System Copy Information
hai
Can anyone tell about the System Copy ????
Wy we need the System Copy in SAP-BW ....
Wt we need to do for this one ???
Please send the note-184754
Please tell me or send any related document to [email protected]
I will assing the points
kumar
1)Make sure that an RFC destination exists with the new logical name in every connected BW or BW source systems. Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
2)If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW-systems and sourcesystems. Please read the notes 121163 and 369758 regarding details about transaction BDLS
3)Execute Transaction WE20 to reactivate the partner profiles. Choose "Partner type LS (logical system)" enter the logical system name of the partner in tab "classification", change the partner status from "I" (inactive) to "A" (active) and save
4)Check table RSBASIDOC to determine all the sourcesystem-connections ,confirm entries in fields these entries RLOGSYS and SLOGSYS.
121163 - 'Converting logical system names',
524554 - 'Storing destinations in the BW environment',
184322 - 'Procedure after DB copy of BW source systems'.
Similar Messages
-
Gurus,
If we perform a system copy for XI after migrating java-add-in target system, do we have to install Exchange infrastructure again as a fresh install. or just migrating java-add-in is enough?
Please let me know,
Regards,
N.SHi
Pleasee check below forum
Re: SLD_UC not registered
Thanks
Sunny -
We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM. This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM. This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched off.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, VMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation:
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with two 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair.
Our Problem:
Our problem is that for some reason a random VHDX gets copied to System Volume Information by "System" of the Clusterd Shared Storage (i.e. C:\ClusterStorage\Volume1\System Volume Information).
All VMs stops responding or responds very slowly during this copy process and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
This happens at random and not every day and different VHDX files from different VMs gets copied each time. Some time it happens during daytime wich causes a lot of problems, especially when a 200 GB file gets copied (which take a lot of time).
What it is not:
We thought that this was connected to the backup, but the backup had finished 3 hours before the last time this happended and the backup never uses any of the files in System Volume Information so it is not the backup.
An observation:
When this happend today I switched on ShadowCopy (previous files) and set it to only to use 320 MB of storage and then the Copy Process stopped and the virtual Machines started responding again. This could be unrelated since there is no way to see
how much of the VHDX that is left to be copied, so it might have been finished at the same time as I enabled ShadowCopy (previos files).
Our question:
Why is a VHDX copied to System Volume Information when scheduled ShadowCopy (previous version of files) is switched off? As far as I know, nothing should be copied to this folder when this functionis switched off?
List of VSS Writers:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Writer name: 'Task Scheduler Writer'
Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
State: [1] Stable
Last error: No error
Writer name: 'VSS Metadata Store Writer'
Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
State: [1] Stable
Last error: No error
Writer name: 'Performance Counters Writer'
Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}
Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
State: [1] Stable
Last error: No error
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {7848396d-00b1-47cd-8ba9-769b7ce402d2}
State: [1] Stable
Last error: No error
Writer name: 'Microsoft Hyper-V VSS Writer'
Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Instance Id: {8b6c534a-18dd-4fff-b14e-1d4aebd1db74}
State: [5] Waiting for completion
Last error: No error
Writer name: 'Cluster Shared Volume VSS Writer'
Writer Id: {1072ae1c-e5a7-4ea1-9e4a-6f7964656570}
Writer Instance Id: {d46c6a69-8b4a-4307-afcf-ca3611c7f680}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {fc530484-71db-48c3-af5f-ef398070373e}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {3792e26e-c0d0-4901-b799-2e8d9ffe2085}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {6ea65f92-e3fd-4a23-9e5f-b23de43bc756}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {71dc7876-2089-472c-8fed-4b8862037528}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {cb0c7fd8-1f5c-41bb-b2cc-82fabbdc466e}
State: [1] Stable
Last error: No error
Writer name: 'Cluster Database'
Writer Id: {41e12264-35d8-479b-8e5c-9b23d1dad37e}
Writer Instance Id: {23320f7e-f165-409d-8456-5d7d8fbaefed}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {f23d0208-e569-48b0-ad30-1addb1a044af}
State: [1] Stable
Last error: No error
Please note:
Please only answer our question and do not offer any general optimization tips that do not directly adress the issue! We want the problem to go away, not to finish a bit faster!Hallo Lawrence!
Thankyou for youre reply, some comments to help you and others who read this thread:
First of all, we use Windows Server 2012 and the VHDX as I wrote in the headline and in the text in my post. We have not had this problem in similar setups with Windows Server 2008 R2, so the problem seem to be introduced in Windows Server 2012.
These posts that you refer to seem to be outdated and/or do not apply to our configuration:
The post about Dynamic Disks:
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx is only a recommendation for Windows Server 2008 R2 and the VHD format. Dynamic VHDX is indeed recommended by Microsoft when using Windows Server 2012 (please look in the optimization guide
for Windows Server 2012).
Infact, if we use fixed VHDX then we would have a bigger problem since fixed VHDX are generaly larger then Dynamic Disks, i.e. more data would be copied and that would take longer time = the VMs would be unresponsive for a longer time.
The post "What's the deal with the System Volume Information folder"
http://blogs.msdn.com/b/oldnewthing/archive/2003/11/20/55764.aspx is for Windows XP / Windows Server 2003 and some things has changed since then. for instance In Windows Server 2012, Shadow Copies cannot be controlled by going to Control panel -> System.
Instead you right-click on a Drive (i.e. a Volume, for instance the C drive/Volume) in Computer and then click "Configure Shadow Copies".
Windows Server 2008 R2 Backup problem
http://social.technet.microsoft.com/Forums/en/windowsbackup/thread/0fc53adb-477d-425b-8c99-ad006e132336 - This post is about the Antivirus software trying to scan files used during backup that exists in the System Volume Information folder and we do not
have any antivirus software installed on our hosts as I stated in my post.
Comment that might help us:
So according to “System Volume Information” definition, the operation you mentioned is Volume Shadow Copy. Check event viewer to find Volume Shadow Copy related event logs and post them.
Why?
Furhter investigation suggests that a volume shadow copy is somehow created even though the Schedule for Shadows Copies is turned off for all drives. This happens at random and we have not found any pattern. Yesterday this operation took almost all available
disk space (over 200 GB), but all the disk space was released when I turned on scheduled Shadow Copies for the CSV.
I therefore draw these conclusions:
The CSV Volume has about 600 GB of disk space and since Volume Shadows Copy used 200 GB, or about 33% of the disk space, and the default limit is 10% then I conclude that for some reason the unscheduled Volume Shadow Copy did not have any limit (or ignored
the limit).
When I turned on the Schedule I also change the limit to the minimum amount which is 320 MB and this is probably what released the disk space. That is, the unscheduled Volume Shadow Copy operation was aborted and it adhered to the limit and deleted the
Volume Shadow Copy it had taken.
I have also set the limit for Volume Shadow Copies for all other volumes to 320 MB by using the "Configure Shadow Copies" Window that you open by right clicking on a drive (volume) in Computer and then selecting "Configure Shadow Copies...".
It is important to note that setting a limit for Shadow Copy Storage, and disabaling the Schedule are two different things! It is possible to have unlimited storage for Shadow Copies when the Schedule is disabled, however I do not know if this was the case
Before I enabled Shadow Copies on the CSV since I did not look for this.
I now have defined a limit for Shadow Copy Storage to 320 MB on all drives and then no VHDX should be copied to System Volume Information since they are all larger than 320 MB.
Does this sound about right or am I drawing the wrong conclusions?
Limits for Shadow Copies:
Below we list the limits for our two hosts:
"Primary Host":
C:\>vssadmin list shadowstorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Shadow Copy Storage association
For volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
Shadow Copy Storage volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 320 MB (91%)
Shadow Copy Storage association
For volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
Shadow Copy Storage volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 320 MB (0%)
Shadow Copy Storage association
For volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
Shadow Copy Storage volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 320 MB (3%)
Shadow Copy Storage association
For volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
Shadow Copy Storage volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 320 MB (0%)
C:\>cd \ClusterStorage\Volume1
Secondary host:
C:\>vssadmin list shadowstorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Shadow Copy Storage association
For volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
Shadow Copy Storage volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 35,0 MB (10%)
Shadow Copy Storage association
For volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
Shadow Copy Storage volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 27,3 GB (10%)
Shadow Copy Storage association
For volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
Shadow Copy Storage volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 6,80 GB (10%)
C:\>
There is something strange about the limits on the Secondary host!
I have not in any way changed the settings on the Secondary host and as you can see, the Secondary host has a maximum limit of only 35 MB storage on the CSV, but it also shows that this is 10% of the Volume. This is clearly not the case since 10% if 600
GB = 60 GB!
The question is, why does it by default set a too small limit (i.e. < 320 MB) on the CSV and is this the cause of the problem? I.e. is the limit ignored since it is smaller than the smallest amount you can provide using the GUI?
Is the default 35 MB maximum Shadow Copy limit a bug, or is there any logical reason for setting a limit that according to the GUI is too small? -
SWPM - System Copy - Assertion Failed Unable to load database
Hello again,
(already the next question form me, sorry for this
I am executing a sysetm copy (DB-refresh) on ASE using SWPM.
However, in "Configure Components" step I get the error: Assertion failed. Unable to load database <SID of Target Sysetm>.
Where else can I check for errors?
I think it is still something on which I already worked (with other thread).
In sapinst_dev.log I found this
TRACE 2015-03-25 11:05:00.320
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2015-03-25 11:05:06.122 [iaxxgenimp.cpp:638]
CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> <p> An error occurred while processing option <i>SAP Enhancement Package 1 for SAP N
etWeaver 7.3 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or M
ove( Last error reported by the step: Assertion failed: Unable to load database <SID>.)</i>. You can now: </p> <ul>
<li> Choose <i>Retry</i><br>to repeat the current step. </li> <li> Choose <i>Log Files</i><br>to get more inform
ation about the error. </li> <li> Stop the option and continue later. </li> </ul> <p> Log files are written to /t
mp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF. </p> </body></html>
TRACE 2015-03-25 11:05:06.124 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
In sapinst.log I found this:
ERROR 2015-03-25 11:04:59.573
FCO-00011 The step syb_step_setup_preload with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind
|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_S
YB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_setup_preload was executed with status ERROR ( Last error reporte
d by the step: Assertion failed: Unable to load database <SID>.).
INFO 2015-03-25 11:04:59.772
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/__instana_tmp.xml.
INFO 2015-03-25 11:05:00.307
Removed file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.
