System copy problem...No transfer rules available
Hi ,
We are facing a problem in getting the Transfer Rules...
1.we did a system copy from PRD system and created a Sandbox system .
2.After the system copy the problem came from the source system.....i.e for the datasource's in the table RSOLTPSOURCE the mapping is showing for 2 systems....CRM PRD system & CRM SANDBOX system....
3.Coz of this issue the Transfer rules are not available and the all the DS are inactive......
4.I tried with the FM RS_TRANSTRUC_ACTIVATE_ALL but im getting message as no transfer structure is available.
5.When i tried to manually activate the DS from BW side it is asking to create TRANSFER RULE.
Please help me to sort it out.....
Thanks in Advance
BASKAR
HI ,
I also raised a OSS to SAP ....what they suggested is....
According the logs in BWS there was definitely a systemcopy from BWP to BWS, but the BDLS logs looks very strange, which actually did not converted anything, because the administration tables containing some very strange entries.
Lets take the datasource 0crm_sales_act_1 for example. If you check this datasource in table RSOLTPSOURCE you can see, that it exists currently for both source systems:
OLTPSOURCE LOGSYS OBJVERS
0CRM_SALES_ACT_1 CMPCLNT501 A
0CRM_SALES_ACT_1 CMSCLNT501 A
Unfortunately the root cause of this is unkown, but most probably it is caused by an improper copy procedure, where the consulting note
886102 was not followed.
To solve the problem, please follow the below steps:
1. Implement note 1405233 and 1336119 to your system 2. Go to RSA1 and delete the source System CMS.
3. With function module rsar_logical_system_delete delete the source system CMP:
I_LOGSYS CMPCLNT501
I_FORCE_DELETE X
I_NO_TRANSPORT X
I_NO_AUTHORITY X
4. In your productive BW (BWP) please create a transport request which contains all the source system dependent objects for CMP. Please check note 886102 scenario B3 step 2 for details.
5. In BWS, please recreate the source system to CMS and activate it but please do not replicate the datasources yet.
6. In BWS please maintain the table RSLOGSYSMAP and map CMP to CMS and import the transport request created in step 4.
Please be aware, that such a constellation happens mostly, if some steps are missed or are not carried out properly from consulting note 886102. Please get in touch with your basis colleagues and provide them this note, so the next time such a problem does not occur.
I hope this helps to solve the problem.
Thanks
BASKAR
Similar Messages
-
0CRM_OPPT_H Infosource extraction problem (no transfer rules from Content)
Hi there,
I'm having a problem with 0CRM_OPPT_H infosource on BW 7.0 and Content version 703 SP9.
After activating the object from content there is no transfer rules for header infosource, item infosource is ok and I'm getting data. I've tried to created a DTP from scratch but I'm not geting data from source system. I've tested getting data from source system with RSA3 extraction test and it's working fine.
I've been checking on sdn and tested changing authorizations but it doesnt work.
Any ideas ??? It's normal I'm not getting transfer rules from content? Why I can not assing Datasource 0CRM_OPPT_H to inforsource 0CRM_OPPT_H??
Thanks in advance,
Regards,
CarlosI believe I had the same problem as you did. When you're installing the Business Content in BI you have to make sure BI knows which source systems you're installing BC from.
Go to RSA1 -> BI Content
In the Edit drop down menu choose "Source System Assignment"
Make sure your CRM and BI system are checked in the window that pops up. Try collecting for the 0CRM_OPPT_H again and see if the objects you're missing show up this time. If that doesn't work search through the specific object types for items you're missing. For example, search transfer rules for "0CRM_OPPT*" or just "0CRM_OPPT" (i'm not sure if the wildcard is valid in this instance) and see if what you're looking for shows up in the list.
Hope this helps. -
BE3.5 : Error from the source system while activating the transfer rule
When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
ArunabhaHi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers! -
Dear Expert:
I try to do BI system copy.
But got an error when I tried to backup from source system .
Error during "Import ABAP" phase in step "runMigrationMonitor"
I had already read the note 970518.
But the solution is not working for this problem.
