System Control msg "Get Configuration port has problems

Hello !
1) Do you know what the System control manager is doing and where I can find some information about the program?
2) Do you know what the message " Get confirmation port has problems" means that comes up every time I start the computor since I installed the System control manager ?
Best regards Namretto

Comments:                      My system/Namretto
>>
    Model:                         AMD Athlon(tm) XP 3200+
    Speed:                         2.19GHz
    Model Number:                  3200 (estimated)
    Performance Rating:            PR3177 (estimated)
    Type:                          Standard
    L2 On-board Cache:             512kB ECC Synchronous Write-Back (16-way, 64
                                   byte line size)
    Bus(es):                       ISA AGP PCI USB i2c/SMBus
    MP Support:                    No
    MP APIC:                       No
    System BIOS:                   Phoenix Technologies, LTD 6.00 PG
    Mainboard:                     MICRO-STAR INTERNATIONAL CO., LTD MS-6570
    Total Memory:                  511MB DDR-SDRAM
    Model:                         Nvidia Corp nForce2 AGP Controller
    Front Side Bus Speed:          2x 199MHz (398MHz data rate)
    Total Memory:                  512MB DDR-SDRAM
    Memory Bus Speed:              2x 199MHz (398MHz data rate)
    Monitor/Panel:                 Dell 1501FP (analog)
    Adapter:                       RADEON 9600 SERIES  
    Adapter:                       RADEON 9600 SERIES - Secondary  
    Removable Drive:               Diskettenhet
    Hard Disk:                     ST312002 6AS SCSI Disk Device
    CD-ROM/DVD:                    Memorex 40MAXX 1248AJ
    CD-ROM/DVD:                    _NEC DVD_RW ND-2500A
    1.44MB 3.5" (A:):              N/A
    Hard Disk (C:):                29.3GB (19.2GB, 65% Free) (NTFS)
    Hard Disk (D:):                82.5GB (71.3GB, 86% Free) (NTFS)
    CD-ROM/DVD (E:):               N/A
    CD-ROM/DVD (F:):               N/A
    Serial/Parallel Port(s):       2 COM / 1 LPT
    USB Controller/Hub:            Standard OpenHCD USB Host Controller
    USB Controller/Hub:            Standard OpenHCD USB Host Controller
    USB Controller/Hub:            Standard Enhanced PCI to USB Host Controller
    USB Controller/Hub:            USB-rotnav (hub)
    USB Controller/Hub:            USB-rotnav (hub)
    USB Controller/Hub:            USB-rotnav (hub)
    Keyboard:                      Standard 101/102-Key or Microsoft Natural PS/
                                   2 Keyboard
    Mouse:                         HID-compliant Cordless Mouse
    Human Interface:               Logitech Cordless USB Mouse
    Device:                        NVIDIA(R) nForce(TM) Audio Codec Interface
    Model:                         HP DeskJet 670C
    Model:                         \\HEMPC\SKRIVARE 6
    Model:                         \\HEMPC\SKRIVARE 3
    Model:                         \\HEMPC\SKRIVARE
    Model:                         \\HEMPC\PRINTER
    AC Line Status:                On-Line
    Windows System:                Microsoft Windows XP/2002 Home (Win32 x86)
                                   5.01.2600 (Service Pack 1)
    Adapter:                       NVIDIA nForce MCP Networking Controller
    Adapter:                       Realtek RTL8139/810x Family Fast Ethernet NIC

Similar Messages

  • ThinkPad USB 3.0 dock network port has problems with our Cisco 6509 switch

    We purchased a ThinkPad USB 3.0 dock for and X1 carbon and the main issue we are having is the network port does not seem to work with our Cisco 6509 switch. I tried updating the firmware on the dock but it still hasn't fixed the issue. I was wondering if anyone else had run into this problem with any other networks out there.