INFO 2015-03-25 11:05:00.308
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.Hello Kiran,
I did a few tests again yesterday, and it was really a stupid mistake from myside.
The error message did mean, that there wasn't enough space.
It isn't the authority issue, it was a leak of space.
FYI, the complete DB-Size of Source System is required - NOT JUST RESERVED SPACE!!!
Thx for help and sorry for stealing your time :O -
Hi Supports,
I am using sapinst homogeneous system copy in Linux on sybase.
I stuck on the the step 27/49 "create Database".
I checked Firewall is off.
i got points in my sapinst_dev.log that "
1)The log segment in the target database 'SID' is too small (9216 MB) to accommodate the log segment from the dumped database (10240 MB)"
and
2)"Can't change the owner of the master, model, tempdb or sybsystemprocs database"
Do i need to increase "sybase/SID/saplog_1" ? because my "saplog_1" is 49 mb now.
if it is ! how do i increase in this stage.
can any one know about this error???
Thanks,
Aziz.Hi,
When i seen SID.log file so its showing deadlock and checkpoint occurring,
Is any solution ???
Is this because of networks?
we had 2 servers on this same IP. but i stopped one server and one is still running.
please find my SID.log file and revert back if any soltion.
==========================================================
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.03.21 12:12:31 =~=~=~=~=~=~=~=~=~=~=~=
ibssrv02:/sybase/IB1/ASE-15_0/install #
ibssrv02:/sybase/IB1/ASE-15_0/install # lscd ASE-15_0/install/lscd IB1lscd /IB1sybase/df -hexitsu - sybib1lscd IB1ls
IB1.log IB1_BS.log IB1_JSAGENT.log RUN_IB1 RUN_IB1_BS auditinit setperm_all showserver startserver sybhauser veritas
ibssrv02:/sybase/IB1/ASE-15_0/install # more IB1.log
00:0000:00000:00000:2014/03/21 11:03:36.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Performing space allocation for device '/sybase/IB1/sybsystem/master.dat' (0.39 Gb). This may take some time.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Finished initialization.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:38.32 server Configuration Error: Configuration file, '/sybase/IB1/IB1.cfg', does not exist.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: A configuration file was not specified or the default file '/sybase/IB1/IB1.cfg' does not exist. ASE creates
the default file.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: Using default file '/sybase/IB1/IB1.cfg' since a configuration file was not specified. Specify a configurati
on file name in the RUNSERVER file to avoid this message.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Unpublished rights reserved under U.S. c 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1718]: executing SQL statement ("update master.dbo.sysusages set loc..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1731]: executing SQL statement ("begin declare @val int select @val=..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model' does not exist. ASE will create it.
--More--(11%)
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model': beginning upgrade step [ID 1]: Initialize disk and create empty allocation units on master devi
ce.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID 2]: Bootstrap basic system catalogs in database.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID 6]: creating index (table syspartitions, index ncsyspartitions)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 8]: creating index (table systypes, index ncsystypes)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 10]: creating index (table sysobjects, index ncsysobjects)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 13]: creating table (table systabstats)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 26]: creating table (table sysprocedures)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 27]: creating table (table syscomments)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 28]: creating table (table syssegments)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 29]: creating table (table sysprotects)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 30]: creating table (table sysusers)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 31]: creating table (table sysalternates)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 32]: creating table (table sysdepends)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 33]: creating table (table syskeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 47]: creating table (table syspartitionkeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 51]: creating table (table sysreferences)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 52]: creating table (table sysconstraints)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 53]: creating table (table sysusermessages)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 54]: creating table (table systhresholds)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 55]: creating table (table sysroles)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 56]: creating table (table sysslices)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 60]: creating table (table sysstatistics)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 61]: creating table (table sysxtypes)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 62]: creating table (table sysjars)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 65]: creating table (table sysqueryplans)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 68]: creating table (table sysencryptkeys)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 73]: executing SQL statement ("update sysobjects set sysstat = sys...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 74]: executing SQL statement ("update syscolumns set type=66, user...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 80]: creating table (table sysattributes)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID 82]: creating table (table sysdams)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID 90]: insert basic data into bootstrap system tables
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 91]: executing SQL statement ("update systypes set length=@@maxpag...
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 245]: Update system roles in system tables.
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 248]: update system catalog protection data
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 606]: executing SQL statement ("select lct_admin('lastchance', db_i...
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1126]: Initialize systabstats with valid statistics
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1131]: Creating/Updating the last chance threshold for logsegment.
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1274]: executing SQL statement ("declare @dummy int")
--More--(13%)
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1241]: executing SQL statement ("insert into sysattributes (class, a...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1400]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1411]: executing SQL statement ("if not exists (select 1 from master...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1416]: executing SQL statement ("update sysroles set id=11 from sysu...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1502]: executing SQL statement ("if exists (select 1 from sysobjects...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1503]: executing SQL statement ("create view sysquerymetrics (uid, g...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1505]: executing SQL statement ("update sysattributes set char_value...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1550]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1554]: upgrade simulated statistics
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1564]: executing SQL statement ("declare @dbid int select @dbid = db...
00:0006:00000:00001:2014/03/21 11:03:39.93 server Database 'model': beginning upgrade step [ID 1650]: executing SQL statement ("dbcc upgd_grantrev_sysrole_perms('g...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1651]: updating builtin permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1652]: adding generic user 'usedb_user' to sysusers
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1653]: updating DBCC command permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server CREATE DATABASE: allocating 1536 logical pages (24.0 megabytes) on disk 'master' (1536 logical pages requested).
00:0006:00000:00001:2014/03/21 11:03:39.97 server Warning: The database 'sybsystemdb' is using an unsafe virtual device 'master'. The recovery of this database can not
be guaranteed.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x000013b4).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database sybsystemdb successfully created.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb', checkpoint=(864, 64), first=(864, 64), last=(864, 150).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 86.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Redo pass of recovery has processed 2 committed and 0 aborted transactions.
--More--(15%)
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x00001416).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Boot Count: 1
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Now loading ASE's new default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
--More--(17%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
--More--(18%)
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
--More--(20%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
--More--(21%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdatabases' (object ID 30): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdatabases_30' (partition ID 30) of table 'sysdatabases'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syslogins' (object ID 33): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syslogins_33' (partition ID 33) of table 'syslogins'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdevices' (object ID 35): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdevices_35' (partition ID 35) of table 'sysdevices'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysconfigures' (object ID 37): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysconfigures_37' (partition ID 37) of table 'sysconfigures'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysservers' (object ID 40): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysservers_40' (partition ID 40) of table 'sysservers'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysremotelogins' (object ID 41): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysremotelogins_41' (partition ID 41) of table 'sysremotelogins'. The logical page size of this t
able is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
--More--(23%)
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syscharsets' (object ID 45): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syscharsets_45' (partition ID 45) of table 'syscharsets'. The logical page size of this table is
16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysresourcelimits' (object ID 52): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysresourcelimits_52' (partition ID 52) of table 'sysresourcelimits'. The logical page size of th
is table is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Default Sort Order successfully changed.
00:0006:00000:00001:2014/03/21 11:03:40.01 server ASE shutdown after verifying System Indexes.
00:0006:00000:00001:2014/03/21 11:03:40.01 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:03:40.01 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.06 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.21 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:40.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Unpublished rights reserved under U.S. copyright laws.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel This software contains confidential and trade secret information of Sybase,
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Inc. Use, duplication or disclosure of the software and documentation by
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel the U.S. Government is subject to restrictions set forth in a license
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement between the Government and Sybase, Inc. or other written
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement specifying the Government's rights to use the software and any
--More--(24%)
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel applicable FAR provisions, for example, FAR 52.227-19.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using /sybase/IB1 as the 'SYBASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using ASE-15_0 as the 'SYBASE_ASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted on host 'ibssrv02' running Linux release 3.0.13-0.27-default version #1 SMP Wed Feb 15 13:33:49 UTC 2012 (
d73692b).
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using '/sybase/IB1/ASE-15_0/IB1.cfg' for configuration information.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Logging ASE messages in file '/sybase/IB1/ASE-15_0/install/IB1.log'.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Disk Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Ct-Lib Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Platform TCP network support seems IPv4-only.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted with TCP_NODELAY enabled.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network and device connection limit is 4081.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is running as process id 25438.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Number of blocks left for proc headers: 6920.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for each per engine cache.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for engine 0 local cache
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Using value of 'number of engines at startup' (1) for size of syb_default_pool.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 3, "syb_blocking_pool", type="Run To Completion", with 4 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 2, "syb_system_pool", type="Run To Completion", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 1, "syb_default_pool", type="Engine (Multiplexed)", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Aggressive task stealing enabled
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
00:0007:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 2 (NetController) is running as task 1127909376 on thread 7 (LWP 25453).
00:0008:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 3 (DiskController) is running as task 1127910096 on thread 8 (LWP 25454).
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Initializing virtual device 0, '/sybase/IB1/sybsystem/master.dat' with dsync 'off'.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Virtual device 0 started using asynchronous i/o.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Loaded default Unilib conversion handle.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Worker Thread Manager is not enabled for use in ASE.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mec
hanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel libsybibmmq - Sybase IBM MQ interface/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/OPT
/Thu Jun 6 12:02:54 2013
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Loaded encryption provider CSI-2.8M2-linuxamd64-2012/12/27 21:15:59 PST-sybcsi_openssl-OpenSSL 1.0.1b 26 Apr 2012.
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Encryption provider initialization succeeded on engine 0.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel SSL Plus v5.2.2 security modules loaded successfully.
--More--(26%)
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Network and device connection limit is 4081.
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Thread 6 (LWP 25447) of Threadpool syb_default_pool online as engine 0
00:0006:00000:00000:2014/03/21 11:03:41.28 server Active traceflags: 1623
00:0006:00000:00001:2014/03/21 11:03:41.28 kernel libomni1 - Component Integration Services: using 'Sybase Client-Library/15.7/P-EBF21002 SP100/DRV.15.7.0.10/Linux x86
_64/Linux 2.6.18-128.el5 x86_64 Native Threads/BUILD1570-026/64bit/OPT/Wed Mar 20 21:34:36 2013'
00:0006:00000:00001:2014/03/21 11:03:41.28 server Size of the 16K memory pool: 8192 Kb
00:0006:00000:00001:2014/03/21 11:03:41.28 server Opening Master Database ...
00:0006:00000:00001:2014/03/21 11:03:41.29 server Loading ASE's default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:41.29 server Recovering database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Database 'master', checkpoint=(1634, 132), first=(1634, 132), last=(1634, 173).
