System Copy of an NWDI
Hello,
I am in the process of migration several SAP landscapes from one datacenter to another.
The migration of R/3, CRM etc. are straightforward. Now we would also have to
copy the NWDI from the old data center to the new one in order to test all these
copied systems.
However, SAP note 877029 has some very annoying remarks regarding NWDI system copies:
IMPORTANT:
CBS and CMS do NOT support the COPY option. This means after the System
Copy migration was done you are not allowed to use the CBS and CMS in the
source system anymore. If the COPY option is selected only for DTR a COPY
is done, for CBS and CMS only a MOVE is done.
How are we supposed to test the relocation of the NWDI from datacenter A to datacenter B?
Is there only a final migration possible, but no test migration of a NWDI?
Why can't we COPY the DTR, CBS and CMS to datacenter B and use these
copies together with all the other copied AS ABAP / AS JAVA instances?
Regards,
Mark
Hi Mark,
Please check this thread: duplicate NWDI
I think it answers your question..
Kind regards,
Mark
Similar Messages
-
Dear All,
We have copied our NWDI system ( NW04s Java SP08) to a new host, while doing the post install steps we are facing numerous errors.
Changing the Domian data went fine. But when we try to update the urls in indivudual tracks we get CBS communication failure error. As mentioned in the system copy guide we changed the Idle start value of the CBS to true through visual admin and then tried but still the error remains the same. How to correct the error ?
And is there any way to do a NWDI refresh i.e delete everything that is existing including the tracks and configure the NWDI from scratch.
Please advice
Warm Regards
Mazduli read note 145029 on the same problem which says i should copy CONPUTTB.TAB to BIN folder of Upgrade directory, but i am not sure i have upgrade directory in my system as there is no any PUT directory inside folder 'USR\SAP' as said in upgrade guide. is it because i build a system from an export image of the upgraded system? And will i be able to do it only on the Main system (on which upgrade was perform).
I seen a tcode SRTT0 which generate PUTTB entries but it did not generate for me?
any comment would be appreciated.
As suggested i allready opened up message with SAP for the same will let know result once i finished it.
Mani -
Hi Experts,
In the system-copy guides as well as in this document::
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70ee5ab2-8d7a-2c10-d88b-dbe2fdf666e7?quicklink=index&overridelayout=true
will be explained how to copy a NWDI-system with system tools, but where I could found this tools and how I could start this ?
With sapinst ?
Any ideas ?
Regards,
AlessandroHi Alessandro,
There are basically two ways to perform this:
- Install a new NWDI system, replicate the DTR's and imported them into the newly installed system
- Move the entire NWDI system by using the homogeneous system copy procedure
Hope this clarifies it a bit..
Kind regards,
Mark -
NWDI System Copy or Fresh Installation ?
Hi All,
We have a requirement where our NWDI Service on DomainA has to be copied to DomainB on different network.
Importanly both the NWDI servers should be operational individually after the copy.
I was going through the NWDI System copy document, it says after Copy, source system will not be used further
I need expert advice on what is recommended. System Copy or Fresh installation ?
If its fresh installation, how can we move from Source System to Destination on different networks ?
Regards
SreeramSreeram Kasturi wrote:
> If its fresh installation, how can we move from Source System to Destination on different networks ?
>
> Regards
> Sreeram
You can replicate your tracks from one NWDI to another NWDI
http://help.sap.com/saphelp_nw70/helpdata/en/46/5d032c1e661cbee10000000a11466f/frameset.htm -
SLD & NWDI Hetergeneous system copy
Hello,
1. I want to perform a SLD and NWDI hetergeneous system copy from SUN to AIX.
2. If anyone has performed can you share your experience and documents.
3. SLD and NWDI are on seperate servers.
Regards
DeepakThanks Michael,
I was able to change the CIM settings and then the SLD data shown in portal (content management > Webdynpro) also changed.
But that red message in the bottom of the VA still exists whenever i select SLD Data Supplier service.
How do i rectify this?
I also trigerred an SLD Datatransfer with success. But still after that also I see the same Red message :" SLD Data collector task "
Points are awarded for your help.
Thanks,
Jimmy -
SWPM - System Copy - Assertion Failed Unable to load database
Hello again,
(already the next question form me, sorry for this
I am executing a sysetm copy (DB-refresh) on ASE using SWPM.
However, in "Configure Components" step I get the error: Assertion failed. Unable to load database <SID of Target Sysetm>.
Where else can I check for errors?
I think it is still something on which I already worked (with other thread).
In sapinst_dev.log I found this
TRACE 2015-03-25 11:05:00.320
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2015-03-25 11:05:06.122 [iaxxgenimp.cpp:638]
CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> <p> An error occurred while processing option <i>SAP Enhancement Package 1 for SAP N
etWeaver 7.3 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or M
ove( Last error reported by the step: Assertion failed: Unable to load database <SID>.)</i>. You can now: </p> <ul>
<li> Choose <i>Retry</i><br>to repeat the current step. </li> <li> Choose <i>Log Files</i><br>to get more inform
ation about the error. </li> <li> Stop the option and continue later. </li> </ul> <p> Log files are written to /t
mp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF. </p> </body></html>
TRACE 2015-03-25 11:05:06.124 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
In sapinst.log I found this:
ERROR 2015-03-25 11:04:59.573
FCO-00011 The step syb_step_setup_preload with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind
|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_S
YB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_setup_preload was executed with status ERROR ( Last error reporte
d by the step: Assertion failed: Unable to load database <SID>.).
INFO 2015-03-25 11:04:59.772
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/__instana_tmp.xml.
INFO 2015-03-25 11:05:00.307
Removed file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.
INFO 2015-03-25 11:05:00.308
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.Hello Kiran,
I did a few tests again yesterday, and it was really a stupid mistake from myside.
The error message did mean, that there wasn't enough space.
It isn't the authority issue, it was a leak of space.
FYI, the complete DB-Size of Source System is required - NOT JUST RESERVED SPACE!!!
Thx for help and sorry for stealing your time :O -
Hi Supports,
I am using sapinst homogeneous system copy in Linux on sybase.
I stuck on the the step 27/49 "create Database".
I checked Firewall is off.
i got points in my sapinst_dev.log that "
1)The log segment in the target database 'SID' is too small (9216 MB) to accommodate the log segment from the dumped database (10240 MB)"
and
2)"Can't change the owner of the master, model, tempdb or sybsystemprocs database"
Do i need to increase "sybase/SID/saplog_1" ? because my "saplog_1" is 49 mb now.
if it is ! how do i increase in this stage.
can any one know about this error???