Here is the error message below:
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Please Help~
Thanks~
Regards
Jack LeeDear Expert:
Here are logs below~
In sapinst.log
WARNING 2009-04-16 13:08:45.329
Execution of the command "C:\j2sdk1.4.2_16-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.exp.ExportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_16-b05, mixed mode)
Export Monitor jobs: running 1, waiting 0, completed 72, failed 0, total 73.
Unloading of 'SAPAPPL0_1' export package: ERROR
Export Monitor jobs: running 0, waiting 0, completed 72, failed 1, total 73.
ERROR 2009-04-16 13:08:45.329
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) export_monitor.java.log, export_monitor.log.
ERROR 2009-04-16 13:08:45.392
FCO-00011 The step runMigrationMonitor with step key |NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) export_monitor.java.log, export_monitor.log.).
*In export_monitor.java.log*
java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_16-b05, mixed mode)
Export Monitor jobs: running 1, waiting 0, completed 72, failed 0, total 73.
Unloading of 'SAPAPPL0_1' export package: ERROR
Export Monitor jobs: running 0, waiting 0, completed 72, failed 1, total 73.
In SAPAPPL0_1.log:
D:\usr\sap\BWD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090416114013
D:\usr\sap\BWD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
D:\usr\sap\BWD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
D:\usr\sap\BWD\SYS\exe\uc\NTAMD64\R3load.exe -e SAPAPPL0_1.cmd -datacodepage 4103 -l SAPAPPL0_1.log -stop_on_error
(DB) INFO: connected to DB
(GSI) INFO: dbname = "BWDBWDEV "
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "BWDEV "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "BWDEV"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "16x AMD64 Level 15 (Mod 4 Step 8)"
(GSI) INFO: instno = "INITIAL "
(EXP) ERROR: DbSlPrepare/BegRead failed
rc = 103, table "/BI0/0100000020"
(SQL error 208)
error message returned by DbSl:
Invalid object name '/BI0/0100000020'.
Statement(s) could not be prepared.
(DB) INFO: disconnected from DB
D:\usr\sap\BWD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\BWD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090416114017 -
I have the following message when I try to open a transfer rule
Transfer Rules 2LIS_03_S642_BB are Missing
InfoSource Extraction using 2LIS_03_S642
Cannot Restore
You Now Have to Recreate All Rules with Changes
Do You Want to Create this Identifier Now?
If I say yes it does not allow me to since it asks me to specify a transport which I do but it cannot recognise. Does anyone have a solution? I have run the programs RSAR_TRANSTRUCTURE_CHECK and RS_TRANSTRU_ACTIVATE_ALL which makes no difference. Thankshi Niten,
possible your infosource assigned with datasource that source system not exist anymore ?
if no own created routines in transfer rules, perhaps try to activate again from business content infosource 2LIS_03_S642 with dataflow before ?
hope this helps. -
Java system copy problems with the Java Migration Toolkit
During the JAVA system copy, we have have got the error in second last
step i.e;Java Migration Toolkit. We tried to do the system copy twice
but every time we have got the below error.
Is this a know bug? I have got the OSS note 966752 but the value
of 'src.ci.host' is already correct. has anybody come across the similar issue. please help.
" CJSlibModule::writeInfo_impl()
Output of /usr/java14_64/bin/java -
classpath /usr/sap/CMT/SYS/global/sltools/sharedlib/launcher.jar:. -Xj9
com.sap.engine.offline.OfflineToolStart
com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/CMT/SYS/global/sltools/jmt:/usr/sap/CMT/SYS/global/sltools/sharedlib import.switch
resume downtime mti.properties is written to the
logfile /home/cmtadm/CI_Import_08312009/runJmt.log.
WARNING 2009-09-01 20:49:43.473
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/java14_64/bin/java -
classpath /usr/sap/CMT/SYS/global/sltools/sharedlib/launcher.jar:. -Xj9
com.sap.engine.offline.OfflineToolStart
com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/CMT/SYS/global/sltools/jmt:/usr/sap/CMT/SYS/global/sltools/sharedlib import.switch
resume downtime mti.properties" finished with return code 27. Output:
ERROR 2009-09-01 20:49:43.477
CJSlibModule::writeError_impl()
CJS-20068 Error when running the J2EE Migration Toolkit.<br>SOLUTION:
See output of logfile /home/cmtadm/CI_Import_08312009/runJmt.log: ''.
