System copy - NW2004s BI - ABAP & JAVA

Hi
We plan to create a new NW2004s (SRII) BI ABAP & JAVA system through a system copy. As this is java & abap it would seem using the sapinst method using the install CD would be best. I am looking for documentation for this method and I wondered if anyone else had tried this task.
Thanks in advance.
Matthew Milne

Hi,
there is a documentation under Installation Guides - Installation - System Copy for SAP Systems Based on NW 7.0 SR2 ABAP+JAVA.
We only did the copy for 640 and Java only.
Hope this helps.
Regards,
Ingrid

Similar Messages

Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA

Hello guys,
I have just performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
Any other suggestions and good advices?
Thanks a lot in advance.
Regards, Polina

Hi Manoj, 
I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy): /usr/sap/SID/instance/work/ 
1) std_server0.out is in the condition before the system copy, no new data was written there. 
2)dev_disp 
DpJ2eeStart: j2ee state = STARTED 
DpJ2eeLogin: j2ee state = CONNECTED 
Fri Feb 26 12:58:04 2010 
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212] 
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Fri Feb 26 12:58:20 2010 
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN 
Fri Feb 26 12:57:20 2010 
***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207] 
ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp 3214] 
WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp 3491]
It seems that java is trying to start but something goes wrong and it have to shut down
3)dev_bootstrap 
[Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66) 
[Thr 1086335296] ********************************************************************** 
ERROR => The Java VM terminated with a non-zero exit code. 
Please see SAP Note 943602 , section 'J2EE Engine exit codes' 
for additional information and trouble shooting. 
********************************************************************** 
[Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17 
[Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)
4) jvm_bootstrap.out 
... 
Exception occurred: 
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
.. 
Exception occurred: 
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties! 
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476) 
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146) 
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties! 
[Bootstrap module]> Problem occurred while performing synchronization.
j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...
Thanks in advance. 
Regards, 
Polina

Homogeneous system copy on windows abap + java with a backup online

Hello gurus, I need to perform a refresh (HSC) from our production to our test system. we have a daily backup online that I want to use for restoring the test system .
from the procedure it's not clear how to proceed .
as my point of view i should say :
1) perform a restore redirect using backup online
2) export on the production the java side using database specific tools
3) import the java side on the restored database (when it stops to ask me to restore database i will use the backup created by the export procedure)
4) apply all the logs to the end of export of java to put the database in a consistente state
5) finish the procedure of import
my question marks are related to the step 2) and 3) . the restored database will keep the data of java side from the second backup (export) run by sapinst?
and.. do I have to apply logs till the export is finished to put db in a consistente state?
someone of you have performed it once ?
any advice is greatly apprechated

Hello guys,so just to be clear again
on the target system I have to execute
db2 drop database <SID> and following delete the content of sapdata?
I have seen on this website the possibility to execute the redirect restore using the comman "replace existing" . Can I apply this without deleting anything ?
ftp://ftp.software.ibm.com/ps/products/db2/info/vr9/pdf/letter/en_US/db2hae90.pdf
REPLACE EXISTING If a database with the same alias as the target database alias already exists, this parameter specifies that the restore utility is to replace the existing database with the restored database. This is useful for scripts that invoke the restore utility, because the command line processor will not prompt the user to verify deletion of an existing database.
For the java side , once the the restore redirect has been performed successful do I have to use the option for recreating the WAS AS JAVA only as system copy only? This will populate my java side correctly with the data of my exporting system?
best regards

Error:Target system copy based on AS-JAVA

Hi,
While we were trying to restore NW2004S java Stack using target system copy SAPINST stopped with the following errors.
FJS-0003 refernce Error :row is not defined
FCO-00011 The Step checkForLoadType with step key.
As per note 970518 we have deleted the line, row.createdb=false from control.xml file..but it didn't work out. Can anyone help ???
Thanks
Saritha

I am experiencing this same issue, with the fix from the above note implemented. Has anyone figured out a work around for this issue?

