System copy from SAP R/3 47x110 with Oracle 10.2 to Oracle 11.2
Hello,
I want to do a system copy from SAP R/3 4.7 Enterprise 47x110 with Oracle 10.2 to a new machine with same SAP version but with oracle 11.2. (After this I will upgrade to ERP 6.0)
I will do this with export/import but I don't find any documentation (manuals or notes).
I only find this:
Note 1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10
but this note is only for a new installation, I don't know if this work with system copy
Note 516246 - INST- System Copy for SAP Systems based on SAP Web AS 6.20
This don't have information about oracle 11.2
I read the manual "Homogeneous and Heterogeneous System Copy for SAP® Systems Based on SAP Web Application Server 6.20" but this also don't say nothing about oracle 11.2
Can you help me? Where can I find this documentation and what DVDs (master and kernel) should I use?
Best regards
Hi Juan,
Thanks for your answer.
That is my doubt, what installation master shoud I use for export oracle 10.2 and import in oracle 11.2?
Note "1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10" say that I can use installation master of R/3 4.7 Set 2 (47x200) to install a new system.
I found this media:
51033746_9 Installation Master 6.20/6.40 Linux on x86_64 64bit
and
51040087_7 NW 04 SR1 Inst. Mst. Linux x86_64 64bit f. Oracle 10.2/11.2
I think this is the note that I need:
Note 1478351 - Oracle 11g Support on UNIX: 6.40-Based SAP Systems
Similar Messages
-
PI 7.11 sp6 system copy causes target sys to register with source
Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I could not run the "wizard for post copy" since I'm on 7.11sp6. Yes, I know they "downported" it but I don't have those latest LMtools type packages. Anyway, I'm OK with that.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
RFC 399 unable to connect
I'm certain the user is NOT locked and the password is correct for PILDUSER.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
Also, now my PROD system shows the PIT system as a "non-central adapter engine".
Ughh! I'm totally stuck. I'm not sure what to do.
It's as if the PIT (PI training) system somehow is linked to PIP (PI prod). It's like PIT doesn't think he is his own box...
Any ideas? I'm resisting opening a message because this will be so hard to explain to sap support.
--NICKHi Nick,
We went thru the same issue. Fortunately, it was between Dev to sandbox. I stopped the dev system and changed the exchange profile parameters to sandbox hostname and brought the Dev up to fix the issue.
Prod showing as Non-Central Adapter engine :- Check your Business System in SLD and In CIM Instances in SLD, check your XI Integration server assigned to right Business System.
Note 764176 - Error in XI due to inconsistent SLD contents :- helped me come over PI post step issues.
Thanks,
Arjun -
Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA
Hi
I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
After, during the import in the target system I get the following error message:
vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66 finish processing of package SAP0000
You can see below the detail of the 5 packages in error:
SAPAPPL0_1_5
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
SAPZPSA
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
SAPDODS
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB
SAPDFACT
DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
(DB) ERROR: DDL statement failed
( ALTER TABLE "/BI0/F0TCT_C01" ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131 ) TABLESPACE "" )
DbSlExecute: rc = 99
(SQL error 1741)
error message returned by DbSl:
ORA-01741: illegal zero-length identifier
(DB) INFO: disconnected from DB
SAPZOSO
DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
(DB) ERROR: DDL statement failed
(CREATE TABLE "/BIC/B0000989000" ("REQUEST" VARCHAR2 (000090) DEFAULT ' ' NOT NULL, "DATAPAKID" VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "PART
NO" NUMBER (000010) DEFAULT 0 NOT NULL, "RECORD" NUMBER (000010) DEFAULT 0 NOT NULL, "PLANT" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "MATERIA
L" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "RPA_CURUOM" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RPA_MVF" NUMBER (000017, 000002) DEFAULT 0 NOT N
ULL, "PRICE_UNIT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RPA_QTYUOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_SSMFGR" VARCHAR2 (000024)
DEFAULT '00000000' NOT NULL, "BASE_UOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "FRE_PLNPUR" VARCHAR2 (000036) DEFAULT ' ' NOT NULL, "FRE_MINS
TK" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SERLEV" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SELCLS" VARCHAR2 (000003) DEFAULT '
0' NOT NULL, "FRE_REPLST" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "ABCKEY" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RECORDMODE" VARCHAR2 (000003)
DEFAULT ' ' NOT NULL, "RT_SERVLEV" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RT_SUPS" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "VAL_TYPE" VARCH
