System copy Oracle 10.2 in MSCS

Hi,
we need to move (using system copy) for a old MSCS cluster to new HW MSCS cluster of our NW04s (Abap and Java) + Oracle 10.2.0.2 + Win03 X86.
I would like to use backup/restore method due a very large Oracle database.
OK, I've already move a stand alone system to a MSCS using backup/restore method... but now, into MSCS source system I can't select method of backup/restore export to generare SDM, ecc. jar file to complete system copy on target system.
Is it possible to use a Oracle backup/restore method to copy an existing MSCS to new MSCS ?
Regards.
Ganimede Dignan

Hi,
>there should be no functional difference in systemcopy in MSCS compared to standalone configuration.
>
>because SDM is installed on a local instance you should run the steps on this node where the SDM is >installed on.
I suppose that but during db export on source system we are not be able to flag "use database specifc tools"
http://img510.imageshack.us/img510/2825/12584947li9.gif
(this is a previus hom. system copy based on Oracle backup/restore... but not in MSCS)
We can't see this step and SAPinst jump directly to export path request.
Regards.
Ganimede Dignan.

Similar Messages

System Copy/ Oracle Backup/Restore as part of migrating from 32 to 64-bit

Source system (I386): R3E47 Ext Set 2.00 SAP_BASIS 620 Kernel 640 Windows 2000, Oracle 10.2.0.4, non-unicode
Target system (x86-64/AMD64): R3E47 Ext Set 2.00 SAP_BASIS 620 Kernel 640 Windows 2000 Oracle 10.2.0.4, non-unicode
Am using method System Copy/ Oracle Backup/Restore to migrate from 32 to 64 bit (HOM System Copy).
Actions on source system:
a) Upgrade from 9.2.0.7 to Oracle 10.2.0.4
b) Used ora_br_copy.bat to generate CONTROL.SQL and init<sid>.ora
c) Switched logfiles
d) Performed offline backup
Actions on target system:
a) Installed Oracle 10.2.0.1 and patched it to 10.2.0.4
b) Used CD 51033746 "6.20/6.40 based products Installation Master (Edition May 2008)" to install the CI
c) Started installation of the DB instance selecting System Copy/ Oracle Backup/Restore (same <SID> for source and target systems)
Relevant input parameters used:
Database schema: SAPR3
Database character set: US7ASCII
d) When SAPINST stopped to allow for restoring of datafiles, logs and init<sid.ora>:
- copied datafiles and logs to the usual place
- copied CONTROL.SQL (edited to include utilrp.sql and utlrp.sql for the migration from 32 to 64) to the DB-instance intallation . directory.
- copied generated init<SID>.ora to the <ORACLE_HOME>\database
e) Resumed SAPINST.
David Byrne in a previous post suggested: "check your oracle alert file in case there are errors there you may need to update the word size for the 64bit install. Errors like this in the oracle alert file would suggest that.,
ORA-12012
ORA-06544: PL/SQL: internal error, arguments: [ORA-06544: PL/SQL: internal error, arguments: 56319], [, ], [, ], [, ], [
ORA-06553"
Well, I am getting ORA-06553: PLS-801: internal error [56319] but then my edited CONTROL.SQL (which is mainly a CREATE CONTROLFILE as it would be obtained with a ...BACKUP CONTROLFILE TO TRACE) includes at the end this:
shutdown immediate
startup upgrade
spool utlirp.log
@?/rdbms/admin/utlirp.sql
spool off
Shutdown immediate
Startup
Spool utlrp.log
@?/rdbms/admin/utlrp.sql
Spool off
exit
which is supposed to do just that... (I think)
Help, anyone?

> Trying to cheer me up, are you?
No
> It is NOT free that reorganization! Quite expensive, actually, paid for in time! But you're right... the database needed a reorg anyway :-\
True, not "free" - it takes time but the data will be nicely aligned then
> And why would I have to reconfigure all those 10.2 features? Everything's either in the database or init<sid>.ora, ain't it? And my database is a pretty 10.2.0.4 with all those nice features already activated...
No - not really auotmatically if you upgraded from 9.2 And "init<SID>.ora" is past, you nowadays use "spfile" If, of course, e. g. Automatic Undo was activated in 9.2 then it's there of course in 10.2 too.
> One sticky point... I haven't really read the r3load procedure yet and I will before I import, but... I would say I don't have to do anything about the 32->64 bit, right? I mean, it should behave properly while reloading on 64-bit...
The exported content is about 10 % of the size of the system, it's database and OS independent so yes, you can import it nicely on 32bit. Another tip: make sure you don't just use the default configurations for R3load, it will take a HUGE amount of time. Use the package splitter (builtin-in in sapinst) so you get a much higher parallelism when importing.
Markus

Homogeneous System Copy Oracle procedure in R/3 4.7

Hi all
I want to know that whether I can do a homogeneous system copy oracle procedure in below environment.
SAP R/3 4.7 SR1 with Oracle 9.2.0.5.5 database and on windows 2003 environment.
I have done homogeneous Oracle procedure before on ECC 5.0 with Oracle 9 on windows environment. so I am confident through Oracle procedure.
I have Homogeneous document for SAP Web Application Server
ABAP 6.40 SR1.
But I was not able to find the document for the above environment.
Reply ASAP as I have currently the above R/3 4.7 Environment where I have to do Homogeneous Copy.
Thanks to all.
Regards
Vinay Paul

