System copy:integration models altered
Hi SCM experts,
We have APO 4.1 connected to ECC system.Recently the QAS data is refreshed with PRD data and after that all CIF integration model variants in QAS are pointing to PRD system. There are more than 100 integration model variants and changing the logical system mnaualy to QAS client is taking long time.
Is there any standrad report or t.code by means of which we can do a mass maintenance of these integration model variants ?
Hi deeparai,
You can change the name of logical system in ECC table CIF_IMOD. However, the integration models will not become active unless you generate them again (CFM1/2/3).
Hope this helps in reducing manual work.
regards,
biplab
Similar Messages
-
Destination system cannot be used for classic qRFC by activating integration models
Hi All,
I am trying to connect ECC Release 702 to SAP TM 8.0 but by activating integration models(CFM2) i got following runtime error:
Error analysis
Short text of error message:
Destination TMCLNT100 cannot be used for classic qRFC
Long text of error message:
Technical information about the message:
Message class....... "SR"
Number.............. 320
Variable 1.......... "TMCLNT100"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
any one has idea how to solve that?
Thanks a lot!
Kind regards
RWRW,
I am definitely not an expert on SAP Transportation Management. However, maybe your destination system has been set up as bgRFC instead of qRFC?
bgRFC (Background Remote Function Call) - Connectivity - SAP Library
Best Regards,
DB49 -
Update integration directory and repository content after PI system copy
We are on PI 7.1, We are trying to figure out the best way to update the contents in sld, integration directory and repository after system copy. currently we delete everything in sld, ID and IR then reimport all the content to get everything in-sync. Is there an easier way to do it, ex. just update the system in sld and the matching contents in IB and IR?
Thanks,
Jane ZhouHi Jane
This completely depends on the nature of the system copy and your SLD architecture and operational requirements
Will the source system remain available or operational ?
Is the target SLD proposing to use satellite systems already defined in the source SLD ?
When doing a system copy the following should be considered
1) If you create an import line from a previous SLD via export or sync
- that SLD has to continue to be available for further updates or sync
2) If you create a system copy, any target specific configuration like hostname, port, SID
may needed to be adapted in target landscape
3) Further considerations are needed if 1 satellite will point to 2 SLDs at the same time both for operational use
Its very easy to take a back-up or full or partial import from one SLD and put it into another or indeed sync between SLDs
however the key is to ensure the target SLD content is consistent and useable in the same way as the source SLD
Hope this helps
Stuart -
System Copy SAP NetWeaver Process Integration 7.1 documentation incorrect
I am trying to a Homogeneous System Copy on PI 7.1 SP07. I don't want to do a
Copying the Primary Application Server Instance Only
Because (as the documentation says) "As of SAP NetWeaver based on kernel 7.1, you can copy a primary application server instance only. With this procedure you can move a primary application server instance to a different host within your system."
I don't want to move my system to another system. I just want to do a Database refresh. That option is not available when I run SAPINST.
I see the option for database refresh in the manual, but it's not a sapinst selection
6.3Copying the Database Only u2013 Refresh
With this procedure you can refresh the content of an existing database without having to copy the primary application server instance and to reinstall additional applications servers.
I'm using the latest SAPINST and I have the correct DVD from Service Marketplace.
This database refresh option appears in both the "distributed system" selection under system copy --> target --> distribute system.
"SAP NetWeaver Process Integration -> Software Life-Cycle Options --> System Copy --> Target System --> Distributed System --> Based on AS ABAP and AS Java --> Database Refresh or Move".
Is that the correct choice? Why is the documentation wrong?
"SAP NetWeaver Process Integration 7.1 including Enhancement Package" and "System Copy for SAP NetWeaver Process Integration 7.1". So it must be correct (I think).
I do see the database refresh option under the "Thanks for the reply. So I would do this:
"Copying the Primary Application Server Instance Only
Because (as the documentation says) "As of SAP NetWeaver based on kernel 7.1, you can copy a primary application server instance only. With this procedure you can move a primary application server instance to a different host within your system."
and then do the "database refresh" option under "distributed systems"?
Is that correct? -
Hi Supports,
I am using sapinst homogeneous system copy in Linux on sybase.
I stuck on the the step 27/49 "create Database".
I checked Firewall is off.
i got points in my sapinst_dev.log that "
1)The log segment in the target database 'SID' is too small (9216 MB) to accommodate the log segment from the dumped database (10240 MB)"
and
2)"Can't change the owner of the master, model, tempdb or sybsystemprocs database"
Do i need to increase "sybase/SID/saplog_1" ? because my "saplog_1" is 49 mb now.
if it is ! how do i increase in this stage.
can any one know about this error???
Thanks,
Aziz.Hi,
When i seen SID.log file so its showing deadlock and checkpoint occurring,
Is any solution ???
Is this because of networks?
we had 2 servers on this same IP. but i stopped one server and one is still running.
please find my SID.log file and revert back if any soltion.
==========================================================
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.03.21 12:12:31 =~=~=~=~=~=~=~=~=~=~=~=
ibssrv02:/sybase/IB1/ASE-15_0/install #
ibssrv02:/sybase/IB1/ASE-15_0/install # lscd ASE-15_0/install/lscd IB1lscd /IB1sybase/df -hexitsu - sybib1lscd IB1ls
IB1.log IB1_BS.log IB1_JSAGENT.log RUN_IB1 RUN_IB1_BS auditinit setperm_all showserver startserver sybhauser veritas
ibssrv02:/sybase/IB1/ASE-15_0/install # more IB1.log
00:0000:00000:00000:2014/03/21 11:03:36.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Performing space allocation for device '/sybase/IB1/sybsystem/master.dat' (0.39 Gb). This may take some time.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Finished initialization.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:38.32 server Configuration Error: Configuration file, '/sybase/IB1/IB1.cfg', does not exist.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: A configuration file was not specified or the default file '/sybase/IB1/IB1.cfg' does not exist. ASE creates
the default file.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: Using default file '/sybase/IB1/IB1.cfg' since a configuration file was not specified. Specify a configurati
on file name in the RUNSERVER file to avoid this message.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Unpublished rights reserved under U.S. c 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1718]: executing SQL statement ("update master.dbo.sysusages set loc..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1731]: executing SQL statement ("begin declare @val int select @val=..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model' does not exist. ASE will create it.
--More--(11%)
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model': beginning upgrade step [ID 1]: Initialize disk and create empty allocation units on master devi
ce.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID 2]: Bootstrap basic system catalogs in database.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID 6]: creating index (table syspartitions, index ncsyspartitions)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 8]: creating index (table systypes, index ncsystypes)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 10]: creating index (table sysobjects, index ncsysobjects)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 13]: creating table (table systabstats)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 26]: creating table (table sysprocedures)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 27]: creating table (table syscomments)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 28]: creating table (table syssegments)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 29]: creating table (table sysprotects)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 30]: creating table (table sysusers)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 31]: creating table (table sysalternates)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 32]: creating table (table sysdepends)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 33]: creating table (table syskeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 47]: creating table (table syspartitionkeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 51]: creating table (table sysreferences)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 52]: creating table (table sysconstraints)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 53]: creating table (table sysusermessages)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 54]: creating table (table systhresholds)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 55]: creating table (table sysroles)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 56]: creating table (table sysslices)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 60]: creating table (table sysstatistics)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 61]: creating table (table sysxtypes)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 62]: creating table (table sysjars)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 65]: creating table (table sysqueryplans)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 68]: creating table (table sysencryptkeys)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 73]: executing SQL statement ("update sysobjects set sysstat = sys...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 74]: executing SQL statement ("update syscolumns set type=66, user...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 80]: creating table (table sysattributes)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID 82]: creating table (table sysdams)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID 90]: insert basic data into bootstrap system tables
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 91]: executing SQL statement ("update systypes set length=@@maxpag...