System copy sapinst method no java engine found

Hi all,
I have completed my system copy of R3 ECC 6.0 and BI7 system to another machines for testing purpose using sapinst method.
Basically i have used installation master DVD and went for option Additional software life cycle _ system copy -- Source system - Based on abap + java -- Export
and then along with DDLs from SMIGR_CREATE_DDL program i have prepared Export and performed Import at target machine with
installation master DVD and went for option Additional software life cycle _ system copy -- Target system - Based on abap + java -- Import
Give different hostname this time.
all phases successfully completed in both machines and i am able to login to both systems successfully.
But unfortunately i dont find j2ee_process table in MMC ( as i have in source system ) , but everything is green
in MMC and smicm transaction shows no HTTP port entry but again green signal.
Is there anything else to carry out to get j2ee_engine working at target system.
also http://host:port/nwa for target system not working ,
Can anybody throw some light on this issue , initially i was struglling for getting this import successfully done but now j2ee_process table is an issue for me.
Best Regards,
AjitR

Since it is Test machine , i tried with option
Additional software life cycle tasks --> java Add in for ABAP --> central system -->
central service instance java addin
and provided required inputs for screens and task completed .
Now i can see j2ee process table under MMC .
Is this normal scenario we should do after system copy through SAPINST ?
If i have performed sapinst system copy for ABAP + java system then why it was not included in first import success ?

Disp+work in Yellow flag (Win 2003; MaxDB; NW2004s, BI-ABAP+Java)

Hi Gurus,
We have Win 2003, MaxDB in NW2004s with BI-ABAP+Java.
When we tried to start SAP via MMC, disp+work in Yellow flag . Can anyone tell how to move forward.
Please find error below:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BI1
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 3684
Tue Dec 12 13:51:40 2006
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 3684) [dpxxdisp.c 1231]
 shared lib "dw_xml.dll" version 52 successfully loaded
 shared lib "dw_xtc.dll" version 52 successfully loaded
 shared lib "dw_stl.dll" version 52 successfully loaded
 shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Tue Dec 12 13:51:45 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ootspdbs01_BI1_01 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 060B0040, size: 4607512)
DpShMCreate: allocated sys_adm at 060B0040
DpShMCreate: allocated wp_adm at 060B1E28
DpShMCreate: allocated tm_adm_list at 060B4FA8
DpShMCreate: allocated tm_adm at 060B4FD8
DpShMCreate: allocated wp_ca_adm at 0647A570
DpShMCreate: allocated appc_ca_adm at 06480330
DpShMCreate: allocated comm_adm at 06482270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06503130
DpShMCreate: allocated gw_adm at 06503170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 065031A0
DpShMCreate: allocated wall_adm at 065031A8
Tue Dec 12 13:51:46 2006
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 900
argv[0] = E:\usr\sap\BI1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\BI1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\BI1\SYS\profile\BI1_DVEBMGS01_ootspdbs01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1042
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BI1
argv[7] = -DSAPMYNAME=ootspdbs01_BI1_01
argv[8] = -DSAPPROFILE=E:\usr\sap\BI1\SYS\profile\BI1_DVEBMGS01_ootspdbs01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( ootspdbs01) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >ootspdbs01_BI1_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.

- > sdbregview -l
<<< OUTPUT >>>
Server Utilities c:/program files/sdb/programs 7.6.00.18 32 bit valid
DB Analyzer c:/program files/sdb/programs 7.6.00.18 32 bit valid
PCR 7300 c:/program files/sdb/programs 7.3.00.54 valid
Base c:/program files/sdb/programs 7.6.00.18 32 bit valid
Redist Python c:/program files/sdb/programs 7.6.00.18 32 bit valid
PCR 7301 c:/program files/sdb/programs 7.3.01.19 valid
JDBC c:/program files/sdb/programs 7.6.00.16 valid
Messages c:/program files/sdb/programs MSG 0.3017 valid
ODBC c:/program files/sdb/programs 7.6.00.18 32 bit valid
Database Kernel c:/program files/sdb/7600 7.6.00.18 32 bit valid
Database Kernel e:/sapdb/bi1/db 7.6.00.18 32 bit valid
Loader c:/program files/sdb/programs 7.6.00.18 32 bit valid
PCR 7104 c:/program files/sdb/programs 7.1.04.45 valid
SQLDBC c:/program files/sdb/programs 7.6.00.18 32 bit valid
Webtools c:/program files/sdb/programs/web 7.6.00.18 32 bit valid
SQLDBC 7600 c:/program files/sdb/programs 7.6.00.18 32 bit valid
PCR 7403 c:/program files/sdb/programs 7.4.03.40 32 bit valid
-> dbmcli -s inst_enum
<<< OUTPUT >>>
OK
7.6.00.18 e:\sapdb\bi1\db
7.6.00.18 c:\program files\sdb\7600
-> dbmcli -s db_enum
<<< OUTPUT >>>
OK
BI1 e:\sapdb\bi1\db 7.6.00.18 slow offline
BI1 e:\sapdb\bi1\db 7.6.00.18 fast running
Also, let me know how to find out user ID & Password of DBM.

