System Copy and Logical system name conversion

Hello All,
Can any one let me know some inputs over these few queries.
1. How much time would a 500+GB clients take for Export and reimport after the system copy.
2. What would be run time of the BDLSS report ( Converting the logical system names) for a typical 1500 GB QTY system
The requirement is my QTY has 3 clients, and i would like to refresh it with my PRD data. How do i safely perform thia activity with the least downtine possible and please note, the clients are around 500+ GB huge..
Thanks in advance for your inputs.
Rgds,
Sri

Hi Frank,
the parameters of my installation are as folows.
Appl Serv : OS - AIX (5.2 Version) and CPU's - 4 (Mem 20480) ::: DB serv : OS - AIX(5.2 Version) and CPU - 6 (Mem 22528)
The DB version is Oracle 9.2
We are on 4.7 enterprise version of SAP with SAPKA62055 patrch level.
br
Sri

Similar Messages

Business system and logical system names

hello experts,
Right now m creating scenarios of IDOCs, Files and RFCs. Just wanted to know that is it compulsory to give Business system name and Logical system names same?
Does it make difference if i will give both names different?
Regards,
H.S.

Hi,
I guess i have not explained you proprely.
Here logical system mean m asking abt the system name which we are using in RFC connections to make connection between two systems.
does Business system name and Logical system name should be same?
Actually right now we have done system copy of production system into our sandbox. So all the things are pointing to the production system.
I was just wondering, if i will just change ip/ hostname into the Technical system (ip of sandbox system) and keep business system name as it is( which is right now of production system)... then for me no need to create all ID Objects again. Its just an idea. So just wanted to check is it ok... bcz in ID i have more than 60 objects which i need to create again. and i have very less time
Or if anyone can tell me any good idea to do that.
Thankx in advance.
Regards,
H.S.

RFC and Logical System names

Hello......is it necessary to have RFC and Logical system name for the connected system to be identical?Is there any explanation behind this if thats true....

Hi Gaurav,
It is recommended, but not mandatory, right, Muthuraman?
The system uses some transactions to determine which RFC will be used for the communication between one system and another, for example, in transaction 'Define backend systems' in SPRO, you can define that the current SRM client has an ECC backend system named X and the RFC destination for this X system is Y (not necessarily the same name).
Regards,

Difference between client system and logical system

Hi all
Can any one explain about the client system and logical system??
When this message type will comes in to picture at the time idoc processing??
Thanks and Regards
Arun Joseph