ERROR 2009-09-01 20:49:43.479
CJSlibModule::writeError_impl()
CJS-20068 Error when running the J2EE Migration Toolkit.<br>SOLUTION:
See output of logfile /home/cmtadm/CI_Import_08312009/runJmt.log: ''.
ERROR 2009-09-01 20:49:43.480 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step RunMigrationController with step key
|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|RunMigrationController was executed with status ERROR ."
There is no log file by the name runJmt.log.
Regards,
SagarThis issue was resolved by OSS note 966752 itself. Below is the important line in the OSS note.
Note: The default value is crucial! If a custom value other than the default value was applied, we highly recommend that you restore the default value.
Thanks,
Sagar -
MaxDB upgrade/heterogeneus system copy problem with unicode conversion
Project goal:
upgrade a Content Server Version 7.3.0.35 32bit Non Unicode to
version 7.6.06.16 64bit Unicode
I found and followed note 962019
My plan (following the note):
-create a clone of the original Content Server (vmware clone)
-as per note 962019 patched server 7.3.0.35 to 7.3.0.62 (> 7.3.0.57)
-created index
-on a fresh installed windows 2003 server 64bit i installed Content Server with build 7.6.06.16
-using loadercli from the target server (7.6.06.16) exported data
Now i was ready to start the import, as the note states:
"if the database parameter _UNICODE is set to the value NO and you want to start the target system with SAP MaxDB Version 7.6, you can use procedure described here for the import into a target system only with SAP MaxDB Version 7.6.05 build 11 or higher"
Having version 7.6.06.16 i was confident on such procedure, but my import stops immediatly with error:
D:\exportKpro>loadercli -d PRD -u SAPR3,SAP -b import.sql
Loader protocol: 'C:\Documents and Settings\administrator\My Documents
\sdb\loader\log\loader.log'
Loader packages: 'C:\Documents and Settings\administrator\My Documents
\sdb\loader\packages'
Error connecting user SAPR3 to database PRD on local host: -25005
User (SAPR3) logon to database PRD failed: SQL error -8046 = Conversion from UNI
CODE impossible: 7600 (error position: 1)
And now i'm stuck with no hints on how to proceed.
Thanks in advance.
Regards
Simone ZaffalonHello Simone,
as you're staying on Windows platform, there is no need for a heterogenous system copy.
All you've to do is to upgrade the 32-Bit installation to your target release (why not use MaxDB 7.7 right away?).
Once this is done, you can check whether the database catalog is still non-unicode (_UNICODE=FALSE).
If it is, there is a catalog migration procedure you can use to change this.
If the 32-Bit database is as you want it, take a full data backup.
Then uninstall the 32-Bit software, install the same version of MaxDB in the 64-Bit fashion.
Finally create the db instance by a restore of the backup.
After a load_systab your database is fully ready to go!
Just to stress this again: the _UNICODE parameter is not about your data!.
It's about the database catalog.
Having this parameter set to YES you can create e.g. tables named with Unicode characters.
The parameter does in no way affect your business data!
Since many customers ask why they should't use loadercli for a scenario like this:
a) It's only supported if you must use it, that is, you change the byte-order of the OS platform
b) it's way faster than export and import. We're talking about a few hours compared to days here!
c) It's much safer and controllable to use backup/restore and SDBUPD and move on step-by-step than exporting all data into a big file chunk and hoping that everything will be fine afterwards.
regards,
Lars -
Problem in transfer rules-- Calling the function module.
Hi All,
when we r extracting the data from r3, the infoobject 0wbs_elem the data pulled is in internal format in which wbs element is stored.
wbs element gets stored in a different way compared to front end.
Eg. The external format is /abc/123 the internal format is 00012300.
I have written a transfer routine using the function module CONVERSION_EXIT_ABPSP_OUTPUT.
the code goes like this
data ifield(30) type c.
call function CONVERSION_EXIT_ABPSP_OUTPUT
Exporting
input = tran_structure-wbselem (Field in transfer structure---name of the field in source system) .
Importing
output = ifield.
result = ifield.
End of code.
Problem
When I am Scheduling the package the job doesnt get completed for a long time and fails.Is there a problem with the code. When trying for the Simulation of the datapackets, the system says no data package number could be determined.