Hello Vinay,
Yes you can use the DB specific procedure for the homogneous copy of this system.
Please remember that in this environment you should not restore the database until prompted to do so by sapinst.
Regards,
David

BW 3.5 homogeneous system copy/oracle 9.2

Hello
We have an big BW 3.5 system. Like other productive systems which needs to be fully available we would like to perform homogeneous system copy.
In case of ECC system we are doing this procedure of renaming <SID> within Oracle tables on disconnected secondary side(so the productive system is fully functional). Then we connect this database(with renamed <SID> to test system) and perform bdls, TMS management etc....
I wander in this regard BW 3.5 has any major difference which would prevent something like this?

Dear Jan,
BW system copy is little bit different from ECC or other netweaver system copy. Check SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW.
Note 184754 - Procedure after BW database copy
Thanks
Sunny

Homogeneous system copy ABAP with Oracle

Hi!
I'm doing a homog. sys. copy with a CRM 7.0, unicode, on Oracle 10.2 and Windows 2008 64-bit.
I'm doing this copy to the same server as the system was one previously, because the system was not installed correctly.
I have uninstalled the instance the old system and have now started the system copy - target system - central instance and have choosen to restore with database backup.
I've run into some problems with the step Create Instance_oradim.
I get the following error in the SAPinstGui
An error occurred while processing option SAP CRM 7.0 Support Release 1 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System( Last error reported by the step :TypeError: rowPar has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 61644: ???)). You can now:
u2022     Choose Retry to repeat the current step.
u2022     Choose View Log to get more information about the error.
u2022     Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CRM70/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/.
I've retried, but it didn't work
When I look in the sapinst file in C:\Program Files/sapinst_instdir/CRM70/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP I found this error.
|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraOBR|ind|ind|ind|ind|5|0|createInstance_oradim was executed with status ERROR ( Last error reported by the step :TypeError: rowPar has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 61644: ???)).
I also found something that might be an authorization error
FSL-01027 Account user="ORA_DCT_DBA" does not exist.
INFO[E] 2010-08-26 08:59:07.631
FSL-01027 Account user="ORA_DCT_OPER" does not exist
INFO[E] 2010-08-26 08:59:07.741
FSL-01027 Account user="ORA_DBA" does not exist.
rollo

The log
An extract of the log
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production
System parameter file is E:\oracle\DCT\102\network\admin\listener.ora
Log messages written to E:\oracle\DCT\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\DCT.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\DCTipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CRMTEST.europe.com)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DCT.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production
Start Date                26-AUG-2010 08:58:49
Uptime                    0 days 0 hr. 0 min. 5 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\oracle\DCT\102\network\admin\listener.ora
Listener Log File         E:\oracle\DCT\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\DCT.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\DCTipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CRMTEST.europe.com)(PORT=1527)))
Services Summary...
Service "DCT" has 1 instance(s).
Instance "DCT", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2010-08-26 08:58:52.708
Execute step SetListenerModeAuto of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0
INFO 2010-08-26 08:58:54.99
Execute step setLocalDefaultContextParameter of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO 2010-08-26 08:58:54.318
Switched to user: dctadm.
INFO 2010-08-26 08:58:55.740
Execute step checkStepPreconditions of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO 2010-08-26 08:58:57.443
Execute step prepareDirectories of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO 2010-08-26 08:58:57.740
Switched to user: dctadm.
INFO 2010-08-26 08:58:59.146
Execute step installInitSidSap of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO 2010-08-26 08:58:59.459
Switched to user: dctadm.
INFO 2010-08-26 08:58:59.521
Creating file E:\oracle\DCT\102\database\initDCT.sap.
INFO 2010-08-26 08:59:01.162
Execute step installInitSidDba of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO 2010-08-26 08:59:01.318
Copied file 'C:/Program Files/sapinst_instdir/CRM70/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/INITSID.DBA' to 'E:/oracle/DCT/102/database/initDCT.dba'.
INFO 2010-08-26 08:59:03.178
Execute step extractDbaTools of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO 2010-08-26 08:59:05.6
Execute step setPermissions of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO 2010-08-26 08:59:07.241
Execute step SetPermissionsForWindowsDatabaseFolder of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO[E] 2010-08-26 08:59:07.522
FSL-01027 Account user="ORA_DCT_DBA" does not exist.
INFO[E] 2010-08-26 08:59:07.631
FSL-01027 Account user="ORA_DCT_OPER" does not exist.
INFO[E] 2010-08-26 08:59:07.741
FSL-01027 Account user="ORA_DBA" does not exist.
INFO 2010-08-26 08:59:08.960
Execute step SetPermissionsForWindowsOnInitsidstar of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO[E] 2010-08-26 08:59:09.241
FSL-01027 Account user="ORA_DCT_DBA" does not exist.
INFO[E] 2010-08-26 08:59:09.350
FSL-01027 Account user="ORA_DCT_OPER" does not exist.
INFO[E] 2010-08-26 08:59:09.460
FSL-01027 Account user="ORA_DBA" does not exist.
INFO[E] 2010-08-26 08:59:09.788
FSL-01027 Account user="Administrators" does not exist.
INFO[E] 2010-08-26 08:59:09.897
FSL-01027 Account user="Administrators" does not exist.
INFO 2010-08-26 08:59:11.382
Execute step runSapdbaroleSql of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO 2010-08-26 08:59:12.835
Execute step runSapconnroleSql of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraDbaTools|ind|ind|ind|ind|4|0
INFO 2010-08-26 08:59:14.85
Execute step createInstance_oradim of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraOBR|ind|ind|ind|ind|5|0
ERROR 2010-08-26 08:59:16.882
FJS-00003 TypeError: rowPar has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 61644: ???)
ERROR 2010-08-26 08:59:19.836
FCO-00011 The step createInstance_oradim with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraOBR|ind|ind|ind|ind|5|0|createInstance_oradim was executed with status ERROR ( Last error reported by the step :TypeError: rowPar has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 61644: ???)).
INFO 2010-08-26 08:59:47.510
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraOBR|ind|ind|ind|ind|5|0|createInstance_oradim".
ERROR 2010-08-26 08:59:50.463
FJS-00003 TypeError: rowPar has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 61644: ???)
ERROR 2010-08-26 08:59:53.416
FCO-00011 The step createInstance_oradim with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBOBR|ind|ind|ind|ind|1|0|NW_OraOBR|ind|ind|ind|ind|5|0|createInstance_oradim was executed with status ERROR ( Last error reported by the step :TypeError: rowPar has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 61644: ???)).
WARNING 2010-08-26 09:21:55.346
SAPinst terminated by SIGINT (Ctrl+C)
INFO 2010-08-26 09:21:55.346
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
INFO 2010-08-26 09:21:56.221
Creating file C:\Program Files\sapinst_instdir\CRM70\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.

