System copy pdf

hi,
i am trying to download system copy doc from service market place and sdn for netweaver 2004 ecc5 abap stack from windows IA64 bit to x86 machine.
I affraid it is not available
1. Can any body help me to find the url of system copy?
2. one more thing I am tring to make system copy between
sourch system = Windows IA64 Bit
Target System = Windows x86 machine
which system copy i have to download homogenious or Hetrogenious ?
ECC version and Database is same .
Thanks in Advance !

lallan tripathi          your DB are ?
As of basis release 6.20 productive use of 32-bit platforms is not recommended.
In your scenario, you need to perform HETROGENEOUS system copy as source hardware is 64bit and target hardware is 32bit.
In Homogenious system copy, hardware, SAP version, Database all should be same...
You're wrong, it's are standart homogeneous system copy on most DB's....
As the both are :
4103   Little Endian   Alpha, Intel X86 (and clones),
                      X86_64, Itanium (Windows+Linux),
                      Solaris_X86_64
The bit are not affect you can do 32 to 64 and vice versa. Regards.

Similar Messages

Authority issues after homogeneous system copy - as/400 v5r1 - R/3 4.6C

Hello,
I am trying to complete a homogeneous system copy of an R/3 system.
The source system is PRD - the target system is TST. The hardware platforms are different (both iSeries) but the kernel/pdf/OS patch levels are all identical.
The process I have follow so far is this:
1. Preprocessing of the R3PRDDATA library.
2. SAVLIB of R3PRDDATA.
3. Delete old R3TSTDATA lib on target system using QSECOFR
4. Create new R3TSTDATA using SQLUTIL as TSTOFR (TSTOFR is my user for the target system)
5. CHGOBJOWN OBJ(R3TSTDATA) OBJTYPE(*LIB) NEWOWN(TSTOFR)
6. GRTOBJAUT OBJ(R3TSTDATA) OBJTYPE(LIB) USER(SAP02) AUT(CHANGE)
7. Detach existing Journal, create new journal receiver, create new journal ...
DLTJRN JRN(R3TSTDATA/QSQJRN)
DLTJRNRCV JRNRCV(R3TSTJRN/QSQJRN0001)
CRTJRNRCV JRNRCV(R3TSTJRN/QSQJRN0001) THRESHOLD(500000)
CHGOBJOWN OBJ(R3TSTJRN/QSQJRN0001) OBJTYPE(*JRNRCV) NEWOWN(R3OWNER)
CRTJRN JRN(R3TSTDATA/QSQJRN) JRNRCV(R3TSTJRN/QSQJRN0001) MNGRCV(SYSTEM) DLTRCV(NO)
CHGOBJOWN OBJ(R3TSTDATA/QSQJRN) OBJTYPE(*JRN) NEWOWN(R3OWNER)
8. RSTLIB from tape.
9. AS4FIXFILE on R3TSTDATA with
   DBLIB         R3TSTDATA
   CHGOWN   *NO
   ENDJRN      *YES
   STRJRN      *YES
   CHGFILE     *NO
10. install license key
So from this point the system will start without a problem. However whenever I try and write something to the database I get this type of error (via SM21 or ABAP dump) message:
Database error -551 at SEL access to table BTCOPTIONS
            Not authorized to object BTCOPTIONS in R3TSTDATA type *file
            Job=378721/TST02/WP02
Database error text........: "Not authorized to object SCPRACTR in R3TSTDATA
type *FILE. Job=379089/TST02/WP00"
I have also run GRTOBJAUT for the - TST02 user on the R3TSTDATA lib but still the same problem.
I'm certain the issue is related to the user on the 400 that is actually used by the work processes, and that user does not have the relevant rights to R3TSTDATA.
Any suggestions on how to resolve this problem will be humbly received.
Many thanks, Colin