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database master.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started REDO pass for database 'master'. The total number of log records to process is 42.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Redo pass of recovery has processed 7 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed REDO pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Timestamp for database 'master' is (0x0000, 0x00006ec9).
00:0006:00000:00001:2014/03/21 11:03:41.30 server Recovery of database 'master' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Database 'master' is now online.
00:0006:00000:00001:2014/03/21 11:03:41.30 server The transaction log in the database 'master' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:41.37 server server is unnamed
00:0006:00000:00001:2014/03/21 11:03:42.06 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.001'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb', checkpoint=(864, 170), first=(864, 170), last=(864, 170).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:40.01 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'sybsystemdb' is (0x0000, 0x0000142f).
--More--(28%)
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Boot Count: 2
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.07 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Resident Node id: fb18efb51d00
00:0006:00000:00001:2014/03/21 11:03:42.07 server Transaction coordinator initialized.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'model', checkpoint=(864, 59), first=(864, 59), last=(864, 77).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database model.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'model'. The total number of log records to process is 19.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'model' is (0x0000, 0x000013cb).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'model' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The transaction log in the database 'model' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server Database 'model' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The logical pagesize of the server is 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server 0 dump conditions detected at boot time
00:0006:00000:00001:2014/03/21 11:03:42.08 server Clearing temporary database 'tempdb'.
00:0006:00000:00001:2014/03/21 11:03:42.09 server Tempdb 2 is added to the list of local temporary databases
00:0006:00000:00001:2014/03/21 11:03:42.09 server Timestamp for database 'tempdb' is (0x0000, 0x000013ce).
00:0006:00000:00001:2014/03/21 11:03:42.10 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.10 server Database 'tempdb' is now online.
00:0006:00000:00009:2014/03/21 11:03:42.10 kernel network name ibssrv02, interface IPv4, address 192.168.2.6, type tcp, port 7905, filter NONE
00:0006:00000:00001:2014/03/21 11:03:42.10 server Recovery complete.
--More--(30%)
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default unicode sort order is 'binary'.
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default sort order is:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'bin_iso_1' (ID = 50)
00:0006:00000:00001:2014/03/21 11:03:42.10 server on top of default character set:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'iso_1' (ID = 1).
00:0006:00000:00001:2014/03/21 11:03:42.10 server Master device size: 400 megabytes, or 204800 virtual pages. (A virtual page is 2048 bytes.)
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Warning: Cannot set console to nonblocking mode, switching to blocking mode.
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Console logging is disabled. This is controlled via the 'enable console logging' configuration parameter.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Initializing virtual device 1, '/sybase/IB1/sybsystem/sysprocs.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Virtual device 1 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:03:55.01 server Timestamp for database 'sybsystemprocs' is (0x0000, 0x000013ce).
00:0006:00000:00015:2014/03/21 11:03:55.13 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.002'.
00:0006:00000:00015:2014/03/21 11:03:55.13 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:03:55.14 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.003'.
00:0006:00000:00015:2014/03/21 11:03:55.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.004'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:22.28 server Increase the config parameter 'number of open objects' to avoid descriptor reuse. Reuse may result in performance deg
radation.
00:0006:00000:00015:2014/03/21 11:04:24.34 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.005'.
00:0006:00000:00015:2014/03/21 11:04:24.34 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.006'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:24.89 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.007'.
00:0006:00000:00015:2014/03/21 11:04:24.90 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Initializing virtual device 2, '/sybase/IB1/sybsystem/sybsysdb.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Virtual device 2 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:04:24.95 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.008'.
00:0006:00000:00015:2014/03/21 11:04:24.95 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.009'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Initializing virtual device 3, '/sybase/IB1/sybtemp/tempdbdev.dat' with dsync 'off'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Virtual device 3 started using asynchronous i/o.
00:0006:00000:00018:2014/03/21 11:04:27.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.010'.
--More--(32%)
00:0006:00000:00018:2014/03/21 11:04:27.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.011'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.012'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.013'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00020:2014/03/21 11:04:29.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.014'.
00:0006:00000:00020:2014/03/21 11:04:29.17 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00020:2014/03/21 11:04:29.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.015'.
00:0006:00000:00020:2014/03/21 11:04:29.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.016'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.017'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.018'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.019'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00025:2014/03/21 11:04:35.24 server Shutdown started by user 'sa'. SQL text: shutdown
00:0006:00000:00025:2014/03/21 11:04:35.25 server ASE shutdown by request.
00:0006:00000:00025:2014/03/21 11:04:35.25 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:04:35.25 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.30 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.45 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:04:36.50 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE -
Activating data in DSO got dump SAPSQL_EMPTY_TABNAME after BW system copy
Hi all,
We had an issue after system copy.
After a system copy the data in the standard DSOs(all of them) cannot be activated. The DOSs themselves are active, the transformations are active but if one attempts to load data and activate u2013 it does not work. The job terminates with shortdump SAPSQL_EMPTY_TABNAME.
Found the issue is caused by u201Cmore than one versionu201D of the change log.
We tried the Program RSAR_RSTSODS_CHANGELOG_VRS but it didn't work.
We had the solution like this:
After activating the DSO itself(the object) using RSDG_ODSO_ACTIVATE the issue disappears and the data can be activated. Issue also disappears. BUT Drawback: Activating the DSO causes the transformations to deactivate.Then we used the program RSDG_TRFN_ACTIVATE to activate all transformations. And then the issue disappeared.
Want to know what the root cause for this. From some SDN threads, mentioned BDLS job in the post refresh steps are not correctly done during system copy may cause this issue. How did the BDLS run wrongly cause this issue? And what is the exact correct way? We ran BDLS for each source systems inlcuding the target refreshed BW system itself by the default selection - conversion of Client-Dependent and Client-Independent Tables; because we used database copy
for the system refresh.
We also restored all source systems in RSA1 inlcuding the refreshed BW system own in the post-refresh steps.
Thank you very much for your information and suggestion.
HemingHi Arun, as you say two change log tables it´s strange. In fact in my opinion it´s not right but the problem is that the second change log table appears after executing std SAP report RSDG_ODSO_ACTIVATE in order to be able to activate the DSO. So the solution provided by SAP it works but i´m not sure if the right one. Besides this the original change log table is full of data while the second one is empty... for new loads which are gonna a be filled by the activation process ? I suppose the second one... will this have some impact with the data stored in the first one... not in theory but.... i do not feel confortable with the consequences of this report.
And the most important, it seems that the reason why the DSO and the change log table had problems is due to a some problems or missing steps after executing the BDLS after BW system refresh but nobody can confirm this point...
So, i´ve been able to solve the issue but now i have two change log tables for the same DSO.
Anybody has the same situation after executing the above mentioned SAP std report ?
Regards,
Joaquin Casas Baca-Castex -
PI 7.11 sp6 system copy Exchange Profile error code: 399
Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the copy itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
com.sap.rprof.dbprofiles.DBException: RFC call returned an error code: 399
I'm certain the user is NOT locked and the password is correct for PILDUSER. It'll give me a different error if I put the wrong password in, so I know it's hitting my system.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
I see these errors in the default trace and application log:
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND:
No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",
Name="PIT.SystemHome.<traininghostname>"
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="PIT.SystemHome.<traininghostname>"
at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
#2.#2011 11 03 13:49:47:008#0-500#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#7E3832DEA80F002B00000000008700C6#4804850000001902##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#J2EE_GUEST#0##0AFD01D4064C11E1CB5E7E3832DEA80F#0afd01d4064c11e1cb5e7e3832dea80f#0afd01d4064c11e1cb5e7e3832dea80f#0#Application [24]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
#2.#2011 11 03 14:51:18:096#0-500#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
#BC-ESI-WS-JAV#tcesiespsrv#7E3832DEA80F001100000000009A004C#4804850000001385##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####109F6812065511E1BF9C7E3832DEA80F#109f6812065511e1bf9c7e3832dea80f#109f6812065511e1bf9c7e3832dea80f#0#Service Runner [tcesiespsrv]#Plain##
+There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
SLDCHECK shows this:
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
I can't be the first person to run into this.
SO strange that I can actually plug in either my dev/QA or PROD hostname in the "ABAP connection" box and it WILL ACCEPT IT...but then, it registered my training system as a "non central adapter engine". I don't want that.
Any ideas?
Another issue is that the SLD PI information from the PIT system is missing the "Integration Directory". It has the other 5 entries...Adapter Engine, Domain, Integration Repository, Integration Server, RWB.
Thanks for reading this,
NICKHere is the error I get when I try to change the "abap connection" to the correct hostname:
RFC call returned an error code: 399
Stack Trace class com.sap.rprof.dbprofiles.DBException:<br><pre>at com.sap.rprof.dbprofiles.DBProfiles.checkReturn(DBProfiles.java:184) at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:105) at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1378) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:204) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfile(RemoteProfile.java:154) at com.sap.rprof.dbprofiles.ExchangeProfile.getExchangeProfile(ExchangeProfile.java:46) at com.sap.rprof.remoteProfile.webui.ProfileWebTree.<init>(ProfileWebTree.java:24) at com.sap.rprof.remoteProfile.webui.Edit.getWebTree(Edit.java:322) at JEE_jsp_treeexprof_4804850_1319481176000_1319565151782._jspService(JEE_jsp_treeexprof_4804850_1319481176000_1319565151782.java:59) at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:436) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:493) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:399) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:388) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:244) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428) at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247) at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327) </pre> -
Dear All,
Good Day
We are doing a BI Quality System Refresh from our BI Production System.
we are on Windows 2003 R2 Server & Database MS SQL 2005 Server.
We followed the Standard System Copy / Migration (Load Based) Installation method.
We finished the SAP installation positively up to the 13th Phase, while in the "IMPORT ABAP Phase" we are getting the following errors.
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 0, waiting 5, completed 102, failed 10, total 117.
Import Monitor jobs: running 1, waiting 4, completed 102, failed 10, total 117.
Import Monitor jobs: running 2, waiting 3, completed 102, failed 10, total 117.
Import Monitor jobs: running 3, waiting 2, completed 102, failed 10, total 117.
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 103, failed 10, total 117.
Loading of 'SAPDODS_13' import package: OK
Import Monitor jobs: running 1, waiting 2, completed 104, failed 10, total 117.
Loading of 'SAPDODS_6' import package: OK
Import Monitor jobs: running 0, waiting 2, completed 105, failed 10, total 117.