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 245]: Update system roles in system tables.
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 248]: update system catalog protection data
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 606]: executing SQL statement ("select lct_admin('lastchance', db_i...
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1126]: Initialize systabstats with valid statistics
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1131]: Creating/Updating the last chance threshold for logsegment.
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1274]: executing SQL statement ("declare @dummy int")
--More--(13%)
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1241]: executing SQL statement ("insert into sysattributes (class, a...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1400]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1411]: executing SQL statement ("if not exists (select 1 from master...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1416]: executing SQL statement ("update sysroles set id=11 from sysu...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1502]: executing SQL statement ("if exists (select 1 from sysobjects...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1503]: executing SQL statement ("create view sysquerymetrics (uid, g...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1505]: executing SQL statement ("update sysattributes set char_value...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1550]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1554]: upgrade simulated statistics
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1564]: executing SQL statement ("declare @dbid int select @dbid = db...
00:0006:00000:00001:2014/03/21 11:03:39.93 server Database 'model': beginning upgrade step [ID 1650]: executing SQL statement ("dbcc upgd_grantrev_sysrole_perms('g...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1651]: updating builtin permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1652]: adding generic user 'usedb_user' to sysusers
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1653]: updating DBCC command permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server CREATE DATABASE: allocating 1536 logical pages (24.0 megabytes) on disk 'master' (1536 logical pages requested).
00:0006:00000:00001:2014/03/21 11:03:39.97 server Warning: The database 'sybsystemdb' is using an unsafe virtual device 'master'. The recovery of this database can not
be guaranteed.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x000013b4).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database sybsystemdb successfully created.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb', checkpoint=(864, 64), first=(864, 64), last=(864, 150).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 86.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Redo pass of recovery has processed 2 committed and 0 aborted transactions.
--More--(15%)
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x00001416).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Boot Count: 1
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Now loading ASE's new default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
--More--(17%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
--More--(18%)
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
--More--(20%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
--More--(21%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdatabases' (object ID 30): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdatabases_30' (partition ID 30) of table 'sysdatabases'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syslogins' (object ID 33): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syslogins_33' (partition ID 33) of table 'syslogins'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdevices' (object ID 35): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdevices_35' (partition ID 35) of table 'sysdevices'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysconfigures' (object ID 37): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysconfigures_37' (partition ID 37) of table 'sysconfigures'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysservers' (object ID 40): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysservers_40' (partition ID 40) of table 'sysservers'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysremotelogins' (object ID 41): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysremotelogins_41' (partition ID 41) of table 'sysremotelogins'. The logical page size of this t
able is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
--More--(23%)
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syscharsets' (object ID 45): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syscharsets_45' (partition ID 45) of table 'syscharsets'. The logical page size of this table is
16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysresourcelimits' (object ID 52): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysresourcelimits_52' (partition ID 52) of table 'sysresourcelimits'. The logical page size of th
is table is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Default Sort Order successfully changed.
00:0006:00000:00001:2014/03/21 11:03:40.01 server ASE shutdown after verifying System Indexes.
00:0006:00000:00001:2014/03/21 11:03:40.01 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:03:40.01 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.06 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.21 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:40.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Unpublished rights reserved under U.S. copyright laws.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel This software contains confidential and trade secret information of Sybase,
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Inc. Use, duplication or disclosure of the software and documentation by
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel the U.S. Government is subject to restrictions set forth in a license
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement between the Government and Sybase, Inc. or other written
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement specifying the Government's rights to use the software and any
--More--(24%)
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel applicable FAR provisions, for example, FAR 52.227-19.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using /sybase/IB1 as the 'SYBASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using ASE-15_0 as the 'SYBASE_ASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted on host 'ibssrv02' running Linux release 3.0.13-0.27-default version #1 SMP Wed Feb 15 13:33:49 UTC 2012 (
d73692b).
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using '/sybase/IB1/ASE-15_0/IB1.cfg' for configuration information.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Logging ASE messages in file '/sybase/IB1/ASE-15_0/install/IB1.log'.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Disk Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Ct-Lib Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Platform TCP network support seems IPv4-only.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted with TCP_NODELAY enabled.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network and device connection limit is 4081.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is running as process id 25438.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Number of blocks left for proc headers: 6920.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for each per engine cache.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for engine 0 local cache
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Using value of 'number of engines at startup' (1) for size of syb_default_pool.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 3, "syb_blocking_pool", type="Run To Completion", with 4 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 2, "syb_system_pool", type="Run To Completion", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 1, "syb_default_pool", type="Engine (Multiplexed)", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Aggressive task stealing enabled
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
00:0007:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 2 (NetController) is running as task 1127909376 on thread 7 (LWP 25453).
00:0008:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 3 (DiskController) is running as task 1127910096 on thread 8 (LWP 25454).
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Initializing virtual device 0, '/sybase/IB1/sybsystem/master.dat' with dsync 'off'.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Virtual device 0 started using asynchronous i/o.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Loaded default Unilib conversion handle.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Worker Thread Manager is not enabled for use in ASE.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mec
hanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel libsybibmmq - Sybase IBM MQ interface/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/OPT
/Thu Jun 6 12:02:54 2013
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Loaded encryption provider CSI-2.8M2-linuxamd64-2012/12/27 21:15:59 PST-sybcsi_openssl-OpenSSL 1.0.1b 26 Apr 2012.
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Encryption provider initialization succeeded on engine 0.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel SSL Plus v5.2.2 security modules loaded successfully.
--More--(26%)
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Network and device connection limit is 4081.
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Thread 6 (LWP 25447) of Threadpool syb_default_pool online as engine 0
00:0006:00000:00000:2014/03/21 11:03:41.28 server Active traceflags: 1623
00:0006:00000:00001:2014/03/21 11:03:41.28 kernel libomni1 - Component Integration Services: using 'Sybase Client-Library/15.7/P-EBF21002 SP100/DRV.15.7.0.10/Linux x86
_64/Linux 2.6.18-128.el5 x86_64 Native Threads/BUILD1570-026/64bit/OPT/Wed Mar 20 21:34:36 2013'
00:0006:00000:00001:2014/03/21 11:03:41.28 server Size of the 16K memory pool: 8192 Kb
00:0006:00000:00001:2014/03/21 11:03:41.28 server Opening Master Database ...
00:0006:00000:00001:2014/03/21 11:03:41.29 server Loading ASE's default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:41.29 server Recovering database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Database 'master', checkpoint=(1634, 132), first=(1634, 132), last=(1634, 173).
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database master.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started REDO pass for database 'master'. The total number of log records to process is 42.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Redo pass of recovery has processed 7 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed REDO pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Timestamp for database 'master' is (0x0000, 0x00006ec9).
00:0006:00000:00001:2014/03/21 11:03:41.30 server Recovery of database 'master' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Database 'master' is now online.
00:0006:00000:00001:2014/03/21 11:03:41.30 server The transaction log in the database 'master' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:41.37 server server is unnamed
00:0006:00000:00001:2014/03/21 11:03:42.06 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.001'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb', checkpoint=(864, 170), first=(864, 170), last=(864, 170).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:40.01 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'sybsystemdb' is (0x0000, 0x0000142f).
--More--(28%)
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Boot Count: 2
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.07 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Resident Node id: fb18efb51d00
00:0006:00000:00001:2014/03/21 11:03:42.07 server Transaction coordinator initialized.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'model', checkpoint=(864, 59), first=(864, 59), last=(864, 77).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database model.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'model'. The total number of log records to process is 19.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'model' is (0x0000, 0x000013cb).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'model' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The transaction log in the database 'model' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server Database 'model' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The logical pagesize of the server is 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server 0 dump conditions detected at boot time
00:0006:00000:00001:2014/03/21 11:03:42.08 server Clearing temporary database 'tempdb'.