AR2 (000030) DEFAULT ' ' NOT NULL, "PUR_GROUP" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VPNEU" NUMBER (000017, 000002) DEFAULT 0 NOT NULL,
"CURRENCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VRKPE" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "DISMM" VARCHAR2 (000006) DEFAULT ' '
NOT NULL, "SALES_UNIT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VP_BT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_BT" NUMBER (000017,
000003) DEFAULT 0 NOT NULL, "RT_VP_NT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_NT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "R
T_VWAERBT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VWAERNT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VPMEIBT" VARCHAR2 (000009) DEFAULT '
' NOT NULL, "RT_VPMEINT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "LOC_CURRCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "UNIT" VARCHAR2 (000009)
DEFAULT ' ' NOT NULL, "CM_MCATDIV" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT1" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT2" VARCHAR2
(000054) DEFAULT ' ' NOT NULL, "CM_CDT3" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT4" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_HIEID"
VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "CPSTLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "CPSVLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL
, "STOCK_VAL" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "STOCK_QTY" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RT_SEASON" VARCHAR2 (000012)
DEFAULT ' ' NOT NULL, "RT_SEASYR" VARCHAR2 (000012) DEFAULT '0000' NOT NULL, "CALDAY" VARCHAR2 (000024) DEFAULT '00000000' NOT NULL, "CALWEEK"
VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "RF_BNDID" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "/BIC/ZCATTR3" VARCHAR2 (000006) DEFAULT ' ' NOT
NULL, "/BIC/ZCSTYLE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCIMAGE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCBRNDTYP" VARCHAR2 (000
003) DEFAULT ' ' NOT NULL, "/BIC/ZCGROUPE" VARCHAR2 (000054) DEFAULT ' ' NOT NULL) PCTFREE 10 PCTUSED 00 INITRANS 001 TABLESPACE STORAGE (
INITIAL 0000000016 K NEXT 0000001024 K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0000
FREELISTS 001 FREELIST GROUPS 01) PARTITION BY RANGE ("PARTNO") ( PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN (00000
00002) NOCOMPRESS ) )
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DBhello,
Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
let me know how it goes.
Regards,
Michael -
System copy from PRD to QAS based ABAP system EHP4.
Hi guys,
I have to perform homogenous system copy from PRD to QAS.
My PRD is ECC6.0 EHP4 release 701 sp 103( SAP_basis) with oracle ver 10.2.0.4.0.
Is there any specific procedure for EHP4 or i can follow the below mentioned guide.
https://websmp204.sap-ag.de/~sapidb/011000358700000514722009E.pdf.
What pre-requisite i need to take care before doing the system copy?
Regards
AbhishekHi,
All pre-requisite is there in system copy guide.Apart from that take user master backup of quality system and after system copy, import the user master data back so that you have same users in quality system.
Also, take RFC's backup also.
Thanks
Sunny -
Is it feasible to do System copy between SAP r/3 4.7 and ECC 6.0?
Hello Everyone,
Please let me know is it possible to do a system copy between two different SAP versions( SAP R/3 and ECC6.0 ABAP stack)
Background:
OS: Windows 2003
DB: MSSQL 2005
Appreciate your response
Thanks,
VadivambalHi,
We have done the system copy from production(till dec data) to sandbox and then upgarded from R/3 4.7 to ECC 6.0.
Now the upgraded server has a data till december and our functional team wants to have all data from current production(r/3 4.7) to Sandox (test upgarde m/c) for testing since some of new applications have gone live after dec.
Please suggest me how to we bring those data to test upgarde machine.
Will client copy help in this case?
Please let me know
Thanks,
Vadi -
Homogeneous system copy from ORacle 10.2 to 11.2 ?
Hello,
We are moving our SAP infrastructure to a new datacenter.
We are currently running 15 SAP systems (ABAP and J2EE) on HP-UX 11.23, Oracle 10.2 and are planning to relocate our
SAP instances on HP-UX 11.31 ( Oracle 11.2 Ready) but we intend to stay on Oracle 10.2 and then in a few months upgrade to Oracle 11.2, to benefit from full SAP support.
We will be using the homogenous system copy technique.
Is it possible to perfrom an homogeneous system copy from Hp-UX 11.23 Oracle 10.2 to HP-UX 11.31 to Oracle 11.2 ?
I am quite certain that I have read a similar discussion on SDN, but I can't find it anymore.
Thank you very much.
RegardsHi,
You can check compatibility via PAM section on SAP Market place.
however , it is allowed to migrate to below new combination considering your SAP platform as NW 7.0.
released Database Version :Operating System :Date :Status
ORACLE 11.2 64-BIT HP-UX 11.31/IA64 64BIT 30.03.2010 Released
ORACLE 11.2 64-BIT HP-UX 11.31/PA-RISC 12.07.2010 Released
Regards,
Edited by: Rupali B on Feb 20, 2012 6:06 PM -
New Development system copy from Production
Hi All,
Hope you can help me out here with some ideas.