Import Monitor jobs: running 1, waiting 1, completed 105, failed 10, total 117.
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 106, failed 10, total 117.
TRACE 2011-05-01 11:58:56.355
Function setMessageIdOfExceptionMessage: nw.programError
WARNING[E] 2011-05-01 11:58:56.355
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
TRACE 2011-05-01 11:58:56.433 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-05-01 11:58:56.480 [sixxcstepexecute.cpp:950]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
TRACE 2011-05-01 11:58:56.527 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 1 Support Release 1 > Software Life-Cycle Options > System Copy > MS SQL Server > Target System Installation > Central System > Based on AS ABAP > Central System. You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/NW701/LM/COPY/MSS/SYSTEM/CENTRAL/AS-ABAP/. </p> </body></html>
TRACE 2011-05-01 11:58:56.527 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
*" In The importmonitor log "*_
INFO: 2011-05-01 11:57:57 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS_6' import package is successfully completed.
TRACE: 2011-05-01 11:58:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is started.
TRACE: 2011-05-01 11:58:26 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAP0000' import package:
K:\usr\sap\FBQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\Backup\ABAP\DATA\SAP0000.STR "C:\Program Files\sapinst_instdir\NW701\LM\COPY\MSS\SYSTEM\CENTRAL\AS-ABAP\DDLMSS.TPL" SAP0000.TSK MSS -l SAP0000.log -o D
TRACE: 2011-05-01 11:58:26 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAP0000' import package into database:
K:\usr\sap\FBQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -loadprocedure fast
INFO: 2011-05-01 11:58:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
WARNING: 2011-05-01 11:58:56
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2011-05-01 11:58:56
10 error(s) during processing of packages.
INFO: 2011-05-01 11:58:56
Import Monitor is stopped.
Kindly Do the needful.
Thanks in Advance.
Regards,
DeepakDid you execute the report SMIGR_CREATE_DDL on the source system and copied the resulting SQL files to the database dump directory?
Markus -
Error in "Run Java migration toolkit", doing a SAP system copy.
Hi all,
Migration to new hardware with system copy, get an error in CI installation on "Run Java Migration Toolkit".
From the sapinst.log:
ERROR 2009-05-13 12:46:47.188
FJS-00003 TypeError: ci.getInstanceDir() has no properties (in script NW_Doublestack_CI|ind|ind|ind|ind, line 120276: ???)
ERROR 2009-05-13 12:46:48.318
FCO-00011 The step InitPrivateContext with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|InitPrivateContext was executed with status ERROR .
From the sapinst_dev.log:
ERROR 2009-05-13 12:46:47.188 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: ci.getInstanceDir() has no properties (in script NW_Doublestack_CI|ind|ind|ind|ind, line 120276: ???)
TRACE 2009-05-13 12:46:48.038 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 23620
ERROR 2009-05-13 12:46:48.318 [sixxcstepexecute.cpp:951]
FCO-00011 The step InitPrivateContext with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|InitPrivateContext was executed with status ERROR .
TRACE 2009-05-13 12:46:48.368 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > High-Availability System > Based on AS ABAP and AS Java > Central Instance . You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/HA/AS/CI. </p> </body></html>
TRACE 2009-05-13 12:46:48.368 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
I had checked the INSTANCE_NAME parameter, in every profile, and is ok.
I tried a new instalation, after importing the profiles, and checking the INSTANCE_NAME, but got the same error.
Please, advice.
Thanks in advance.
Best Regards.
JorgeThanks Manoj for your advice.
We had already checked the procedures, we are working based on the System Copy Guide: "System Copy for SAP Systems Based on SAP NetWeaver 7.0 SR3 ABAP+Java".
I had to mention that source and target systems are HP-UX, 11.23, Itanium and the DataBase is Oracle 10.2.02.
The copy was made from a Central System (ABAP + Java) to a High-Availability System (ABAP + Java), and the problem appeared when copying the Central Instance.
Thanks in adavance.
Regards.
Jorge -
Problem in homogenus system copy
Sir ,
We are using SAP R/3 4.7 ,win2003 server& sql server2000. After attaching database ,i am facing a problem,dispatcher is not start.
I am sending devloper trace of dispatcher,wp devloper trace.
Please help
DISPATCHER DEVLOPER TRACE
trc file: "dev_disp", trc level: 1, release: "640"
Sun Mar 16 14:39:16 2008
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 25
intno 20020600
make: multithreaded, ASCII
pid 3364
***LOG Q00=> DpSapEnvInit, DPStart (01 3364) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 26 successfully loaded
shared lib "dw_xtc.dll" version 26 successfully loaded
shared lib "dw_stl.dll" version 26 successfully loaded
shared lib "dw_gui.dll" version 26 successfully loaded
Sun Mar 16 14:39:21 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 16560 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04A30040, size: 2515352)
DpShMCreate: allocated sys_adm at 04A30040
DpShMCreate: allocated wp_adm at 04A317A8
DpShMCreate: allocated tm_adm_list at 04A35858
DpShMCreate: allocated tm_adm at 04A35880
DpShMCreate: allocated wp_ca_adm at 04C537C8
DpShMCreate: allocated appc_ca_adm at 04C57E18
DpShMCreate: allocated comm_adm_list at 04C59588
DpShMCreate: allocated comm_adm at 04C595A0
DpShMCreate: allocated vmc_adm_list at 04C883A0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04C883C8
DpShMCreate: allocated wall_adm at 04C883D0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1698 MB
<ES> 1697 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( sapdev) [dpxxdisp.c 9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Sun Mar 16 14:39:22 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 25
Release check o.K.
Sun Mar 16 14:40:01 2008
ERROR => W0 (pid 3576) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3596) died [dpxxdisp.c 12170]
ERROR => W2 (pid 2716) died [dpxxdisp.c 12170]
ERROR => W3 (pid 3564) died [dpxxdisp.c 12170]
ERROR => W4 (pid 3092) died [dpxxdisp.c 12170]
ERROR => W5 (pid 2644) died [dpxxdisp.c 12170]
ERROR => W6 (pid 1616) died [dpxxdisp.c 12170]
ERROR => W7 (pid 3604) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W8 (pid 3208) died [dpxxdisp.c 12170]
ERROR => W9 (pid 3612) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W10 (pid 3624) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W11 (pid 2504) died [dpxxdisp.c 12170]
ERROR => W12 (pid 3128) died [dpxxdisp.c 12170]
ERROR => W13 (pid 780) died [dpxxdisp.c 12170]
ERROR => W14 (pid 2688) died [dpxxdisp.c 12170]
ERROR => W15 (pid 2524) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W16 (pid 3616) died [dpxxdisp.c 12170]
ERROR => W17 (pid 1196) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W18 (pid 204) died [dpxxdisp.c 12170]
ERROR => W19 (pid 2012) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3576 (SIGUSR2)
ERROR => DpWpKill(3576, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3596 (SIGUSR2)
ERROR => DpWpKill(3596, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-2716 (SIGUSR2)
ERROR => DpWpKill(2716, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3564 (SIGUSR2)
ERROR => DpWpKill(3564, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3092 (SIGUSR2)
ERROR => DpWpKill(3092, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2644 (SIGUSR2)
ERROR => DpWpKill(2644, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-1616 (SIGUSR2)
ERROR => DpWpKill(1616, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3604 (SIGUSR2)
ERROR => DpWpKill(3604, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-3208 (SIGUSR2)
ERROR => DpWpKill(3208, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-3612 (SIGUSR2)
ERROR => DpWpKill(3612, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-3624 (SIGUSR2)
ERROR => DpWpKill(3624, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-2504 (SIGUSR2)
ERROR => DpWpKill(2504, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-3128 (SIGUSR2)
ERROR => DpWpKill(3128, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-780 (SIGUSR2)
ERROR => DpWpKill(780, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-2688 (SIGUSR2)
ERROR => DpWpKill(2688, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-2524 (SIGUSR2)
ERROR => DpWpKill(2524, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-3616 (SIGUSR2)
ERROR => DpWpKill(3616, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-1196 (SIGUSR2)
ERROR => DpWpKill(1196, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-204 (SIGUSR2)
ERROR => DpWpKill(204, SIGUSR2) failed [dpxxtool.c 2468]
killing W19-2012 (SIGUSR2)
ERROR => DpWpKill(2012, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Mar 16 14:40:11 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Sun Mar 16 09:10:11 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3576 Ended no 1 0 0
1 DIA 3596 Ended no 1 0 0
2 DIA 2716 Ended no 1 0 0
3 DIA 3564 Ended no 1 0 0
4 DIA 3092 Ended no 1 0 0
5 DIA 2644 Ended no 1 0 0
6 DIA 1616 Ended no 1 0 0
7 DIA 3604 Ended no 1 0 0
8 UPD 3208 Ended no 1 0 0
9 UPD 3612 Ended no 1 0 0
10 ENQ 3624 Ended no 1 0 0
11 BTC 2504 Ended no 1 0 0
12 BTC 3128 Ended no 1 0 0
13 BTC 780 Ended no 1 0 0
14 BTC 2688 Ended no 1 0 0
15 BTC 2524 Ended no 1 0 0
16 SPO 3616 Ended no 1 0 0
17 SPO 1196 Ended no 1 0 0
18 UP2 204 Ended no 1 0 0
19 UP2 2012 Ended no 1 0 0
Dispatcher Queue Statistics Sun Mar 16 09:10:11 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Sun Mar 16 09:10:11 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun Mar 16 09:10:11 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Mar 16 14:40:16 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1252) (SOFT_KILL)
Stop icman
killing process (3028) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:1252 HANDLE:1524)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Mar 16 14:40:17 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1252 HANDLE:1524)
[DpProcDied] Process died (PID:3028 HANDLE:1516)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'sapdev'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/20
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1532
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3364) [dpxxdisp.c 8478]
Good Bye .....
*WP TABLE DEVLOPER TRACE*
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun Mar 16 14:39:22 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\DIF\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\DIF\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\DIF\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 25
M intno 20020600
M make: multithreaded, ASCII
M pid 3576
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3576) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 16560 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05230040, size: 2515352)
M DpShMCreate: allocated sys_adm at 05230040
M DpShMCreate: allocated wp_adm at 052317A8
M DpShMCreate: allocated tm_adm_list at 05235858
M DpShMCreate: allocated tm_adm at 05235880
M DpShMCreate: allocated wp_ca_adm at 054537C8
M DpShMCreate: allocated appc_ca_adm at 05457E18
M DpShMCreate: allocated comm_adm_list at 05459588
M DpShMCreate: allocated comm_adm at 054595A0
M DpShMCreate: allocated vmc_adm_list at 054883A0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 054883C8
M DpShMCreate: allocated wall_adm at 054883D0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sun Mar 16 14:39:24 2008
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\DIF\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 26
C patchcomment MSSQL: GetNextMsst1 error (754819)
C np:(local) connection used on SAPDEV
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 21990. hr: 0x8000ffff Cannot open user default database. Login failed.