00:0006:00000:00001:2014/03/21 11:03:42.09 server Tempdb 2 is added to the list of local temporary databases
00:0006:00000:00001:2014/03/21 11:03:42.09 server Timestamp for database 'tempdb' is (0x0000, 0x000013ce).
00:0006:00000:00001:2014/03/21 11:03:42.10 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.10 server Database 'tempdb' is now online.
00:0006:00000:00009:2014/03/21 11:03:42.10 kernel network name ibssrv02, interface IPv4, address 192.168.2.6, type tcp, port 7905, filter NONE
00:0006:00000:00001:2014/03/21 11:03:42.10 server Recovery complete.
--More--(30%)
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default unicode sort order is 'binary'.
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default sort order is:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'bin_iso_1' (ID = 50)
00:0006:00000:00001:2014/03/21 11:03:42.10 server on top of default character set:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'iso_1' (ID = 1).
00:0006:00000:00001:2014/03/21 11:03:42.10 server Master device size: 400 megabytes, or 204800 virtual pages. (A virtual page is 2048 bytes.)
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Warning: Cannot set console to nonblocking mode, switching to blocking mode.
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Console logging is disabled. This is controlled via the 'enable console logging' configuration parameter.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Initializing virtual device 1, '/sybase/IB1/sybsystem/sysprocs.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Virtual device 1 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:03:55.01 server Timestamp for database 'sybsystemprocs' is (0x0000, 0x000013ce).
00:0006:00000:00015:2014/03/21 11:03:55.13 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.002'.
00:0006:00000:00015:2014/03/21 11:03:55.13 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:03:55.14 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.003'.
00:0006:00000:00015:2014/03/21 11:03:55.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.004'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:22.28 server Increase the config parameter 'number of open objects' to avoid descriptor reuse. Reuse may result in performance deg
radation.
00:0006:00000:00015:2014/03/21 11:04:24.34 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.005'.
00:0006:00000:00015:2014/03/21 11:04:24.34 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.006'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:24.89 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.007'.
00:0006:00000:00015:2014/03/21 11:04:24.90 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Initializing virtual device 2, '/sybase/IB1/sybsystem/sybsysdb.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Virtual device 2 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:04:24.95 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.008'.
00:0006:00000:00015:2014/03/21 11:04:24.95 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.009'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Initializing virtual device 3, '/sybase/IB1/sybtemp/tempdbdev.dat' with dsync 'off'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Virtual device 3 started using asynchronous i/o.
00:0006:00000:00018:2014/03/21 11:04:27.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.010'.
--More--(32%)
00:0006:00000:00018:2014/03/21 11:04:27.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.011'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.012'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.013'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00020:2014/03/21 11:04:29.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.014'.
00:0006:00000:00020:2014/03/21 11:04:29.17 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00020:2014/03/21 11:04:29.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.015'.
00:0006:00000:00020:2014/03/21 11:04:29.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.016'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.017'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.018'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.019'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00025:2014/03/21 11:04:35.24 server Shutdown started by user 'sa'. SQL text: shutdown
00:0006:00000:00025:2014/03/21 11:04:35.25 server ASE shutdown by request.
00:0006:00000:00025:2014/03/21 11:04:35.25 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:04:35.25 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.30 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.45 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:04:36.50 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE -
BDLS updating logical systems in CIF models?
Hi
The BDLS tool can be used to update logical system names in systems. As I understand this tool is often used when copying systems (Production system to Q system for instance).
In a situation where you copy the productive system to the Q system:
Does anyone know if BDLS is capable of updating the logical systems in the generated CIF models that you get copied from the productive system? In this case you'd get a big chunk of models that point to the wrong logical name. If you could get the target system changed in the generated model then you could save a lot of time in generating and activating models.
Any comments much appreciated
SimonHi,
I am not too sure if this thread is followed. I was looking for some info where we had a similar issue recently when we did a production refersh to Quality and all our integration model variants are pointing to our production system.
Our basis team has taken all the necessary steps like BDLS etc, but we had this issue. I dropped a message to SAP and they gave a report name RCIFVARIANTCHANGE to change the logical system name from old one to the new one for CIF variants.
Thanks,
Murali -
More than one CIF integration model possible for material?
Hi Gurus,
we want to have two different integration models (with non-overlapping selections) for materials to be able to have separate selections, but we cannot make it work.
When we create them the first time and then activate them, everything works fine: both models send their products to APO in the initial load. However, if there are changes in products in both models, when we generate and then activate one of the models, the changes in the other one are lost: the generation-activation of the second model does not send any product to APO even if there were any changes in the master data (and we see the ALE pointers as processed in the table)
Is there any workaround to solve this issue in a system without CIF pointers in BDCP2?? The ECC system is below the relevant releases and will not be upgraded in the near future.
We could not find any mention to an existing limitation on the number of models being one neither in OSS notes nor the help pages.
thanks a lot,
PabloPablo,
It is common to have multiple Integration Models for Materials.
I have never heard of transaction BDCP2. I also have never seen the problem you describe.
I usually prefer not to use change pointers at all for Master data, such as Materials. You can alter this behavior in CFC9, and instead use Business Transfer Events. This means that all fields that are relevant for 'change transfer' to SCM will move across almost immediately after saving the changed material master.
http://help.sap.com/saphelp_scm70/helpdata/EN/c8/cece3be9cd4432e10000000a11402f/frameset.htm
Also read the links contained in this page.
If you wish to actually perform a new 'initial load', then run the Integration model through program RIMODINI. It may be a lengthy run.
As always, check first in your Qual system before committing to production.
Best Regards,
DB49 -
PI 7.11 sp6 system copy causes target sys to register with source
Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I could not run the "wizard for post copy" since I'm on 7.11sp6. Yes, I know they "downported" it but I don't have those latest LMtools type packages. Anyway, I'm OK with that.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
RFC 399 unable to connect
I'm certain the user is NOT locked and the password is correct for PILDUSER.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
Also, now my PROD system shows the PIT system as a "non-central adapter engine".
Ughh! I'm totally stuck. I'm not sure what to do.
It's as if the PIT (PI training) system somehow is linked to PIP (PI prod). It's like PIT doesn't think he is his own box...
Any ideas? I'm resisting opening a message because this will be so hard to explain to sap support.
--NICKHi Nick,
We went thru the same issue. Fortunately, it was between Dev to sandbox. I stopped the dev system and changed the exchange profile parameters to sandbox hostname and brought the Dev up to fix the issue.
Prod showing as Non-Central Adapter engine :- Check your Business System in SLD and In CIM Instances in SLD, check your XI Integration server assigned to right Business System.
Note 764176 - Error in XI due to inconsistent SLD contents :- helped me come over PI post step issues.
Thanks,
Arjun -
PI 7.11 sp6 system copy Exchange Profile error code: 399
Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the copy itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
com.sap.rprof.dbprofiles.DBException: RFC call returned an error code: 399
I'm certain the user is NOT locked and the password is correct for PILDUSER. It'll give me a different error if I put the wrong password in, so I know it's hitting my system.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
I see these errors in the default trace and application log:
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND:
No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",
Name="PIT.SystemHome.<traininghostname>"
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="PIT.SystemHome.<traininghostname>"
at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
#2.#2011 11 03 13:49:47:008#0-500#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#7E3832DEA80F002B00000000008700C6#4804850000001902##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#J2EE_GUEST#0##0AFD01D4064C11E1CB5E7E3832DEA80F#0afd01d4064c11e1cb5e7e3832dea80f#0afd01d4064c11e1cb5e7e3832dea80f#0#Application [24]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
#2.#2011 11 03 14:51:18:096#0-500#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
#BC-ESI-WS-JAV#tcesiespsrv#7E3832DEA80F001100000000009A004C#4804850000001385##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####109F6812065511E1BF9C7E3832DEA80F#109f6812065511e1bf9c7e3832dea80f#109f6812065511e1bf9c7e3832dea80f#0#Service Runner [tcesiespsrv]#Plain##
+There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
SLDCHECK shows this:
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
I can't be the first person to run into this.