Thanks,
Aziz.Hi,
When i seen SID.log file so its showing deadlock and checkpoint occurring,
Is any solution ???
Is this because of networks?
we had 2 servers on this same IP. but i stopped one server and one is still running.
please find my SID.log file and revert back if any soltion.
==========================================================
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.03.21 12:12:31 =~=~=~=~=~=~=~=~=~=~=~=
ibssrv02:/sybase/IB1/ASE-15_0/install #
ibssrv02:/sybase/IB1/ASE-15_0/install # lscd ASE-15_0/install/lscd IB1lscd /IB1sybase/df -hexitsu - sybib1lscd IB1ls
IB1.log IB1_BS.log IB1_JSAGENT.log RUN_IB1 RUN_IB1_BS auditinit setperm_all showserver startserver sybhauser veritas
ibssrv02:/sybase/IB1/ASE-15_0/install # more IB1.log
00:0000:00000:00000:2014/03/21 11:03:36.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Performing space allocation for device '/sybase/IB1/sybsystem/master.dat' (0.39 Gb). This may take some time.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Finished initialization.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:38.32 server Configuration Error: Configuration file, '/sybase/IB1/IB1.cfg', does not exist.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: A configuration file was not specified or the default file '/sybase/IB1/IB1.cfg' does not exist. ASE creates
the default file.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: Using default file '/sybase/IB1/IB1.cfg' since a configuration file was not specified. Specify a configurati
on file name in the RUNSERVER file to avoid this message.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Unpublished rights reserved under U.S. c 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1718]: executing SQL statement ("update master.dbo.sysusages set loc..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1731]: executing SQL statement ("begin declare @val int select @val=..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model' does not exist. ASE will create it.
--More--(11%)
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model': beginning upgrade step [ID 1]: Initialize disk and create empty allocation units on master devi
ce.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID 2]: Bootstrap basic system catalogs in database.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID 6]: creating index (table syspartitions, index ncsyspartitions)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 8]: creating index (table systypes, index ncsystypes)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 10]: creating index (table sysobjects, index ncsysobjects)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 13]: creating table (table systabstats)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 26]: creating table (table sysprocedures)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 27]: creating table (table syscomments)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 28]: creating table (table syssegments)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 29]: creating table (table sysprotects)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 30]: creating table (table sysusers)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 31]: creating table (table sysalternates)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 32]: creating table (table sysdepends)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 33]: creating table (table syskeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 47]: creating table (table syspartitionkeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 51]: creating table (table sysreferences)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 52]: creating table (table sysconstraints)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 53]: creating table (table sysusermessages)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 54]: creating table (table systhresholds)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 55]: creating table (table sysroles)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 56]: creating table (table sysslices)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 60]: creating table (table sysstatistics)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 61]: creating table (table sysxtypes)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 62]: creating table (table sysjars)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 65]: creating table (table sysqueryplans)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 68]: creating table (table sysencryptkeys)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 73]: executing SQL statement ("update sysobjects set sysstat = sys...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 74]: executing SQL statement ("update syscolumns set type=66, user...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 80]: creating table (table sysattributes)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID 82]: creating table (table sysdams)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID 90]: insert basic data into bootstrap system tables
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 91]: executing SQL statement ("update systypes set length=@@maxpag...
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 245]: Update system roles in system tables.
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 248]: update system catalog protection data
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 606]: executing SQL statement ("select lct_admin('lastchance', db_i...
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1126]: Initialize systabstats with valid statistics
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1131]: Creating/Updating the last chance threshold for logsegment.
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1274]: executing SQL statement ("declare @dummy int")
--More--(13%)
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1241]: executing SQL statement ("insert into sysattributes (class, a...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1400]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1411]: executing SQL statement ("if not exists (select 1 from master...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1416]: executing SQL statement ("update sysroles set id=11 from sysu...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1502]: executing SQL statement ("if exists (select 1 from sysobjects...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1503]: executing SQL statement ("create view sysquerymetrics (uid, g...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1505]: executing SQL statement ("update sysattributes set char_value...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1550]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1554]: upgrade simulated statistics
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1564]: executing SQL statement ("declare @dbid int select @dbid = db...
00:0006:00000:00001:2014/03/21 11:03:39.93 server Database 'model': beginning upgrade step [ID 1650]: executing SQL statement ("dbcc upgd_grantrev_sysrole_perms('g...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1651]: updating builtin permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1652]: adding generic user 'usedb_user' to sysusers
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1653]: updating DBCC command permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server CREATE DATABASE: allocating 1536 logical pages (24.0 megabytes) on disk 'master' (1536 logical pages requested).
00:0006:00000:00001:2014/03/21 11:03:39.97 server Warning: The database 'sybsystemdb' is using an unsafe virtual device 'master'. The recovery of this database can not
be guaranteed.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x000013b4).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database sybsystemdb successfully created.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb', checkpoint=(864, 64), first=(864, 64), last=(864, 150).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 86.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Redo pass of recovery has processed 2 committed and 0 aborted transactions.
--More--(15%)
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x00001416).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Boot Count: 1
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Now loading ASE's new default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
--More--(17%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
--More--(18%)
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
--More--(20%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
--More--(21%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdatabases' (object ID 30): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdatabases_30' (partition ID 30) of table 'sysdatabases'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syslogins' (object ID 33): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syslogins_33' (partition ID 33) of table 'syslogins'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdevices' (object ID 35): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdevices_35' (partition ID 35) of table 'sysdevices'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysconfigures' (object ID 37): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysconfigures_37' (partition ID 37) of table 'sysconfigures'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysservers' (object ID 40): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysservers_40' (partition ID 40) of table 'sysservers'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysremotelogins' (object ID 41): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysremotelogins_41' (partition ID 41) of table 'sysremotelogins'. The logical page size of this t
able is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
--More--(23%)
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syscharsets' (object ID 45): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syscharsets_45' (partition ID 45) of table 'syscharsets'. The logical page size of this table is
16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysresourcelimits' (object ID 52): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysresourcelimits_52' (partition ID 52) of table 'sysresourcelimits'. The logical page size of th
is table is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Default Sort Order successfully changed.
00:0006:00000:00001:2014/03/21 11:03:40.01 server ASE shutdown after verifying System Indexes.