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 4064, sev 0), Cannot open user default database. Login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 21990. hr: 0x8000ffff Cannot open user default database. Login failed.
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 4064, sev 0), Cannot open user default database. Login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 21990. hr: 0x8000ffff Cannot open user default database. Login failed.
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 4064, sev 0), Cannot open user default database. Login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 21990. hr: 0x8000ffff Cannot open user default database. Login failed.
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 4064, sev 0), Cannot open user default database. Login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 21990. hr: 0x8000ffff Cannot open user default database. Login failed.
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 4064, sev 0), Cannot open user default database. Login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 21990. hr: 0x8000ffff Cannot open user default database. Login failed.
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 4064, sev 0), Cannot open user default database. Login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 21990]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1200] [dbsh 1200 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1200] [dbsh 1200 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> <message text not available> [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1271]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9379]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapdev_DIF_01 on host sapdev (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun Mar 16 14:39:24 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 246]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3576) [dpnttool.c 357]
PLEASE SEND ME SOLUTION IT'S URGENT
Thanks in advance
KaranHi,
check 551915 - R/3 won't start after database restore or database copy
don't open two thread for same error.
homogenus system copy error
regards,
kaushal
Edited by: kaushal malavia on Mar 17, 2008 11:47 AM -
Hi Experts,
I am currently facing an issue/error while doing a homogeneous system copy with SAP NW 7.4 (SAP ERP 6.0 Ehp7) servers. Both source and target systems are test/demo servers and system copy procedure needs to be established as a part of implementation.
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or Move( Last error reported by the step: Assertion failed: Unable to load database RD3. Refer to trace file sapinst_dev.log for further information.)
Sybase ASE version = 15.7_122
sapinst_dev log file description -
Error description (sapinst_dev log file) –
Execution of the command "isql64 -e -w999 -Usa -SSAP-PROD-TEST:4901 -X" finished with return code 0. Output:
Password:
1> use master
1> load database RD3
2> from 'F:/Backup_RD1_04042015/rd1_s1.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s2.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server session id is: 33. Use this value when executing the 'sp_volchanged' system stored procedure after fulfilling any volume change request from the Backup Server.
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s1.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s2.dmp'
Msg 3105, Level 16, State 4:
Server 'RD3', Line 1:
Data on dump will not fit into current database. Need 101376 Mbyte database.
1> online database RD3
Msg 930, Level 14, State 1:
Server 'RD3', Line 1:
Database 'RD3' cannot be opened because either an earlier system termination left LOAD DATABASE incomplete or the database is created with 'for load' option. Load the database or contact a user with System Administrator (SA) role.
No matter how much I try to execute the commands for loading database (LOAD DATABASE & ALTER DATABASE commands), i's not working. I have already added the size mentioned above. Although it still didnt work the size of the DB grew by 99GB (displayed in the incresed size of F: drive in Windows.server 2012 r2 OS level.
Any help leading to closure of this error is highly appreciated. I have attached all necessary screenshots for your kind reference.
Thanks and regards,
M. NizamHi Nizamuddin,
Message text
Data on dump will not fit into current database. Need %d Mbyte database.
Explanation
This error occurs when an attempt is made to load a database dump into a database smaller than the dumped database. You cannot use dump database or load database to shrink a database, regardless of the amount of actual data in the database.
Action
If your goal is to load the database from the dump, you must increase the size of the database being loaded into to at least the configured size of the dumped database. You can do this with either the alter database command or by dropping and re-creating a larger database.
If your goal is to shrink the total size of a database, you cannot use dump and load. You must copy all the data out of the database using bcp, drop the database and re-create a smaller database, then re-create the database structure with scripts, and reload the data with bcp.
extend your current master *database* on the master *device* to a total size of 101376MB(or more) (use 'alter database' command)
alter database master on master = <size in MB>
If there isn't enough room on the master device AND the master device is either a file system device in a file system that has free space or was created on a raw partition that is actually larger than the master device was defined, then you can use the DISK RESIZE command to enlarge the master device
disk resize name = "master", size = <additional space in MB>
Regards,
V Srinivasan -
"System copy stops in "check DDIC password" step
Hi,
We performed a combined upgrade/unicode conversion to ECC5.0 Non-Unicode to ECC 6.0 Unicode ( Windows 2003 Server, Oracle 10gR2 ).
But at the end of import ( using R3load tool ), the import stops at "check DDIC password" step with error message :
"Test logon to SAP System D12 failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
We checked the system, it's online , and the user DDIC exists. But we could not logon using sapgui. it gives message :
"Programm SAPMS380 not found"
If any one could help
thank you
Pascal
file sapinst_dev.log :
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:13:39.460 [iaxxclogintimeout.cpp:92]
CLoginTimeout::run()
Login in progress
TRACE 2008-10-06 12:13:39.460
Connection request to guiengine backend by host 10.90.150.140
TRACE 2008-10-06 12:13:39.460 [iaxxgenimp.cpp:471]
CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE 2008-10-06 12:13:39.475 [iaxxgenimp.cpp:490]
CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation Master</title>
<dialog/>
TRACE 2008-10-06 12:13:39.522
Protocol version is 3.1
TRACE 2008-10-06 12:13:39.522
Send connect information
TRACE 2008-10-06 12:13:39.522
client logged on
TRACE 2008-10-06 12:13:39.803 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:03.131 [iaxxdlghnd.cpp:96]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2008-10-06 12:14:03.131 [iaxxcdialogdoc.cpp:212]
CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO 2008-10-06 12:14:03.147 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
INFO 2008-10-06 12:14:03.147 [synxcfile.cpp:177]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:471]
CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:490]
CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:05.522
current working directory is C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/
INFO 2008-10-06 12:14:05.522 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2008-10-06 12:14:05.522 [synxcfile.cpp:177]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\x.
TRACE 2008-10-06 12:14:06.553
Running with toplevel file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//toplevel.xml
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:14:06.741
Running with dialog file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//dialog.xml
TRACE 2008-10-06 12:14:06.881
Running with keydb file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//keydb.xml
TRACE 2008-10-06 12:14:07.194 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml
INFO 2008-10-06 12:14:07.209 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml'.
TRACE 2008-10-06 12:14:08.709 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml
INFO 2008-10-06 12:14:08.725 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml'.
TRACE 2008-10-06 12:14:17.928
SAPinst was started using commandline: G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214\sapinst.exe
TRACE 2008-10-06 12:14:17.928
SAPinst properties are :
GUISERVER_DIALOG_PORT=21212
GUISERVER_HTTP_PORT=4239
SAPINST_CONTROL_URL=control.xml
SAPINST_DIALOG_PORT=21200
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,SMDAgent
SAPINST_KEYDB_URL=keydb.xml
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_URL=.
SAPINST_PACKAGES_URL=packages.xml
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SKIP_DIALOGS=false
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=true
TRACE 2008-10-06 12:14:17.959 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaejs701.dll
TRACE 2008-10-06 12:14:18.69 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iacdlib701.dll
TRACE 2008-10-06 12:14:18.162 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaccdlib.dll
WARNING 2008-10-06 12:14:18.162 [synxcpath.cpp:912]
CSyPath::getOSNodeType(bool )
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
TRACE 2008-10-06 12:14:18.225 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iapasswdman701.dll
TRACE 2008-10-06 12:14:18.225
This is SAPinst, version 701, make variant 700_REL, build 967243
compiled on Mar 7 2008, 01:01:19
TRACE 2008-10-06 12:14:18.350 [synxcaccmg.cpp:640]
CSyADsPath::fromString(ONEPNET\d12adm)
Account ONEPNET/d12adm has ADS path 'WinNT://ONEPNET/d12adm'
TRACE 2008-10-06 12:14:18.428 [synxcaccnt.cpp:967]
iastring CSyAccountImpl::getSID(IUnknown* pUnk) const
d12adm has SID S-1-5-21-770850386-355409785-620655208-35637
TRACE 2008-10-06 12:14:20.678 [synxcuser.cpp:1076]
CSyUserImpl::isExistingOnOS()
existence check for user d12adm returned true.
TRACE 2008-10-06 12:14:20.678 [syxxccache.cpp:208]
CSyAccountCache::getUserImpl(name="ONEPNET\d12adm", sid="", create=false, ISyProgressObserver* )
inserted account (d12adm, S-1-5-21-770850386-355409785-620655208-35637, USER) into the accountcache.