SO strange that I can actually plug in either my dev/QA or PROD hostname in the "ABAP connection" box and it WILL ACCEPT IT...but then, it registered my training system as a "non central adapter engine". I don't want that.
Any ideas?
Another issue is that the SLD PI information from the PIT system is missing the "Integration Directory". It has the other 5 entries...Adapter Engine, Domain, Integration Repository, Integration Server, RWB.
Thanks for reading this,
NICKHere is the error I get when I try to change the "abap connection" to the correct hostname:
RFC call returned an error code: 399
Stack Trace class com.sap.rprof.dbprofiles.DBException:<br><pre>at com.sap.rprof.dbprofiles.DBProfiles.checkReturn(DBProfiles.java:184) at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:105) at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1378) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:204) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfile(RemoteProfile.java:154) at com.sap.rprof.dbprofiles.ExchangeProfile.getExchangeProfile(ExchangeProfile.java:46) at com.sap.rprof.remoteProfile.webui.ProfileWebTree.<init>(ProfileWebTree.java:24) at com.sap.rprof.remoteProfile.webui.Edit.getWebTree(Edit.java:322) at JEE_jsp_treeexprof_4804850_1319481176000_1319565151782._jspService(JEE_jsp_treeexprof_4804850_1319481176000_1319565151782.java:59) at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:436) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:493) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:399) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:388) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:244) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428) at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247) at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327) </pre> -
Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA
Hi
I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
After, during the import in the target system I get the following error message:
vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66 finish processing of package SAP0000
You can see below the detail of the 5 packages in error:
SAPAPPL0_1_5
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
SAPZPSA
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
SAPDODS
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB
SAPDFACT
DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
(DB) ERROR: DDL statement failed
( ALTER TABLE "/BI0/F0TCT_C01" ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131 ) TABLESPACE "" )
DbSlExecute: rc = 99
(SQL error 1741)
error message returned by DbSl:
ORA-01741: illegal zero-length identifier
(DB) INFO: disconnected from DB
SAPZOSO
DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
(DB) ERROR: DDL statement failed
(CREATE TABLE "/BIC/B0000989000" ("REQUEST" VARCHAR2 (000090) DEFAULT ' ' NOT NULL, "DATAPAKID" VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "PART
NO" NUMBER (000010) DEFAULT 0 NOT NULL, "RECORD" NUMBER (000010) DEFAULT 0 NOT NULL, "PLANT" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "MATERIA
L" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "RPA_CURUOM" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RPA_MVF" NUMBER (000017, 000002) DEFAULT 0 NOT N
ULL, "PRICE_UNIT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RPA_QTYUOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_SSMFGR" VARCHAR2 (000024)
DEFAULT '00000000' NOT NULL, "BASE_UOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "FRE_PLNPUR" VARCHAR2 (000036) DEFAULT ' ' NOT NULL, "FRE_MINS
TK" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SERLEV" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SELCLS" VARCHAR2 (000003) DEFAULT '
0' NOT NULL, "FRE_REPLST" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "ABCKEY" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RECORDMODE" VARCHAR2 (000003)
DEFAULT ' ' NOT NULL, "RT_SERVLEV" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RT_SUPS" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "VAL_TYPE" VARCH
AR2 (000030) DEFAULT ' ' NOT NULL, "PUR_GROUP" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VPNEU" NUMBER (000017, 000002) DEFAULT 0 NOT NULL,
"CURRENCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VRKPE" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "DISMM" VARCHAR2 (000006) DEFAULT ' '
NOT NULL, "SALES_UNIT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VP_BT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_BT" NUMBER (000017,
000003) DEFAULT 0 NOT NULL, "RT_VP_NT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_NT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "R
T_VWAERBT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VWAERNT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VPMEIBT" VARCHAR2 (000009) DEFAULT '
' NOT NULL, "RT_VPMEINT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "LOC_CURRCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "UNIT" VARCHAR2 (000009)
DEFAULT ' ' NOT NULL, "CM_MCATDIV" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT1" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT2" VARCHAR2
(000054) DEFAULT ' ' NOT NULL, "CM_CDT3" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT4" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_HIEID"
VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "CPSTLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "CPSVLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL
, "STOCK_VAL" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "STOCK_QTY" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RT_SEASON" VARCHAR2 (000012)
DEFAULT ' ' NOT NULL, "RT_SEASYR" VARCHAR2 (000012) DEFAULT '0000' NOT NULL, "CALDAY" VARCHAR2 (000024) DEFAULT '00000000' NOT NULL, "CALWEEK"
VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "RF_BNDID" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "/BIC/ZCATTR3" VARCHAR2 (000006) DEFAULT ' ' NOT
NULL, "/BIC/ZCSTYLE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCIMAGE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCBRNDTYP" VARCHAR2 (000
003) DEFAULT ' ' NOT NULL, "/BIC/ZCGROUPE" VARCHAR2 (000054) DEFAULT ' ' NOT NULL) PCTFREE 10 PCTUSED 00 INITRANS 001 TABLESPACE STORAGE (
INITIAL 0000000016 K NEXT 0000001024 K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0000
FREELISTS 001 FREELIST GROUPS 01) PARTITION BY RANGE ("PARTNO") ( PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN (00000
00002) NOCOMPRESS ) )
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DBhello,
Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
let me know how it goes.
Regards,
Michael -
DB2 9.7 DFACT.SQL syntax error in Import ABAP phase - System Copy
Hi all. I'm trying a system copy with a source system SAP ECC 6.0 ehp4 based on NW 701 and db2 LUW 9.1 .
As it seems supported by SAP, i'm using db2 LUW 9.7 in target system.
O.S. is Windows 2008.
I got an error in phase "Import ABAP".
Sapinst.log says:
INFO 2010-02-18 10:12:14.337
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2010-02-18 10:12:14.509
Switched to user: devadm.
INFO 2010-02-18 10:12:14.572
Creating file C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\import_monitor.java.log.
INFO 2010-02-18 10:12:14.603
Switched to user: devadm.
INFO 2010-02-18 10:12:14.618
Working directory changed to C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP.
INFO 2010-02-18 10:12:14.618
Output of C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2010-02-18 10:12:44.790
Execution of the command "C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_24-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_24-rev-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_24-rev-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 73, failed 0, total 75.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 73, failed 1, total 75.
WARNING[E] 2010-02-18 10:12:44.790
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-02-18 10:12:44.790
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Looking into import_monitor.java.log i found that the problem is in dfact import.
I've looked into sapdfact.log and i found:
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100218105045
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Jan 28 2010 20:22:25
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
(DB) INFO: connected to DB
(DB6) INFO: COMPRESS YES is set during table creation.
(DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
(DB6) Compression threshold is ignored.
(GSI) INFO: dbname = "DEV "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SRVSAPDEV"
(GSI) INFO: release = "6.0"
(GSI) INFO: version = "6002 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 26 Step 5)"
(DB) ERROR: DDL statement failed with SQL error
( ALTER TABLE "/BI0/E0PPM_VC1" DROP PRIMARY KEY )
(SQL error -539)
error message returned by dsql:
SQL0539N Table or nickname "SAPDEV./BI0/E0PPM_VC1" does not have a "PRIMARY" key. SQLSTATE=42888
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB6) INFO: executing DDL statements for object /BI0/E0PPM_VC1 from external SQL file.
