System copy of a DEV system on the same server

Hi experts!
In our company, we have a 2-systems landscape, DEV and PRD, and we are working on the system together with another organization of the same company. Now, they want me to "split" the systems, one for each organization, making a copy of the systems. In other words, they want to completely split the systems, running on the same server, development server will have 2 systems, DEV and DEV' and so on in production server.
The doubt is in developments, as I don't know how to face the CTS and TMS setup to provide 2 different development environments, without losing the actual change requests for both systems. As you know, I have to change the SID, because the copy will be in the same server, so what happends with change requests?? Do I have to make a copy of DIR_TRANS and set up a new DIR_TRANS for the new system???
Thank you in advance!
Fran.

Hi William,
I guess I did not explain it properly.
Now we have:
1. System DEV in DEV server.
2. System PRD in PRD server.
Transport later ZDEV from DEV to PRD.
And we will do:
1. Homogeneous system copy from DEV to DEV' in DEV server, so we will have DEV and DEV' on the same server.
2. Homogeneous system copy from PRD to PRD' in PRD server, so we will have PRD and PRD' on the same server.
Sizing is good, servers are very powerful.
The doubt is configuring the TMS, as we will have two different development environments on the same server. How do I have to set up the TMS properly???
Thanks!!

Similar Messages

Install SAP Solution Manager with DEV instance in the same server (MCOD)

Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine.
I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. But when i am installing the SolMan through the sapinst i don´t see the option MCOD
The only option i am confussed is
MS SQL Server
Database reuse o - New Database (DBSID = SAPSID)
o - Use Existing Database
Database ID (DBSID)
Witch option should i choose to perform a MCOD installation? new db or use existing db (DEV)?
Kind Regards

Hi Merchan, if you want to use MCOD you need to select the option: o - Use Existing Database
Database ID (DBSID) .
Regards,
Darwin C.

Two SRM system in the same Portal

Dear Guru,
we need your support for the following question.
I'm working with SRM 7 and ECC in a extended classic scenario. SRM is available thorugh the portal. For training activity we need to have another copy of SRM and ECC system. It is possible to connect in the same time two SRM system in the unique portal?
Thanks a lot.
Best Regards
Giuseppe

Hello Giuseppe,
As per the standard , there is no possibility to work on twins SRM system at the same time on Portal. And as Ivy Li mentioned that all SRM IViews have system alias as SAP_SRM which points to 1 system at a time . Now as per your saying twins SRM system with unique portal which will also create a problem as most of the time the portal navigation would be locked.Now again while uploading the WDA package for SRM portal your data's might get effect if you are showing your actual data in your training session. If you find then there could be many reasons.
Regards
Gaurav Gautam

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Multiple Discovery Systems on the same network

Is anybody successfully running more than one DS on the same network? We have edited the hostname of the DS but their still seems to be a conflict between the two servers and the SID names cannot be the same as well.

Hi Phillip,
The changing of the hostname is not recommended by SAP, but there is a customer who succeeded in doing so and claims to have even connected 4 Discovery Systems to the same network.
Knowing Maxim, I believe he indeed achieved it.
Read his blog: /people/maxim.efimov2/blog/2007/05/07/how-to-change-hostname-on-sap-enterprise-soa-discovery-system
My only tip: make a backup of the systems before you make any significant changes.
Regards,
Itai

How to connect to the multiple system in the same environment

Hi Everyone ,
We are integrating SAP EP and BOE . We are facing SSO problem ,as there are 2 system in same environment .
Suppose we have XX1 and XX2 as BW backend system . IF Default entry on server is kept blank then we get :
"u2022 Account information not recognized: No SAP system was passed as part of the user name and there was no default system defined. User credential validation cannot continue. " error.
Whereas if we give XX1 as defaut system on server , then SSO is not happening we as are XX2 users .
Anyone has any idea on how to connect to multiple backend system in the same environment .
Edited by: shivani mishra on May 20, 2010 11:22 AM

Hi,
As you can see in the help link below:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2f873d1ca96d7be10000000a114a6b/content.htm
There is a trust system and the trusted systems. One system can trust in many other systems. You have just to configure it exporting and importing the certificates as explained in the link.