We are currently planning to implement a new SAP BW Development system, and for this we would like to make it a 1:1 copy of our current production system. Meaning all from customizing, ABAP, workbench objects etc.
But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
My question is then, is there any other ways to do this when system copy is a no go? I know we can do client copy but then we will not get all the workbench / ABAP programs which we need.
Any ideas on how to do this?
Thx. in AdvanceHi Rasmus,
But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
Options 1: As BI objects are cross client , copying client will not solve your purpose 100%.
You can perform system copy and then clean up data in DEV
Option 2: You can create a new Development and then create TRs for required configuration objects and move to new development system.
Option 3: Use SLO tools to perform container copy without any data.
Hope this helps.
Regards,
Deepak Kori -
System Copy from ABAP Stack to ABAP+Java Stack
Hi,
Is it possible to system copy (homogeneous or heterogeneous) from a system based on ABAP Stack to a system based on ABAP+Java Stack? Is it the normal system copy procedure or something aditional is required to do. Pl. advise. Thanks
regards
Edited by: Abdus Samad on Oct 24, 2008 8:13 AMIt depends on what you want to copy, a system copy will always wipe out the existing target. But if you want to only copy data, you might be able to do a client copy. You can start with this SAP note: [552711 - FAQ: Client copy|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=552711]
Regards Michael -
Heterogeneous System Copy from MS SQL to Oracle 11g
Good day friends,
I am currently in the stage of running SAPINST to continue the System Copy to the Target (i.e. the export is complete).
This may seem like a rudimentary question, but I am trying to implement Oracle 11g as the new database (and the SAP version of ECC 5). Now when I execute the sapinst, I only get the option for the Client on 9.2 and the RDBMS on 10.2.0.4.
I would like to specify 10.2 for the Client and 11g for the RDBMS, but those options are not included in the SAPINST. What must I do to get these options in the SAPINST?
Any help would be welcome.
Thanks.I have run a system export from MSSQL and Windows Server, and I wish to run the import to Red Hat 5.4 and Oracle 11g.
I have used the latest ECC 5 Installation Master disk, which still does not have the option to install Oracle 11g. In fact, it only has the option to install Oracle 10g with an Oracle Client version 9. Surely there must be a newer option with Oracle Client 10?
Here is the product code for the Inst Master I downloaded.
6.20/6.40 based products Installation Master (Edition May 2008) Number 51033746 -
BI System copy: 2 SAP BW system should be connect to same R/3 system
Hi!
We have copy one SAP BW system SR1 to another SAP BW system SR2.
SR1 was connected to SAP R/3 system R31.
As consequence the new SAP BW system SR2 has also in RSA1 --> source system the entry of SAP R/3 system R31.
We would like to restore the source connection in new SAP BW system SR2.
By doing so a pop up comes up with decision to delete an existing connection R31<CLNT>XXX or not to delete this connection to the first BW System SR1.
Question:
Can 2 BW systems (SR1, SR2) be connected to the same SAP R/3 system (R31) and what should we do in this casee with pop up (delete or not delete the existing connection to the source BW System SR1)?
Any helpful information will be very appreciated!HI
> Can 2 BW systems (SR1, SR2) be connected to the same SAP R/3 system (R31)
Why not? One R/3 system can be connected to many BI/BW system.
> what should we do in this casee with pop up (delete or not delete the existing connection to the source BW System SR1)?
This pop up is coming because you created your SR2 system as a copy of SR1 system. If you have access to your R/3 system, you can check in table RSBASIDOC there will be only one entry R31CLNTXXX --- SR1CLNTXXX which is creating problem
What you can do is to run one FM RSAP_BIW_DOSCONNECT ( in the new system) and delete the entry for R31CLNTXXX and SR1CLNTXXX. Then also delete some correspondign entries from EDP13, EDPP1 and EDP21. Then in the new system , from RSA1 create new connection. I Before creating the new source system connection, in your new BI system you can delete the RFC connection for the R/3 system from SM59. During creation of new connection this RFC will be generated once again automatically. should work fine.
Remember, DO NOT delete connection from RSA1 which in turn will delete all the dataSources.
Please also follow SAP Note 886102 - System Landscape Copy for SAP BW and NW BI carefully before doing ANYTHING with RSBASIDOC.
