied -
Error whiel activating cross system object lock
Hi ,
when I am trying to activate the cross system object lock functionality for developement system in tcode /TMWFLOW/CMSCONF from our solman system , it showing the following error
'Error RFC destination SM_SMDCLNT000_TRUSTED: You are not authorized to logon to the target system (error code 1).
Message no. /TMWFLOW/TRACK_N106'
In the above RFC connection the 'Current user' is provided.
Can anyone please let me know what I am missing in this?Hi Farzan,
I dont have autorization in Client 000 of SMD system thats why its giving authorization error but when I am trying to activate the object locking for SMD client 321 why the system is trying to logging into the SMD : 000 can we somewhere modify the RFC conection which needs to be used.
Regards,
Amar Kamat -
Cross system object lock -how to build up lock entries for existing request
Hello,
we implemented ChaRM for some years and intend to activate cross system object lock (CSOL), now.
But there are a lot of existing transport requests, which have not been imported to productive system, yet.
It would be very helpful to create lock entries for objects, which are assigned to those transport requests.
Does anyone know any standard report for this purpose?
Thanks a lot for any hint.
Best regards
HorstIf anyone else needs that feature:
Report TMW_TRKORR_LOCK_UPDATE (executed in satellite system) will lock the objects of a transport request in solution manager system. -
*** System Prefs Locking Up ***
Anybody having problems with System Prefs locking up when left open for a while? I have to force quit it.
Am running 10.4.10
Mac Pro 2.66Ghz
Mac Pro Mac OS X (10.4.10)I know this sound general, but did you repair your permissions? Create a different user account, and see if it still does it. It probably won't.
-
My system perically locks up with the color ball spinning. I manually have to turn it off and back on to unlock it. I have use the Mackeeper to clean out junk fuile whuich most of the time is none but the problem continues.
cmdrgordonRe: Changing desktop pictures locks system preferences. Info: MacBook Pro, Mac OS X (10.7.3) This is very similar to my issue:
When I select System Preferences from the Apple System Preferences menu, both laptop and extended monitor screens immediately jump to the Change background/screen windows and locks me there with the spinning beach ball, while the text on the Change screens reads, "Loading ....". Then I have to move to Activity Monitor and Force Quit System Preferences which indicates in parens "System Preferences no longer responding."
I have tried LInc's solution re finding both plist files: Caches/com.apple.systempreferences which I cannot find;
I have found and moved the following item to the Desktop:
Preferences/com.apple.desktop.plist
Retesting by launching System Preferences again produced the same results. I then replace the Desktop's plist file where it came from.
BTW: The standard Utility Disk checks indicate no errors.
I'm stuck. Any more ideas?
Thanks. -
Hi,
I'd like to set a system wide lock timeout to 10 secs, i est I want that if a transaction waits for a row more than 10 seconds, the Oracle forces a ROLLBACK!
Looking in the documentation I found the trigger:
CREATE OR REPLACE TRIGGER resumable_default_timeout AFTER SUSPEND ON DATABASE BEGIN DBMS_RESUMABLE.SET_TIMEOUT(10); END;
... but it seems not to work.
Is there any system wide parameter, or another trigger, or I missed something with the above trigger (I shutdown any session to test)!
thank you
G.Steve,
your answer is complete, the problem I am facing is that:
1 - I should instruct my programmers of the usabily of this tecnique the SELECT ... FOR UPDATE WAIT n, so the timeout is faced from application perspective, and it isn't so bad, in fact every single query could be customized regarding the WAIT time!
The drawback is that if the programmer doesn't use this technique, the application waits for the eternity.
2 - A system wide lock timeout, in any case could force, in any case, a default behaviour, ...
3 - If you are doing a porting from a different RDBMS see DB2, that implements a db lock timeout, you should recode all the SQL, and the porting needs more review and testing of the application!
Thank you
very much
G. -
Hello all. For entering in Oracle 10g Db we start SQLPLUS. user-name "system" and
password containing @ (my mistake), TNS error view. Presently I know that problem
in "@" symbol. While understood the user "system" is locked....
As possible change password and unlock the user?
Or create the the new user for Oracle....
Please advise ....ups,
I forgot that part, we are giving the answer in small pieces
Resume for "dummies"
1) Connect to the database
sqlplus "/ as sysdba"
2) Unlock the user ( as William Fee post )
ALTER USER xxxxx ACCOUNT UNLOCK;
3) Change the password ( as my post )
Alter user system identified by <newpassword>
4) a bit optional ( IMHO ) change the profile ( as William Fee post )
ALTER PROFILE DEFAULT LIMIT FAILED_LOGIN_ATTEMPTS UNLIMITED; -
Charm without Cross system object lock
Dear All,
We have requirement for configuration of Charm without cross system object lock i.e. solution manager will be used for documentation but create, release, import request from the development system itself.
Can we make changes in the functionality and use charm for documentation only?
if anyone has the same requirement can you please let me know steps to be followed.