Can IDoc sender and receive system be the same client?

thanks.
I think one client can't assign to two logical system.so?

Can IDoc sender and receive system be the same client?
yes
Regards,
Prateek

LMDB - SLD "Source and target system have the same object server name"

Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AM

problem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph

Two SAP systems in the same host "no files processing"

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
How can I set up this issue?
Thank you very much
regards
Thank you very much
regards

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
How can I set up this issue?
Thank you very much
regards
Thank you very much
regards

I have 3 systems with the same issue (BSDOD) Event ID 41

I have 3 systems with the same issue that 1 to 4 times a day it crashes. This is on a VM complex running Win2K8 SR2.
I say many Symbol search path issues and fixed that on the system that can see internet (others are behind BSO Firewall)
Now I am down to the last issue with this first server W2K8.
If anyone cal help me it would really make my day...............
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
OK
C:\Windows\Minidump
0: kd> !analyze -v
*                        Bugcheck Analysis
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffffa7f0ee7a410, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88000e0b9ec, address which referenced memory
Debugging Details:
READ_ADDRESS: fffffa7f0ee7a410
CURRENT_IRQL: 2
FAULTING_IP:
NETIO!FreeMatchBufListInternal+1c
fffff880`00e0b9ec 488b5910        mov     rbx,qword ptr [rcx+10h]
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff880021d8990 -- (.trap 0xfffff880021d8990)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa7f0ee7a400
rdx=0000000000000002 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000e0b9ec rsp=fffff880021d8b20 rbp=fffffa800cd199b8
r8=00000000000017e8 r9=00000000000000d0 r10=fffff80001603000
r11=0000000000000099 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
NETIO!FreeMatchBufListInternal+0x1c:
fffff880`00e0b9ec 488b5910        mov     rbx,qword ptr [rcx+10h] ds:fffffa7f`0ee7a410=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80001678169 to fffff80001678bc0
STACK_TEXT:
fffff880`021d8848 fffff800`01678169 : 00000000`0000000a fffffa7f`0ee7a410 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`021d8850 fffff800`01676de0 : fffffa80`0d6cdc50 fffff880`010d8ba0 00000000`00000000 fffffa80`0ec7a170 : nt!KiBugCheckDispatch+0x69
fffff880`021d8990 fffff880`00e0b9ec : fffffa80`0f173cf0 fffffa80`0cd199b8 00000000`48706657 fffffa80`0cd199b8 : nt!KiPageFault+0x260
fffff880`021d8b20 fffff880`00e150f3 : fffffa80`0ec7a170 fffffa80`0cd199b8 00000000`00000011 fffffa80`0cd199b8 : NETIO!FreeMatchBufListInternal+0x1c
fffff880`021d8b50 fffff880`00e13f9d : fffffa80`0ec7a190 00000000`00000000 fffff880`021d8c30 fffff880`00e9273f : NETIO!FreeCacheEntry+0xa3
fffff880`021d8b90 fffff880`00e15176 : fffff880`021d8c30 00000000`00000000 fffffa80`0cd82660 fffffa80`0cd199b8 : NETIO!FreeSomeCacheBucketEntries+0x6d
fffff880`021d8be0 fffff880`00e1e221 : 00000000`0000000c fffffa80`0cd82660 fffffa80`0c020004 fffffa80`0cd82660 : NETIO!FreeSomeCacheEntries+0x36
fffff880`021d8c10 fffff880`00e073de : fffffa80`0f000003 fffffa80`0f173cf0 fffffa80`0cd82660 fffffa80`0f173cf0 : NETIO! ?? ::FNODOBFM::`string'+0x7a46
fffff880`021d8c50 fffff800`0196fc93 : 00000000`00000001 00000000`00000001 fffffa80`0f173cf0 fffffa80`0cd82660 : NETIO!TickWorker+0xe
fffff880`021d8c80 fffff800`01682261 : fffff800`0181e200 fffff800`0196fc01 fffffa80`0cd82600 fffff800`0181e2d8 : nt!IopProcessWorkItem+0x23
fffff880`021d8cb0 fffff800`0191473a : 498b4809`75c43b41 fffffa80`0cd82660 00000000`00000080 fffffa80`0cd78740 : nt!ExpWorkerThread+0x111
fffff880`021d8d40 fffff800`016698e6 : fffff880`0205d180 fffffa80`0cd82660 fffffa80`0cd83660 ffffff33`e9ed75cd : nt!PspSystemThreadStartup+0x5a
fffff880`021d8d80 00000000`00000000 : fffff880`021d9000 fffff880`021d3000 fffff880`021d89e0 00000000`00000000 : nt!KxStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!FreeMatchBufListInternal+1c
fffff880`00e0b9ec 488b5910        mov     rbx,qword ptr [rcx+10h]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: NETIO!FreeMatchBufListInternal+1c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 5294760d
FAILURE_BUCKET_ID: X64_0xD1_NETIO!FreeMatchBufListInternal+1c
BUCKET_ID: X64_0xD1_NETIO!FreeMatchBufListInternal+1c
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xd1_netio!freematchbuflistinternal+1c
FAILURE_ID_HASH: {4f4b2cba-a197-a425-b97a-8f7cbfbac87f}
Followup: MachineOwner