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:175]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
= C:=C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
= G:=G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214
= J:=J:\Install_ECC6_64_uni\BS_2005_SR3_SAP_Installation_Master\IM_WINDOWS_X86_64
ALLUSERSPROFILE = C:\Documents and Settings\All Users
APPDATA = C:\Documents and Settings\d12adm\Application Data
CLIENTNAME = TAL-MOBILE
ClusterLog = C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles = C:\Program Files\Common Files
CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
COMPUTERNAME = SAPRH-PROD1
ComSpec = C:\WINDOWS\system32\cmd.exe
DBMS_TYPE = ora
dbs_ora_schema = SAPSR3
dbs_ora_tnsname = D12
FP_NO_HOST_CHECK = NO
HOMEDRIVE = C:
HOMEPATH = \Documents and Settings\d12adm
JAVA_HOME = C:\Program Files (x86)\Java\j2re1.4.2_09
LOGONSERVER =
CDBOUREGREG
NLS_LANG = AMERICAN_AMERICA.UTF8
NUMBER_OF_PROCESSORS = 8
ORACLE_HOME = D:\oracle\D12\102
ORACLE_SID = D12
OS = Windows_NT
Path = D:\oracle\D12\102\bin;C:\Program Files (x86)\Java\j2re1.4.2_09\bin;C:\Program Files (x86)\EMC\PowerPath\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\usr\sap\D12\SYS\exe\uc\NTAMD64
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB = D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64-multi-thread;D:\oracle\D12\102\perl\5.8.3\lib;D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64;D:\oracle\D12\102\perl\site\5.8.3;D:\oracle\D12\102\perl\site\5.8.3\lib;D:\oracle\D12\102\sysman\admin\scripts;
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_IDENTIFIER = EM64T Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 0f0b
ProgramFiles = C:\Program Files
ProgramFiles(x86) = C:\Program Files (x86)
SAPDATA_HOME = I:\oracle\D12
SAPEXE = G:\usr\sap\D12\SYS\exe\uc\NTAMD64
SAPINST_EXEDIR_CD = J:/Install_ECC6_64_uni/BS_2005_SR3_SAP_Installation_Master/IM_WINDOWS_X86_64
SAPLOCALHOST = saprh-prod1
SAPSYSTEMNAME = D12
SESSIONNAME = RDP-Tcp#1
SystemDrive = C:
SystemRoot = C:\WINDOWS
TEMP = G:\usr\sap\D12\tmp\1
TMP = G:\usr\sap\D12\tmp\1
TNS_ADMIN = G:\usr\sap\D12\SYS\profile\oracle
USERDNSDOMAIN = ONEPNET.INTRA
USERDOMAIN = ONEPNET
USERNAME = d12adm
USERPROFILE = C:\Documents and Settings\d12adm
windir = C:\WINDOWS
User: ONEPNET\d12adm, Id: S-1-5-21-770850386-355409785-620655208-35637
Working directory: C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:185]
syslib::logSystemState()
System information
==================
OS version, host name: Microsoft Windows [Version 5.2.3790 Service Pack 2] SAPRH-PROD1
RAM size (MB): 12287
Swap size (MB): 21708.6
TRACE 2008-10-06 12:14:20.709
Running with control file control.xml version=701 changelist=33819 product-id=d0e28628
TRACE 2008-10-06 12:14:20.709
Selected Service NW_ABAP_OneHost|ind|ind|ind|ind
TRACE 2008-10-06 12:14:20.709 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml
INFO 2008-10-06 12:14:20.709 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml'.
INFO 2008-10-06 12:14:20.959 [sixxcstepexecute.cpp:387]
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
TRACE 2008-10-06 12:14:29.428
Java script statistics: ScriptSize 4788012 CompileTimeInSeconds 8.437
TRACE 2008-10-06 12:14:29.459 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iajsmod.dll
TRACE 2008-10-06 12:14:29.537 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodos.dll
TRACE 2008-10-06 12:14:29.569 [synxccuren.cpp:1115]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:29.584
Call block:W2K_ServicePack_Check_ind_ind_ind_ind
function:W2K_ServicePack_Check_ind_ind_ind_ind_Preprocess
is validator: false
TRACE 2008-10-06 12:14:29.834
Status of Step |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password is not OK. Re execute only that step and go on in RESTART mode.
TRACE 2008-10-06 12:14:29.991 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml
INFO 2008-10-06 12:14:29.991 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml'.
TRACE 2008-10-06 12:14:30.131 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml
INFO 2008-10-06 12:14:30.147 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml'.
INFO 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:781]
Execute step checkDDIC000Password of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0
TRACE 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:850]
Execution of preprocess block of |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password returns TRUE.
TRACE 2008-10-06 12:14:30.272 [synxccuren.cpp:1115]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:30.272
Call block:NW_DDIC_Password_ind_ind_ind_ind
function:NW_DDIC_Password_ind_ind_ind_ind_SubComponentContainer_checkDDIC000Password
is validator: false
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstance.byNumber(00, saprh-prod1)
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstanceInstall.find(
function (instance) {
return instance.getNumber() == number && instance.getHostName().equals(host);
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall.find() done: 1 instances found
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall.getSystem(D12)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NW()
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NW() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall.getSystem() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers(D12)
TRACE 2008-10-06 12:14:30.319
t_NW_users.updateRow(, WHERE sid='D12'), updating
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.319 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWDialogInstance.getRFCUser() done
TRACE 2008-10-06 12:14:30.381 [syxxccuren.cpp:31]
CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPPARAM700', const iastring & '1')
Environment variable SAPPARAM700 set to value '1'.
TRACE 2008-10-06 12:14:30.397 [iaxxctrace.cpp:42]
CIaIcmAuth::traceInit()
Initialized SAP trace: tf is now set.
INFO 2008-10-06 12:14:30.412 [synxccuren.cpp:65]
CSyCurrentProcessEnvironmentImpl::removeEnvironmentVariable(iastring)
Removed environment variable SAPPARAM700 from current process environment.
TRACE 2008-10-06 12:14:30.412 [iaxxbsapparam.cpp:68]
CIaSAPParam::initializeDefaultValues_impl()
Read default profile values from kernel.
TRACE 2008-10-06 12:14:30.412 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodapp.dll
TRACE 2008-10-06 12:14:30.694 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodrfc.dll
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.084 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:33.957 [iaxxdlghnd.cpp:198]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:35.644 [iaxxdlghnd.cpp:198]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:44:40.278 [iaxxcnclhd.cpp:84]
CCancelHandler::doHandleDoc(IDialogDocument * pDoc )
ACTION_CANCEL requested
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> You are about to cancel the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System installation. <li> Choose one of the following: </li> <ul> <li> 'Continue' - to continue the installation. </li> <li> 'Stop' - to stop the installation and exit SAPinst. You can continue the installation later from this point<br>Note:<br>If you stop the installation after the installation activites have been started, do not use the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System, as it is not ready to be used. </li> </ul> </body></html>
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-10-06 12:44:41.840 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
INFO 2008-10-06 12:44:42.074 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.Hi,
The possible problem for the DDIC user could be, once the data imported the password of the DDIC got reset to older password as in ECC5, try login the system with sap* user and reset the password of DDIC, then login as DDIC user and set the password permannetly and retry the activity.
If sap* also shows with same problem try changing the password of sap* from DB level by executing the query(you can find solutions for this in SDN forum threads, check them). or try deleting the user sap* and recreate where user gets creted wiuth default pasword as "PASS" and logon and reset the user DDIC.
Regards. -
hi gurus,
I'm trying to make a system copy from WIN2000/ORA817 to WIN2003/ORA10g FOR R/3 4.6C SR2.
During the system-copy, I change the SCHEMA-ID from SR3 to DEV, and now it's in new tablespace layout, which means there're no PSAPDDICD/PSAPDDICI any longer.
I choose DBMIG.R3s to import Data, the db-loading has been finished, but the migration stopped during phase DBR3LICENSECREATE_NT_ORA, below are the dbmig.log
also I cannot use br*tools to show my tablespace due to invalid SAP License.
It's so werid, and I tried the Note 134592 - Importing the SAPDBA role ( sapdba_role.sql), but it doesn't work.
PS: when I do the system-copy for 46c SR2, can I change the db-schema ID or I have to retain it as SR3 for 46c, and change the SAP-SCHEMA ID to DEV?
Thank you all in advance if you can help on this.
Rgds, Sam
======DBMIG.LOG===========
INFO 2006-10-24 19:56:51
Creating the SAP System License
INFO 2006-10-24 19:56:51 DBR3LICENSECREATE_NT_ORA InternalInstallationDo:0
Create SAP license table.
ERROR 2006-10-24 19:56:51 DBR3LICENSECREATE_NT_ORA InternalInstallationDo:0
See logfile dev_slic for further information.
INFO 2006-10-24 19:56:51 DBR3LICENSECREATE_NT_ORA InternalInstallationDo:0
See logfile dev_slic for further information.
ERROR 2006-10-24 19:56:51 DBR3LICENSECREATE_NT_ORA InstallationDo:0
Phase failed.
ERROR 2006-10-24 19:56:51 InstController Action:0
Step DBR3LICENSECREATE_NT_ORA could not be performed.
ERROR 2006-10-24 19:56:51 Main
Installation failed.
ERROR 2006-10-24 19:56:51 Main
Installation aborted.
trc file: "dev_slic", trc level: 2, release: "46D"
[Thr 3780] Tue Oct 24 13:46:10 2006
[Thr 3780] SlicSapInstall: sysname: >DEV< connect: >1< rollback: >1<
[Thr 3780] Got TNS_ADMIN=
cnsh10sdev\SAPMNT\DEV\sys\profile\oracle from environment
[Thr 3780] Got ORACLE_SID=DEV from environment
[Thr 3780] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
[Thr 3780] Logon as OPS$-user to get SAPDEV's password
[Thr 3780] Connecting as /@DEV on connection 0 ...
[Thr 3780] -->oci_logon(con_hdl=0, user='', dbname='DEV')
[Thr 3780] Now I'm connected to ORACLE using OCI_7 API
[Thr 3780] *** ERROR => ORA-1403 when accessing table SAPUSER [dbsloci.c 7803]
[Thr 3780] Disconnecting from connection 0 ...
[Thr 3780] -->oci_logoff(con_hdl=0)
[Thr 3780] Now I'm disconnected from ORACLE
[Thr 3780] Try to connect with default password
[Thr 3780] Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
[Thr 3780] -->oci_logon(con_hdl=0, user='SAPDEV', dbname='DEV')
[Thr 3780] Now I'm connected to ORACLE using OCI_7 API
[Thr 3780] Database instance dev is running on CNSH10SDEV with ORACLE version 10.2.0.2.0 since 20061023
[Thr 3780] License index MLICHECK0 not found( - ok)
[Thr 3780] License index MLICHECK__0 not found( - ok)
[Thr 3780] License index MLICHECK~I1 not found( - ok)
[Thr 3780] Old license index not dropped...(rc: -111)
[Thr 3780] Database vendor is ORACLE
[Thr 3780] *** ERROR => ORA-959 occurred; SQL statement is ==> [dbsloci.c 5821]
[Thr 3780] CREATE TABLE MLICHECK (SYSTEMNAME varchar2(3) NOT NULL, CUSTOMERKEY varchar2(11) NOT NULL,\
[Thr 3780] PRODUCTID varchar2(20) NOT NULL, CUSTOMERINST varchar2(10) NOT NULL, USERLIMIT numbe\
[Thr 3780] r(10) NOT NULL, CREATION_DATE varchar2(8) NOT NULL, EXPIRATION_DATE varchar2(8) NOT NULL, LCHE\
[Thr 3780] CK_DATE varchar2(8) NOT NULL, LKEY varchar2(24) NOT NULL, FPRINT varchar2(2\
[Thr 3780] 4) NOT NULL) STORAGE(initial 16K next 16K pctincrease 0) tablespace PSAPDDICD ;
[Thr 3780] *** ERROR => DBSL statement where error happend:
CREATE TABLE MLICHECK (SYSTEMNAME varchar2(3) NOT NULL, CUSTOMERKEY varchar2(11) NOT NULL, PRODUCTID varchar2(20) NOT NULL, CUSTOMERINST varchar2(10) NOT NULL, USERLIMIT number(10) NOT NULL, CREATION_DATE varchar2(8) NOT NULL, EXPIRATION_DATE varchar2(8) NOT NULL, LCHECK_DATE varchar2(8) NOT NULL, LKEY varchar2(24) NOT NULL, FPRINT varchar2(24) NOT NULL) STORAGE(initial 16K next 16K pctincrease 0) tablespace PSAPDDICD [dbsloci.c 2220]
[Thr 3780]
[Thr 3780] * LOCATION CPIC (TCP/IP) on local host
[Thr 3780] * ERROR Creation of license table failed
[Thr 3780] *
TIME Tue Oct 24 13:46:10 2006
[Thr 3780] * RELEASE 46D
[Thr 3780] * COMPONENT SLIC
[Thr 3780] * VERSION 221
[Thr 3780] * RC 99
[Thr 3780] * MODULE slicdb.c
[Thr 3780] * LINE 879
[Thr 3780] * DETAIL DbSlExecute failed with return code 99
ORA-00959: tablespace 'PSAPDDICD' does not exist
[Thr 3780] * COUNTER 1
[Thr 3780] *
[Thr 3780] *****************************************************************************
[Thr 3780] *** ERROR => Failed to create license table (rc: -2) [slicfkt.c 342]
[Thr 3780] *** ERROR => Failed to create license table (rc: -2) [slicinst.c 218]
[Thr 3780] *** ERROR => SlicISapInstall: failed, rc -2 [slicinst.c 128]
[Thr 3780] Disconnecting from connection 0 ...