Hi,
step 9 is wrong ;-(((
old:
9. AS4FIXFILE on R3TSTDATA with
DBLIB R3TSTDATA
CHGOWN *NO
ENDJRN *YES
STRJRN *YES
CHGFILE *NO
correct:
9. AS4FIXFILE on R3TSTDATA with
DBLIB R3TSTDATA
CHGOWN *YES    <<<<<
ENDJRN *YES
STRJRN *YES
CHGFILE *NO
it NEEDS to run with QSECOFR !!!
=> it will work !
GRTOBJAUT on all objects is rubbish only !!! no real solution!!!
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Error during Homogenous System copy of ABAP+JAVA stack

Hi All,
I'm trying to do a homogeneous system copy of an XI system NW04s on Windows 2k3 and Oracle database to another windows 2k3 machine. SCS and Database went on fine but during CI installation on the target system I'm stuck at "Run ABAP Reports" phase.
I'm getting an error:
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
runRADDBDIF was executed with status ERROR
The ABAP stack is however up and when I login to 000 client using DDIC user and try to execute the report RADDBDIF, I get a runtime error RAISE_EXCEPTION with Exception condition "WRITE_FAILED" raised.
A RAISE statement in the program "SAPLSUGI" raised the exception condition "WRITE_FAILED".
If anyone has encountered similar problem, kindly help me.
Regards,
Sameer

Hi Juan,
I've already checked dev_disp and dev_ms but didn't find any errors. However, I got some errors in dev_w0. I'm pasting the same for your reference.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon Jan 07 18:45:15 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno      04
M sid        COP
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    111
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        2148
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2148) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Jan 07 18:45:16 2008
M DpShMCreate: sizeof(wp_adm)          10056     (1436)
M DpShMCreate: sizeof(tm_adm)          4232256     (21056)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1536)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05EC0040, size: 4883696)
M DpShMCreate: allocated sys_adm at 05EC0040
M DpShMCreate: allocated wp_adm at 05EC2090
M DpShMCreate: allocated tm_adm_list at 05EC47D8
M DpShMCreate: allocated tm_adm at 05EC4808
M DpShMCreate: allocated wp_ca_adm at 062CDC48
M DpShMCreate: allocated appc_ca_adm at 062D3A08
M DpShMCreate: allocated comm_adm at 062D5948
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06356808
M DpShMCreate: allocated gw_adm at 06356848
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06356878
M DpShMCreate: allocated wall_adm at 06356880
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host hydhtc24738
M calling db_connect ...
C Prepending F:\usr\sap\COP\DVEBMGS04\exe to Path.
C
C Mon Jan 07 18:45:18 2008
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0649D5C8   064A2B64   064A23EC
C Attaching to DB Server COP (con_hdl=0,svchp=064A2338,srvhp=064B3F34)
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now '/@COP' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=064A2338,usrhp=064FFA98)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0649D5C8   064A2B64   064A23EC
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now 'SAPSR3/<pwd>@COP' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance COP is running on HYDHTC24738 with ORACLE version 10.2.0.1.0 since JAN 07, 2008, 15:34:24
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20080107 184516 HYDHTC24738
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Jan 07 18:45:22 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0AB50040, size: 4400000)
M SHM_ROLL_AREA          (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA          (addr: 0AF90040, size: 32768000)
M SHM_ROLL_ADM               (addr: 0CEE0040, size: 615040)
M SHM_PAGING_ADM          (addr: 0CF80040, size: 525344)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0D010040
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12160 bytes (50 server) at 0D0A0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 7, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10CD00C8, size: 30000000, end: 1296C448)
B dbtbxbuf: Buffer TABLP (addr: 129700C8, size: 10240000, end: 133340C8)
B dbexpbuf: Buffer EIBUF (addr: 133400D0, size: 4194304, end: 137400D0)
B dbexpbuf: Buffer ESM   (addr: 137500D0, size: 4194304, end: 13B500D0)