GWD
This does not surprise me at all. These were/are related to your Symantec. IMHO it is bloatware and after doing 10,000+ BSODS I have seem it more than any other malware app I would remove it and use MSE in its place
Symantec is a frequent cause of BSOD's.
I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN
http://www.microsoft.com/security_essentials/
For Norton 360 use this http://symantec.pcperformancetools.com/norton-360-how-to-uninstall.html
Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\Minidump\102714-47923-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: Server, suite: Enterprise TerminalServer SingleUserTS
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`0165e000 PsLoadedModuleList = 0xfffff800`018a1890
Debug session time: Mon Oct 27 05:05:39.635 2014 (UTC - 4:00)
System Uptime: 1 days 4:50:11.507
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck C5, {8, 2, 1, fffff80001808147}
*** WARNING: Unable to verify timestamp for SYMEFA64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMEFA64.SYS ( SYMEFA64+27c5 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_CORRUPTED_EXPOOL (c5)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is
caused by drivers that have corrupted the system pool. Run the driver
verifier against any new (or suspect) drivers, and if that doesn't turn up
the culprit, then use gflags to enable special pool.
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff80001808147, address which referenced memory
Debugging Details:
BUGCHECK_STR: 0xC5_2
CURRENT_IRQL: 2
FAULTING_IP:
nt!ExAllocatePoolWithTag+537
fffff800`01808147 48895808 mov qword ptr [rax+8],rbx
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER
PROCESS_NAME: ccSvcHst.exe
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff880069f9580 -- (.trap 0xfffff880069f9580)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800f880f60
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001808147 rsp=fffff880069f9710 rbp=0000000000001000
r8=0000000000000000 r9=fffff80001863770 r10=fffff80001863588
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!ExAllocatePoolWithTag+0x537:
fffff800`01808147 48895808 mov qword ptr [rax+8],rbx ds:00000000`00000008=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800016d3169 to fffff800016d3bc0
STACK_TEXT:
fffff880`069f9438 fffff800`016d3169 : 00000000`0000000a 00000000`00000008 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`069f9440 fffff800`016d1de0 : fffff880`069f9690 fffffa80`0d157d80 fffff880`069f9500 fffff800`01863770 : nt!KiBugCheckDispatch+0x69
fffff880`069f9580 fffff800`01808147 : fffff8a0`078d3140 00000000`00000702 fffffa80`0f95c800 fffff8a0`078d33a8 : nt!KiPageFault+0x260
fffff880`069f9710 fffff880`016bf7c5 : fffff880`00000000 00000000`00000000 fffffa80`0ddc6530 fffff880`00000000 : nt!ExAllocatePoolWithTag+0x537
fffff880`069f9800 fffff880`00000000 : 00000000`00000000 fffffa80`0ddc6530 fffff880`00000000 00000000`00000000 : SYMEFA64+0x27c5
fffff880`069f9808 00000000`00000000 : fffffa80`0ddc6530 fffff880`00000000 00000000`00000000 fffff880`016bf514 : 0xfffff880`00000000
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMEFA64+27c5
fffff880`016bf7c5 ?? ???
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: SYMEFA64+27c5
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMEFA64
IMAGE_NAME: SYMEFA64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 530fcaf7
FAILURE_BUCKET_ID: X64_0xC5_2_SYMEFA64+27c5
BUCKET_ID: X64_0xC5_2_SYMEFA64+27c5
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xc5_2_symefa64+27c5
FAILURE_ID_HASH: {c40fe135-4c88-ce5c-c7b0-361d3927c5c6}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Two applications systems with the same DB