hi Arun,
I am giving the complete info on idoc.pls chk once.then ur issue will be solved.ok
and to know the diffrence between client and logical system very keenly go thru this link
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=abouttheclientsystemandlogicalsystem&adv=false&sortby=cm_rnd_rankvalue
IDOC Administration
Step 1: Tcode: WE 46
Setting the Global Parameter for IDOC Interface
Step 2: Maintaing a Logical System
Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
Logical Systems, Define Logical systems
Go to Spro transaction
Step 3: Allocating Logical systems to the Client
Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
Logical Systems, Assign Client to Logical systems
Go to Spro transaction
Step 4: Setting up an RFC destination
Tcode: SM 59
Path: From the ALE Customizing in IMG, choose Communication, Define RFC
Destination
You can also do the Advanced Settings in the RFC Destination
Step 5: The PORT definition
TCode: WE 21
Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
Systems in Network, Asynchronous Processing, Assign Ports, Define Port
Step 6: Generating Partner Profiles
TCode: BD 82
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, PArtner Profiles and Time of Processing, Generate Partner Profiles
Step 7: Distributing the Model
TCode: BD 64
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, Maintain Distribution Model and Distribute Views
Technques for Distributing the Master Data:
Technique 1: The Push Approach
Executing the Process:
TCode: BD 10
Path: from the ALE Main Menu, choose Material Data Distribution, Cross
Application, Material, Send
Technique 2: The Change Pointer Technique
Enable Change Pointers Globally
TCode: BD 61
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution, Replication of Modified Data, Activate
Change Pointers
Enable Change Pointers Globally
TCode: BD 50
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution, Replication of Modified Data, Activate
Change Pointers for Message Type
Specify the Fields for which Change Pointers are to be written
TCode: BD 52
Path: From the ALE main Menu, Choose ALE Development, IDOCs, Change , Define
Change-Relevant Fields
How the Classification system works:
Creating a Class Type
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
Maintaing Status for the Class Types:
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
Maintaing Classification Status:
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
Maintaing Classes:
TCode: CL 01 (it is zero)
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Maintain Classes
Allocating classes to the Logical Syatems
TCode: BD 68
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Assign classes
to Logical systems
Filering at the IDOC level:
Identify the Filter Object:
TCode: BD 59
Path: From the ALE main Menu, Choose ALE Development, IDOCs,Data Filtering, Assign Filter Objects
Type to IDOC Field
Modify the Distribution model
How Segment Filtering Works:
Configuration:
Configring the segment-filtering technique is a one-step process.Just specify the segments to be filtered
TCode: BD 56
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Scope of the Data for Distribution, Filter IDOC Segments
The Reduced IDOC Type:
The reduced IDOC type allows to get down to the field level and specify the fields a recieving system does not need.
The System still needs the fields, but this has no effect on the recieving system because each field has a null value,
represented by a forward slash(/) in the field.
TCode: BD 53
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Scope of the Data for Distribution, Message Reduction,
Create Reduced Message Type
IDOC:
Complete Documentaion on any IDOC using TCode: WE 60
IDOC Display Tool: TCode: WE 02 or WE 05
IDOC DEfinition components:
Segment Components:
1. Segment Type (E1, Z1)
2. Segment Definition(E2, Z2)
3. Segment Documentation(E3, Z3)
E- SAP Defined
z- Custom Defined
IDOC runtime componets:
control Record:
Data Record:
Staus Record:
First Create the Segments using TCode: WE 31
and then create the IDOC using TCode: We3 30
first release the segments and then IDOC.
Creating a new Basic IDOC Type:
STEP 1: Analyze the Data:
STEP 2: Create Data Elements:
STEP 3: Create Segments:
STEP 4: Create Basic IDOC Type:
1. Execute TCode: WE 30
2. Select the Create new option and enter a description for your basic IDOC type
3. click the IDOC name, and click the create icon.
Enter the segment type and its attributes.
4. Keep on adding the segments as in step 3.
5. Save the basic IDOC type
Step 5: Release the Segment Type and Basic IDOC Type
STEP 6: Transport the Segments and Basic IDOC Type
Extending a Basic IDOC type:
STEP 1: Analyze the Data:
STEP 2: Create Custom Segments:
STEP 3: Create the IDOC Type:
STEP 4: Release the custom Segment and IDOC Extension
Develop the function module for fteching the Data and then inserting the data into IDOC using
EDIDD(for control Record) and EDIDC table(for DATA Record)
Configuring the Systen for IDOCs
Configure an Outboubd Process that uses Message Control
Step 1: Create a new Message Type
TCode: We 81
Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
Step 2: link the IDOC type to the Message Type
TCode: We 82
Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
Step 3: Create a new Process Code
TCode: We 41
Path: From the Area menu of EDI, choose Control,Outbound Process COde
Step 4: Create or Change a Partner Profile
TCode: We 41
Path: From the Area menu of EDI, choose IDOC,Partner Profile
Configure an Outboubd Process for Stand-Alone Programs
1. Create a new message type
2. Link the IDOC type to the Message Type
3. Add the message to the ALE Distribution Model(use BD 64)
4. Create or change the Partner Profile
go through the following site to have screen shots.
http://www.****************/Tutorials/ALE/ALEMainPage.htm
thanks
karthik
reward me points if usefull

The central system has no logical system name

I am encountering one error message during configuring the Chnage Request Management in solution manager. As follows.
The central system has no logical system name
Message no. SCDT_DIST034
How do i define it?