(DB) ERROR: DDL statement failed with SQL error
( CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1" ("KEY_0PPM_VC1T" , "KEY_0PPM_VC11" , "KEY_0PPM_VC1U" , "KEY_0PPM_VC1P" ) USING STOGROUP ___FAI PRIQTY 16 SECQTY 10240 FREEPAGE 0 PCTFREE 0 GBPCACHE CHANGED DEFINE NO BUFFERPOOL BP3 COPY NO PIECESIZE 2097152 K CLUSTER NOT PADDED )
(SQL error -7)
error message returned by dsql:
SQL0007N The character "_" following "" ) USING STOGROUP" is not valid. SQLSTATE=42601
(DB) INFO: disconnected from DB
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100218105045
So as you can see it seems that there's some syntax error in dfacl.log. The wrong SQL statement referred by sapdfact.log is
ind: /BI0/E0PPM_VC1~0
sql: CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"
("KEY_0PPM_VC1T" ,
"KEY_0PPM_VC11" ,
"KEY_0PPM_VC1U" ,
"KEY_0PPM_VC1P" )
USING STOGROUP ___FAI PRIQTY 16
SECQTY 10240 FREEPAGE 0 PCTFREE 0
GBPCACHE CHANGED DEFINE NO
BUFFERPOOL BP3 COPY NO
PIECESIZE 2097152 K CLUSTER NOT PADDED ;
|
ALTER TABLE "/BI0/E0PPM_VC1"
ADD PRIMARY KEY ("KEY_0PPM_VC1T",
"KEY_0PPM_VC11",
"KEY_0PPM_VC1U",
"KEY_0PPM_VC1P") ;
Am i missing something?
Data in referred tables (infocubes) isn't really important.
Is there a safe way to proceed?
Thanks in advance.
Regards
Simone ZaffalonAnd this is the strange point: my source system is not a BI and my dataclasses .SQL files are not empty.
Me too i would expect that the files should be empty but instead they are full of object definitions.
For example i have APPL0.SQL that contains a list of all tables of ECC system, for example
tab: MAMT
sql: CREATE TABLE "MAMT"
("MANDT" SAPDB6VARCHAR(000003)
DEFAULT '000' NOT NULL,
"MATNR" SAPDB6VARCHAR(000018)
DEFAULT ' ' NOT NULL,
"SPRAS" SAPDB6VARCHAR(000001)
DEFAULT ' ' NOT NULL,
"MEINH" SAPDB6VARCHAR(000003)
DEFAULT ' ' NOT NULL,
"MTXID" SAPDB6VARCHAR(000002)
DEFAULT ' ' NOT NULL,
"LFDNR" SAPDB6VARCHAR(000002)
DEFAULT '00' NOT NULL,
"MAKTM" SAPDB6VARCHAR(000040)
DEFAULT ' ' NOT NULL)
IN "&location&"
INDEX IN "&locationI&"
LONG IN "&locationL&"
COMPRESS YES;
ALTER TABLE "MAMT" LOCKSIZE ROW;
and like this for all others tables.
What would occur if i launch an import with such .SQL files?
(shuld i put this question to another thread or is fine for you to answer on this?)
Thank you again.
Simone Zaffalon -
Hi Experts,
I am currently facing an issue/error while doing a homogeneous system copy with SAP NW 7.4 (SAP ERP 6.0 Ehp7) servers. Both source and target systems are test/demo servers and system copy procedure needs to be established as a part of implementation.
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or Move( Last error reported by the step: Assertion failed: Unable to load database RD3. Refer to trace file sapinst_dev.log for further information.)
Sybase ASE version = 15.7_122
sapinst_dev log file description -
Error description (sapinst_dev log file) –
Execution of the command "isql64 -e -w999 -Usa -SSAP-PROD-TEST:4901 -X" finished with return code 0. Output:
Password:
1> use master
1> load database RD3
2> from 'F:/Backup_RD1_04042015/rd1_s1.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s2.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server session id is: 33. Use this value when executing the 'sp_volchanged' system stored procedure after fulfilling any volume change request from the Backup Server.
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s1.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s2.dmp'
Msg 3105, Level 16, State 4:
Server 'RD3', Line 1:
Data on dump will not fit into current database. Need 101376 Mbyte database.
1> online database RD3
Msg 930, Level 14, State 1:
Server 'RD3', Line 1:
Database 'RD3' cannot be opened because either an earlier system termination left LOAD DATABASE incomplete or the database is created with 'for load' option. Load the database or contact a user with System Administrator (SA) role.
No matter how much I try to execute the commands for loading database (LOAD DATABASE & ALTER DATABASE commands), i's not working. I have already added the size mentioned above. Although it still didnt work the size of the DB grew by 99GB (displayed in the incresed size of F: drive in Windows.server 2012 r2 OS level.
Any help leading to closure of this error is highly appreciated. I have attached all necessary screenshots for your kind reference.
Thanks and regards,
M. NizamHi Nizamuddin,
Message text
Data on dump will not fit into current database. Need %d Mbyte database.
Explanation
This error occurs when an attempt is made to load a database dump into a database smaller than the dumped database. You cannot use dump database or load database to shrink a database, regardless of the amount of actual data in the database.
Action
If your goal is to load the database from the dump, you must increase the size of the database being loaded into to at least the configured size of the dumped database. You can do this with either the alter database command or by dropping and re-creating a larger database.
If your goal is to shrink the total size of a database, you cannot use dump and load. You must copy all the data out of the database using bcp, drop the database and re-create a smaller database, then re-create the database structure with scripts, and reload the data with bcp.
extend your current master *database* on the master *device* to a total size of 101376MB(or more) (use 'alter database' command)
alter database master on master = <size in MB>
If there isn't enough room on the master device AND the master device is either a file system device in a file system that has free space or was created on a raw partition that is actually larger than the master device was defined, then you can use the DISK RESIZE command to enlarge the master device
disk resize name = "master", size = <additional space in MB>
Regards,
V Srinivasan -
"System copy stops in "check DDIC password" step
Hi,
We performed a combined upgrade/unicode conversion to ECC5.0 Non-Unicode to ECC 6.0 Unicode ( Windows 2003 Server, Oracle 10gR2 ).
But at the end of import ( using R3load tool ), the import stops at "check DDIC password" step with error message :
"Test logon to SAP System D12 failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
We checked the system, it's online , and the user DDIC exists. But we could not logon using sapgui. it gives message :
"Programm SAPMS380 not found"
If any one could help
thank you
Pascal
file sapinst_dev.log :
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:13:39.460 [iaxxclogintimeout.cpp:92]
CLoginTimeout::run()
Login in progress
TRACE 2008-10-06 12:13:39.460
Connection request to guiengine backend by host 10.90.150.140
TRACE 2008-10-06 12:13:39.460 [iaxxgenimp.cpp:471]
CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE 2008-10-06 12:13:39.475 [iaxxgenimp.cpp:490]
CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation Master</title>
<dialog/>
TRACE 2008-10-06 12:13:39.522
Protocol version is 3.1
TRACE 2008-10-06 12:13:39.522
Send connect information
TRACE 2008-10-06 12:13:39.522
client logged on
TRACE 2008-10-06 12:13:39.803 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:03.131 [iaxxdlghnd.cpp:96]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2008-10-06 12:14:03.131 [iaxxcdialogdoc.cpp:212]
CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO 2008-10-06 12:14:03.147 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
INFO 2008-10-06 12:14:03.147 [synxcfile.cpp:177]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:471]
CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:490]
CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:05.522
current working directory is C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/
INFO 2008-10-06 12:14:05.522 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2008-10-06 12:14:05.522 [synxcfile.cpp:177]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\x.
TRACE 2008-10-06 12:14:06.553
Running with toplevel file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//toplevel.xml
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:14:06.741
Running with dialog file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//dialog.xml
TRACE 2008-10-06 12:14:06.881
Running with keydb file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//keydb.xml
TRACE 2008-10-06 12:14:07.194 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml
INFO 2008-10-06 12:14:07.209 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml'.
TRACE 2008-10-06 12:14:08.709 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml
INFO 2008-10-06 12:14:08.725 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml'.