[Thr 3780] -->oci_logoff(con_hdl=0)
[Thr 3780] Now I'm disconnected from ORACLEHello Savo,
I finally make it by using the correct kernel disc which supports oracle 10g. I remove all the history work and did it again, and finally it's done.
During the new installation of CI and DBMIG, I chose the type 'New Tablespace Layout', and choose new database name and SAP System Name, but leaves the DBSCHEMA as SAPSR3,which is default.
Tks for you guys' valuable reply.
Rgds, Sam -
Error System Copy on cluster using R3load
Hi currently we are doing a system copy on Cluster using R3load
Source System win2003 SP2 32bit, MSSQl2000 SP4 32 bit
Target System win 2003 Sp2 64bit, MSSQL2005 SP2 X64 Server
We have successfully installed MSSQL2005 Sp2 64 bit
We have successfully installed Central Instance
When we are trying to install the database Instance using R3load dump
We are getting the fallowing error
ERROR 2008-09-07 20:55:14
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
Please help me out to resolve this issue
Thanx
Jarish
Entire log
INFO 2008-09-07 20:26:00
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2008-09-07 20:26:00
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2008-09-07 20:26:00
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\q0w9e9r8t7.1.xml.
INFO 2008-09-07 20:26:01
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/keydb.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/keydb.1.xml.
INFO 2008-09-07 20:26:01
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/keydb.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/keydb.1.xml.
INFO 2008-09-07 20:26:01
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\keydb.1.xml.
INFO 2008-09-07 20:26:01
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\change.log.
INFO 2008-09-07 20:26:01
Output of change user /install is written to the logfile change.log.
WARNING 2008-09-07 20:26:01
Execution of the command "change user /install" finished with return code 1. Output:
Install mode does not apply to a Terminal server configured for remote administration.
INFO 2008-09-07 20:26:01
File not found: [C:/DOCUME1/ADMINI1.SBA/LOCALS~1/Temp/2/sapinst_exe.1064.1220804594/msvcp71.dll].
INFO 2008-09-07 20:26:01
File not found: [C:/DOCUME1/ADMINI1.SBA/LOCALS~1/Temp/2/sapinst_exe.1064.1220804594/msvcr71.dll].
INFO 2008-09-07 20:26:01
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'SBA\Administrator' on host '.'.
INFO 2008-09-07 20:26:01
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\summary.html.
PHASE 2008-09-07 20:26:01
Prepare the installation program.
INFO 2008-09-07 20:26:03
Installation start: Sunday, 07 September 2008, 20:26:00; installation directory: C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB; product to be installed: SAP R3E 4.7 Extension Set 2 SR1> ABAP System> MS SQL Server> Non-Unicode> Database Instance Installation
INFO 2008-09-07 20:26:38
Host operation t_HostInfo_SHARED processed successfully.
INFO 2008-09-07 20:28:26
The 'saploc' share exists in directory 'S:/usr/sap'. Choosing drive S: as the SAP system drive.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/mssversions.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/mssversions.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mssversions.xml.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/db_all.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/db_all.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\db_all.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/db_di_clust.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/db_di_clust.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\db_di_clust.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/db_std_checks.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/db_std_checks.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\db_std_checks.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_get_defpath.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_get_defpath.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_get_defpath.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_get_r3db_config.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_get_r3db_config.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_get_r3db_config.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_init_jc.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_init_jc.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_init_jc.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_r3db_gconf.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_r3db_gconf.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_r3db_gconf.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_r3db_lconf.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_r3db_lconf.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_r3db_lconf.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_r3srv_conf.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_r3srv_conf.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_r3srv_conf.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_schema_cnv.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_schema_cnv.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_schema_cnv.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_sps_droptmp.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_sps_droptmp.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_sps_droptmp.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_users_sid_drop.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_users_sid_drop.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_users_sid_drop.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_users_sid_drop_objs.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/mss_users_sid_drop_objs.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mss_users_sid_drop_objs.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/srvchk.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/srvchk.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\srvchk.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/usrabap.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/usrabap.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\usrabap.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/usrstd.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL/usrstd.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\usrstd.sql.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/db_all.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/db_all.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/db_std_checks.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/db_std_checks.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/mss_r3db_gconf.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/mss_r3db_gconf.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/usrabap.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/usrabap.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/usrstd.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:29:17
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/SQL9/usrstd.sql to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO[E] 2008-09-07 20:30:00
Account group="ORA_PRD_DBA" does not exist.
INFO[E] 2008-09-07 20:30:00
Account group="ORA_PRD_OPER" does not exist.
INFO[E] 2008-09-07 20:30:00
Account group="SBA\dbprdctl" does not exist.
INFO 2008-09-07 20:48:16
Copying file E:/Export_PRD/DB/MSS/DBSIZE.XML to: DBSIZE.XML.
INFO 2008-09-07 20:48:16
Copying file E:/Export_PRD/DB/MSS/DBSIZE.XML to: DBSIZE.XML.
INFO 2008-09-07 20:48:16
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\DBSIZE.XML.
INFO 2008-09-07 20:50:58
Package table created
INFO 2008-09-07 20:50:58
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/mssprocs620.dat to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:50:58
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/mssprocs620.dat to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:50:58
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mssprocs620.dat.
INFO 2008-09-07 20:50:58
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/mssprocs620BW.dat to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:50:58
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/mssprocs620BW.dat to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:50:58
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mssprocs620BW.dat.
INFO 2008-09-07 20:50:58
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/mssprocs640.dat to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:50:58
Copying file E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08/IM_WINDOWS_X86_64/SAPINST/NT/COMMON/MSS/mssprocs640.dat to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB.
INFO 2008-09-07 20:50:58
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mssprocs640.dat.
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/summary.html to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/summary.1.html.
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/summary.html to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/summary.1.html.
INFO 2008-09-07 20:53:12
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\summary.1.html.
PHASE 2008-09-07 20:53:12
SAP Web Application Server
PHASE 2008-09-07 20:53:12
Request common parameters of SAP system
PHASE 2008-09-07 20:53:12
Collecting information on database configuration
PHASE 2008-09-07 20:53:12
Collecting information on database configuration
PHASE 2008-09-07 20:53:12
Create accounts
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/product.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/product.1.xml.
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/product.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/product.1.xml.
INFO 2008-09-07 20:53:12
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\product.1.xml.
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/product.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/product.2.xml.
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/product.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/product.2.xml.
INFO 2008-09-07 20:53:12
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\product.2.xml.
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/mssversions.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/mssversions.1.xml.
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/mssversions.xml to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/mssversions.1.xml.
INFO 2008-09-07 20:53:12
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\mssversions.1.xml.
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/DBSIZE.XML to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/DBSIZE.1.XML.
INFO 2008-09-07 20:53:12
Copying file C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/DBSIZE.XML to: C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/DBSIZE.1.XML.
INFO 2008-09-07 20:53:12
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\DBSIZE.1.XML.
WARNING 2008-09-07 20:53:25
Existing account SAPMssXPUser has the primary group None, not Administrators. Changing primary group.
PHASE 2008-09-07 20:53:25
Preparing OS account for MCOD installation
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
PHASE 2008-09-07 20:53:25
Request operating system user information
INFO 2008-09-07 20:53:26
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-2140900914-1967063802-3263448767-500' on host 'QASECC1'.
INFO 2008-09-07 20:53:26
Successfully added privileges 'SeServiceLogonRight SeNetworkLogonRight SeDenyInteractiveLogonRight SeDenyRemoteInteractiveLogonRight' to account 'SBA\SAPServicePRD' on host 'QASECC1'.
INFO 2008-09-07 20:53:26
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'SBA\prdadm' on host 'QASECC1'.
INFO 2008-09-07 20:53:26
All 'tNT_RegistryEntries' table rows evaluated.
PHASE 2008-09-07 20:53:27
Preparing DBMS-specific environment variables
INFO 2008-09-07 20:53:27
Switched to user: prdadm.
INFO 2008-09-07 20:53:27
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-09-07 20:53:27
Switched to user: prdadm.
INFO 2008-09-07 20:53:27
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-09-07 20:53:28
Switched to user: prdadm.
INFO 2008-09-07 20:53:28
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-09-07 20:53:28
Switched to user: prdadm.
INFO 2008-09-07 20:53:28
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-09-07 20:53:28
Switched to user: prdadm.
INFO 2008-09-07 20:53:28
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-09-07 20:53:28
Switched to user: prdadm.
INFO 2008-09-07 20:53:28
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-09-07 20:53:29
Switched to user: prdadm.
INFO 2008-09-07 20:53:29
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-09-07 20:53:29
Switched to user: prdadm.
INFO 2008-09-07 20:53:29
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-09-07 20:53:29
Switched to user: prdadm.
INFO 2008-09-07 20:53:29
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
PHASE 2008-09-07 20:53:29
Adapt file system
PHASE 2008-09-07 20:53:29
Prepare check/adapt SAP instance file system
INFO 2008-09-07 20:53:30
File system node S:\usr\sap exists.