B dbexpbuf: Buffer CUA   (addr: 13B600D0, size: 3072000, end: 13E4E0D0)
B dbexpbuf: Buffer OTR   (addr: 13E500D0, size: 4194304, end: 142500D0)
M
M Mon Jan 07 18:45:23 2008
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Mon Jan 07 18:45:26 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1965E820
S
S Mon Jan 07 18:45:27 2008
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D8C00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D8C02B0
S    using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2236 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 4888kb, dir_size: 4856kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
A >> Shm MMADM area (addr=57E91D98 leng=126176 end=57EB0A78)
A >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
A RFC Destination> destination hydhtc24738_COP_04 host hydhtc24738 system COP systnr 4 (hydhtc24738_COP_04)
A RFC Options> H=hydhtc24738,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 7406 bytes at 0FFB0040
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\COP\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\COP\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Mon Jan 07 18:45:28 2008
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B    dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B     max_blocking_factor =   5, max_in_blocking_factor      =   5,
B     min_blocking_factor =   5, min_in_blocking_factor      =   5,
B     prefer_union_all    =   0, prefer_join                 =   0,
B     prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B     convert AVG         =   0, alias table FUPD            =   0,
B     escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B     select *            =0x0f, character encoding          = STD / <none>:-,
B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                           rule_fae->0, concat_fae->0, concat_fae_or->0
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.111.20050900]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [14]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume hydhtc24738_COP_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >hydhtc24738_COP_04                      <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime    = -999
E EnqId.RandomNumber      = -999
E ReqOrd.TimeInSecs       = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime    = -999
E EnqId.RandomNumber      = -999
E ReqOrd.TimeInSecs       = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId:          EnqTabCreaTime/RandomNumber    = 07.01.2008 18:45:27 1199711727 / 1692
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec    = 07.01.2008 18:45:28 1199711728 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec    = 07.01.2008 18:45:28 1199711728 / 1
E Status:         STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <hydhtc24738_COP_04 >
L BtcSysStartRaise: End
S
S Mon Jan 07 18:45:36 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05E90040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05E907A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05E907E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05E907EC
S
S Mon Jan 07 18:45:44 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
B
B Mon Jan 07 18:47:27 2008
B dbmyclu : info : my major identification is 3244494858, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is DCBD22E36FC346F1BF890002E339BE1E.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
A
A Mon Jan 07 18:47:55 2008
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Mon Jan 07 18:48:02 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Mon Jan 07 18:48:03 2008
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Mon Jan 07 18:48:04 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Jan 07 18:48:04 2008
A
A ABAP Program SAPLSUGI                                .
A Source LSUGIU08                                 Line 77.
A Error Code RAISE_EXCEPTION.
A Module $Id: //bas/700_REL/src/krn/runt/abfunc.c#10 $ SAP.
A Function ab_jfune Line 2561.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Exception condition "WRITE_FAILED" raised..
A
S
S Mon Jan 07 18:53:35 2008
S found spool memory service RSPO-ACTIONS at 1D8C9978
B
B Mon Jan 07 20:31:35 2008
B table logging switched off for all clients
Regards,
Sameer