Error in "Run Java migration toolkit", doing a SAP system copy.

Hi all,
Migration to new hardware with system copy, get an error in CI installation on "Run Java Migration Toolkit".
From the sapinst.log:
ERROR 2009-05-13 12:46:47.188
FJS-00003 TypeError: ci.getInstanceDir() has no properties (in script NW_Doublestack_CI|ind|ind|ind|ind, line 120276: ???)
ERROR 2009-05-13 12:46:48.318
FCO-00011 The step InitPrivateContext with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|InitPrivateContext was executed with status ERROR .
From the sapinst_dev.log:
ERROR 2009-05-13 12:46:47.188 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: ci.getInstanceDir() has no properties (in script NW_Doublestack_CI|ind|ind|ind|ind, line 120276: ???)
TRACE 2009-05-13 12:46:48.038 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 23620
ERROR 2009-05-13 12:46:48.318 [sixxcstepexecute.cpp:951]
FCO-00011 The step InitPrivateContext with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|InitPrivateContext was executed with status ERROR .
TRACE 2009-05-13 12:46:48.368 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > High-Availability System > Based on AS ABAP and AS Java > Central Instance . You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/HA/AS/CI. </body></html>
TRACE 2009-05-13 12:46:48.368 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
I had checked the INSTANCE_NAME parameter, in every profile, and is ok.
I tried a new instalation, after importing the profiles, and checking the INSTANCE_NAME, but got the same error.
Please, advice.
Thanks in advance.
Best Regards.
Jorge

Thanks Manoj for your advice.
We had already checked the procedures, we are working based on the System Copy Guide: "System Copy for SAP Systems Based on SAP NetWeaver 7.0 SR3 ABAP+Java".
I had to mention that source and target systems are HP-UX, 11.23, Itanium and the DataBase is Oracle 10.2.02.
The copy was made from a Central System (ABAP + Java) to a High-Availability System (ABAP + Java), and the problem appeared when copying the Central Instance.
Thanks in adavance.
Regards.
Jorge