00:0006:00000:00001:2014/03/21 11:03:40.01 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:03:40.01 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.06 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.21 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:40.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Unpublished rights reserved under U.S. copyright laws.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel This software contains confidential and trade secret information of Sybase,
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Inc. Use, duplication or disclosure of the software and documentation by
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel the U.S. Government is subject to restrictions set forth in a license
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement between the Government and Sybase, Inc. or other written
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement specifying the Government's rights to use the software and any
--More--(24%)
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel applicable FAR provisions, for example, FAR 52.227-19.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using /sybase/IB1 as the 'SYBASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using ASE-15_0 as the 'SYBASE_ASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted on host 'ibssrv02' running Linux release 3.0.13-0.27-default version #1 SMP Wed Feb 15 13:33:49 UTC 2012 (
d73692b).
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using '/sybase/IB1/ASE-15_0/IB1.cfg' for configuration information.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Logging ASE messages in file '/sybase/IB1/ASE-15_0/install/IB1.log'.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Disk Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Ct-Lib Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Platform TCP network support seems IPv4-only.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted with TCP_NODELAY enabled.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network and device connection limit is 4081.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is running as process id 25438.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Number of blocks left for proc headers: 6920.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for each per engine cache.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for engine 0 local cache
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Using value of 'number of engines at startup' (1) for size of syb_default_pool.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 3, "syb_blocking_pool", type="Run To Completion", with 4 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 2, "syb_system_pool", type="Run To Completion", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 1, "syb_default_pool", type="Engine (Multiplexed)", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Aggressive task stealing enabled
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
00:0007:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 2 (NetController) is running as task 1127909376 on thread 7 (LWP 25453).
00:0008:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 3 (DiskController) is running as task 1127910096 on thread 8 (LWP 25454).
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Initializing virtual device 0, '/sybase/IB1/sybsystem/master.dat' with dsync 'off'.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Virtual device 0 started using asynchronous i/o.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Loaded default Unilib conversion handle.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Worker Thread Manager is not enabled for use in ASE.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mec
hanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel libsybibmmq - Sybase IBM MQ interface/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/OPT
/Thu Jun 6 12:02:54 2013
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Loaded encryption provider CSI-2.8M2-linuxamd64-2012/12/27 21:15:59 PST-sybcsi_openssl-OpenSSL 1.0.1b 26 Apr 2012.
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Encryption provider initialization succeeded on engine 0.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel SSL Plus v5.2.2 security modules loaded successfully.
--More--(26%)
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Network and device connection limit is 4081.
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Thread 6 (LWP 25447) of Threadpool syb_default_pool online as engine 0
00:0006:00000:00000:2014/03/21 11:03:41.28 server Active traceflags: 1623
00:0006:00000:00001:2014/03/21 11:03:41.28 kernel libomni1 - Component Integration Services: using 'Sybase Client-Library/15.7/P-EBF21002 SP100/DRV.15.7.0.10/Linux x86
_64/Linux 2.6.18-128.el5 x86_64 Native Threads/BUILD1570-026/64bit/OPT/Wed Mar 20 21:34:36 2013'
00:0006:00000:00001:2014/03/21 11:03:41.28 server Size of the 16K memory pool: 8192 Kb
00:0006:00000:00001:2014/03/21 11:03:41.28 server Opening Master Database ...
00:0006:00000:00001:2014/03/21 11:03:41.29 server Loading ASE's default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:41.29 server Recovering database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Database 'master', checkpoint=(1634, 132), first=(1634, 132), last=(1634, 173).
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database master.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started REDO pass for database 'master'. The total number of log records to process is 42.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Redo pass of recovery has processed 7 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed REDO pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Timestamp for database 'master' is (0x0000, 0x00006ec9).
00:0006:00000:00001:2014/03/21 11:03:41.30 server Recovery of database 'master' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Database 'master' is now online.
00:0006:00000:00001:2014/03/21 11:03:41.30 server The transaction log in the database 'master' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:41.37 server server is unnamed
00:0006:00000:00001:2014/03/21 11:03:42.06 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.001'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb', checkpoint=(864, 170), first=(864, 170), last=(864, 170).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:40.01 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'sybsystemdb' is (0x0000, 0x0000142f).
--More--(28%)
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Boot Count: 2
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.07 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Resident Node id: fb18efb51d00
00:0006:00000:00001:2014/03/21 11:03:42.07 server Transaction coordinator initialized.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'model', checkpoint=(864, 59), first=(864, 59), last=(864, 77).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database model.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'model'. The total number of log records to process is 19.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'model' is (0x0000, 0x000013cb).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'model' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The transaction log in the database 'model' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server Database 'model' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The logical pagesize of the server is 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server 0 dump conditions detected at boot time
00:0006:00000:00001:2014/03/21 11:03:42.08 server Clearing temporary database 'tempdb'.
00:0006:00000:00001:2014/03/21 11:03:42.09 server Tempdb 2 is added to the list of local temporary databases
00:0006:00000:00001:2014/03/21 11:03:42.09 server Timestamp for database 'tempdb' is (0x0000, 0x000013ce).
00:0006:00000:00001:2014/03/21 11:03:42.10 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.10 server Database 'tempdb' is now online.
00:0006:00000:00009:2014/03/21 11:03:42.10 kernel network name ibssrv02, interface IPv4, address 192.168.2.6, type tcp, port 7905, filter NONE
00:0006:00000:00001:2014/03/21 11:03:42.10 server Recovery complete.
--More--(30%)
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default unicode sort order is 'binary'.
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default sort order is:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'bin_iso_1' (ID = 50)
00:0006:00000:00001:2014/03/21 11:03:42.10 server on top of default character set:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'iso_1' (ID = 1).
00:0006:00000:00001:2014/03/21 11:03:42.10 server Master device size: 400 megabytes, or 204800 virtual pages. (A virtual page is 2048 bytes.)
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Warning: Cannot set console to nonblocking mode, switching to blocking mode.
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Console logging is disabled. This is controlled via the 'enable console logging' configuration parameter.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Initializing virtual device 1, '/sybase/IB1/sybsystem/sysprocs.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Virtual device 1 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:03:55.01 server Timestamp for database 'sybsystemprocs' is (0x0000, 0x000013ce).
00:0006:00000:00015:2014/03/21 11:03:55.13 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.002'.
00:0006:00000:00015:2014/03/21 11:03:55.13 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:03:55.14 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.003'.
00:0006:00000:00015:2014/03/21 11:03:55.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.004'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:22.28 server Increase the config parameter 'number of open objects' to avoid descriptor reuse. Reuse may result in performance deg
radation.
00:0006:00000:00015:2014/03/21 11:04:24.34 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.005'.
00:0006:00000:00015:2014/03/21 11:04:24.34 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.006'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:24.89 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.007'.