SAP BI System Copy with only Config changes, Not Data

Hi BASIS,
I have a requirement from a client to build a system landscape stratagy for their SAP BI system.
We have DEV - QA - PRD systems for SAP BI (7.0 SP 16)
Both DEV and QA are completely out of sync with PRD. We are doing development tasks directly on PRD. Now we have decided to re-sync the DEV & QA systems with PRD.
'System copy with Data' will be easier to implement. But our PRD DB size is nearly 3TB. The client is not ready to pay for the extra/temp. disk space for DEV and QA sync. ( We are on DB2).
Now, we have only one option left. Capture all Config changes from PRD and transport them back to DEV & QA. This is a tedious task and cause many inconsistencies.
Would anyone have any other ideas to bring the systems in sync with less time involved and less resources.
I am a SAP BI person. So dont know much about BASIS tasks. Please help me with any links of best practises or SAP notes.
Cheers

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

BDLS Conversion after System Copy fails

Hi All,
We are doing a Homogeneous System Copy on a AIX 5.3/Oracle 10.2.0.4/ SAP ERP 6.0 environment.
After the system copy we had to run BDLS to convert logical system names in tables. Except for 3 tables namely EDPP1, TBD05 and TBD06 the BDLS run was successful.
We tried to convert the logical system names in these tables by running BDLS for these tables individually however they failed again.
The error was - "Error in field of table. Manual correction required"
I checked SAP Note 121163 and it is mentioned in this note -
"If the new logical system name already exists in the system, it can cause errors for tables in which the logical system is key field or
unique index (for example, COFIO1). In this case the number of converted entries is smaller than the number of selected entries."
And in this case a manual post-processing is required. How do I go about doing this manual post-processing?
1. Should I maintain these directly at the table level - which is cumbersome as there are a lot of entries?
2. Or using a small ABAP program?
Please let me know if any other information is required frommy side.
Thanks, Dibya

Hi,
Yes ofcourse, you need to check all settinfs, once you copy teh system you are going loose all RFC's and Source and Destinations ectc, so adject all that settings.
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Thanks
Reddy

Homogeneous system copy on windows abap + java with a backup online

Hello gurus, I need to perform a refresh (HSC) from our production to our test system. we have a daily backup online that I want to use for restoring the test system .
from the procedure it's not clear how to proceed .
as my point of view i should say :
1) perform a restore redirect using backup online
2) export on the production the java side using database specific tools
3) import the java side on the restored database (when it stops to ask me to restore database i will use the backup created by the export procedure)
4) apply all the logs to the end of export of java to put the database in a consistente state
5) finish the procedure of import
my question marks are related to the step 2) and 3) . the restored database will keep the data of java side from the second backup (export) run by sapinst?
and.. do I have to apply logs till the export is finished to put db in a consistente state?
someone of you have performed it once ?
any advice is greatly apprechated

Hello guys,so just to be clear again
on the target system I have to execute
db2 drop database <SID> and following delete the content of sapdata?
I have seen on this website the possibility to execute the redirect restore using the comman "replace existing" . Can I apply this without deleting anything ?
ftp://ftp.software.ibm.com/ps/products/db2/info/vr9/pdf/letter/en_US/db2hae90.pdf
REPLACE EXISTING If a database with the same alias as the target database alias already exists, this parameter specifies that the restore utility is to replace the existing database with the restored database. This is useful for scripts that invoke the restore utility, because the command line processor will not prompt the user to verify deletion of an existing database.
For the java side , once the the restore redirect has been performed successful do I have to use the option for recreating the WAS AS JAVA only as system copy only? This will populate my java side correctly with the data of my exporting system?
best regards