Please help me out...
Thank You
MaheshHi Mahesh,
Could you please check ST22 and see if there is any short dumps ?
try to do test run for the FMs using SE37 and see what is the output for your input.
Do you have PSA for the load ? It may also have been deleted. You get this message when there is no PSA available.
hope it helps
Thanks
Soumya -
Hello,
I am doing a systemcopy with backup / restore from System X69 to Q69 on a different server. Therefore I did an online backup to file, copied it to target server a try to restore the database.
I have executed the command
brdb6brt -bm RETRIEVE -ts 20140806083346 -user db2x69 -using Password
to create the redirect commands.
The result (without comments):
UPDATE COMMAND OPTIONS USING S ON Z ON Q69_NODE0000.out V ON;
SET CLIENT ATTACH_NODE 0;
SET CLIENT CONNECT_NODE 0;
ECHO @./X69_NODE0000.scr@;
RESTORE DATABASE X69
USER db2q69 USING xxxxxxxx
FROM /db2/backup
TAKEN AT 20140806083346
ON /db2/Q69/sapdata4
,/db2/Q69/sapdata3
,/db2/Q69/sapdata2
,/db2/Q69/sapdata1
INTO Q69
NEWLOGPATH /db2/Q69/log_dir/NODE0000/LOGSTREAM0000/
WITH 2 BUFFERS
BUFFER 1024
REDIRECT
SET STOGROUP PATHS FOR IBMSTOGROUP ON '/db2/Q69/sapdata4','/db2/Q69/sapdata3','/db2/Q69/sapdata2','/db2/Q69/sapdata1' ;
After executing the script by db2 -tvf X69_NODE0000.scr I have executed db2 RESTORE DATABASE X69 CONTINUE
After this the ROLLFORWARD fails with error:
db2 => rollforward db Q69 to end of backup and complete
SQL0752N Connecting to a database is not permitted within a logical unit of work when the CONNECT type 1 setting is in use. SQLSTATE=0A001
If I terminate the session I get the error.
db2 => rollforward db Q69 to end of backup and complete
SQL1119N A connection to or activation of database "Q69" cannot be made because a previous restore is incomplete or still in progress. SQLSTATE=57019
How do I get the db2 to rollforward the logs of the ONLINE backup?
Best Regards
AndreasHello,
I have found one solution by doing all commands in a db2 dialog shell instead of a script.
After the successfull command restore database Q69 continue
DB20000I The RESTORE DATABASE command completed successfully.
Now I can do a get db cfg with the following output:
All committed transactions have been written to disk = YES
Rollforward pending = NO
Restore pending = YES
At this point I can not start a rollforward. The restore has been completed successfully but the status is still pending.
What can I do to use the database now?
Regards
Andreas -
BW Procedure System Copy - Problemas with transformations and DTP
Hello,
My Administration system have done a BW production copy to a BW non-productive system. After that, I have created a transport order in BW production with the option "with the source-system-dependent objects". Before I transport this order to BW non-productive system, I have deleted, in this system, the ancient source-system assignment.
When I have transported the order to BW non-productive system, the system I created transformation an DTP with another ID. I was expected that the ID was the same and not another one. Is this normal? What will happen when i tranport the changes form BW non-productive system to BW productive system?
Best regards.
Sérgio PintoHello Raghavendra,
But the BDLS report is not only for changing the logical name of the BW system? Is it possible to use this program in BW for changing the logical name of the source system than is assigned to the datasources?
By changing ID I want to say that the DTP with the ID DTP_4EC3YB6B6DT0OIH1TMBB0F5VG is change to the ID DTP_4K1H1XZ38M1CLVJ2IA8KFDQYY in BW no-productive system, after transport from productive to non-productive system.
Best regards.
Sérgio Pinto -
Transfer rules are not exist for ECC Quality source system in BI Dev
Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandraHi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks -
Transfer Rule copy in BW When client is changed ...Urgent please help
Dear Guru's
We have BI 7.0 System Connected with R/3 as S.system Which has two clients(Client 90 and client 10) , Earlier the Source System connection was with Client 90 and Exists feel Transfer rules and Ipackages, Now the Connection is changed to Client 10, So is there any possibility or a process that i can copy all these Transfer Rules and I package from (client 90)to (Client10), But not creating it manually again.