Hello,
You may define logical system name via Tcode SCC4. Select your client and there is dropbox for Logical System. Click on the dropbox and you may received message "No value.." and ask you if you want to define the new logical system.
Please ensure the rec. logical scheme is : <SID>CLNT<CLNTNO.>
Hope this could help you.
Regards,
AZLY

RFC Destination and Logical System

Hi Friends,
Can anybody tell me how the RFC Destination and Logical System are related to each other?

Hi,
In any ALE scenario u need one sender and one receiver system.
Logical systems are just logical representation of these systems but in case of RFC destination u specify technical parameters for those systems like IP address and username and password to connect to that system.
Thus when u create port i.e.we21 u specify actual RFC destination for the system to which u want to connect and when u create partner profile for that logical system u specify this port so when u want to send data to this logical system i.e receiver system port will be used which in turn has RFC destination which will be used to connect to that system.
In simple terms logical systems are logical representation of any system and RFC destinations are physical/techinical systems.
Thanks.

Diffebetween Business system and Logical system...

what is the difference between Business system and Logical system...

Hi
Business system is a logical layer needed for configuration in integration directory. On the other site technical system is physical representation of your technical landscape. In case of SAP technical systems you can have more than one business system relation. In that situation there is relation one client to one business system.
If your technical system changes, then you definitely need to point this new technical system to the existing Business system which has been used to do all the Configurations in the Integration Builder.
Re: business system
Re: business system
Thanks

Create a client and logical system for BW

Hi all,
Can anyone show me how to create a BW client?
create a BW client and logical system for BW client.
create sourcesystems for the other clients in BW.
I have follow some documents
B84: BI Connectivity
B03: General Settings BI Integration
But it's not working the data can't flow to BW server.

hi,
check out the following thread's. it will guide you
Connection steps for SAP BW and R/3
Info required while creating source system
R/3 Source system creation error in BW 7.0
regards
harikrishna N

Difference between system copy and Remote Client copy?

Hi,
Can any body suggest me , What are the major difference between System copy and Remote Client Copy.
As per my knowledge , Both are different
1.In system copy entire data recovered mean copy from Source to target
2.In Remote client copy All Client data can't me import if you choose SAP_ALL profile also
I hope Transaction data and user data can't copied
Anybody share this Question and Give me some idea about this
If anybody give brief explanation that is very gratefull.
regards,
Balaram

Hi,
System copy will replicate all database from source to target system.
In remote copy only client in which you are performing the copy will get refresh. Also, remote client copy will be done between systems on same patch level. with SAP_ALL profile you can bring all data in target system including your transactional data.
Thanks
Sunny

Transformation inactive after system copy in SCM system

Hi Team,
I am posting this in BW keeping in mind that i am receiving issues in RSA1 transaction in my SCM system after the recent system copy. We did the system copy of SCM system and DTP conversion was also done using program RSBKDTP_BDLS. No errors occurred while the program ran. Now we have handed the system back to users for checking and they have reported an error saying there were some transformations missing in the system while checking the DTP . I went to RSA1 transaction in my SCM system and searched for the DTP and status seems to be in inactive status. I then clicked on change button and an error message mentioning the below appears.
Transformation XXXXXXXXXXXXXXXXXXXXXXXX inactive; action cannot be executed
Message no. RSBK260
Diagnosis
A transformation (XXXXXXXXXXXXXXXXXXXXXXXX) used by the DTP is inactive.
System Response
The action (request processing or DTP maintenance) was terminated.
Procedure
Activate the transformation. It connects the source XXXXXXXX XXXCLNT100 to the target XXXXXXXX.
I checked for the transformation entry in the table RSTRAN and did not find the same. Also i ran the program RSDG_TRFN_ACTIVATE to activate the transformation but nothing happens.
Have anyone came across this type of issue. I need some advise on the same and guide me in case if i am missing something, since i have not worked on this type of issue before.
Thanks for your help in advance.
Rajesh