R3load system copy: Error on database export

Hello all,
I am trying to do a system copy via r3load - Export and then import on a WAS 640 oracle Netweaver based system which has both ABAP and JAVA stack. The source and target system are on the same win2000 host. I am getting below errors in the export stage of the system copy. I am following the sap doc: Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS ABAP 6.40 SR1 .pdf
As per the doc the below are the main steps
1) Generate DLL-statements [Page 55] (Call transaction SE38 and run the program SMIGR_CREATE_DDL...Execute the program. The DDL statements are generated and are written to thespecified directory.)
2) Run SAPinst to export the database [Page 48].
3) Set up the target system [Page 60].
I am stuck at 2) with the below errors during the export.
For step 2, the sapinst asked me to enter
source <SID>
Source <DBSID>
Source schema: I gave this as SAP<SID>
no of process and alphabetic load.
Afer this...
R3ldctlExport.log reports the below errors
WARNING: no technical settings for table "WFQUE" in SAP data dictionary - defaults used
WARNING: no technical settings for table "WFSTO" in SAP data dictionary - defaults used
WARNING: value for DD28S.CONSTANTS not in quotes, view "COVMVSVW"
WARNING: value for DD28S.CONSTANTS not in quotes, view "DVTOPAY"
WARNING: value for DD28S.CONSTANTS not in quotes, view "V_LTDX"
WARNING: value for DD28S.CONSTANTS not in quotes, view "W3TEMPLATE"
DbSl Trace: ORA-24508 occured when executing SQL statement (parse error offset = 29)
ERROR: ExeRead for get_loc_table_inf failed
ORA-24508: Message 24508 not found; product=RDBMS; facility=ORA
Error generating DDLINF.TPL
(UPT) Info: Preparing tables and tablespace entries.
(UPT) Info: Distributing tables and tablespace entries.
(WLL) Info: finished writing location lists
And sapinst reports several of the below errors...
ERROR 2007-06-17 17:24:14
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPUSER.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPDODS.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPPOOL.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPSDIC.log
...etc
*.TSK files are being created.
For example, if I describe for one particular package...
SAPSSEXC.TSK has entries like the below
D DM45T E ok
D DM46S E ok
D DOKCLU E err
D DOKHL E xeq
D DOKIL E xeq
D DSYST E xeq
D DYNPSOURCE E xeq
D ENLFDIR E xeq
D EUDB E xeq
D EUGUITEXT E xeq
D EUOBJ E xeq
D EUOBJEDIT E xeq
A log file SAPSSEXC.log exists which notes the termination of the r3load export process.
EXP) TABLE: "DM42S"
(EXP) TABLE: "DM42T"
(EXP) TABLE: "DM43T"
(EXP) TABLE: "DM45L"
(EXP) TABLE: "DM45T"
(EXP) TABLE: "DM46S"
(NT) Error: DOKCLU                        : normal NameTab from 20041108162211 younger than alternate NameTab from 20010201171049!
Syslog: k CQF : DOKCLU                        &20010201171049&2004110rscpgdio 47myCluster (55.13.Exp): 874: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.13.Exp): 875: suspicious create timestamp of alternate nametab encountered.
myCluster (55.13.Exp): 879: create timestamps of nametab: 20041108162211; alternate nametab: 20010201171049.
myCluster (55.13.Exp): 297: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: code page conversion failed
             rc = 2
.--============.|                              RSCP - Error                            || Error from:             Codepage handling (RSCP)                   3 || code:   64 RSCPECALL    Illegal mixture of procedure calls.         || Altername NameTab too old                                            || module: rscpgdio no:   47 line: 2876                    T100: TS007 || TSL01: CQF p3: DOKCLU                        &20010201171049&2004110||                                                                      |`--
'(rscpMC) Warn: env I18N_NAMETAB_TIMESTAMPS not set
(DB) INFO: disconnected from DB
I:\usr\sap\VIK\SYS\exe\run/R3load.exe: job finished with 1 error(s)
I:\usr\sap\VIK\SYS\exe\run/R3load.exe: END OF LOG: 20070617185123
Also some of the other log files for other packages terminate with:" disconnected from db" in the middle of the export.
What I tried: I tried putting in the latest patch level for r3ldctl, r3load and r3szchk kernel files. It was at kernel patch 43. I upgraded to latest 175 from market place. And restarted sapinst again to start the export again. Again I face the same problem. Sapinst aborts at this stage again. I basically took the whole sapexedb patch 175 and yupdated the kernel but it did not help.
If any of you out there can lead me in the right direction so that I can get over this stumbling block, would be grateful.
Many Thanks, Vikram
[email protected]

Could anybody please tell what is the required codepage for oracle?
Our system has NLS_LANG=AMERICAN_AMERICA.WE8DEC
Thanks a lot!

BI System Copy of disconnected systems

I am SAP BI person and need some suggestion regarding the BASIS expertise.
If I have two BI systems (Say BI-1 & BI-2). I do not have any transport path maintained nor any connection between these two servers.
If I develop some objects in BI-1 system, can I copy to BI-2 system using some mechanism or custom software. I can also go with the system copy.
Here I have two questions:
1. If both the systems are running on different OS platform
2. If both the systems are running on same OS Platform
What would be the possibility in above mentioned cases? Can I copy the system or objects?
- Danny

Hi,
Here I have two questions:
1. If both the systems are running on different OS platform
Transport it, else copy the CoFiles and DataFiles from B1 to B2 and try
2. If both the systems are running on same OS Platform
What would be the possibility in above mentioned cases? Can I copy the system or objects?
If your Basis team is strong you can do it.So you need basis help.
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Thanks
Reddy

After system copy

Hello
I have connected my Productive BW 7 system with a 3rd party DB.
After the basis perform a system copy from Productive BW to Quality BW are there
any after copy activities to refresh also the connections and the datasources for this connection to point to the
3rd party quality DB?
I mean for ABAP system we can perform through transaction bdls etc. some after copy activities.
Are there similar activities between BW and DB connect systems.
Thank in advance..