Regards
Anindya
Edited by: Anindya Bose on May 4, 2010 12:17 PM -
BW System copy from PRD to DEV - Reduce database size
Hi All
We are in the process of copying our existing Production BW system (3.5) to become a new Development & test system. We want to reduce the database size significantly from 1.4 Tb to about 150 - 200 Gb. We have deleted all cube and ODS data as well as much of the master data but still have much tablespace tied up in monitor entries (eg table RSMONMESS) and IDOCs. All of the notes I read say that we cannot delete from RSMONMESS in a "Prodcution" environment, however we are creating a new DEV system and really need to get rid of monitor entries anyway. So there are two questions:
1. Any idea how we can clear up table RSMONMESS or delete unwanted monitor entries ?
2. How can we delete IDOCs copied from our production system without archiving them ? (They are of no use in our new test system.)
Please help.
Many thanks in anticipation.
Paul Sullivan
Orica ITHi Paul,
See SAP Note 694895 - Performance and tables RSMON, RSDONE
Note Language: English Version: 5 Validity: Valid Since 29.11.2005
Summary
Symptom
Tables RSMON* (for example, table RSMONMESS) and tables RS*DONE (for
example, table RSSELDONE) continuously increase in size in the BW system
with each request that is created.
Currently there is no option to reduce these tables.
Do not delete any entries from these tables. If you did, this would have
the following consequences:
When you carry out the next check for the requests for which you have
deleted records from these tables, the check will not run properly.
The status of the relevant requests turns RED in the monitor, and also in
all affected data targets that contain the request.
The affected request and all subsequent requests are no longer visible in
the reporting - all queries on the affected data targets then only display
old data.
Numerous dumps will occur in various situations.
You will not be able to repair the errors caused by the deletion.
More Terms
RSMONMESS; RSSELDONE; Performance; RSMON; RSDONE;
Cause and Prerequisites
This is caused by a program error.
Solution
In the next BW release (BI in SAP NetWeaver 2004s - that is BW 7.0), you
will be able to archive entries from the RSMON* and RS*DONE tables using a
request archiving process that archives the administrative information for
requests.
After archiving, these tables are then considerably reduced in size.
Until then, there is unfortunately no option for reducing the tables.
Rgds,
Colum -
Need to start a program in Oracle System (External) from sap program
Hi guys,
I need to start a program in another oracle based system from sap program by writing native sql statements.
Does anyone have idea how to do this.
Rgds,
RamHi,
Here is another sample for procedures.Kindly reward points by clicking the star on the left of reply,if it is useful.
Code Sample for writing a procedure with input and output parameters
REPORT zzz_jaytest.
* Getting the regno and total as input parameters
PARAMETERS : p_regno(10) TYPE c DEFAULT 'R1000',
p_total TYPE i.
data : v_total type i.
* In this procedure, we are updating the total of a regno given as input.
* Here two parameters used in the procedure are input parameters.
* We are updating the record of regno entered in selection screen and
* adding the total entered to the already existing total. We have to give semicolon
* for the statement inside procedure.
exec sql.
CREATE or replace PROCEDURE PROC1 ( p_regno in char, p_total in number )
IS
BEGIN
UPDATE stu_det SET total = total + p_total where regno = p_regno;
END;
endexec.
* This is the code to execute the procedure for update.
* While executing the procedure, the parameter variable should be
* preceded with colon :
EXEC SQL.
EXECUTE PROCEDURE PROC1 ( in :p_regno, in :p_total )
ENDEXEC.
* In this procedure, we are selecting the details for the regno entered
* as input. Here p_regno is input parameter and v_total is used as output
* parameter. So that we can use the retrieved value of v_total in our
* ABAP program
exec sql.
CREATE or replace PROCEDURE PROC2 (p_regno in char, v_total out char)
IS
BEGIN
select total into v_total from stu_det
where regno = p_regno;
END;
endexec.
* This is the code to execute second procedure.
EXEC SQL.
EXECUTE PROCEDURE PROC2 ( in :p_regno, out :v_total )
ENDEXEC.
write : / 'Total of ', p_regno, ' is ', v_total. -
PING Process :: Checking App System availability from SAP R/3
Hi
Our requirement is to check Whether Application System is UP or DOWN before sending the data from SAP Server like Pinging the application system from SAP System.
We are using the Web Service as Target Application System & SAP R/3 as Source System now SAP R/3 will call one RFC ( like <i>Z_Ping</i> ) before calling any other RFC to send data to WebService. Following is the configuration -->
<b>SAP R/3 -- Sender RFC Adapter -- SAP XI -- Rec SOAP Adapter -- App System ( Web Service )</b>
Now can you tell me what is the appropraite way to do this, because in case of System Error ( in case when WebService is down or Server on which WS is installed is down ) XI is not receving any exception payload so no mapping is happening.