TRACE 2008-10-06 12:14:17.928
SAPinst was started using commandline: G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214\sapinst.exe
TRACE 2008-10-06 12:14:17.928
SAPinst properties are :
GUISERVER_DIALOG_PORT=21212
GUISERVER_HTTP_PORT=4239
SAPINST_CONTROL_URL=control.xml
SAPINST_DIALOG_PORT=21200
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,SMDAgent
SAPINST_KEYDB_URL=keydb.xml
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_URL=.
SAPINST_PACKAGES_URL=packages.xml
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SKIP_DIALOGS=false
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=true
TRACE 2008-10-06 12:14:17.959 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaejs701.dll
TRACE 2008-10-06 12:14:18.69 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iacdlib701.dll
TRACE 2008-10-06 12:14:18.162 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaccdlib.dll
WARNING 2008-10-06 12:14:18.162 [synxcpath.cpp:912]
CSyPath::getOSNodeType(bool )
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
TRACE 2008-10-06 12:14:18.225 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iapasswdman701.dll
TRACE 2008-10-06 12:14:18.225
This is SAPinst, version 701, make variant 700_REL, build 967243
compiled on Mar 7 2008, 01:01:19
TRACE 2008-10-06 12:14:18.350 [synxcaccmg.cpp:640]
CSyADsPath::fromString(ONEPNET\d12adm)
Account ONEPNET/d12adm has ADS path 'WinNT://ONEPNET/d12adm'
TRACE 2008-10-06 12:14:18.428 [synxcaccnt.cpp:967]
iastring CSyAccountImpl::getSID(IUnknown* pUnk) const
d12adm has SID S-1-5-21-770850386-355409785-620655208-35637
TRACE 2008-10-06 12:14:20.678 [synxcuser.cpp:1076]
CSyUserImpl::isExistingOnOS()
existence check for user d12adm returned true.
TRACE 2008-10-06 12:14:20.678 [syxxccache.cpp:208]
CSyAccountCache::getUserImpl(name="ONEPNET\d12adm", sid="", create=false, ISyProgressObserver* )
inserted account (d12adm, S-1-5-21-770850386-355409785-620655208-35637, USER) into the accountcache.
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:175]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
= C:=C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
= G:=G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214
= J:=J:\Install_ECC6_64_uni\BS_2005_SR3_SAP_Installation_Master\IM_WINDOWS_X86_64
ALLUSERSPROFILE = C:\Documents and Settings\All Users
APPDATA = C:\Documents and Settings\d12adm\Application Data
CLIENTNAME = TAL-MOBILE
ClusterLog = C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles = C:\Program Files\Common Files
CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
COMPUTERNAME = SAPRH-PROD1
ComSpec = C:\WINDOWS\system32\cmd.exe
DBMS_TYPE = ora
dbs_ora_schema = SAPSR3
dbs_ora_tnsname = D12
FP_NO_HOST_CHECK = NO
HOMEDRIVE = C:
HOMEPATH = \Documents and Settings\d12adm
JAVA_HOME = C:\Program Files (x86)\Java\j2re1.4.2_09
LOGONSERVER =
CDBOUREGREG
NLS_LANG = AMERICAN_AMERICA.UTF8
NUMBER_OF_PROCESSORS = 8
ORACLE_HOME = D:\oracle\D12\102
ORACLE_SID = D12
OS = Windows_NT
Path = D:\oracle\D12\102\bin;C:\Program Files (x86)\Java\j2re1.4.2_09\bin;C:\Program Files (x86)\EMC\PowerPath\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\usr\sap\D12\SYS\exe\uc\NTAMD64
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB = D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64-multi-thread;D:\oracle\D12\102\perl\5.8.3\lib;D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64;D:\oracle\D12\102\perl\site\5.8.3;D:\oracle\D12\102\perl\site\5.8.3\lib;D:\oracle\D12\102\sysman\admin\scripts;
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_IDENTIFIER = EM64T Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 0f0b
ProgramFiles = C:\Program Files
ProgramFiles(x86) = C:\Program Files (x86)
SAPDATA_HOME = I:\oracle\D12
SAPEXE = G:\usr\sap\D12\SYS\exe\uc\NTAMD64
SAPINST_EXEDIR_CD = J:/Install_ECC6_64_uni/BS_2005_SR3_SAP_Installation_Master/IM_WINDOWS_X86_64
SAPLOCALHOST = saprh-prod1
SAPSYSTEMNAME = D12
SESSIONNAME = RDP-Tcp#1
SystemDrive = C:
SystemRoot = C:\WINDOWS
TEMP = G:\usr\sap\D12\tmp\1
TMP = G:\usr\sap\D12\tmp\1
TNS_ADMIN = G:\usr\sap\D12\SYS\profile\oracle
USERDNSDOMAIN = ONEPNET.INTRA
USERDOMAIN = ONEPNET
USERNAME = d12adm
USERPROFILE = C:\Documents and Settings\d12adm
windir = C:\WINDOWS
User: ONEPNET\d12adm, Id: S-1-5-21-770850386-355409785-620655208-35637
Working directory: C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:185]
syslib::logSystemState()
System information
==================
OS version, host name: Microsoft Windows [Version 5.2.3790 Service Pack 2] SAPRH-PROD1
RAM size (MB): 12287
Swap size (MB): 21708.6
TRACE 2008-10-06 12:14:20.709
Running with control file control.xml version=701 changelist=33819 product-id=d0e28628
TRACE 2008-10-06 12:14:20.709
Selected Service NW_ABAP_OneHost|ind|ind|ind|ind
TRACE 2008-10-06 12:14:20.709 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml
INFO 2008-10-06 12:14:20.709 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml'.
INFO 2008-10-06 12:14:20.959 [sixxcstepexecute.cpp:387]
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
TRACE 2008-10-06 12:14:29.428
Java script statistics: ScriptSize 4788012 CompileTimeInSeconds 8.437
TRACE 2008-10-06 12:14:29.459 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iajsmod.dll
TRACE 2008-10-06 12:14:29.537 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodos.dll
TRACE 2008-10-06 12:14:29.569 [synxccuren.cpp:1115]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:29.584
Call block:W2K_ServicePack_Check_ind_ind_ind_ind
function:W2K_ServicePack_Check_ind_ind_ind_ind_Preprocess
is validator: false
TRACE 2008-10-06 12:14:29.834
Status of Step |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password is not OK. Re execute only that step and go on in RESTART mode.
TRACE 2008-10-06 12:14:29.991 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml
INFO 2008-10-06 12:14:29.991 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml'.
TRACE 2008-10-06 12:14:30.131 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml
INFO 2008-10-06 12:14:30.147 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml'.
INFO 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:781]
Execute step checkDDIC000Password of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0
TRACE 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:850]
Execution of preprocess block of |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password returns TRUE.
TRACE 2008-10-06 12:14:30.272 [synxccuren.cpp:1115]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:30.272
Call block:NW_DDIC_Password_ind_ind_ind_ind
function:NW_DDIC_Password_ind_ind_ind_ind_SubComponentContainer_checkDDIC000Password
is validator: false
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstance.byNumber(00, saprh-prod1)
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstanceInstall.find(
function (instance) {
return instance.getNumber() == number && instance.getHostName().equals(host);
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall.find() done: 1 instances found
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall.getSystem(D12)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NW()
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NW() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall.getSystem() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers(D12)
TRACE 2008-10-06 12:14:30.319
t_NW_users.updateRow(, WHERE sid='D12'), updating
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.319 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWDialogInstance.getRFCUser() done
TRACE 2008-10-06 12:14:30.381 [syxxccuren.cpp:31]
CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPPARAM700', const iastring & '1')
Environment variable SAPPARAM700 set to value '1'.
TRACE 2008-10-06 12:14:30.397 [iaxxctrace.cpp:42]
CIaIcmAuth::traceInit()
Initialized SAP trace: tf is now set.