Java system copy problems with the Java Migration Toolkit

During the JAVA system copy, we have have got the error in second last
step i.e;Java Migration Toolkit. We tried to do the system copy twice
but every time we have got the below error.
Is this a know bug? I have got the OSS note 966752 but the value
of 'src.ci.host' is already correct. has anybody come across the similar issue. please help.
" CJSlibModule::writeInfo_impl()
Output of /usr/java14_64/bin/java -
classpath /usr/sap/CMT/SYS/global/sltools/sharedlib/launcher.jar:. -Xj9
com.sap.engine.offline.OfflineToolStart
com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/CMT/SYS/global/sltools/jmt:/usr/sap/CMT/SYS/global/sltools/sharedlib import.switch
resume downtime mti.properties is written to the
logfile /home/cmtadm/CI_Import_08312009/runJmt.log.
WARNING 2009-09-01 20:49:43.473
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/java14_64/bin/java -
classpath /usr/sap/CMT/SYS/global/sltools/sharedlib/launcher.jar:. -Xj9
com.sap.engine.offline.OfflineToolStart
com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/CMT/SYS/global/sltools/jmt:/usr/sap/CMT/SYS/global/sltools/sharedlib import.switch
resume downtime mti.properties" finished with return code 27. Output:
ERROR 2009-09-01 20:49:43.477
CJSlibModule::writeError_impl()
CJS-20068 Error when running the J2EE Migration Toolkit. SOLUTION:
See output of logfile /home/cmtadm/CI_Import_08312009/runJmt.log: ''.
ERROR 2009-09-01 20:49:43.479
CJSlibModule::writeError_impl()
CJS-20068 Error when running the J2EE Migration Toolkit. SOLUTION:
See output of logfile /home/cmtadm/CI_Import_08312009/runJmt.log: ''.
ERROR 2009-09-01 20:49:43.480 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step RunMigrationController with step key
|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|RunMigrationController was executed with status ERROR ."
There is no log file by the name runJmt.log.
Regards,
Sagar

This issue was resolved by OSS note 966752 itself. Below is the important line in the OSS note.
Note: The default value is crucial! If a custom value other than the default value was applied, we highly recommend that you restore the default value.
Thanks,
Sagar

Homogeneous System copy - NW2004s

I am trying to perform a homogeneous system copy of NW2004s ECC6 system using sapinst.
Platform info:
OS - HPUX
DB - Oracle
I am using DB specific (oracle) method to restore an offline backup.
When I run the sapinst to import, I get past preliminary information screens and when I select "Homogeneous System Copy (backup/restore)", I am prompted for the location of LABEL.ASC for the migration.
The documentation in the guide "Homogeneous System Copy of NW2004s" is poor and does not address this issue.
I suspect there is a bug in sapinst.
Has anyone come across this issue before?
Thanks,
Sai

Steps for homogeneus copy :
1. Export of source system using sapinst ( R3load )
2. transfer the file over to target system
3. Do new installation of he system by using the transfered file as you export file.
I gues the menu in sapinst would be additional lifecycle task .