00:0006:00000:00015:2014/03/21 11:04:24.90 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Initializing virtual device 2, '/sybase/IB1/sybsystem/sybsysdb.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Virtual device 2 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:04:24.95 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.008'.
00:0006:00000:00015:2014/03/21 11:04:24.95 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.009'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Initializing virtual device 3, '/sybase/IB1/sybtemp/tempdbdev.dat' with dsync 'off'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Virtual device 3 started using asynchronous i/o.
00:0006:00000:00018:2014/03/21 11:04:27.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.010'.
--More--(32%)
00:0006:00000:00018:2014/03/21 11:04:27.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.011'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.012'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.013'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00020:2014/03/21 11:04:29.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.014'.
00:0006:00000:00020:2014/03/21 11:04:29.17 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00020:2014/03/21 11:04:29.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.015'.
00:0006:00000:00020:2014/03/21 11:04:29.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.016'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.017'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.018'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.019'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00025:2014/03/21 11:04:35.24 server Shutdown started by user 'sa'. SQL text: shutdown
00:0006:00000:00025:2014/03/21 11:04:35.25 server ASE shutdown by request.
00:0006:00000:00025:2014/03/21 11:04:35.25 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:04:35.25 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.30 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.45 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:04:36.50 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE -
Activating data in DSO got dump SAPSQL_EMPTY_TABNAME after BW system copy
Hi all,
We had an issue after system copy.
After a system copy the data in the standard DSOs(all of them) cannot be activated. The DOSs themselves are active, the transformations are active but if one attempts to load data and activate u2013 it does not work. The job terminates with shortdump SAPSQL_EMPTY_TABNAME.
Found the issue is caused by u201Cmore than one versionu201D of the change log.
We tried the Program RSAR_RSTSODS_CHANGELOG_VRS but it didn't work.
We had the solution like this:
After activating the DSO itself(the object) using RSDG_ODSO_ACTIVATE the issue disappears and the data can be activated. Issue also disappears. BUT Drawback: Activating the DSO causes the transformations to deactivate.Then we used the program RSDG_TRFN_ACTIVATE to activate all transformations. And then the issue disappeared.
Want to know what the root cause for this. From some SDN threads, mentioned BDLS job in the post refresh steps are not correctly done during system copy may cause this issue. How did the BDLS run wrongly cause this issue? And what is the exact correct way? We ran BDLS for each source systems inlcuding the target refreshed BW system itself by the default selection - conversion of Client-Dependent and Client-Independent Tables; because we used database copy
for the system refresh.
We also restored all source systems in RSA1 inlcuding the refreshed BW system own in the post-refresh steps.
Thank you very much for your information and suggestion.
HemingHi Arun, as you say two change log tables it´s strange. In fact in my opinion it´s not right but the problem is that the second change log table appears after executing std SAP report RSDG_ODSO_ACTIVATE in order to be able to activate the DSO. So the solution provided by SAP it works but i´m not sure if the right one. Besides this the original change log table is full of data while the second one is empty... for new loads which are gonna a be filled by the activation process ? I suppose the second one... will this have some impact with the data stored in the first one... not in theory but.... i do not feel confortable with the consequences of this report.
And the most important, it seems that the reason why the DSO and the change log table had problems is due to a some problems or missing steps after executing the BDLS after BW system refresh but nobody can confirm this point...
So, i´ve been able to solve the issue but now i have two change log tables for the same DSO.
Anybody has the same situation after executing the above mentioned SAP std report ?
Regards,
Joaquin Casas Baca-Castex -
PI 7.11 sp6 system copy causes target sys to register with source
Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I could not run the "wizard for post copy" since I'm on 7.11sp6. Yes, I know they "downported" it but I don't have those latest LMtools type packages. Anyway, I'm OK with that.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
RFC 399 unable to connect
I'm certain the user is NOT locked and the password is correct for PILDUSER.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
Also, now my PROD system shows the PIT system as a "non-central adapter engine".
Ughh! I'm totally stuck. I'm not sure what to do.
It's as if the PIT (PI training) system somehow is linked to PIP (PI prod). It's like PIT doesn't think he is his own box...
Any ideas? I'm resisting opening a message because this will be so hard to explain to sap support.
--NICKHi Nick,
We went thru the same issue. Fortunately, it was between Dev to sandbox. I stopped the dev system and changed the exchange profile parameters to sandbox hostname and brought the Dev up to fix the issue.
Prod showing as Non-Central Adapter engine :- Check your Business System in SLD and In CIM Instances in SLD, check your XI Integration server assigned to right Business System.
Note 764176 - Error in XI due to inconsistent SLD contents :- helped me come over PI post step issues.
Thanks,
Arjun -
PI 7.11 sp6 system copy Exchange Profile error code: 399
Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the copy itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
com.sap.rprof.dbprofiles.DBException: RFC call returned an error code: 399
I'm certain the user is NOT locked and the password is correct for PILDUSER. It'll give me a different error if I put the wrong password in, so I know it's hitting my system.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
I see these errors in the default trace and application log:
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND:
No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",
Name="PIT.SystemHome.<traininghostname>"
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="PIT.SystemHome.<traininghostname>"
at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
#2.#2011 11 03 13:49:47:008#0-500#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#7E3832DEA80F002B00000000008700C6#4804850000001902##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#J2EE_GUEST#0##0AFD01D4064C11E1CB5E7E3832DEA80F#0afd01d4064c11e1cb5e7e3832dea80f#0afd01d4064c11e1cb5e7e3832dea80f#0#Application [24]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
#2.#2011 11 03 14:51:18:096#0-500#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
#BC-ESI-WS-JAV#tcesiespsrv#7E3832DEA80F001100000000009A004C#4804850000001385##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####109F6812065511E1BF9C7E3832DEA80F#109f6812065511e1bf9c7e3832dea80f#109f6812065511e1bf9c7e3832dea80f#0#Service Runner [tcesiespsrv]#Plain##
+There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
SLDCHECK shows this:
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
I can't be the first person to run into this.
SO strange that I can actually plug in either my dev/QA or PROD hostname in the "ABAP connection" box and it WILL ACCEPT IT...but then, it registered my training system as a "non central adapter engine". I don't want that.
Any ideas?
Another issue is that the SLD PI information from the PIT system is missing the "Integration Directory". It has the other 5 entries...Adapter Engine, Domain, Integration Repository, Integration Server, RWB.