INFO 2008-10-06 12:14:30.412 [synxccuren.cpp:65]
CSyCurrentProcessEnvironmentImpl::removeEnvironmentVariable(iastring)
Removed environment variable SAPPARAM700 from current process environment.
TRACE 2008-10-06 12:14:30.412 [iaxxbsapparam.cpp:68]
CIaSAPParam::initializeDefaultValues_impl()
Read default profile values from kernel.
TRACE 2008-10-06 12:14:30.412 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodapp.dll
TRACE 2008-10-06 12:14:30.694 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodrfc.dll
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.084 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:33.957 [iaxxdlghnd.cpp:198]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:35.644 [iaxxdlghnd.cpp:198]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:44:40.278 [iaxxcnclhd.cpp:84]
CCancelHandler::doHandleDoc(IDialogDocument * pDoc )
ACTION_CANCEL requested
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> You are about to cancel the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System installation. <li> Choose one of the following: </li> <ul> <li> 'Continue' - to continue the installation. </li> <li> 'Stop' - to stop the installation and exit SAPinst. You can continue the installation later from this point<br>Note:<br>If you stop the installation after the installation activites have been started, do not use the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System, as it is not ready to be used. </li> </ul> </body></html>
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-10-06 12:44:41.840 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
INFO 2008-10-06 12:44:42.074 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.Hi,
The possible problem for the DDIC user could be, once the data imported the password of the DDIC got reset to older password as in ECC5, try login the system with sap* user and reset the password of DDIC, then login as DDIC user and set the password permannetly and retry the activity.
If sap* also shows with same problem try changing the password of sap* from DB level by executing the query(you can find solutions for this in SDN forum threads, check them). or try deleting the user sap* and recreate where user gets creted wiuth default pasword as "PASS" and logon and reset the user DDIC.
Regards. -
Error during Heterogeneous System Copy - Phase 18 Import ABAP
Hello gurus,
I´m facing an error during the Target Installation in a Heterogeneous System Copy (Migration). The system SAP is a SAP ECC 6.0 SR3 (Unicode and Abap+Java).
Source server:
Operation System: Windows 2003 Server x64
Database: SQL Server 2008 SP01
Target server:
Operation System: Red Hat Enterprise Linux (RHEL) X64
Database: Oracle DB 10.2g (10.2.0.4)
I already did the all procedures in export database and all that looks fine!
At this point I´m running the system copy procedure through SAPInst on target server (RHEL / Oracle) but in phase 18 - Import ABAP the sapinst stops... (by the way in procedure bar, I can see "Import Monitor jobs: running 0, waiting 1, completed 0, failed 18, total 19")
I checked three log files (sapinst_dev.log ; sapinst.log ; SAPSDIC.log):
SAPSDIC.log:
/usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20100820145140
/usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/QAS/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jan 23 2008 17:39:05
/usr/sap/QAS/SYS/exe/run/R3load -ctf I /software/export_preparation/ABAP/DATA/SAPSDIC.STR /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS/DDLORA.TPL SAPSDIC.TSK ORA -l SAPSDIC.log
(TPL) ERROR: unknown template variable "compress"
/usr/sap/QAS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20100820145140Hi Volker,
> (TPL) ERROR: unknown template variable "compress"
> This message looks like the DDLORA.TPL contains stuff that should not belong there.
> Can you attach the DDLORA.TPL.
> There are some bugs with SMIGR_CREATE_DDL, but they are mostly not related to oracle.
prikey: AFTER_LOAD ORDER_BY_PKEY
seckey: AFTER_LOAD
cretab: CREATE TABLE &tab_name&
( /{ &fld_name& &fld_desc& /-, /} )
TABLESPACE &tablespace&
&compress&
&lob_cache&
STORAGE (INITIAL &init&
NEXT &next&
MINEXTENTS &minext&
MAXEXTENTS &maxext&
PCTINCREASE &pctinc& )
drptab: DROP TABLE &tab_name&
crepky: CREATE UNIQUE INDEX &pri_key&
ON &tab_name&
( &key_fld& /-, )
TABLESPACE &tablespace&
STORAGE (INITIAL &init&
NEXT &next&
MINEXTENTS &minext&
MAXEXTENTS &maxext&
PCTINCREASE &pctinc& )
NOLOGGING
COMPUTE STATISTICS ;
ALTER INDEX &pri_key& LOGGING
drppky: DROP INDEX &pri_key&
creind: CREATE &unique& INDEX &ind_name&
ON &tab_name&
( /{ &fld_name& /-, /} )
TABLESPACE &tablespace&
STORAGE (INITIAL &init&
NEXT &next&
MINEXTENTS &minext&
MAXEXTENTS &maxext&
PCTINCREASE &pctinc& )
NOLOGGING
COMPUTE STATISTICS ;
ALTER INDEX &ind_name& LOGGING
drpind: DROP INDEX &ind_name&
crevie: CREATE VIEW &view_name&
( /{ &fld_name& /-, /} )
AS &query&
drpvie: DROP VIEW &view_name&
trcdat: TRUNCATE TABLE &tab_name&
deldat: DELETE FROM &tab_name& &where&
negtab: LICHECK MLICHECK
negdat: LICHECK MLICHECK
negind: LICHECK0 MLICHECK0 LICHECK0 MLICHECK0
negvie:
negcpr:ARFCSSTATE ARFCSDATA ARFCRSTATE TRFCQDATA TRFCQIN TRFCQOUT TRFCQSTATE QRFCTRACE QRFCLOG
table storage parameters
loc: APPL0 PSAPSR3 0000
APPL1 PSAPSR3 0000
APPL2 PSAPSR3 0000
CLUST PSAPSR3 0000
DDIM PSAPSR3 0000
DFACT PSAPSR3 0000
DODS PSAPSR3 0000
POOL PSAPSR3 0000
SDIC PSAPSR3 0
SDOCU PSAPSR3 0000
SLDEF PSAPSR3700 0000
SLEXC PSAPSR3700 0000
SLOAD PSAPSR3 0000
SPROT PSAPSR3 0000
SSDEF PSAPSR3700 0000
SSEXC PSAPSR3700 0000
SSRC PSAPSR3 0000
TEMP PSAPSR3 0000
USER PSAPSR3USR 0000
USER1 PSAPSR3USR 0000
sto: 0 0000000016K 0000000040K 0000000001 2147483645
1 0000000016K 0000000160K 0000000001 2147483645
10 0000000016K 0000655360K 0000000001 2147483645
11 0000000016K 0001310720K 0000000001 2147483645
12 0000000016K 0002621440K 0000000001 2147483645
13 0000000016K 0005242880K 0000000001 2147483645
14 0000000016K 0010485760K 0000000001 2147483645
2 0000000016K 0000000640K 0000000001 2147483645
3 0000000016K 0000002560K 0000000001 2147483645
4 0000000016K 0000010240K 0000000001 2147483645
5 0000000016K 0000020480K 0000000001 2147483645
6 0000000016K 0000040960K 0000000001 2147483645
7 0000000016K 0000081920K 0000000001 2147483645
8 0000000016K 0000163840K 0000000001 2147483645
9 0000000016K 0000327680K 0000000001 2147483645
index storage parameters
loc: APPL0 PSAPSR3 0000
APPL1 PSAPSR3 0000
APPL2 PSAPSR3 0000
CLUST PSAPSR3 0000
DDIM PSAPSR3 0000
DFACT PSAPSR3 0000
DODS PSAPSR3 0000
POOL PSAPSR3 0000
SDIC PSAPSR3 0
SDOCU PSAPSR3 0000
SLDEF PSAPSR3700 0000
SLEXC PSAPSR3700 0000
SLOAD PSAPSR3 0000
SPROT PSAPSR3 0000
SSDEF PSAPSR3700 0000
SSEXC PSAPSR3700 0000
SSRC PSAPSR3 0000
TEMP PSAPSR3 0000
USER PSAPSR3USR 0000
USER1 PSAPSR3USR 0000
sto: 0 0000000016K 0000000040K 0000000001 2147483645
1 0000000016K 0000000080K 0000000001 2147483645
10 0000000016K 0000163840K 0000000001 2147483645
11 0000000016K 0000327680K 0000000001 2147483645
12 0000000016K 0000655360K 0000000001 2147483645
13 0000000016K 0001310720K 0000000001 2147483645
14 0000000016K 0002621440K 0000000001 2147483645
2 0000000016K 0000000160K 0000000001 2147483645
3 0000000016K 0000000640K 0000000001 2147483645
4 0000000016K 0000002560K 0000000001 2147483645
5 0000000016K 0000005120K 0000000001 2147483645
6 0000000016K 0000010240K 0000000001 2147483645
7 0000000016K 0000020480K 0000000001 2147483645
8 0000000016K 0000040960K 0000000001 2147483645
9 0000000016K 0000081920K 0000000001 2147483645 -
Symbolic link error when exporting during heterogeneous system copy
My enviroment is ECC6.0/Oracle 10.2.0.2/SUN Solaris 10 . I'm performing heterogeneous system copy to Oracle 10.2.0.2/AIX 6.1 enviroment.