INFO 2008-09-07 20:53:30
All file system node operations of table t_SAPComponent_Filesystem_Action_SHARED processed successfully.
INFO 2008-09-07 20:53:30
File system node S:\usr\sap/PRD exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node S:\usr\sap/tmp exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/tmp exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/EPS exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/EPS/in exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/EPS/out exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/EPS/log exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/bin exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/buffer exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/cofiles exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/data exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/etc exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/log exists already. Nothing to do.
INFO 2008-09-07 20:53:30
File system node
DEVECC64\sapmnt\trans/sapnames exists already. Nothing to do.
INFO 2008-09-07 20:53:30
All file system node operations of table t_SAPComponent_Filesystem_Action_SHARED processed successfully.
INFO 2008-09-07 20:53:30
All file system node operations of table t_SAPComponent_Filesystem_Action_SHARED processed successfully.
INFO 2008-09-07 20:53:31
All NT shares while processing the table 'tNT_SHARE' created successfully.
PHASE 2008-09-07 20:53:31
Extract archives
INFO 2008-09-07 20:53:31
All file system node operations of table t_SAPComponent_Archives_FORMS_SHARED processed successfully.
PHASE 2008-09-07 20:53:31
Extract SAP System kernel archives
INFO 2008-09-07 20:53:32
Copying file S:/usr/sap/PRD/SYS/exe/run/rfcexec.sec to: /rfcexec.sec.
INFO 2008-09-07 20:53:32
Copying file S:/usr/sap/PRD/SYS/exe/run/rfcexec.sec to: /rfcexec.sec.
INFO 2008-09-07 20:53:32
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB\SAPMMC.SAR.log.
INFO 2008-09-07 20:53:33
C:/DOCUME1/ADMINI1.SBA/LOCALS~1/Temp/2/sapinst_exe.1064.1220804594\sapcar.exe -xvgf E:/4.7_200Ext/51033746_15_Inst_Master/Installation_Master_6.20_6.40_05_08\IM_WINDOWS_X86_64/SAPINST/NT/AMD64/MMC/SAPMMC.SAR, -R C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\MSS\NUC\DB succeeded. (See output in './SAPMMC.SAR.log'.)
INFO 2008-09-07 20:53:33
While copying node C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/sapmmc.dll to C:/WINDOWS/system32/sapmmc.dll, source is not newer than the target. Nothing to do.
INFO 2008-09-07 20:53:33
While copying node C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/sapmmcada.dll to C:/WINDOWS/system32/sapmmcada.dll, source is not newer than the target. Nothing to do.
INFO 2008-09-07 20:53:33
While copying node C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/sapmmcdb6.dll to C:/WINDOWS/system32/sapmmcdb6.dll, source is not newer than the target. Nothing to do.
INFO 2008-09-07 20:53:33
While copying node C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/sapmmcinf.dll to C:/WINDOWS/system32/sapmmcinf.dll, source is not newer than the target. Nothing to do.
INFO 2008-09-07 20:53:33
While copying node C:/Program Files/sapinst_instdir/R3E47X2/SYSTEM/ABAP/MSS/NUC/DB/sapmmcms.dll to C:/WINDOWS/system32/sapmmcms.dll, source is not newer than the target. Nothing to do.
INFO 2008-09-07 20:53:33
All file system node operations of table t_SAPComponent_Archives_Copy_SHARED processed successfully.
INFO 2008-09-07 20:53:33
Removing file S:\usr\sap\PRD\SYS\exe\run\strdbs.cmd.
INFO 2008-09-07 20:53:33
Creating file S:\usr\sap\PRD\SYS\exe\run\strdbs.cmd.
INFO 2008-09-07 20:53:34
All 'tNT_RegistryEntries' table rows evaluated.
INFO 2008-09-07 20:53:34
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
PHASE 2008-09-07 20:53:34
Creating service ports
PHASE 2008-09-07 20:53:35
Generate instance profiles
PHASE 2008-09-07 20:53:35
Create versions of default profile, instance profile and start profile
INFO 2008-09-07 20:53:35
All file system node operations of table t_SAPComponent_Profiles_FORMS_SHARED processed successfully.
PHASE 2008-09-07 20:53:35
Preparing DBMS-specific profile parameters
INFO 2008-09-07 20:53:35
Adapt operation t_SAPComponent_Profiles_SHARED processed successfully.
PHASE 2008-09-07 20:53:35
Setting up database server
ERROR 2008-09-07 20:53:36
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
ERROR 2008-09-07 20:55:14
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.Hi,
I think some of the Microsoft runtime DLLs are missing, which you can observe in the above pasted log :-
INFO 2008-09-07 20:26:01
File not found: C:/DOCUME1/ADMINI1.SBA/LOCALS~1/Temp/2/sapinst_exe.1064.1220804594/msvcp71.dll.
INFO 2008-09-07 20:26:01
File not found: C:/DOCUME1/ADMINI1.SBA/LOCALS~1/Temp/2/sapinst_exe.1064.1220804594/msvcr71.dll.
Do have a look at snote Note 684106 - Microsoft runtime DLLs to drill more in to the issue.
Rgds
Radhakrishna D S -
Error during sybase system copy EHP7 on linux
Hi Supports,
I am using sybase database on linux.on this system i have already TOW sap system running. now i want to create new SID with my production database backup. backup is .dmp which is sybase backup EHP7.
I planed system copy for this activity but i stuck on step "setup database server software" with some error.
i am copying last lines of my sapinst_dev.log files here
and also refer the attached screen for exact error..
kindly waiting for your warm help.
ibssrv02:/tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP # tail -100 sapinst_dev.log
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file /tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP/SYBASE_SAP.lic.
TRACE 2014-03-12 15:45:53.981
syb_install_ase_software: sybase installer rc 255
ERROR 2014-03-12 15:45:53.981 [iaxxinscbk.cpp:224]
CJS-00030 Assertion failed: Unable to install the database software. Refer to trace file sapinst_dev.log for further information.
TRACE 2014-03-12 15:45:53.982 [EJSController.cpp:351]
EJS_ControllerImpl::getExtension(EJS::Exception)
unqualified name is Exception
TRACE 2014-03-12 15:45:53.982 [JSExtension.hpp:128]
JSExceptionHandler::setJSException()
Member function 'Installer.abortInstallation()' has thrown ESAPinstException. Converting to JavaScript exception EJS::Exception.
TRACE 2014-03-12 15:45:53.982
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2014-03-12 15:45:53.983
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in module call: .
TRACE 2014-03-12 15:45:53.983 [JSExtension.hpp:879]
CallFunctionBase::call()
Member function 'Installer.invokeModuleCall() has thrown unknown exception. Rethrowing.
TRACE 2014-03-12 15:45:54.211 [syuxctask.cpp:237]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 5807
TRACE 2014-03-12 15:45:54.243 [syuxctask.cpp:600]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 5807 returned 0
TRACE 2014-03-12 15:45:54.278 [syuxctask.cpp:237]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 5808
TRACE 2014-03-12 15:45:54.309 [syuxctask.cpp:600]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 5808 returned 0
ERROR 2014-03-12 15:45:54.318 [sixxcstepexecute.cpp:901]
FCO-00011 The step syb_step_install_database_software with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_SYB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_install_database_software was executed with status ERROR ( Last error reported by the step: Assertion failed: Unable to install the database software. Refer to trace file sapinst_dev.log for further information.).
TRACE 2014-03-12 15:45:54.363 [kdxxctaco.cpp:100]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2014-03-12 15:45:55.836 [kdxxctaco.cpp:129]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
after creating out stream for /tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP/statistic.xml
TRACE 2014-03-12 15:45:55.901 [kdxxctaco.cpp:163]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO 2014-03-12 15:45:55.911 [syuxcpath.cpp:447]
CSyPath::createFile() lib=syslib module=syslib
Creating file /tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP/__instana_tmp.xml.
TRACE 2014-03-12 15:45:55.927 [syuxctask.cpp:237]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 5809
TRACE 2014-03-12 15:45:55.957 [syuxctask.cpp:600]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 5809 returned 0
TRACE 2014-03-12 15:45:55.992 [syuxctask.cpp:237]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 5810
TRACE 2014-03-12 15:45:56.24 [syuxctask.cpp:600]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 5810 returned 0
TRACE 2014-03-12 15:45:59.600
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2014-03-12 15:46:09.284 [iaxxgenimp.cpp:660]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option <i>SAP Business Suite 7i 2013 > EHP7 for SAP ERP 6.0 ABAP > SAP Sybase ASE > System Copy > Target System > Standard System > Based on AS ABAP > Standard System( Last error reported by the step: Assertion failed: Unable to install the database software. Refer to trace file sapinst_dev.log for further information.)</i>. You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>Log Files</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to <code>/tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP/</code>. </p> </body></html>
TRACE 2014-03-12 15:46:09.290 [iaxxgenimp.cpp:1137]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUIHi Deepak,
I have seen relevant sap note.do you help me how i can see cache memory??
because my other SID sybase GUI is not opening due to The variable $SYBROOT is not set to a valid directory whicch is on same zone(system).
Is this matter if environmental variable not set even though my xclock is working??
thnks for support,
Aziz.
Maybe you are looking for
-
Send Existing Sales Orders to another system
hi experts!! I have a requirement to move all existing sales orders from one system to another. Please provide some hints on usage of IDOC_OUTPUT_ORDERS 1. we have to file NAST mandatory fields only or what else we need to code for complete generatio
-
Can't print from MAC on network
HP PSC 1410 connected to a Lenovo running Windows Vista. Printer is shared on the network. Print job from MAC gets into print queue on Vista machine. Status goes from Spooling to Printing but then goes to Error - Printing. Can print from other Wi
-
Hi i am facing problem with safari 5.0.5 when i open it crash down and these lines
Process: Safari [378] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.0.5 (6533.21.1) Build Info: WebBrowser-75332101~6 Code Type: X86-64 (Native) Parent Process:
-
Host Builtin Not Working in Linux
I'm trying to convert a file using the linux command dos2unix through forms HOST builtin. I've set the path variable in the environment file to /usr/bin, where the dos2unix command resides. I've had no luck converting this file. I've also tried: host
-
OSX Mail only downloads 1 message at a time
For some reason, recently, Mail has started downloading only 1 email at a time. If I've been away from the computer, I have to keep hitting get mail over and over for each email to be downloaded into my box. I have other email accounts in Mail that