Thanks for reading this,
NICKHere is the error I get when I try to change the "abap connection" to the correct hostname:
RFC call returned an error code: 399
Stack Trace class com.sap.rprof.dbprofiles.DBException:<br><pre>at com.sap.rprof.dbprofiles.DBProfiles.checkReturn(DBProfiles.java:184) at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:105) at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1378) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:204) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfile(RemoteProfile.java:154) at com.sap.rprof.dbprofiles.ExchangeProfile.getExchangeProfile(ExchangeProfile.java:46) at com.sap.rprof.remoteProfile.webui.ProfileWebTree.<init>(ProfileWebTree.java:24) at com.sap.rprof.remoteProfile.webui.Edit.getWebTree(Edit.java:322) at JEE_jsp_treeexprof_4804850_1319481176000_1319565151782._jspService(JEE_jsp_treeexprof_4804850_1319481176000_1319565151782.java:59) at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:436) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:493) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:399) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:388) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:244) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428) at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247) at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327) </pre> -
Unable to log in to portal after system copy
Good day
I have copied my production portal system to a test system. I am using an ECC Abap system as my user store. The portal start successfully and I am able to access the Visual administrator.
I am however unable to log on to the portal. The error I get is "User authentication error".
Below is an extract from the security log:
#1.5#0011259C05FB0054000002F500001B9800043F56F6157AED#1195542635224#/System/Security/Authentication#sap.com/irj#com.sap.engine.services.security.authentication.logincontext#Guest#0##sapsep.sap.lonmin_SEP_32623050#Guest#af93b280973711dc980a0011259c05fb#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
User: N/A
Authentication Stack: ticket
Login Module Flag Initialize Login Commit Abort Details
com.sap.security.core.server.jaas.EvaluateTicketLoginModule SUFFICIENT ok false false true
com.sap.security.core.server.jaas.CreateTicketLoginModule SUFFICIENT ok false false true
com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule REQUISITE ok true true true
com.sap.security.core.server.jaas.CreateTicketLoginModule REQUISITE ok true exception true null#
#1.5#0011259C05FB0054000002F700001B9800043F56F61580BC#1195542635240#/System/Security/Audit#sap.com/irj#com.sap.security.core.util.SecurityAudit#Guest#0##sapsep.sap.lonmin_SEP_32623050#Guest#af93b280973711dc980a0011259c05fb#SAPEngine_Application_Thread[impl:3]_35##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest | LOGIN.ERROR | null | | Login Method=[default], UserID=[oostw], IP Address=[172.27.2.137], Reason=[Access Denied.]#
Please can someone assist.
Thanks
WilhelmHello!
It looks like your system is configured for ticket authentication. As you did a system copy the SSO-ticket might not be working anymore. If this is the case you need fix the SSO or you need to re-configure your Portal (at least temporarily) to allow other authentication methods (like basic password authentication).
You can configure the order of the authentication methods in VisualAdmin and set the 'levels' (Required/Sufficient/etc.) there as well.
Hope this helps,
Jörg -
Dear All,
Good Day
We are doing a BI Quality System Refresh from our BI Production System.
we are on Windows 2003 R2 Server & Database MS SQL 2005 Server.
We followed the Standard System Copy / Migration (Load Based) Installation method.
We finished the SAP installation positively up to the 13th Phase, while in the "IMPORT ABAP Phase" we are getting the following errors.
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 0, waiting 5, completed 102, failed 10, total 117.
Import Monitor jobs: running 1, waiting 4, completed 102, failed 10, total 117.
Import Monitor jobs: running 2, waiting 3, completed 102, failed 10, total 117.
Import Monitor jobs: running 3, waiting 2, completed 102, failed 10, total 117.
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 103, failed 10, total 117.
Loading of 'SAPDODS_13' import package: OK
Import Monitor jobs: running 1, waiting 2, completed 104, failed 10, total 117.
Loading of 'SAPDODS_6' import package: OK
Import Monitor jobs: running 0, waiting 2, completed 105, failed 10, total 117.
Import Monitor jobs: running 1, waiting 1, completed 105, failed 10, total 117.
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 106, failed 10, total 117.
TRACE 2011-05-01 11:58:56.355
Function setMessageIdOfExceptionMessage: nw.programError
WARNING[E] 2011-05-01 11:58:56.355
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
TRACE 2011-05-01 11:58:56.433 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-05-01 11:58:56.480 [sixxcstepexecute.cpp:950]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
TRACE 2011-05-01 11:58:56.527 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 1 Support Release 1 > Software Life-Cycle Options > System Copy > MS SQL Server > Target System Installation > Central System > Based on AS ABAP > Central System. You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/NW701/LM/COPY/MSS/SYSTEM/CENTRAL/AS-ABAP/. </p> </body></html>
TRACE 2011-05-01 11:58:56.527 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
*" In The importmonitor log "*_
INFO: 2011-05-01 11:57:57 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS_6' import package is successfully completed.
TRACE: 2011-05-01 11:58:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is started.
TRACE: 2011-05-01 11:58:26 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAP0000' import package:
K:\usr\sap\FBQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\Backup\ABAP\DATA\SAP0000.STR "C:\Program Files\sapinst_instdir\NW701\LM\COPY\MSS\SYSTEM\CENTRAL\AS-ABAP\DDLMSS.TPL" SAP0000.TSK MSS -l SAP0000.log -o D
TRACE: 2011-05-01 11:58:26 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAP0000' import package into database:
K:\usr\sap\FBQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -loadprocedure fast
INFO: 2011-05-01 11:58:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
WARNING: 2011-05-01 11:58:56
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2011-05-01 11:58:56
10 error(s) during processing of packages.
INFO: 2011-05-01 11:58:56
Import Monitor is stopped.
Kindly Do the needful.
Thanks in Advance.
Regards,
DeepakDid you execute the report SMIGR_CREATE_DDL on the source system and copied the resulting SQL files to the database dump directory?
Markus -
Error in heterogenous system copy
Hi Guys,
I am getting n error during the import phase in het system copy. I am doing a system copy from AIX 5.3, DB2 UDB 8.1..1.88 FP 9 to Win server 2003 SP1, DB2 UDB 8.1.1.88 FP16.
The following is log from DBMIG.log file
INFO 2008-05-23 17:38:43 CommandFileController SyFileVersionSave:736
Saving original content of file C:\Users\bkdadm\Install\DBMIG.R3S
INFO 2008-05-23 17:38:43 CommandFileController SyFileCopy:676
Copying source file C:\Users\bkdadm\Install\DBMIG.R3S to target
file C:\Users\bkdadm\Install\DBMIG.R3S.3 ...
INFO 2008-05-23 17:38:43 CommandFileController SyPermissionSet:2207
Changing permission for file C:\Users\bkdadm\Install\DBMIG.R3S
from 777 to 666.