"System copy stops in "check DDIC password" step

Hi,
We performed a combined upgrade/unicode conversion to ECC5.0 Non-Unicode to ECC 6.0 Unicode ( Windows 2003 Server, Oracle 10gR2 ).
But at the end of import ( using R3load tool ), the import stops at "check DDIC password" step with error message :
"Test logon to SAP System D12 failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
We checked the system, it's online , and the user DDIC exists. But we could not logon using sapgui. it gives message :
"Programm SAPMS380 not found"
If any one could help
thank you
Pascal
file sapinst_dev.log :
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:13:39.460 [iaxxclogintimeout.cpp:92]
 CLoginTimeout::run()
Login in progress
TRACE 2008-10-06 12:13:39.460
Connection request to guiengine backend by host 10.90.150.140
TRACE 2008-10-06 12:13:39.460 [iaxxgenimp.cpp:471]
 CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE 2008-10-06 12:13:39.475 [iaxxgenimp.cpp:490]
 CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation Master</title>
<dialog/>
TRACE 2008-10-06 12:13:39.522
Protocol version is 3.1
TRACE 2008-10-06 12:13:39.522
Send connect information
TRACE 2008-10-06 12:13:39.522
client logged on
TRACE 2008-10-06 12:13:39.803 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:03.131 [iaxxdlghnd.cpp:96]
 CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2008-10-06 12:14:03.131 [iaxxcdialogdoc.cpp:212]
 CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO 2008-10-06 12:14:03.147 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
INFO 2008-10-06 12:14:03.147 [synxcfile.cpp:177]
 CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:471]
 CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:490]
 CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:05.522
current working directory is C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/
INFO 2008-10-06 12:14:05.522 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2008-10-06 12:14:05.522 [synxcfile.cpp:177]
 CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\x.
TRACE 2008-10-06 12:14:06.553
Running with toplevel file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//toplevel.xml
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:14:06.741
Running with dialog file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//dialog.xml
TRACE 2008-10-06 12:14:06.881
Running with keydb file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//keydb.xml
TRACE 2008-10-06 12:14:07.194 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml
INFO 2008-10-06 12:14:07.209 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml'.
TRACE 2008-10-06 12:14:08.709 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml
INFO 2008-10-06 12:14:08.725 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml'.
TRACE 2008-10-06 12:14:17.928
SAPinst was started using commandline: G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214\sapinst.exe
TRACE 2008-10-06 12:14:17.928
SAPinst properties are :
GUISERVER_DIALOG_PORT=21212
GUISERVER_HTTP_PORT=4239
SAPINST_CONTROL_URL=control.xml
SAPINST_DIALOG_PORT=21200
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,SMDAgent
SAPINST_KEYDB_URL=keydb.xml
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_URL=.
SAPINST_PACKAGES_URL=packages.xml
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SKIP_DIALOGS=false
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=true
TRACE 2008-10-06 12:14:17.959 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaejs701.dll
TRACE 2008-10-06 12:14:18.69 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iacdlib701.dll
TRACE 2008-10-06 12:14:18.162 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaccdlib.dll
WARNING 2008-10-06 12:14:18.162 [synxcpath.cpp:912]
 CSyPath::getOSNodeType(bool )
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
TRACE 2008-10-06 12:14:18.225 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iapasswdman701.dll
TRACE 2008-10-06 12:14:18.225
This is SAPinst, version 701, make variant 700_REL, build 967243
compiled on Mar 7 2008, 01:01:19
TRACE 2008-10-06 12:14:18.350 [synxcaccmg.cpp:640]
 CSyADsPath::fromString(ONEPNET\d12adm)
Account ONEPNET/d12adm has ADS path 'WinNT://ONEPNET/d12adm'
TRACE 2008-10-06 12:14:18.428 [synxcaccnt.cpp:967]
 iastring CSyAccountImpl::getSID(IUnknown* pUnk) const
d12adm has SID S-1-5-21-770850386-355409785-620655208-35637
TRACE 2008-10-06 12:14:20.678 [synxcuser.cpp:1076]
 CSyUserImpl::isExistingOnOS()
existence check for user d12adm returned true.
TRACE 2008-10-06 12:14:20.678 [syxxccache.cpp:208]
 CSyAccountCache::getUserImpl(name="ONEPNET\d12adm", sid="", create=false, ISyProgressObserver* )
inserted account (d12adm, S-1-5-21-770850386-355409785-620655208-35637, USER) into the accountcache.
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:175]
 syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
 = C:=C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
 = G:=G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214
 = J:=J:\Install_ECC6_64_uni\BS_2005_SR3_SAP_Installation_Master\IM_WINDOWS_X86_64
ALLUSERSPROFILE = C:\Documents and Settings\All Users
APPDATA = C:\Documents and Settings\d12adm\Application Data
CLIENTNAME = TAL-MOBILE
ClusterLog = C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles = C:\Program Files\Common Files
CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
COMPUTERNAME = SAPRH-PROD1
ComSpec = C:\WINDOWS\system32\cmd.exe
DBMS_TYPE = ora
dbs_ora_schema = SAPSR3
dbs_ora_tnsname = D12
FP_NO_HOST_CHECK = NO
HOMEDRIVE = C:
HOMEPATH = \Documents and Settings\d12adm
JAVA_HOME = C:\Program Files (x86)\Java\j2re1.4.2_09
LOGONSERVER =
CDBOUREGREG
NLS_LANG = AMERICAN_AMERICA.UTF8
NUMBER_OF_PROCESSORS = 8
ORACLE_HOME = D:\oracle\D12\102
ORACLE_SID = D12
OS = Windows_NT
Path = D:\oracle\D12\102\bin;C:\Program Files (x86)\Java\j2re1.4.2_09\bin;C:\Program Files (x86)\EMC\PowerPath\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\usr\sap\D12\SYS\exe\uc\NTAMD64
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB = D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64-multi-thread;D:\oracle\D12\102\perl\5.8.3\lib;D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64;D:\oracle\D12\102\perl\site\5.8.3;D:\oracle\D12\102\perl\site\5.8.3\lib;D:\oracle\D12\102\sysman\admin\scripts;