System copy errors during ABAP export ECC 5.0

Hi
I'm need to do system system copy for our ECC 5.0 system on Win/ora platform. I have followed the system copy document from SMP. I'm getting the below error while exporting the ABAP schema. Could someone guide me on how to fix this.
ERROR 2008-12-25 11:32:27
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPCLUST.log
=======================
(NT) Error: AABLG: normal NameTab from 20050112230750 younger than alternate NameTab from 20000323230317!
(SYSLOG) INFO: k CQF : AABLG&20000323230317&20050112230750&                 rscpgdio 47
(RSCP) ERROR: -
3-
(RSCP) ERROR: code:   64 RSCPECALL
(RSCP) ERROR: Altername NameTab too old
(RSCP) ERROR: module: rscpgdio location:   47 line: 3007
(RSCP) ERROR: TSL01: CQF p3: AABLG&20000323230317&20050112230750&
(RSCP) ERROR: -
myCluster (55.20.Exp): 924: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.20.Exp): 925: suspicious create timestamp of alternate nametab encountered.
myCluster (55.20.Exp): 929: create timestamps of nametab: 20050112230750; alternate nametab: 20000323230317.
myCluster (55.20.Exp): 299: error when retrieving physical nametab for table AABLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
======================
ERROR 2008-12-25 11:32:27
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPPOOL.log
===========================
(NT) Error: AT01: normal NameTab from 20050112234859 younger than alternate NameTab from 20011002204708!
(SYSLOG) INFO: k CQF : AT01&20011002204708&20050112234859&                  rscpgdio 47
(CNVPOOL) Altername NameTab too old AT01&20011002204708&20050112234859&   Abort.
(CNVPOOL) conversion failed for row 0 of table VARKEY = 010100
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
=========================
ERROR 2008-12-25 11:32:27
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSSEXC.log
===========================
(NT) Error: DOKCLU: normal NameTab from 20050112230750 younger than alternate NameTab from 20000323224119!
(SYSLOG) INFO: k CQF : DOKCLU&20000323224119&20050112230750&                rscpgdio 47
(RSCP) ERROR: -
3-
(RSCP) ERROR: code:   64 RSCPECALL
(RSCP) ERROR: Altername NameTab too old
(RSCP) ERROR: module: rscpgdio location:   47 line: 3007
(RSCP) ERROR: TSL01: CQF p3: DOKCLU&20000323224119&20050112230750&
(RSCP) ERROR: -
myCluster (55.20.Exp): 924: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.20.Exp): 925: suspicious create timestamp of alternate nametab encountered.
myCluster (55.20.Exp): 929: create timestamps of nametab: 20050112230750; alternate nametab: 20000323224119.
myCluster (55.20.Exp): 299: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
========================
ERROR 2008-12-25 11:32:27
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSDIC.log
========================
(EXP) INFO: check for inactive NameTab entries: Ok.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
=======================
Thanks & Regards
Jagan

C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPCLUST.log
C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPPOOL.log
C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSSEXC.log
C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSDIC.log
paste the above logs here.
Thanks
SM

System copy of a ABAP+J2EE WAS 6.40 system - issue w. J2EE instance/Mapbox

Hi guys and girs!
I'm doing a system copy of a CRM 4 system based on Web AS 6.40 and with a dual stack system.
The J2EE instance is only used for Mapbox and nothing else.
I've done a system export of the J2EE instance on the source system, but when I import it, it gives me the following message "No SAP data found in database CRD"
Is this because Mapbox does not use the database or have I done something wrong?
I run sapinst.exe and choose SAP CRM 4 - System Copy - Target System - Java system - MS SQL Server - Migration-Target System Installation to import the exported data.
Maybe there is no data?!?! and I sould only install a Java central instance and then deploy the mapbox package with SDM?!
regards
rollo
Edited by: rollo on Dec 10, 2008 3:14 PM

Hi!
No, I haven't figured it out.
But since we are not going to use the groupware integration for some time, I might just skip it and install it during or after the upgrade.
rollo

Installing NW2004s ABAP+JAVA Instance

Hello
We are trying to install ABAP+JAVA instance for our CRM system . On our Dev machine we have installed the CRM as Central system and have done the Java ADD-IN . However while doing a system copy of this we have faced some problems regarding the Java part .
We wanted to install in the QA box , seperate instance of ABAP and JAVA for Nw2004s CRM using the same database via sapinst.
Any ideas of how to go about this ? Also has anyone faced major problems regarding system copy with sepetrate ABAP+JAVA instances setup for NW2004s .
Many Thanks .
Rhitam

Hi ,
Please refer to the links below :-
may i know what kind of system copy are you trying for ? what's your OS used ?
http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24cd04ba111d189750000e8322d00/frameset.htm
Note 785848 - Hom./Het.System Copy SAP Web AS 6.40 SR1 Java
Note 884452 - Remote export of Java stack
Regards,
Manomeet Mohapatra

(ABAP+JAVA) system is too big to export/import

We have some NW04s and ECC6 dual stack systems that we want to frequently clone using homogeneous system copy method.
However they can be as big as many terabytes.
Is there a way to clone they using a way other than export/import?
Thanks!