Hi,
Yes ofcourse, you need to check all settinfs, once you copy teh system you are going loose all RFC's and Source and Destinations ectc, so adject all that settings.
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Thanks
Reddy

After system copy DTP pointing to Prod Sourcesystem in Quality

Hi,
We have copied BWP system to BWQ.
All the transformations are correctly pointing to R3Q system.
But DTPs are still pointing to R3P system.
How to convert this source system assignment for all the DTPs and InfoPackages?
Regards
SSS

Hi,
Collect the DTPs and then Transport the DTPs again.
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Thanks
Reddy

Homogenous System Copy SAP 4.7, Oracle 9.2.0.7

hi
I have SAP 4.7, Oracle 9.2.0.7 system on windows.
I need to perform a system copy of this to QAS System.
I need some dcouments/procedure to do the same.
Since it is a very old version, so i am not able to find any document.
Please assist.

Hi,
1. http://www-03.ibm.com/systems/storage/disk/pdf/DS6K_SYS_CLONING_white_paper_093005.pdf
2. http://service.sap.com/osdbmigration
3. http://service.sap.com/notes -->547314 - FAQ: System Copy procedure
Regards,
Srini Nookala

BW Powered On HANA - System Copy Process

Dear HANA Gurus,
Now we are on HANA 1.0 SPS03 Rev.21, and we also have a BW 7.3 SP05, running on Windows 2008 64 bit server, on Oracle 11.2.
We want to migrate the BW to HANA DB. Refering to note 1600929 (which is version in revision), the Export method with system copy (using HANA special options) seems fine.
However, not sure how the Import will be done in HANA? We will be creating a new BW on Windows again, and if it is system import it'll again create an Oracle based instance!
When and where it migrates to HANA DB?
Regards
Manish Madhav

Hello,
HANA conversion is heterogeneous system copy process (DB migration). You will export system on Oracle and then you will import into HANA. Of course you need to have proper CDs.
Here comes important question - did you signed up for SAP rampup? BW on HANA is not yet in Global Availability and only some customers are allowed to participate.
You can find required CDs at this location:
http://service.sap.com/swdc
Software Downloads
   Installations and Upgrades
      Browse our Download Catalog
         SAP NetWeaver and complementary products
            SAP NetWeaver BW 7.3 powered by SAP HANA
               BW ON HANA INSTALLATION 1.0
                  Installation
                     Downloads
If you cannot see these CDs - then you are not part of rampup and you need to wait until Global Availability.
If you can see these CDs - then you need to download them and use them to perform import.
I did not yet have opportunity to perform conversion myself (we still need to prepare our system to meed the requirements) but from SAP guides it is apparent that SAP HANA database is installed on one server (appliance) while ABAP is sitting on second server. (In other words - you should not have ABAP on same server as HANA.)
Also note that only ABAP stack can run on HANA.
And installation guide (here is for Windows):
http://service.sap.com/~sapidb/011000358700001240932011E.pdf
In a standard system, all main instances except the SAP HANA database instance run on a single host.
See system copy guide for details:
http://service.sap.com/~sapidb/011000358700001299452010E.pdf
SAP HANA database is available for SAP NetWeaver 7.3 ABAP only.
Tomas

Java WAS System Copy for non-SR1 Systems

Hi,
I found the document describing the Java WAS system
copy for NW 2004SR1.
However, has anybody successfully copied a Java
WAS system (Especially if the SID was
changed) which was not SR1?
I understand how to copy the datafiles, recreate the
control files, adapt the default and instance
profiles, etc..
However, I am not sure which other parameters,
XML files, or database entries need to be changed.
This is for a development system (I wouldn't do this
for a production system).
Any information from somebody who succeeded to do
this would be greatly appreciated.
Thanks,
IF