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_IDENTIFIER = EM64T Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 0f0b
ProgramFiles = C:\Program Files
ProgramFiles(x86) = C:\Program Files (x86)
SAPDATA_HOME = I:\oracle\D12
SAPEXE = G:\usr\sap\D12\SYS\exe\uc\NTAMD64
SAPINST_EXEDIR_CD = J:/Install_ECC6_64_uni/BS_2005_SR3_SAP_Installation_Master/IM_WINDOWS_X86_64
SAPLOCALHOST = saprh-prod1
SAPSYSTEMNAME = D12
SESSIONNAME = RDP-Tcp#1
SystemDrive = C:
SystemRoot = C:\WINDOWS
TEMP = G:\usr\sap\D12\tmp\1
TMP = G:\usr\sap\D12\tmp\1
TNS_ADMIN = G:\usr\sap\D12\SYS\profile\oracle
USERDNSDOMAIN = ONEPNET.INTRA
USERDOMAIN = ONEPNET
USERNAME = d12adm
USERPROFILE = C:\Documents and Settings\d12adm
windir = C:\WINDOWS
User: ONEPNET\d12adm, Id: S-1-5-21-770850386-355409785-620655208-35637
Working directory: C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:185]
 syslib::logSystemState()
System information
==================
OS version, host name: Microsoft Windows [Version 5.2.3790 Service Pack 2] SAPRH-PROD1
RAM size (MB): 12287
Swap size (MB): 21708.6
TRACE 2008-10-06 12:14:20.709
Running with control file control.xml version=701 changelist=33819 product-id=d0e28628
TRACE 2008-10-06 12:14:20.709
Selected Service NW_ABAP_OneHost|ind|ind|ind|ind
TRACE 2008-10-06 12:14:20.709 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml
INFO 2008-10-06 12:14:20.709 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml'.
INFO 2008-10-06 12:14:20.959 [sixxcstepexecute.cpp:387]
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
TRACE 2008-10-06 12:14:29.428
Java script statistics: ScriptSize 4788012 CompileTimeInSeconds 8.437
TRACE 2008-10-06 12:14:29.459 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iajsmod.dll
TRACE 2008-10-06 12:14:29.537 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodos.dll
TRACE 2008-10-06 12:14:29.569 [synxccuren.cpp:1115]
 CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:29.584
Call block:W2K_ServicePack_Check_ind_ind_ind_ind
 function:W2K_ServicePack_Check_ind_ind_ind_ind_Preprocess
is validator: false
TRACE 2008-10-06 12:14:29.834
Status of Step |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password is not OK. Re execute only that step and go on in RESTART mode.
TRACE 2008-10-06 12:14:29.991 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml
INFO 2008-10-06 12:14:29.991 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml'.
TRACE 2008-10-06 12:14:30.131 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml
INFO 2008-10-06 12:14:30.147 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml'.
INFO 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:781]
Execute step checkDDIC000Password of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0
TRACE 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:850]
Execution of preprocess block of |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password returns TRUE.
TRACE 2008-10-06 12:14:30.272 [synxccuren.cpp:1115]
 CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:30.272
Call block:NW_DDIC_Password_ind_ind_ind_ind
 function:NW_DDIC_Password_ind_ind_ind_ind_SubComponentContainer_checkDDIC000Password
is validator: false
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstance.byNumber(00, saprh-prod1)
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstanceInstall.find(
function (instance) {
 return instance.getNumber() == number && instance.getHostName().equals(host);
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall.find() done: 1 instances found
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall.getSystem(D12)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NW()
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NW() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall.getSystem() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers(D12)
TRACE 2008-10-06 12:14:30.319
t_NW_users.updateRow(, WHERE sid='D12'), updating
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.319 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWDialogInstance.getRFCUser() done
TRACE 2008-10-06 12:14:30.381 [syxxccuren.cpp:31]
 CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPPARAM700', const iastring & '1')
Environment variable SAPPARAM700 set to value '1'.
TRACE 2008-10-06 12:14:30.397 [iaxxctrace.cpp:42]
 CIaIcmAuth::traceInit()
Initialized SAP trace: tf is now set.
INFO 2008-10-06 12:14:30.412 [synxccuren.cpp:65]
 CSyCurrentProcessEnvironmentImpl::removeEnvironmentVariable(iastring)
Removed environment variable SAPPARAM700 from current process environment.
TRACE 2008-10-06 12:14:30.412 [iaxxbsapparam.cpp:68]
 CIaSAPParam::initializeDefaultValues_impl()
Read default profile values from kernel.
TRACE 2008-10-06 12:14:30.412 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodapp.dll
TRACE 2008-10-06 12:14:30.694 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodrfc.dll
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.084 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </body></html>
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:33.957 [iaxxdlghnd.cpp:198]
 CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </body></html>
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:35.644 [iaxxdlghnd.cpp:198]
 CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </body></html>
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:44:40.278 [iaxxcnclhd.cpp:84]
 CCancelHandler::doHandleDoc(IDialogDocument * pDoc )
ACTION_CANCEL requested
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> You are about to cancel the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System installation. <li> Choose one of the following: </li> <ul> <li> 'Continue' - to continue the installation. </li> <li> 'Stop' - to stop the installation and exit SAPinst. You can continue the installation later from this point Note: If you stop the installation after the installation activites have been started, do not use the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System, as it is not ready to be used. </li> </ul> </body></html>
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-10-06 12:44:41.840 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
INFO 2008-10-06 12:44:42.074 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.