I've succesfully exported & imported two systems ie DEV & Solutin Manager , but PRD system has an OS problem with symbolic links ie Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
I want to export both ABAP & JAVA stack but only the java stack is getting picked.
Below is part of the resultng sapinst.log
Thanks
INFO 2011-09-05 10:44:30.573
Execute step verifyJavaHome of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO[E] 2011-09-05 10:44:33.851
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:33.851
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO 2011-09-05 10:44:46.118
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Mon Sep 05 10:44:45 EAT 2011
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc
java.vm.version=1.4.2_09-b05
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=\:
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=unknown
java.vm.specification.name=Java Virtual Machine Specification
user.dir=/oracle/PRD/INSTDIR/sapinst_dir
java.runtime.version=1.4.2_09-b05
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.endorsed.dirs=/usr/j2sdk1.4.2_09/jre/lib/endorsed
os.arch=sparc
java.io.tmpdir=/var/tmp/
line.separator=\n
java.vm.specification.vendor=Sun Microsystems Inc.
os.name=SunOS
sun.java2d.fontpath=
java.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc/client\:/usr/j2sdk1.4.2_09/jre/lib/sparc\:/usr/j2sdk1.4.2_09/jre/../lib/sparc\:/tmp/sapinst_exe.29247.1315208256\:/usr/openwin/lib\:/usr/lib
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.FileSystemPreferencesFactory
os.version=5.10
user.home=/
user.timezone=Africa/Nairobi
java.awt.printerjob=sun.print.PSPrinterJob
file.encoding=ISO8859-1
java.specification.version=1.4
java.class.path=/tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar
user.name=root
java.vm.specification.version=1.0
java.home=/usr/j2sdk1.4.2_09/jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
java.vm.info=mixed mode
java.version=1.4.2_09
java.ext.dirs=/usr/j2sdk1.4.2_09/jre/lib/ext
sun.boot.class.path=/usr/j2sdk1.4.2_09/jre/lib/rt.jar\:/usr/j2sdk1.4.2_09/jre/lib/i18n.jar\:/usr/j2sdk1.4.2_09/jre/lib/sunrsasign.jar\:/usr/j2sdk1.4.2_09/jre/lib/jsse.jar\:/usr/j2sdk1.4.2_09/jre/lib/jce.jar\:/usr/j2sdk1.4.2_09/jre/lib/charsets.jar\:/usr/j2sdk1.4.2_09/jre/classes
java.vendor=Sun Microsystems Inc.
file.separator=/
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeBig
sun.cpu.endian=big
sun.cpu.isalist=sparcv9vis2 sparcv9vis sparcv9 sparcv8plusvis2 sparcv8plusvis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc
INFO 2011-09-05 10:44:47.076
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar:/tmp/sapinst_exe.29247.1315208256/JAR/sapxmltoolkit.jar -d64 com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2011-09-05 10:44:47.572
Execute step verifyPolicy of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO 2011-09-05 10:44:47.715
Execute step setNWOption of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
WARNING 2011-09-05 10:44:47.944
Could not determine a valid JAVA_HOME directory from the environment.
INFO 2011-09-05 10:44:48.86
Execute step assignUsersToSapinstGroup of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:48.890
Account sapinst already exists.
INFO 2011-09-05 10:44:48.894
Account prdadm already exists.
INFO 2011-09-05 10:44:48.917
Account oraprd already exists.
INFO 2011-09-05 10:44:49.73
Execute step useDatabaseMethod of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.217
Execute step setDatabaseMethodOra of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.341
Execute step setDatabaseMethodDB6 of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.480
Execute step mainExportParameters of component |NW_Export|ind|ind|ind|ind|0|0
INFO[E] 2011-09-05 10:44:52.251
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:52.252
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.760
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/cntrl), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.761
FSL-02061 Link /oracle/PRD/cntrl is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.762
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.762
FSL-02061 Link /oracle/PRD/._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.763
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sdubhibq), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.764
FSL-02061 Link /oracle/PRD/sdubhibq is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.765
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sduccayx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.765
FSL-02061 Link /oracle/PRD/sduccayx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.766
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/inventory), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.767
FSL-02061 Link /oracle/PRD/inventory is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.768
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/OPatch), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.768
FSL-02061 Link /oracle/PRD/OPatch is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.769
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/assistants), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.770
FSL-02061 Link /oracle/PRD/assistants is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.771
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/bin), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.772
FSL-02061 Link /oracle/PRD/bin is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.773
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/clone), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.773
FSL-02061 Link /oracle/PRD/clone is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.774
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/crs), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.775
FSL-02061 Link /oracle/PRD/crs is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.776
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/css), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.777
FSL-02061 Link /oracle/PRD/css is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.778
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/ctx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.778
FSL-02061 Link /oracle/PRD/ctx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.779
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/dbs), line (346) in file (syuxclink.cpp).Hi,
In PRD system, u might have craeted many symbolic links in /oracle/PRD fileystem . This should be avoided. Symbolic link should not be created in /oracle/PRD ...
Please check why symbolic links are created and get help from System Operation team . Please becareful to unlink symbolic links that are created by non-SAP. Make sure to perform full offline backup .
Please get the help from Unix System Operation team. Also it does not makes any sense to increase value of Unix parameter for maximum symbolic links.
Regards
APR
Maybe you are looking for
-
How can I type over existing text on a web page?
I would like to be able to type over existing text on a web page. This can be done by hitting the "insert" key in several applications; however, it does not work in Firefox. I'm running Firefox 31.0 and Windows 7.
-
Add custom tab at line item level in transaction FMBB to view CI_FMBL flds
Good day to all, We have added new fields in Budget posting (FMBB) in Line data using custom include CI_FMBL. We want to display some item level fields from CI_FMBL in tab - Financial Budget We also want to add more item level tabs, next to tab Fina
-
just installed PS 13 elements and loaded pictures into organizer. after using PS editor now organizer is not reloading. I keep getting error message saying organizer unexpectedly quit, do you want to reopen. When I click on it to reopen it doesn't a
-
Photoshop CS4, error code -36
This error refers to my scratch disk. It was a photoshop error. It happened while using the selection tool, and shut photoshop down. I then jumped into acrobat to see if i could save a file, and it wouldn't let me either. Scary. I just want to know w
-
Errors 363500 and 56 on HTTPS GET.vi
Hello, I'm trying to execute my program, but it keeps pausing every few minutes primarily due to errors 56 and 363500 of the HTTPS Client Library. Using General Error Handler I tried to cancel these errors and make the VI run and try again; however,