    I'm seeing the same issue with a ThinkPad W520.  When I connect my ethernet cable directly to the laptop, my internet speeds are on par with my service provider of 18 Mbps.  When I move that cable to the dock, I will only see 1.5 Mbps.  I have two displays attached to the dock and I'm running Windows 7.  I've updated the dock firmware and have installed the latest system drivers.  Is there anything else to try?

  • When i get started firefox has problem

    make new account, verify key code and url

    Hi Yustia,
    So I understand your question, when you open Firefox for Android app, you select the support tab and tap Learn the Basics: get started? I that correct? (see screenshot 1)
    Which topic in the list do you select next? (screenshot 2) I am trying to understand where you are seeing the "make new account, verify key code and url" text.
    kestreltowers

  • PT880 and System Control Utility

    I do the Live Update feature with my two MSI boards-----great feature----wish ALL mobo companies had something like it!
    Anyway----yesterday on my PT880 rig----it wanted me to update Live Update to Version 3.60 and now offers me another Utility called "System Control"
    Neither of those are actually on MSI site in the PT880 motherboard download section.
    Anybody know what "System Control" is or does??
    I tried to load it but continued to get errors....
    John

    It shows up as a downloadable utility from within Live Update----when I do Live Monitor-----and it goes up to MSIs site and checks for latest Bios, drivers, and utilities.
    I used to only be able to download eight different utilities, Core Center being one of them---LockBox, iSpeeder, GoodMem, WMI Viewer etc.
    But now, two more are showing up----Playlist Editor and System Control.
    And neither of those two show up in the actual download site for the PT880 Neo on the Taiwan site.  In fact----the Taiwan Site is showing the latest version of Live Update to be 3.58------and a message came across my screen recommending that I update Live Update to ver 3.60----which I did.
    When I download and install System Control----I get a "Port not found" error---and it won't do anything.
    Strange......

  • PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

    PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

    adobeamatuer
    Thanks for the reply.
    Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
    I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
    Please update us on your progress when you get a chance.
    Best wishes
    Thanks.
    ATR
    Add On...spelling correct 12 03 2014.

  • My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

  • GX660 System Control Manager problem(Brightness)

    Hi again 
    I have problem with my MSI GX660. I have Windows 8.1. Unfortunately System Control Managaer doesn't work for me.
    Turbo, Volume and WIFI works, but I can't change brightness. I try change it in Windows 8 options but still doesn't work for me 
    Level on bar is change but on screen nothing happens
    please help me
    I have ATI drivers 14.1
    PS. modes like ECO, Office, Movie etc. also doesn't work

    The fact that MSI has no posted any drivers for the GX660 for Windows 8 or Windows 8.1, it means that it is not supported for updating to Windows 8 or 8.1. In that case, you're pretty much on your own as far as getting the system to work. We can attempt to give you suggestions, but without MSI providing any drivers, most likely SCM won't work.
    The only thing I could suggest trying, might be to grab the SCM from the GX60 (one of the older revisions) for Windows 8 or 8.1 and hope that it works. *NOTE:This is just something I can suggest to try. I by no way take no responsibility for what it might do to your system, nor does MSI*

  • After updating to ios6. I am unable to have voice control in my Fiesta Titanium has this been a problem for anyone else or just my problem?

    After updating to ios6. I am unable to have voice control in my Fiesta Titanium has this been a problem for anyone else or just my problem?

    I am an activist when it comes to rip-offs and I intend to set up a group to pressure the Ausralian government to legislate to make all computer software producers to make all new software compatible with all old software AT NO COST to the user.
    I thought about that myself, but when it comes to Windows XP. It is peculiar that software companies get away with "selling" software that suddenly stops working properly. The problem with XP is of course an environmental one as well. There is a huge number of fully functional PCs that suddenly are no longer supported by Microsoft, and that are not powerful enough to take newer supported MS operating systems. What MS basically recommends people is to throw them away with a horrible cost for our environment.

  • Why i'm getting exception InvalidOperationException: Invoke or BeginInvoke cannot be called on a control until the window handle has been created ?