Hi,
The possible problem for the DDIC user could be, once the data imported the password of the DDIC got reset to older password as in ECC5, try login the system with sap* user and reset the password of DDIC, then login as DDIC user and set the password permannetly and retry the activity.
If sap* also shows with same problem try changing the password of sap* from DB level by executing the query(you can find solutions for this in SDN forum threads, check them). or try deleting the user sap* and recreate where user gets creted wiuth default pasword as "PASS" and logon and reset the user DDIC.
Regards.

Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA

Hello guys,
I have just performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
Any other suggestions and good advices?
Thanks a lot in advance.
Regards, Polina

Hi Manoj, 
I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy): /usr/sap/SID/instance/work/ 
1) std_server0.out is in the condition before the system copy, no new data was written there. 
2)dev_disp 
DpJ2eeStart: j2ee state = STARTED 
DpJ2eeLogin: j2ee state = CONNECTED 
Fri Feb 26 12:58:04 2010 
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212] 
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Fri Feb 26 12:58:20 2010 
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN 
Fri Feb 26 12:57:20 2010 
***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207] 
ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp 3214] 
WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp 3491]
It seems that java is trying to start but something goes wrong and it have to shut down
3)dev_bootstrap 
[Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66) 
[Thr 1086335296] ********************************************************************** 
ERROR => The Java VM terminated with a non-zero exit code. 
Please see SAP Note 943602 , section 'J2EE Engine exit codes' 
for additional information and trouble shooting. 
********************************************************************** 
[Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17 
[Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)
4) jvm_bootstrap.out 
... 
Exception occurred: 
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
.. 
Exception occurred: 
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties! 
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476) 
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146) 
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties! 
[Bootstrap module]> Problem occurred while performing synchronization.
j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...
Thanks in advance. 
Regards, 
Polina

How to reprocess failed monitor jobs in Import ABAP phase of system copy

Hi Experts,
Can you please let me know how to reprocess the failed monitor jobs during Import ABAP phase as i am performing the import of data as part of system copy of ABAP stack.
But i have not got any errors so far as the import process is running fine but there are few jobs which are showing as failed.Hence how can i reprocess these failed jobs again.
Regards,
Dheeraj

Hi Juan,
Here you go.And i have not selected the option" Start migration monitor manually "and where as on Source system the guy has used migration monitor option in order to split the tables and ftp for transferring the export data on target system.
Is this error anything to do with that?
Import Monitor.java.log
Import Monitor jobs: running 1, waiting 1, completed 223, failed 13, total 238.
Loading of 'RSERRORHEAD' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 224, failed 13, total 238.
Import.monitor.log
WARNING: 2011-04-30 02:57:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2011-04-30 02:57:31
13 error(s) during processing of packages.
INFO: 2011-04-30 02:57:31
Import Monitor is stopped.
SAPINST_dev.log
TRACE 2011-04-30 02:57:37.578 [iaxxgenimp.cpp:699]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 1 Support Release 1 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to <code>C:\Program Files/sapinst_instdir/NW701/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/</code>. </body></html>
TRACE 2011-04-30 02:57:37.578 [iaxxgenimp.cpp:1248]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Regards,
Dheeraj

Export for system copy fails - Error 9 (Bad file number)

Hello all,
I am attempting to perform the export phase for a hetergenous system copy on our BI system (BI 7.0 - NW2004s). This system runs on HP-UX 11.11 using Oracle 10.2.0.2 and will be migrated to Windows Server 2003 and MS SQL Server 2005, once the export is complete.
While running sapinst to export the data from the source system, there are several input dialog screens that are skipped, which means I am not able to enter all the paramters used for the export. After seeing this behavior from sapinst, I reviewed the sapinst.log and sapinst_dev.log files and find the warning/error "System call failed. Error 9 (Bad file number)". I have included a portion of these files below.
I have reviewed notes 546006 and 583861, but these seem to refer to an Oracle error ORA-27121, but I am not receiving any Oracle errors in sapinst.log or the Oracle alert log. I have looked for possible permission or ownership problems with any of the SAP or Oracle files, but have not found any that were incorrect. Also, these errors do not specify which file sapinst is having problems with, so I do not have a specific file or area to check.
If anyone has seen something similar to this and has any suggestions, I would greatly appreciate any help.
sapinst.log details:
INFO 2009-02-14 15:15:51.67
Execute step collect of component |NW_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind
|ind|ind|0|0
INFO 2009-02-14 15:15:52.737
Account bwpadm already exists.
WARNING 2009-02-14 15:15:52.747
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:15:52.757
Account 0 already exists.
WARNING 2009-02-14 15:15:52.777
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:15:52.777
Account 200 already exists.
WARNING 2009-02-14 15:15:52.827
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:16:04.937
Creating file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/ypcat.log.
INFO 2009-02-14 15:16:05.007
Output of ypcat passwd.byname is written to the logfile ypcat.log.
sapinst_dev.log details:
TRACE      2009-02-14 15:15:52.737
2009-02-14 15:15:52.743 NW._getSAPMount() done: /sapmnt
INFO       2009-02-14 15:15:52.737 [syuxcaccmg.cpp:227]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
Account bwpadm already exists.
TRACE      2009-02-14 15:15:52.747 [syuxcuser.cpp:1943]
           CSyUserImpl_getOsInfos(ILogBook *m_logBook, iastring sName, iastring sID, tSyUserInfo& msUserinfo)
getspnam(bwpadm) returned NULL.
WARNING    2009-02-14 15:15:52.747 [syxxsyshlp.cpp:78]
           syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
Regards,
Rusty Robbins