Hi,
for system copy of SCM 4.0 use the document system copy for webas 6.20
https://websmp205.sap-ag.de/~sapdownload/011000358700002645032002E/syscopy620_140803.pdf
perform DB copy as note 151603 :Copying an SQL Server database (homogeneous system copy)
apply sap note 551915 - R/3 won't start after database restore or database copy after DB copy.
if you want to perform livecache copy also
check Note 457425 - Homogenous liveCache copy using backup/restore
also consider Note 886103 - System Landscape Copy for SAP SCM
regards,
kaushal

System Copy using SAPINST on SRM 5.0 + DB MSSQL 2003 + OS Win 2003 Server

Hi All,
Im doing a System Copy using export and import method i.e using SAPINST. Export has been completed and now when im doing the import. it stops at Import Java dump and give me this error in
Jload.java.log
Apr 23, 2009 5:29:56 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: com.sap.dictionary.database.dbs.JddException: CREATE TABLE CAF_RT_MAPRLE failed
17:29:56 2009-04-23 dbs-Info: <<< Analyze table CAF_RT_MAPRLE >>>
17:29:56 2009-04-23 dbs-Info: predefined action is: >>>null<<<
17:29:56 2009-04-23 mss-Info: table CAF_RT_MAPRLE doesn't contain data
17:29:56 2009-04-23 dbs-Info: Action: DROP_CREATE
17:29:56 2009-04-23 ope-Info: Action: DROP_CREATE not possible
     at com.sap.inst.jload.db.DBTable.create(DBTable.java:109)
     at com.sap.inst.jload.Jload.dbImport(Jload.java:278)
     at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
     at com.sap.inst.jload.Jload.main(Jload.java:621)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Apr 23, 2009 5:29:56 PM com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
Has any one seen this error ???
Regards,
Ershad Ahmed

Hi,
I would refer the concerned System copy guide "[System Copy for SAP Systems Based on NW 7.0 SR2 ABAP+Java|https://websmp108.sap-ag.de/~sapdownload/011000358700006457662006E/SYSCOPY_2004sSR2_ABAPJava.pdf] " along with this [SAP Note 151603 - Copying an SQL Server database|https://service.sap.com/sap/support/notes/151603] for getting all answers.
All prerequisites / steps are well mentioned in that documents. Please read them carefully.
Regards,
Bhavik G. Shroff

Detail about System Copy / Migration. (URGENT)

Hi! Friends,
I got a new internal project. That is I have to build a new R/3 4.7 (SR1) 1.10 IDES system from the existing one to a new hardware (Server).
Details :
Current : SAP R/3 4.7 (SR1) 1.10 IDES with Kernel 6.20 NU
OS : Windows 2000 AS
DB : Oracle 8.1.7.4.1
Proposed : SAP R/3 4.7 (SR1) 1.10 IDES with Kernel 6.20 NU
OS : Windows 2003 R/2
DB : Oracle 9.2 or 10.2g
I have gone through the sap pdf docs. But still not sure.
My questions are :
1) How to take backup current system data. With conventional db13 or any other way ?
2) After installing CI in new server how to use R/3load to
import the backup data to create DI for new system?
3) Can I use Transport the client-dependent and client-independent data here? If yes, How?
Can you please guide me with detail steps.
Advance Thanks and regards,
Pratip

Hi! Linder,
Thanks very much for U R prompt reply.
1)     I am confused. <b>As SAP saying As I understand the process, if you wish to upgrade OS and DB in the same step, you must do a hetrogenous system copy.</b> And U R saying it it a <b>Since this will be a homogeneous copy, no migration key is required.</b>
2)     As I donot have Oracle 8.1 CDs so first either I have to install Oracle 9i or 10.2g DB software. In that case your first solution Oracle datafile copy will be vapplicable or not? If yes can U pl. give me the detail procedure?
3)     What is the easy option ? using tools like R3load, R3ldctl and R3szchk or using SAP installation disk at the time of DI installation?
4)     Can you please explain step by step of the procedure You must first make an export and then do an installation with the created export set instead of the export set from CD.
Waiting for UR reply.
Thanks and regards,
Pratip

System copy pdf

Similar Messages

Maybe you are looking for