INFO 2008-05-23 17:38:44 Main
Preparation successfully completed.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'SAP'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:473
offical host name for 'SAP' is 'SAP.twc.pvt'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:541
host 'SAP' has ip address '192.168.192.35'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:581
offical host name for '192.168.192.35' is 'SAP'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'SAP'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:473
offical host name for 'SAP' is 'SAP.twc.pvt'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:541
host 'SAP' has ip address '192.168.192.35'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:581
offical host name for '192.168.192.35' is 'SAP'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'SAP'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:473
offical host name for 'SAP' is 'SAP.twc.pvt'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:541
host 'SAP' has ip address '192.168.192.35'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:581
offical host name for '192.168.192.35' is 'SAP'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'SAP'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:473
offical host name for 'SAP' is 'SAP.twc.pvt'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:541
host 'SAP' has ip address '192.168.192.35'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:581
offical host name for '192.168.192.35' is 'SAP'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 DefValForKey_OS:0
R3Setup found the share 'SAPLOC' on drive D:.
INFO 2008-05-23 17:39:00 CDSERVERMIG_NT_DB6 InternalColdKeyCheck:0
The CD KERNEL will not be copied.
INFO 2008-05-23 17:39:00 CDSERVERMIG_NT_DB6 InternalColdKeyCheck:0
The CD RDBMS will not be copied.
INFO 2008-05-23 17:39:00 CDSERVERMIG_NT_DB6 InternalColdKeyCheck:0
The CD EXPORT1 will not be copied.
ERROR 2008-05-24 22:33:29 GETDBSIZEKEYS_IND_IND ColdKeyCheck:0
Phase failed.
ERROR 2008-05-24 22:33:29 InstController Action:0
Step GETDBSIZEKEYS_IND_IND could not be performed.
ERROR 2008-05-24 22:33:30 Main
Installation failed.
ERROR 2008-05-24 22:33:30 Main
Installation aborted.
I checked the DBSIZE.TPL file as well it is there with full permissions in the following path
<DRIVE>\<EXPDIR>\DB\DB6\DBSIZE.TPL
Please reply me back
Thank you
Irshad MohammedWhat immediately comes to my eyes is the hostname "SAP" - accordign to the installation documentation neither and instance nor a hostname must be named "SAP"....
Markus -
Import ABAP error in ECC6 system copy targert
Hi Experts,
I am istalling SAP Ecc 6 in System copy targrt, ABAP import fail in 2/87. I got the error Loading of 'SAPDFACT' import package: ERRORImport Monitor jobs.
My OS Windows 2003 64 bit and Oracle 10.2. Please find the log files belo. Please help me to solve this issue
:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -ctf I H:\MVGK IDESBackup-march2010\ABAP\DATA\SAPDFACT.STR C:\Program Files\sapinst_instdir\ERP\LM\COPY\ORA\SYSTEM\CENTRAL\AS\DDLORA.TPL SAPDFACT.TSK ORA -l SAPDFACT.log
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job completed
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "AT220100325020343 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "KENKI "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "KENKI"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 15 Step 7)"
(DB) INFO: /BI0/E0RSTT_C01 created #20100325173245
(IMP) INFO: import of /BI0/E0RSTT_C01 completed (0 rows) #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~0 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~01 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~02 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~04 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~05 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~06 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~07 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~08 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~09 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~10 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~11 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~12 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~13 created #20100325173245
DbSl Trace: Error 1408 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-1408 occurred when executing SQL stmt (parse error offset=57)
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C01~P" ON "/BI0/E0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325173245
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325174158
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "AT220100325020343 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "KENKI "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "KENKI"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 15 Step 7)"
(DB) ERROR: DDL statement failed
(DROP INDEX "/BI0/E0RSTT_C01~P")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 1408 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-1408 occurred when executing SQL stmt (parse error offset=57)
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C01~P" ON "/BI0/E0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325174158
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325180802
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325180808
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325182246
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325182251
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325183259
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325183304
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100326100904
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100326100910
Thanks in Advance
Jose HHi,
You can check the defined enviornment variable using command prompt and System properties.
Open Command Prompt and give "set" command. It will show you active environment variable.
You can also set missing environment variables in system properties.
Start -->Control Panel --> System
On Advanced Tab --> Environment Variables.
After logging to the database if it shows message "Connected to idle instance", that means your database is not started.
Please start the database using below SQL command.
Open Command Prompt
C:\Sqlplus / as sysdba
SQL>startup
Once it says "Database opened", retry SAP installation.
You can also check the database status in SQL prompt using below command:
SQL> select instance_name,status from v$instance;
It must show output like:
INSTANCE_NAME STATUS
<SID> OPEN
Regards.
Rajesh Narkhede -
Error in import abap step while importing system copy.
Hi All,
My colleague had taken System copy of development server, few days back. it was completed successfully,
now we want to restore that system copy, as hardware failed. But when we start the import of system copy,
all ABAP jobs are failing in import abap step, Some DDL statement problem. can u pls help wht to do.
I found in some forums, SMIGR_create_DDL report need to be generated prior to taking system copy, but he
didnt taken tht.
OS: Windows 2003
DB: DB2
Pls find sapinst.log
INFO 2009-10-27 10:43:06.890
Output of C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2009-10-27 10:53:37.125
Execution of the command "C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 63, completed 0, failed 0, total 64.
Import Monitor jobs: running 2, waiting 62, completed 0, failed 0, total 64.
Import Monitor jobs: running 3, waiting 61, completed 0, failed 0, total 64.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 61, completed 0, failed 1, total 64.
Loading of 'D010TAB' import package: ERROR
Import Monitor jobs: running 1, waiting 61, completed 0, failed 2, total 64.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 0, waiting 61, completed 0, failed 3, total 64.
Import Monitor jobs: running 1, waiting 60, completed 0, failed 3, total 64.
Import Monitor jobs: running 2, waiting 59, completed 0, failed 3, total 64.
Import Monitor jobs: running 3, waiting 58, completed 0, failed 3, total 64.
Loading of 'DYNPSOURCE' import package: ERROR
Import Monitor jobs: running 2, waiting 58, completed 0, failed 4, total 64.
Loading of 'SAPAPPL1_4' import package: ERROR
Import Monitor jobs: running 1, waiting 58, completed 0, failed 5, total 64.
Loading of 'SAPAPPL2_2' import package: ERROR
Import Monitor jobs: running 0, waiting 58, completed 0, failed 6, total 64.