Hello Peter,
Thanks for the reply. I did confirm the points you made, and have the details below.
1. check filesystem, if you have enough space, especially /tmp
All filesystems have available space, and /tmp has 310 MB available, before the start of sapinst.
2. check again alert log, trace log for Oracle,
I could not find any errors in the alert_SID.log or any unusual trace files.
3. How did you run sapinst? Are you using "root" account.
I am running sapinst as user root and I am following all the recomendations in the system copy guide (at least as far as I can tell. ;p )
We have four BI systems in this landscape, and the other three have migrated successfully. The procedure I am using, is the same as for the other 3 systems and uses the same SAP media directory that was used on the other systems.
One other item that may be part of my problem here, is that this system is the production system, and was originally installed as a high-availability system, using HP-UX Service Guard for clustering. Currently, this system does not have fail-over enabled, but of course the cluster is still intact. One required piece of the Service Guard enviornment is the use of a virtual hostname. This seems to resolve successfully by sapinst, as I see the correct (virtual) hostname referenced several times. While this is a clustered system (for fail-over purposes), the CI and DB are installed on the same host. So it is not a distributed system, and if failover had been initiated, it would fail both the CI and DB instance, which is the same and only SAP instance.
This did raise one question in my mind, however. I am attempting to extract this using the following menu path within sapinst.
SAP NetWeaver 7.0 Support Release 3 --> Software Life-Cycle Options --> System Copy --> Oracle --> Source System Export --> Central System --> Based on AS ABAP and AS Java
Since this does use Service Guard, but is not a distributed system, should I be using a different path in the sapinst tree, for the export? I have only performed a migration using the above path, so I am not familar with the detailf of the other types, such as High-Availabitly or Distributed-System.
Regards,
Rusty

Homogeneous System Copy - Help me

Hi,
I need to refresh the Training environment with the QAS environment data then I did the client copy from QRP(QAS environment) to TRN (training environment). This copy was made successfully, but with some data inconsistences.
And then a decided to do a Homogeneous System Copy.
I did the HSC selecting the option "Standard System Copy/Migration (R3Load-Based) " but exist the another option "System Copy / Oracle Backup/Restore".
And my doubt is: the process that I need to do is the Standard System Copy / Migration (R3Load-Based) or System Copy / Oracle Backup/Restore?
And the inverse process (import), can I to install just a Database Instance, once that a Central Instance already exists?!
Thanks and Regards,
Dany Anderson

Hii the process you need to do is system copy . In system copy there are two ways one by using R3load tool and other is backup method. Generally the backup method is faster where all your database will be backedup and copied to the target system. R3load and oracle backup are just two methods of doing system copy.
homogeneous system copy if your target system is on the same operating system and database system as your source system. The database contents are copied from the source system to the target system.
You perform a heterogeneous system copy if you want to change the operating system or database system. Migration is another term for a heterogeneous system copy.
Please reward points if useful