Can any one please suggest me some idea.
Thanks in advance
Dev
Edited by: Srinivas dev on May 29, 2008 11:44 AMHI
One small Qn.
The note is for changing the client or copying it from one S.system to another sys (Eg:- dev to production)
But in my case i have to change the client within Bw system , So that i can get all the transfer rule from one client to another
Thanks and Regards
Dev
Edited by: Srinivas dev on May 29, 2008 3:05 PM
Edited by: Srinivas dev on May 29, 2008 3:22 PM -
CLIENT of the source system in the Transfer Rules
Hi,
Can I get the CLIENT of the source system dynamically in the Transfer Rules (and assign it to an InfoObject)?
I have a generic extractor from a R/3 source system. The table in the source system & the extract structure the DataSource both contain MANDT, but its not coming in the RSO2 screen (which, if I'm not wrong, is how it should be).
I need the CLIENT info. in my BW data targets. I do not want to hardcode this value in Trans Rules as the client in Dev & Prod is different for my R/3 sys.
If I can't get it directly from the DataSource, is there any way I can get it from any system field using routine?
If I'm not wrong - SYST-MANDT in the Formulas will give me only my BW CLIENT.
Thanks in advance for your help.
Regards,
Melwynhi,
i think if your bw dev and prod client is different you can try in transfer rules
if sy-mandt = xxx. ( bw dev client number)
result = 'yyy'. (source system dev)
else.
result = 'zzz'. (source system prod)
endif.
or enhance the extract structure/ append structure with zz field for mandt and field in user exit zxrsau01 with sy-mandt
or if use infoobject 0LOGSYS, populate in transfer rules with result = g_s_minfo-logsys.
hope this helps. -
Activating transfer rules for new source system
Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
SujaiHi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V -
Transfer rules not availble in Business content
Hi,
In process of installting Purchasing module related business content I am facing problem with Transfer rules. I have activated all datsources related to Purchasing module in R/3 side and replicated in BW .
Except for 2 datsources all other replicated properly. the datasources 2lis_02_itm and 2lis_02_hdr replicated and are in modified version. why they are not in active verion. can anyone help me in this??
and when i go to business content only infosurce, communication structure are available for this datasources and transfer rules are not available. I tried the option sof delting the datsource and replicating again, activating the source system etc. and replicating it number of times.but nothing worked.
and another issue is when I replicated it didnt propmpt me anythng to selct the option of replciate in 3.x or 7.0 version.
Request anybody's help in this to get the transfer rules.
Thanks,
Kumar.Hello,
Install the business content for purhcasing properly in BI7.
If you install 2LIS_02_ACC for eg.. you will see... Cube/DSO-Transformation(TRCS)-Infosource-Transformation(RSDS)-datasource.
Sometimes the TRCS or RSDS will be inactive after installing... check the start routine of the transformation and correct accordingly..
Let us know how it goes..
Praveen Tati
Maybe you are looking for
-
ORA-20011: Approximate NDV failed: ORA-31000: Resource Error in Oracle 11g
Hi Friends, I am using Oracle 11.2.0.1 on linux (x64) and i am getting the following messages in Alert Log / Trace Log. Please let me know the fix. Alert Log: GATHER_STATS_JOB encountered errors. Check the trace file. Errors in file /u01/app/oracle/d
-
Hi All, How to Upgrade OracleAS 10g Forms from 10.1.2.3.0 to 10.1.2.3.1 in R12.1.2? Platform Linux and DB version 10.2.0.4. Thanks & Regards, Tharun
-
My CD drive isn't working properly
for the last week whenever I put a cd or dvd into the drive it takes it for about 10 seconds before it spits it out. I can hear that it's not even starting to spin the disc inside, no disc icon shows up on my desktop either so it's not even starting
-
I see some mp3 files in my all my files of my mac
Buddies, i already deleted all MP3 songs in itunes & libary, after that i find out some mp3 files are in that HD all my files. though i tried to delete, i can't touch them. is there anyone to solve this problem?
-
Music is duplicated in two separate accounts. How do we separate them?