Hi,
Due to the system copy we always get this issues.
Just ask your basis team to check source system assignments. they can do it.its their activity.
at BW Server, RSA1 -->menu tools--> manage source system, check the source system. same need to have at below we20.
at Tx - WE20, Partner type Ls---> under this you may see your target(SCM) and source system anmes. select source name and rigth side panel partner status need be active A.
At quality syste, activations thru program may not be happen. better to re-transport the dtp from dev system.
Thanks

Unable to convert send system to ALE logical system

Hi Expters,
I am doing FILE 2 IDoc Scenario as follows...
Created 1 BS for sender as Third Party...
Created 1 BS for receiver as WebAs ABAP...
I did everything perfect in IR and ID. But I am getting error in end to end testing. I am placing file in my local drive and the file has been picked up correctly.
And also I can see my Logical System name in ID(Adapter Specific Identifiers) towards my receiver BS. But There is no logical system is displaying for the sender BS in ID.
Still I am getting Error: Unable to Convert Sender System to ALE Logical System...
I have followed blogs and wikis but not successfull...
Do needful in this regard...
Regards,
Basha.

Hi,
Refer this link
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Problem Unable to convert the sender service to an ALE logical system
http://wiki.sdn.sap.com/wiki/display/XI/UnabletoconvertSendersystemtoALElogicalsystem
Regards,
Nithiyanandam

Regarding Error: Unable to Convert Sender System to ALE Logical System

Hi friends,
in File to IDoc scenario, i created a sender business system called bs_filetoidoc_send based on Standalone technical system and a receiver business system based on ABAP r/3 system. in my SAP IDES system which is dual stack (abap+java), XI client is 001 (LS: devclnt001) and r/3 client is 800 (LS: t90clnt090) i.e i'm posting idoc to t90clnt090.
I tried to send a text file. but while processing xml message in XI, i got an error saying "Unable to Convert Sender System to ALE Logical System".
then i searched the blogs and forum and found the solution. it was saying LS name was not assigned to BS bs_filetoidoc_send. so i went to SLD and tried to assign LS devclnt001 to my sender BS bs_filetoidoc_send, but got an error saying that "A business system with LS devclnt001 already exists". when i checked which is that BS, it is supposed to be the INTEGRATION SERVER itself with BS name INTEGRATION_SERVER_DEV.
then i configured my sender BS as INTEGRATION_SERVER_DEV itself which picked up the text file successfully and also receiver abap server received the IDOC with correct data and format with status 51. so scenario worked fine when i used my sender BS as INTEGRATION SERVER itself.
please clear my following doubts which arose after this scenario.
1) why the scenario didn't work when I used only standalone sender business system?
2) why should we assign a LS name of XI server to sender business system only in this scenario?
scenario worked according to my requirement, but using integration server itself as a sender BS confused though.
Many Thanks.

1) I can create any no of LS names using SALE
Yes you can create.
> 2) But I can assign a client to any one of those LS names (or 1 client will have only one LS name associated with it)
One Client will have one LS associated to it...and that can be any one of the LS..created.. use SCC4 to find the associated Ls for all the clients of a system
3) So anyways INTEGRATION_SERVER_DEV has to associated with the client 001 only, so finally I have to use INTEGRATION_SERVER_DEV only as my sender BS. Probleum is that I can't remove the LS name DEVCLNT001 from INTEGRATION_SERVER_DEV and assign it to bs_filetoidoc_send BS right. If I do so, I think I would get an error saying that INTEGRATION_SERVER_DEV is not associated with the LS name of client 001.
As the logical system defined in Partner profile is expected to arrive in Control record of IDoc..it should be passed in that...
Did u checked this blog../people/rajeshkumar.pasupula/blog/2009/03/16/unable-to-convert-the-sender-service-to-an-ale-logical-system so as per you need the explaination in the blog need to associate the logical system name .
HTH
Rajesh