Homogeneous system copy using database specific tools

My enviroment is ECC6/Oracle 10.2.0.2/Solaris 10
I'm attempting my first system copy (central instance ABAP) using database specific tools from my PRD to my QAS system
in the source system I ran sapinst and proceed as follows
Execution of Service SAP ERP 6.0 SR3 > Software Life-cycle options > system copy > oracle > source system export >
central system > based on AS ABAP ? Database Instance Export
The export creates two folders and an file ie ABAP, JAVA & LABELIDX.
The folder ABAP is empty while JAVA has three files.see details below. I have a feeling something is not right ?
Kindly advice before I proceed with database offline backup and importation in the target system
*/oracle/INSTDIR/MIGRATION-CD/SYSCOPY*
*root@PRD#*
*root@PRD#*
*root@PRD#ls -l*
*total 6*
*drwxrwxr-x   2 root     sapinst      512 Jul 12 13:19 ABAP*
*drwxrwxr-x   2 root     sapinst      512 Jul 12 13:19 JAVA*
*-rw-rw-r--   1 root     sapinst       10 Jul 12 13:19 LABELIDX.ASC*
*root@PRD#*
*root@PRD#cd ABAP*
*root@PRD#ls -l*
*total 0*
*root@PRD#*
*root@PRD#cd ../JAVA*
*root@PRD#pwd*
*/oracle/INSTDIR/MIGRATION-CD/SYSCOPY/JAVA*
*root@PRD#ls -l*
*total 6*
*-rw-rw-r--   1 root     sapinst       19 Jul 12 13:19 LABEL.ASC*
-rw-r-----   1 root     sapinst       14 Jul 12 13:19 LABELIDX.ASC
-rw-r-----   1 root     sapinst      168 Jul 12 13:19 SOURCE.PROPERTIES
root@PRD#
root@PRD#
According to the system copy documents I've gone through I expect to see the following
in the export directory
=> structure with label files and source system information
=> database structure files (*.STR) for ABAP database objects
=> database statistics
=> Size calculation for the target database (*.EXT, DBSIZE.XML)
=> Archiving of the SDM
=> Archiving of application specific file system content
I get a dialog box message that the export has completed successfullu but only two phases were done ie
=> NW_export
=> Prepare To export Java

Thanks Mark
I'll proceed with the import & inform you about the outcome
My QAS system is the transport domain controller i.e. it hosts the transport directory /usr/sap/trans
What happens to pending transports after system copy ? Is there a way I can retain them or do I have to advice my users to complete pending requests so that I can import all of them before proceeding .
what happens to the CUA configurations in my 3 tier system landscape after I overwrite QAS ? I will make a note of all the RFC's & thier configuration details just incase I need to recreate them
Regards

System copy for R/3 4.7 MSCS

Hi all,
Currently we are planning a system copy using R3Load import/export on R/3 4.7. Below is the details:
Target : New PRD with clustering MSCS & OFS configured (both win & oracle 64 bit)
Source: Old PRD with clustering MSCS & OFS configured (both win & oracle 32 bit)
Questions:
1. the target is already been configured with all the clustering setup and installed with SAP with old data. Now, we just want to copy the latest old PRD data to the target. we plan to skip all the step and just re-run the DB import step using the SAPinst R3load import/export method. Does the sapinst 6.40 will auto drop the DB & re-create DB during import?
2. If the sapinst 6.40 can't drop & re-create, how we can drop the DB & re-import the new DB?
Thanks

If your target system is up and running then you can use database specific tools to copy your database.
Ie: online / offline backup to restore from your old to new system.
You can go thorugh the docs under : SAP on Oracle

System copy based on export/import on MSCS

Hi,
a NW 7.0 istance (BW usage) on MSCS... we would like to copy to new host (as dev refresh). This MSCS is made of:
- host1 (first node)
- host2 (second node)
- mscdhost (mscs virtual host)
- orahost (oracle virtualhost... on a dedicated group)
- saphost (sap virtual host on a dedicate group)
Central istance is installed on host1 and a dialog istance is installed on host2.
So for the export I run sapinst (Software Life-Cycle OptionsSystem Copy / Oracle / Source System / Distributed System / High-Availability System / Based on ABAP and Java):
Preparation as: sapinst.exe SAPINST_USE_HOSTNAME=orahost
Table splitting as: sapinst.exe SAPINST_USE_HOSTNAME=orahost
Db Export as: sapinst.exe SAPINST_USE_HOSTNAME=orahost
Central Istance as: sapinst.exe SAPINST_USE_HOSTNAME=host1
Is it OK?
Regards.

Hi,
Please refer this thread [BW system copy in MSCS|BW system copy in MSCS;.
Regards,
Bhavik G. Shroff

Copy oracle server data to remote system over internet

Hi,
I am using Redhat 4 linux system as Oracle 10g server. My database is in archivelog mode. I am not good at data guard so i am not using it.
But i want to copy my archive log file to another linux system over internet. so that in case of server crash i can recover my database using backup and archive log files.
It will be best if i can do it at each archive log creation like data guard and ok if it do at a time interval
Please suggest me any tool which can copy data over internet on linux system and it should be free or easy to use.
Thanks
umesh

Hi,
I am using Redhat 4 linux system as Oracle 10g server. My database is in archivelog mode. I am not good at data guard so i am not using it.
But i want to copy my archive log file to another linux system over internet. so that in case of server crash i can recover my database using backup and archive log files.
It will be best if i can do it at each archive log creation like data guard and ok if it do at a time interval
Please suggest me any tool which can copy data over internet on linux system and it should be free or easy to use.
Thanks
umeshOne tool I can suggest is OS copy command.
I used to use this tool for one of our server which was on SCO Unix with Oracle 7. But there are implications with this:
1. The archives got corrupted frequently during copy, then we need to identify the archives by matching it's size on production and on standby and copy it once again.
2. Manually recover the database after every 15 minutes.
I would suggest to go for oracle managed setup i.e. Standby configuration. It's not tough.
Regards,
S.K.

System copy Oracle 10.2 in MSCS

Similar Messages

Maybe you are looking for