Hi,
As of SAP NetWeaver 7.0, you can copy ABAPJava systems in one run using either database-specific methods or database-independent methods. In a ABAPJAVA stack system, you need to run a separate export for the Java engine to archive SDM and application specific file contents. You will have to supply that java Export location on the target system, while performing DB specific system copy procedure.
Please refer [system copy guide for ABAP+JAVA stack |http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000670917&_SCENARIO=01100035870000000112&_OBJECT=011000358700000416402008E] along with the previously suggested links to get more information.
Regards
Bhavik G. Shroff

XI system copy

Hello,
I'm going to clone my xi. As I'm reading the homogeneous and heterogenous system copy for java and abap. I'm to the following conclusion. I need to do a oracle server specific copy. And do a sid rename on db level and in abap side with se06.
but what about the java part? and what about the xi msg's that are in the systems and the adapters? Should i disable some adapters? and so on.
In the java system copy there are some configur ation steps for xi. telling about sld integration server, exchange profile,cache,... but they are not telling about the msg's that still are in the system.
What are the steps that I'm missing?
Chris

hi
If XI is running ong NW4S then you can use standard system copy guide for ABAP+Java.
I dont know how many interfaces you have configured in your XI box, I also requested to make a copy of XI box.
Easy way is for XI 3.0
1. Install XI 3.0 with different SID & apply all the SPs & Kernel patch as source.
2. Create new business systems with target group
2. Synchronize SLD using full export/import
3. Export the Software components from Source & import to target
4. export the Configuration Scenario & import to target.
This activity would take 24 working Hrs to build but its easy & consistent way to build a copy of existing system (This is my experience).
Best luck

System Copy using sapinst - Step Migration Export SAP:MIGSDM:700:*:*:*

Hi we are trying to do a system copy of a ABAP/ Java Addin - 70 SR3 from one system to another.
We took the sapinst option for Central BASED on ABAP and JAVA
We took the save restore option.
We are curretly stuck at the step Migration Export. Looking for the LABEL.ASC for
SAP:MIGSDM:700:::*
We took the java option to create the SDM export on the source system. My export location has the following :
LABELIDX.ASC
        JDMP
        SDM
        APPS
LABEL.ASC
SAP:JMIG:700:::*
Any ideas / suggestions?
Regards,
Brian

> I just started sapinst and selected "export central system based on ABAP + Java".
> There is an entry in the main export folder
> LABELIDX.ASC
> -ABAP
> -JAVA
>
> ABAP folder is empty
This is possible since you may have chosen the "database specific" copy. So the copy process will only pack the Java part which you will use later for the target system.
> JAVA folder has 3 files
> LABEL.ASC_
> - SAP:JMIG:700:::*
> LABELIDX.ASC
> -JDMP
> -SDM
> -APPS
Looks good!
If the export is finished you can start sapinst again on the target system, select again ABAP + Java and "database specific copy", the system will then start with the installation and stop at some point to restore the database. After that is done continue with sapinst.
Markus

BI system copy

Hi
I am given task to perform BI system copy. The source BI is abap+Java based on same host (Linux/Oracle). I have the offline backup of the system.
1) Can I perform system copy of both abap+java using this offline backup.
2) I tried the procedure using sapinst homogeneous system copy and during installation it asks me for "Migration export" and as per my understanding it is Java export.
3) Do I have to make the export of the Java Schema too from the source system.
How can I perform the BI system copy (Abap + Java). Please guide

you can refer this...system copy with SAP netweaver 7.0 SR3 an BI JAVA
http://help.sap.com/saphelp_nw70/helpdata/en/a2/2f0c173a5e43d19585724239ff4de7/content.htm
Splitting System Copy on BI Dual stack
http://xa.yimg.com/kq/groups/9574236/1226231766/name/sapnote_0001181025.pdf

System copy - NW2004s BI - ABAP & JAVA

Similar Messages

Maybe you are looking for