Can one physical system have multiple logical systems? if yes why?

can one physical system have multiple logical systems? if yes why?
Regards
sriman

Logical system is an ALIAS name for a physical LOCATION. so we may have more than 1 logical system name for a physical location.
eventhough its allowed,but normally we dont do that.
you can do this in FILE transaction.
Regards
srikanth

Error during System copy of SCM system

*Hi
We are performing system copy of SCM system. The Java was not at all running in the system now while performinfg system copy we are facing following errror.*
ERROR 2009-10-23 12:05:39.123
CJS-30071 Execution of UTL tool 'C:\j2sdk1.4.2_12-x64\bin\java.exe -classpath E:\usr\sap\SD2\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/iaik_jce.jar;
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/iaik_jsse.jar;
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/iaik_smime.jar;
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/iaik_ssl.jar;
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/w3c_http.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/antlr.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/exception.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/jddi.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/logging.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/offlineconfiguration.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/opensqlsta.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/SDMutil.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/SLUtil.jar;E:\usr\sap\SD2\DVEBMGS00\exe\ojdbc14.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/SCM51/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=SD2 -dsn=jdbc/pool/SD2 -ssprops=E:/usr/sap/SD2/SYS/global/security/data/SecStore.properties -ssk=E:/usr/sap/SD2/SYS/global/security/data/SecStore.key' aborts with return code 64 due to a database connection error. DIAGNOSIS: The connection parameters are wrong or the database server has been shut down. SOLUTION: Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/SCM51/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/PREEXP/UTL.java.log' for more information.

Hi.
>SOLUTION: Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/SCM51/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP
>/PREEXP/UTL.java.log'
Hi,
Could you please paste above logs here and also check whether database is up or not...
Thanks
Sunny

Error during System Copy in SCM system

*Hi
We are performing System Copy of SCM system. Java was not running in the system from the starting. we are facing following error while performing system copy* Please Help..
Oct 23, 2009 12:05:38... Info   : Successfully parsed!
Oct 23, 2009 12:05:38... Info   : Executing command Export...
Oct 23, 2009 12:05:38... Info   : Establishing DB connection...
Oct 23, 2009 12:05:39... Path   : Exception : The DataBase is down or the connection parameters are wrong: -sid=SD2 -dsn=jdbc/pool/SD2 -ssprops=E:/usr/sap/SD2/SYS/global/security/data/SecStore.properties -ssk=E:/usr/sap/SD2/SYS/global/security/data/SecStore.key -keyphrase=null
java.lang.Exception
     at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1141)
     at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:413)
     at com.sap.exception.BaseException.<init>(BaseException.java:302)
     at com.sap.sl.ut.infoprovider.exceptions.UTInfoException.<init>(UTInfoException.java:96)
     at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:215)
     at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.constructSystemInfo(DataBaseInfoFactory.java:624)
     at com.sap.sl.ut.manager.command.Export.executeExportKDB(Export.java:56)
     at com.sap.sl.ut.manager.command.Export.execute(Export.java:80)
     at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
     at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:60)
     at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:56)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:283)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:278)
     at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:790)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:362)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.sl.ut.manager.persistence.db.DBConnection.connectViaSecureStore(DBConnection.java:159)
     at com.sap.sl.ut.manager.persistence.db.DBConnection.connect(DBConnection.java:171)
     at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:213)
     at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.constructSystemInfo(DataBaseInfoFactory.java:624)
     at com.sap.sl.ut.manager.command.Export.executeExportKDB(Export.java:56)
     at com.sap.sl.ut.manager.command.Export.execute(Export.java:80)
     at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
     at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:60)
     at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:56)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Oct 23, 2009 12:05:39... Info   : Severe (database) error. Return code: 64

> We are performing System Copy of SCM system.
How did you do the system copy? Did you use sapinst and export the Java content?
Markus

System Copy and Logical system name conversion

Similar Messages

Maybe you are looking for