Though I created the " <u><i>Error</i></u> " xsd & used it as a Fault message but the mapping is not getting initiated.
Can you tell me how I can achieve this & suggest me the design specification.
Best Regards
- Lalit -hey
u can do this using alerts,configure alerts so that it gets triggered whenever anythin wrong happens with Z_ping.and if response is negative then dont send subsequent messages.
alerts will always work irrespective of mapping.
but one thing is that triggering/not-triggering the subsequent message will be manual coz u need to check the alert before u send messages
thanx
ahmad
Message was edited by:
Ahmad -
Source System changes from SAP System to BI Warehouse on ECC activation
We are in the process of building a new development environment from an existing development environment.
After copying from system backup in the new development environment we performed BDLS to map to new source systems. At this point of time the source system for ECC ("SAP System from Release 3.0E" was changed to type "SAP Business Information Warehouse".
Why does this happen?
How can we prevent this?
Thanks for your help.Hello.
Please check the following note if ti can be helpful to fix this issue.
1087980-ECC Source systems appearing in BI folder
Thanks,
Walter Oliveira, -
Heterogeneous system copy from MSSQL to Oracle
Dear Experts,
I have performed ABAP+JAVA system copy R3load based from Oracle to Oracle and MSSQL to MSSQL platform.
Homogeneous system copy many times.
But this is first time i am perfoming an Export from MSSQL source system with r3load Export method .....My Target system is havign Oracle 10.2.0.2 software installed along with installation prerequisites.
But while Importing the same MSSQL Export ...I am not getting any option for heterogeneous system copy.
I am running on ECC6.0 windows platform and i also have generated Migartion KEY.
But where should i put this key.
I have gone through system copy guide many times but unable to understand Exact options to follow to Migrate to Oracle target system. Appreciate if anyone can give me detail steps i need to carry on Target system
Best Regards,
AjitRMarkus,
Thanks for the help, i have done Export with mentioned way and this time DBSIZE.xml file got created under ORA directory ....i started installation at target system....It went smooth until phase Import java Dump Done. .....But during Post load activities It gave error...
When i tried connectivity to Oracle database it works fine and
R3trans -d gives below mentioned error....Looks like table does not exist....all ENV variables are also got set at target machine.....
Error as below
Now 'SAPSR3/<pwd>@TST' is connected (con_hdl 0, nls_hdl 0).
4 ETW000 389 0.171885
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 23682 0.195567
4 ETW000 [dev trc ,00000] Database instance TST is running on CSSLDELL-3 with ORACLE version 10.2.0.2.0 since 20080522
4 ETW000 4056 0.199623
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 14523 0.214146
4 ETW000 [dblink ,01299] ***LOG BZA=>table SVERS does not exist on database [dblink#3 @ 1299]
4 ETW000 8145 0.222291
4 ETW000 [dev trc ,00000] NTAB: SELECT COMPCNT FROM DDNTT FAILED 1021 0.223312
4 ETW000 [dev trc ,00000] NTAB: SELECT VERSION FROM DDNTT FAILED 520 0.223832
4 ETW000 [dbntab.c ,00000] *** ERROR => NTAB: SELECT VERSION/DBASE FROM DDNTT FAILED
4 ETW000 505 0.224337
4 ETW000 [dbntab ,01273] ***LOG BZY=>unexpected return code 103 calling NTAB [dbntab#3 @ 12737]
Please help...Points rewarded anyways.....
Maybe you are looking for
-
My iPod Touch battery is not working. I requested a repair through the Apple Support. On the final page, when I clicked the button that puts the info through with your credit card number, the resulting page gave an error (I wish I'd have saved it!).
-
DVD Studio Pro will burn but will not play on dvd player.
Hi, I have a 30 minute dvd with a menu that i burned yesterday. it will play on my mac but not our dvd player or any of our Pc's. I have a quickly approaching deadline and guidance would be appreciated. Andrew ilerp.com
-
How to populate default values in standard transactions
Hi abapers, what r the different ways to populate fields with default values while entering into standard transactions thanks in advance.
-
JTable Double-Object in the clipboard
Hello together, this is my first posting here. I've a JTable with Double-Objects. The Double-Objects in the JTable Cells are shown in the Format *1.000,99*. I used a Renderer to Format the Value in the Cells. If I use the STRG+C to Copy the Table Cel
-
Script issue,Java install from script, push out to servers.
this is a non standard install for Java that has to be installed from a script. basically this script will run against a given amount of servers, stop the required services ( pertains to the application that requires Java on the server), uninstall j