Import Monitor jobs: running 1, waiting 57, completed 0, failed 6, total 64.
Import Monitor jobs: running 2, waiting 56, completed 0, failed 6, total 64.
Import Monitor jobs: running 3, waiting 55, completed 0, failed 6, total 64.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 2, waiting 55, completed 0, failed 7, total 64.
Loading of 'SAPSSEXC_9' import package: ERROR
Import Monitor jobs: running 1, waiting 55, completed 0, failed 8, total 64.
Loading of 'SAPSSEXC_8' import package: ERROR
Import Monitor jobs: running 0, waiting 55, completed 0, failed 9, total 64.
Import Monitor jobs: running 1, waiting 54, completed 0, failed 9, total 64.
Import Monitor jobs: running 2, waiting 53, completed 0, failed 9, total 64.
Import Monitor jobs: running 3, waiting 52, completed 0, failed 9, total 64.
Loading of 'SAPAPPL2_6' import package: ERROR
Import Monitor jobs: running 2, waiting 52, completed 0, failed 10, total 64.
Loading of 'SAPAPPL1_3' import package: ERROR
Import Monitor jobs: running 1, waiting 52, completed 0, failed 11, total 64.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 52, completed 0, failed 12, total 64.
Import Monitor jobs: running 1, waiting 51, completed 0, failed 12, total 64.
Import Monitor jobs: running 2, waiting 50, completed 0, failed 12, total 64.
Import Monitor jobs: running 3, waiting 49, completed 0, failed 12, total 64.
Loading of 'D010INC' import package: ERROR
Import Monitor jobs: running 2, waiting 49, completed 0, failed 13, total 64.
Loading of 'SAPAPPL1_2' import package: ERROR
Import Monitor jobs: running 1, waiting 49, completed 0, failed 14, total 64.
Loading of 'SAPAPPL1_7' import package: ERROR
Import Monitor jobs: running 0, waiting 49, completed 0, failed 15, total 64.
Import Monitor jobs: running 1, waiting 48, completed 0, failed 15, total 64.
Import Monitor jobs: running 2, waiting 47, completed 0, failed 15, total 64.
Import Monitor jobs: running 3, waiting 46, completed 0, failed 15, total 64.
Loading of 'SAPSSEXC_2' import package: ERROR
Import Monitor jobs: running 2, waiting 46, completed 0, failed 16, total 64.
Loading of 'DYNPLOAD' import package: ERROR
Import Monitor jobs: running 1, waiting 46, completed 0, failed 17, total 64.
Loading of 'SAPSSEXC_5' import package: ERROR
Import Monitor jobs: running 0, waiting 46, completed 0, failed 18, total 64.
Import Monitor jobs: running 1, waiting 45, completed 0, failed 18, total 64.
Import Monitor jobs: running 2, waiting 44, completed 0, failed 18, total 64.
Import Monitor jobs: running 3, waiting 43, completed 0, failed 18, total 64.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 2, waiting 43, completed 0, failed 19, total 64.
Loading of 'SAPAPPL2_14' import package: ERROR
Import Monitor jobs: running 1, waiting 43, completed 0, failed 20, total 64.
Loading of 'SAPAPPL0_2' import package: ERROR
Import Monitor jobs: running 0, waiting 43, completed 0, failed 21, total 64.
Import Monitor jobs: running 1, waiting 42, completed 0, failed 21, total 64.
Import Monitor jobs: running 2, waiting 41, completed 0, failed 21, total 64.
Import Monitor jobs: running 3, waiting 40, completed 0, failed 21, total 64.
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 2, waiting 40, completed 0, failed 22, total 64.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 1, waiting 40, completed 0, failed 23, total 64.
Loading of 'SAPAPPL2_10' import package: ERROR
Import Monitor jobs: running 0, waiting 40, completed 0, failed 24, total 64.
Import Monitor jobs: running 1, waiting 39, completed 0, failed 24, total 64.
Import Monitor jobs: running 2, waiting 38, completed 0, failed 24, total 64.
Import Monitor jobs: running 3, waiting 37, completed 0, failed 24, total 64.
Loading of 'SAPSSEXC_7' import package: ERROR
Import Monitor jobs: running 2, waiting 37, completed 0, failed 25, total 64.
Loading of 'SAPAPPL0_7' import package: ERROR
Import Monitor jobs: running 1, waiting 37, completed 0, failed 26, total 64.
Loading of 'SAPAPPL0_1' import package: ERROR
Import Monitor jobs: running 0, waiting 37, completed 0, failed 27, total 64.
Import Monitor jobs: running 1, waiting 36, completed 0, failed 27, total 64.
Import Monitor jobs: running 2, waiting 35, completed 0, failed 27, total 64.
Import Monitor jobs: running 3, waiting 34, completed 0, failed 27, total 64.
Loading of 'SAPAPPL2_7' import package: ERROR
Import Monitor jobs: running 2, waiting 34, completed 0, failed 28, total 64.
Loading of 'SAPAPPL2_4' import package: ERROR
Import Monitor jobs: running 1, waiting 34, completed 0, failed 29, total 64.
Loading of 'SAPAPPL1_6' import package: ERROR
Import Monitor jobs: running 0, waiting 34, completed 0, failed 30, total 64.
Import Monitor jobs: running 1, waiting 33, completed 0, failed 30, total 64.
Import Monitor jobs: running 2, waiting 32, completed 0, failed 30, total 64.
Import Monitor jobs: running 3, waiting 31, completed 0, failed 30, total 64.
Loading of 'SAPAPPL0_3' import package: ERROR
Import Monitor jobs: running 2, waiting 31, completed 0, failed 31, total 64.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 1, waiting 31, completed 0, failed 32, total 64.
Loading of 'SAPAPPL0_8' import package: ERROR
Import Monitor jobs: running 0, waiting 31, completed 0, failed 33, total 64.
Import Monitor jobs: running 1, waiting 30, completed 0, failed 33, total 64.
Import Monitor jobs: running 2, waiting 29, completed 0, failed 33, total 64.
Import Monitor jobs: running 3, waiting 28, completed 0, failed 33, total 64.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 2, waiting 28, completed 0, failed 34, total 64.
Loading of 'ENHOBJCONTRACT' import package: ERROR
Import Monitor jobs: running 1, waiting 28, completed 0, failed 35, total 64.
Loading of 'SAPAPPL0_4' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 36, total 64.
Import Monitor jobs: running 1, waiting 27, completed 0, failed 36, total 64.
Import Monitor jobs: running 2, waiting 26, completed 0, failed 36, total 64.