    I have a backgroundworker1 dowork event and inside:
    private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
    BackgroundWorker bgw = (BackgroundWorker)sender;
    if (bgw.CancellationPending == true)
    return;
    else
    this.BeginInvoke(new MethodInvoker(delegate
    timer1.Stop();
    Button1Code();
    timer1.Start();
    trackBar2.Enabled = false;
    trackBar1.Enabled = false;
    while (true)
    bitmaps = ImagesComparison.get_images_with_clouds(b1);
    for (int i = 0; i < bitmaps.Length; i++)
    ConvertTo1or8Bit.BitmapToGIF(bitmaps[i], @"c:\convertedgifs\" + i.ToString("D6") + ".gif");
    break;
    The exception is on the BeginInvoke part.
    In the last few days i was running the program many times and i didn't have this exception even once.
    And now every times i'm running it i'm getting the exception.
    System.InvalidOperationException was unhandled by user code
    HResult=-2146233079
    Message=Invoke or BeginInvoke cannot be called on a control until the window handle has been created.
    Source=System.Windows.Forms
    StackTrace:
    at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
    at System.Windows.Forms.Control.BeginInvoke(Delegate method, Object[] args)
    at System.Windows.Forms.Control.BeginInvoke(Delegate method)
    at mws.ScanningClouds.backgroundWorker1_DoWork(Object sender, DoWorkEventArgs e) in d:\C-Sharp\Download File\Downloading-File-Project-Version-012\Downloading File\ScanningClouds.cs:line 715
    at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
    at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    InnerException:
    Line 715 is: this.BeginInvoke(new MethodInvoker(delegate

    Where are you starting the background worker from?  Possibly the constructor of the form?
    It would be greatly appreciated if you would mark any helpful entries as helpful and if the entry answers your question, please mark it with the Answer link.

  • I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

    I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • Get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

    get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

    ''mbratlie [[#question-1055011|said]]''
    <blockquote>
    It was working fine and I had no problems, and then one day I tried opening a window and it froze. When I tried quiting the program my whole window went black. The x to the close the window doesn't work. The only option I have in my tool bar is Firefox and nothing happens when I try to quit firefox. Every time I try to shut down my computer Firefox prevents it. I haven't updated Firefox yet, so it's an older program, but only by a month or two. What's going on and how do I fix it?
    </blockquote>
    This is the first time it's ever happened. I downloaded the new operating system for Firefox but I can't install it until the Firefox currently running on my laptop quits, which it won't.

  • When trying to uninstall iTune (because the current install has problems), I get the error message 2324.  What should I do to reinstall the application?

    When trying to uninstall iTune (because the current install has problems; iTune error message states it cannot sync and that I should reinstall the application; also, it fails when I tried to upgrade to the latest release), I get the error message 2324.  What should I do to reinstall the application?

    That installer error is a "Can't open file" error
    It suggest that you may have a corrupt file.
    Try running a disk check
    http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
    If it fixes errors try uninstalling iTunes again.
    If that doesn't work, is it possible for find out the name of the problem file, is further information available? Try looking in your Action center - that's on the control panel. Another place is in the Windows Error logs. From the start menu , right click on "Computer" and select manage, then Event viewer.
    If nothing emerges, try a manual uninstall of iTunes and related programs according to this method:
    http://support.apple.com/kb/HT1923
    Don't worry if an uninstall fails, that is expected. Go on to the part where you have to delete files (2. Verify iTunes etc completely deleted) . Hopefully you manage to find a file that can't be deleted, that is the one we will need to deal with.

  • Failed to get configuration from secure gateway. Contact your system administrator.