Hi,
is it possible to have two Oracle applications systems on the same DB ? I mean for exemple two e-business suites (Oracle applications) each one with a different instance of the same database ( DB version 9i and OA version 11.5.9).
Many thanks before.

Not possible,certified or supported,anyways you cannot have two SIDs for the same DB can you?
Sam
http://www.appsdbablog.com

How do I setup RFC if Solution Manager and Target system are in same server

Dear Experts,
How do I setup RFC if the Solution Manager and the Target System (SAP ERP 6.0) are sitting in the same server?
Do I really need to setup RFC?
regards,
Abraham

Hello,
An RFC is a Remote Function Call and is used to communicate between computer systems.
A system can be on a server. Multiple systems can be on a single server, a single system can exist on multiple servers.
When you setup the RFC Target it is the Host and not the system that is specified.
You can get the host information when logged into the ERP system by running transaction SM59.
This would then be the target Host in the RFC from Solman to the ERP system.
As Miguel suggested this is rather simple. So I hope this has shone a light for you so you may proceed.
But if you continue to have problems please advise.
Regards,
Paul

Can i copy all my itunes content exactly the same to another pc?

Can i copy all my itunes content exactly the same to another pc? my itunes library in my office is diff from my personal pc, like all songs i had had album artwork and its been organizd already.

See also Recover your iTunes library from your iPod or iOS device.
tt2

Create dev and test instances of Apex on the same server and database

I have a dev and prod instances of Apex on different servers. I want a test instance on the same server as the dev instance.
I am using workspace export/import so all instance workspaces have the same workspace id. The application ID is the same on each instance, in the same workspace. This allows pages to be exported/imported in the differenct instances.
My question is (I am sure it is obvious) can I have more than one instances of Apex on the same database (dev and test) and have each instance have identical Workspace IDs, etc.
Sam

Hi Sam,
But you can have more than one database on the same server.
What we do is create a separate database for each APEX versions we are supporting (we still have a customer using APEX 2.0).
All the databases are accessed with the same APACHE config. All you have to do is change the DAD and have a separate dad for each database (i.e. each APEX versions).
ex : /pls/apex_dev /pls/apex_test
This way , I can run different APEX versions on the same server.
Francis.
http://insum-apex.blogspot.com/

HT204053 what if i change to new iphone can the apps & contacts been copied to my new devise use the same icloud/apple id?

what if i change to new iphone can the apps & contacts been copied to my new devise use the same icloud/apple id?

Yes, they can ... best way ist to backup your current device with iTunes and setting up the new iPhone from this backup ... iTunes will ask you this when you connect your new one for the first time ...

System copy of a DEV system on the same server

Similar Messages

Maybe you are looking for