Import Monitor jobs: running 3, waiting 25, completed 0, failed 36, total 64.
Loading of 'SAPSSEXC_1' import package: ERROR
Import Monitor jobs: running 2, waiting 25, completed 0, failed 37, total 64.
Loading of 'SAPSSEXC_6' import package: ERROR
Import Monitor jobs: running 1, waiting 25, completed 0, failed 38, total 64.
Loading of 'SAPAPPL2_8' import package: ERROR
Import Monitor jobs: running 0, waiting 25, completed 0, failed 39, total 64.
Import Monitor jobs: running 1, waiting 24, completed 0, failed 39, total 64.
Import Monitor jobs: running 2, waiting 23, completed 0, failed 39, total 64.
Import Monitor jobs: running 3, waiting 22, completed 0, failed 39, total 64.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 0, failed 40, total 64.
Loading of 'SAPAPPL2_1' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 0, failed 41, total 64.
Loading of 'SAPAPPL1_5' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 0, failed 42, total 64.
Import Monitor jobs: running 1, waiting 21, completed 0, failed 42, total 64.
Import Monitor jobs: running 2, waiting 20, completed 0, failed 42, total 64.
Import Monitor jobs: running 3, waiting 19, completed 0, failed 42, total 64.
Loading of 'REPOTEXT' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 0, failed 43, total 64.
Loading of 'SAPAPPL0_5' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 0, failed 44, total 64.
Loading of 'SAPAPPL2_9' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 0, failed 45, total 64.
Import Monitor jobs: running 1, waiting 18, completed 0, failed 45, total 64.
Import Monitor jobs: running 2, waiting 17, completed 0, failed 45, total 64.
Import Monitor jobs: running 3, waiting 16, completed 0, failed 45, total 64.
Loading of 'SAPSSEXC_10' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 0, failed 46, total 64.
Loading of 'SAPAPPL2_3' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 0, failed 47, total 64.
Loading of 'SAPAPPL0_6' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 0, failed 48, total 64.
Import Monitor jobs: running 1, waiting 15, completed 0, failed 48, total 64.
Import Monitor jobs: running 2, waiting 14, completed 0, failed 48, total 64.
Import Monitor jobs: running 3, waiting 13, completed 0, failed 48, total 64.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 0, failed 49, total 64.
Loading of 'SAPAPPL0_9' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 0, failed 50, total 64.
Loading of 'SAPAPPL2_11' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 0, failed 51, total 64.
Import Monitor jobs: running 1, waiting 12, completed 0, failed 51, total 64.
Import Monitor jobs: running 2, waiting 11, completed 0, failed 51, total 64.
Import Monitor jobs: running 3, waiting 10, completed 0, failed 51, total 64.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 0, failed 52, total 64.
Loading of 'SAPAPPL2_13' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 0, failed 53, total 64.
Loading of 'SAPAPPL2_12' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 0, failed 54, total 64.
Import Monitor jobs: running 1, waiting 9, completed 0, failed 54, total 64.
Import Monitor jobs: running 2, waiting 8, completed 0, failed 54, total 64.
Import Monitor jobs: running 3, waiting 7, completed 0, failed 54, total 64.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 0, failed 55, total 64.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 0, failed 56, total 64.
Loading of 'SAPAPPL1_1' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 0, failed 57, total 64.
Import Monitor jobs: running 1, waiting 6, completed 0, failed 57, total 64.
Import Monitor jobs: running 2, waiting 5, completed 0, failed 57, total 64.
Import Monitor jobs: running 3, waiting 4, completed 0, failed 57, total 64.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 0, failed 58, total 64.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 0, failed 59, total 64.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 0, failed 60, total 64.
Import Monitor jobs: running 1, waiting 3, completed 0, failed 60, total 64.
Import Monitor jobs: running 2, waiting 2, completed 0, failed 60, total 64.
Import Monitor jobs: running 3, waiting 1, completed 0, failed 60, total 64.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 0, failed 61, total 64.
Loading of 'SAPUSER1' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 0, failed 62, total 64.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 0, failed 63, total 64.
ERROR 2009-10-27 10:53:37.125
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2009-10-27 10:53:37.140
FCO-00011 The step runMigrationMonitor with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
Thanks.i checked the DOKCLU log, pls find the log below:
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20091027104307
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#20 $ SAP
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Aug 23 2009 23:42:38
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -k 1gage5M50Dp01eqte1]x3Qa5 -l DOKCLU.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(GSI) INFO: dbname = "ATD "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SERVER"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 23 Step 7)"
(DB) ERROR: DDL statement failed
( DROP TABLE "DOKCLU" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE TABLE "DOKCLU" ( "ID" SAPDB6CHAR(2) DEFAULT ' ' NOT NULL , "OBJECT" SAPDB6CHAR(60) DEFAULT ' ' NOT NULL , "LANGU" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "TYP" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "DOKVERSION" SAPDB6FIXCHAR(4) DEFAULT '0000' NOT NULL , "PAGENO" SMALLINT DEFAULT 0 NOT NULL , "TIMESTMP" SAPDB6CHAR(46) DEFAULT ' ' NOT NULL , "PAGELG" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(3800) FOR BIT DATA ) IN ATD#ES700D INDEX IN ATD#ES700I LONG IN ATD#ES700D )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20091027104307
Thanks
Maybe you are looking for
-
Installing 8.1.7 on RedHat Linux 7.3
Dear All, I have been trying installing Oracle 8.1.7 on Linux 7.3, the OUI proceeds till the "Net 8 Configuration" and hangs. Both netasst and dbassist from command line hang-up. Can any one suggest way out to manually create a DATABASE and TNS Regar
-
Now that iOS 6 is here, how do I update to iOS 5?
I have an iPod Touch 4G (model MC540FD). iOS 6 is now available from iTunes, but for pedagogical purposes, I don't want to update my iPod to iOS 6 for the moment. I just want to update from iOS 4.3.5 to iOS 5. So, I manually downloaded the .ipsw file
-
When you first set up an alarm, the default "15 minutes before" appears. The problem is that the program assumes you are too stupid to remember to put in some number for the alert time. So, it does not allow you to erase both of the displayed digits,
-
My ipod touch 5 wont appear in itunes, what do i do?
It wont pop up on itunes but the scanner and camera wizard pop up what shoul i do ?
-
Purchase Category segment1 value expired! Pls help
Hi all, I wanted to know where do we end date the Segment1 Flexfield component in Purchasing Categories which comes up in PO Entry form. Also I want to know the setup areas on the same field. Actually one of the segment1 in that valueset is expired a