Thanks in advance
Regards
SushantDear Prabhakar,
Thanks for the reply.
Our project has just gone live and issues immediate resolution is being carried. Charm will integrate with system and training is required for that which at this point of time not possible but at the same time without affecting the issue resolution we want to log the changes in solution manager.
We will use the CSOL feature may be some time later.
At present i have not activate CSOL, still the document doesn't flow through. Document got stuck at "In development" phase and doesn't move forward. It doesn't allow to change the status.
Regards
Sushant -
Ta OC41 - in PRD modification allowed even though the system is locked
Hello SAP gurus,
I stumbled upon a strange behaviour in our test and productive system.
In the test system transaction OC41 (Change View "Currency Exchange Rates": Overview) shows a popup window saying client xxx has status not modifiable.
So the unlocking with scc4 or se06 poped up in my head.
However when I looked up this example in our productive system, I've found out that I have the possibility for the exchange rates edit even though the system is locked!
Test system is set like this:
SCC4:
Client role: Test
No Change Allowed
No Changes to Repository and cross-client Customizing objs
Protection level 0: No restriction
eCATT and CATT Only Allowed for 'Trusted RFC'
No restrictions set
SE06
Global Setting: Modifiable
Productive system is set like this:
SCC4:
Client role: Productive
No Change Allowed
No Changes to Repository and cross-client Customizing objs
Protection level 0: No restriction
eCATT and CATT Not Allowed
No restrictions set
SE06
Global Setting: Not Modifiable
So how come I can change the exchange rates in productive system and not on the test system?
Thanks for help in advance.
Regards
- StefanHi Venkata,
Congratulations for your first (and well earned) points!
Really if you change the client as productive in scc4, you can also then change the currency rates in oc41.
To all above, thanks for telling me to keep on searching, I've found some info and e.g. a note 356483, that might help me in the future. -
Cross System Object Lock with ChaRM Retrofit
Hi-
I need to know if there is the ability to have a cross system object lock while utiliziing Retrofit within ChaRM. For example I am working with an N, N1 landscape. When I release a transport request in N I need the object to be locked in the N, and N1 (after retrofit) landscapes.
Will this be supported with both Workbench and Customizing requests?I dont believe this is possible at the moment. As you must be already aware, that SAP releases the locks from the objects as soon as the transport request is released from the Development System. Unless, this locking mechanism is extended to various systems first (DEV and QAS) and later to parallel landscapes (eg:- Project landscapes) it would be difficult to bring in this feature.
Rgds,
Abhijeet Bhagat -
We have implemented Charm in Solman 7.0 Ehp1. I have activated 'cross system object lock' both globally (report tmwflow/config_services) and in satellite System (tcode- /n/tmwflow/cmsconf). am able to change the same table again which i had edited earlier and stored in TR.
am i missing somewhere.
ThanksHello Powai,
Please, check the link below, there you can find good informations about CSOL.
/people/rajiv.jha/blog/2010/08/30/csol-managing-parallel-projects
Best Regards,
Diego Fischer -
ChaRM:Cross system object lock:Ovelapping
Hi Friends,
In SE38, while activating the service "/TMWFLOW/CONFIG_SERVICES", i am seeing following conflict scenarios:
Cross-Project, Client Specifi, Ovelapping
Cross-Project, Client Specifi, Partial Ovelapping
What is the meaning of overlapping? In which scenario it can be used?
Thnaks for your input
PSKHi
There is a feature call cross object locking in solman it is used for that
you can check below note for all the available modes
Note 981729 - Cross-system object lock: Alternative lock modes
Hope it solved ur basic doubt
Regards
Prakhar -
ChaRM cross system object lock
Anyone have any experience with the cross system object lock in ChaRM? If so, can I get your thoughts on how well it works and your likes/dislikes?
I read the help.sap.com page. I'm looking fto hear about people's experiences.
regards,
Jasonbump.
Maybe you are looking for
-
Expand Size of Second Partition - OS X Lion
Resurrecting for Lion the partition resizing problem, previously discussed on archived Leopard posts. When you have created two partitions in an os / x journaled volume for data storage and backups. You want to shrink partition #1 and give the freed
-
How to configure webutil 1.06 with oracle Developer suite 10g R2
Hello everyone, My computer configuration is OS-> Windows 7 Ultimate (32-bit) RAM-> 1GB I have successfully installed oracle XE and developer suite 10g R2 in my computer. Now i want to configure webutil. Please give me the step-by-step procedure for
-
Error accessing Business Rules from EAS
Hi, I am using EPM System 11 and trying to access Business Rules via Essbase Adminstration Services Console (EAS). When I open up the Business Rules node from Enterprise View, and select Repository View > Rules, a list of all the Business Rules is di
-
Shipping point in PO stock transport order
When I create PO (stock transport) I need to change shipping point every time? Can you pls tell me where I can find it and set it in SPRO? regards Piotr
-
How do I reset the download on my iTunes when I have lots showing that they are downloading but nothing is happening.