    I have an ASA 5515 running 9.1(1).
    One of my customers is attempting to connect with AnyConnect 3.1.02040 and after authenticating, he gets the message
    Failed to get configuration from secure gateway. Contact your system administrator.
    I have about 100 other customers who have not had this issue and can connect fine.
    Since it appears to be localized to his PC, he's uninstalled and reinstall the client, but to no avail. He's using Windows 7 Pro.
    On the ASA, while he is attempting to connect, I see this:
    15:48:04|302014|<<<REMOTE IP>>>|51032|<<<ASA IP>>>|443|Teardown TCP connection 495403 for outside:<<<REMOTE IP>>>/51032 to identity:<<<ASA IP>>>/443 duration 0:00:00 bytes 8241 TCP Reset-I
    14:48:04|725007|<<<REMOTE IP>>>|51032|||SSL session with client outside:<<<REMOTE IP>>>/51032 terminated.
    14:48:04|113039|||||Group <GroupPolicy_AnyConnect> User <etpdeir> IP <<<<REMOTE IP>>>> AnyConnect parent session started.
    14:48:04|734001|||||DAP: User etpdeir, Addr <<<REMOTE IP>>>, Connection AnyConnect: The following DAP records were selected for this connection: DfltAccessPolicy
    14:48:04|113008|||||AAA transaction status ACCEPT : user = etpdeir
    14:48:04|113019|||||Group = ibmdtsc, Username = etpdeir, IP = 124.128.162.43, Session disconnected. Session Type: AnyConnect-Parent, Duration: 0h:41m:41s, Bytes xmt: 885580, Bytes rcv: 1343, Reason: Connection Preempted
    14:48:04|716002|||||Group <GroupPolicy_AnyConnect> User <etpdeir> IP <<<<REMOTE IP>>>> WebVPN session terminated: Connection Preempted.
    14:48:04|113009|||||AAA retrieved default group policy (GroupPolicy_AnyConnect) for user = etpdeir
    14:48:04|113004|||||AAA user authentication Successful : server =  172.29.128.126 : user = etpdeir
    14:48:04|725002|<<<REMOTE IP>>>|51032|||Device completed SSL handshake with client outside:<<<REMOTE IP>>>/51032
    14:48:03|725001|<<<REMOTE IP>>>|51032|||Starting SSL handshake with client outside:<<<REMOTE IP>>>/51032 for TLSv1 session.
    15:48:03|302013|<<<REMOTE IP>>>|51032|<<<ASA IP>>>|443|Built inbound TCP connection 495403 for outside:<<<REMOTE IP>>>/51032 (<<<REMOTE IP>>>/51032) to identity:<<<ASA IP>>>/443 (<<<ASA IP>>>/443)
    Any ideas?

    i had this problem.  for me the cause had to do with internet explorer TLS settings.
    in IE8 go to tools, internet options, advanced and under security I had to make sure Use TLS 1.0 was checked (only Use SSL 3.0 and Use TLS 1.1 were checked.  I left them checked.).

  • Trying to reinstall Acrobat Pro X from disc onto win 8.1 system. (Previous installation got corrupted) Continually getting message 'Acrobat has detected another process which has not yet completed-'. Have now closed system both cold (full shutdown) and wa

    Trying to reinstall Acrobat Pro X from disc onto win 8.1 system. (Previous installation got corrupted) Continually getting message ‘Acrobat has detected another process which has not yet completed…’. Have now closed system both cold (full shutdown) and warm (restart) over 10 times. Every time I go to reinstall I get message.

    I would run http://labs.adobe.com/downloads/acrobatcleaner.html and delete any Acrobat folders that have been created, then try again. Be sure to log in as the administrator and disable anti-virus when you have problems like this.

  • HT4859 I keep getting a MSG that my device has not been backed up. Going thru manage iCloud I see ther are two backs (one for cell and iPad). They both say "incomplete ". If I delete them cloud backups will stop and I assume I will need to go back to the

    I keep getting a MSG that my device has not been backed up. Going thru manage iCloud I see ther are two backs (one for cell and iPad). They both say "incomplete ". If I delete them cloud backups will stop and I assume I will need to go back to the control.
    Has anyone else experienced this?

    After deleting the backups, go back to Settings>iCloud>Storage & Backup and make sure iCloud Backup is set to On (if not, turn it on).

Maybe you are looking for