System copy using SAPInst(Export Import database Independent prcoess failed
Hello ,
I am doing a System copy using SAPInst export/import process .
Source system : SAP Netweaver'04( BW 3.5 , Kernel : UC 640 ,Patch level 196 )
Export process fails at Phase 2 - Database Export at R3load jobs running 1,waiting 0 . Below is the log details
SAPSDIC.log
(EXP) INFO: entry for BAPICONTEN in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20000621155733
(EXP) INFO: entry for BAPICONTENT255 in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20031127161249
(EXP) INFO: entry for BAPICONVRS in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20010131174038
(EXP) INFO: entry for BAPICREATORDATA in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20000621155733
(EXP) INFO: entry for BAPICRMDH1 in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMDH2 in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMEXP in DDNTT is newer than in DDNTT_CONV_UC: 20051229175513 > 20031211120627
(EXP) INFO: entry for BAPICRMEXT in DDNTT is newer than in DDNTT_CONV_UC: 20051229175514 > 20031211120627
(EXP) INFO: entry for BAPICRMKEY in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMKEY_T in DDNTT is newer than in DDNTT_CONV_UC: 20051229175835 > 20031211120803
(EXP) INFO: entry for BAPICRMMSG in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMMSG_T in DDNTT is newer than in DDNTT_CONV_UC: 20051229175835 > 20031211120803
(EXP) INFO: entry for BAPICRMOBJ in DDNTT is newer than in DDNTT_CONV_UC: 20051229175514 > 20031211120628
(EXP) INFO: entry for BAPICRMPAREX_T in DDNTT is newer than in DDNTT_CONV_UC: 20051229175452 > 20031211120305
(EXP) INFO: limit reached, 5000 tables in DDNTT are newer than in DDNTT_CONV_UC
(EXP) INFO: NameTab check finished. Result=2 #20100113131216
(EXP) INFO: check for inactive NameTab entries: Ok.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
D:\usr\sap\B35\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\B35\SYS\exe\run/R3load.exe: END OF LOG: 20100113131216
***SAPCLUST.log ****
(NT) Warn: EDIDOC: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "EDIDOC"
(NT) Warn: PCDCLS: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "PCDCLS"
(NT) Warn: SFHOA: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "SFHOA"
(NT) Warn: SFHYT: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "SFHYT"
(NT) Warn: UMG_TEST_C: normal NameTab from 20040211095029 younger than alternate NameTab from 20031113150115!
(EXP) TABLE: "UMG_TEST_C"
myCluster (55.22.Exp): 712: error when retrieving alternate nametab description for physical table UMG_TEST_F.
myCluster (55.22.Exp): 713: return code received from nametab is 32
myCluster (55.22.Exp): 299: error when retrieving physical nametab for table UMG_TEST_F.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
D:\usr\sap\B35\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\B35\SYS\exe\run/R3load.exe: END OF LOG: 2010011312563
Please suggest.
Thanks & Regards
Ganesh
Is your DB unicode? If so, did you select the unicode flag in sapinst?
This [thread|System Copy Error while exporting ABAP; might offer some help.
-Zach
Similar Messages
-
System copy using R3load ( Export / Import )
Hi,
We are testing System copy using R3load ( Export / Import ) using our production data.
Environment : 46C / Oracle.
while executing export, it takes more than 20 hours, for the data to get exported, we want to reduce the export time drastically. hence, we want to achieve it by scrutinizing the input parameters.
during export, there is a parameter by name splitting the *.STR and *.EXT files for R3load.
the default input for the above parameter is No, do not split STR and EXT files.
My question 1 : If we input yes instead of No and split the *.STR and *.EXT files, will the export time get reduced ?
My Question 2: If the answer is yes to Question 1, will the time reduced will be significant enough ? or how much percentage of time we can expect it to reduce, compare to a No Input.
Best Regards
L RaghunahthHi
The time of the export depends on the size of your database (and the size of your biggest tables) and your hardware capacity.
My question 1 : If we input yes instead of No and split the *.STR and *.EXT files, will the export time get reduced ?
In case you have a few very large tables, and you have multiple cpu's and a decent disk storage, then splitting might significantly reduce the export time.
My Question 2: If the answer is yes to Question 1, will the time reduced will be significant enough ? or how much percentage of time we can expect it to reduce, compare to a No Input.
As you did not tell us about your database size and hardware details there is no way to give you anything but very basic metrics. Did you specify a parallel degree at all, was your hardware idling for 20 hrs or fully loaded already?
20 hrs for a 100gb database is very slow. It is reasonable (rather fast in my opinion) for a 2tb database.
Best regards, Michael -
System copy via SAPINST (Export/Import)
Hello!
We are using SAP ERP EHP4 system on Windows with SAP MaxDB (Version: 7.7.07.09).
We would like to copy this productive system to QAS system.
Therefore we successfully run SAPINST (with running db and sap, because we cannot stop productive system) with option Export and have currently an valid export of productive system.
After we read several sap notes (such as 1014782, 129352) we found that the system copy procedure Backup/Restore will be recomended.
Questions
1) Can we still copy productive system via export and import option with SAPINT?
1a) Should/must the SAP Max DB instance be installed before runing SAPINT on the target server?
1b) Which SAP MaxDB version should be installed on the target server?
Has some one experience with system copy of SAP systems with SPA MaxDB via Export/Import?
It will be great to get some answers or recommendation.You're back with a new ID after using:
Holger Thomasson
Jgen Pfeiffer
Thom Heinemann
H. Lemke
and now Tom Hermann.
too bad it took me so long to find you! -
Client Copy Using Client Export/Import
Hi Everyone,
This is regarding Client Copy Using Client Export/Import Method. We have two system Production and Development system. Iam planning to do a client copy from from PRD to DEV. I know most of the steps to perform Client Copy.I have some doubhts So if some one can please help me out i would really appreciate it.
!) I want to know which user should be used to perfrom Client Export ?
2) I want to know know which user to be used to perform Client delete?
3) Is there any particular USER who is recommended to perform Client Copy or any USER can do it?
4) After the Client Delete Procedure thorugh SCC5 ..to get back the client space we do Reorganization ? can anyone plzz tell me what are the tables that i need to reorganize or if anyone can provide me the steps for Reorganization i would be really thankful.
Waiting For your Replies
Best RegardsHi Mohammed,
1)I want to know which user should be used to perfrom Client Export ?
You can use your personal defined on the system UserID.
2) I want to know know which user to be used to perform Client delete?
Same as above, just make sure you have an account on the client and you log on to the right client
3) Is there any particular USER who is recommended to perform Client Copy or any USER can do it?
I am not aware that you should use a particular user. I have been doing copies/deletions with my UserID, as system administrator.
4) After the Client Delete Procedure thorugh SCC5 ..to get back the client space we do Reorganization ? can anyone plzz tell me what are the tables that i need to reorganize or if anyone can provide me the steps for Reorganization i would be really thankful.
Reorganization ( I personally) use SAPDBA tool. However -if you use ORACLE, there are other alternatives as well. What is your DB vendor? I will append more info in a bit.
Rgds,
Loukas -
System Copy using SAPINST on SRM 5.0 + DB MSSQL 2003 + OS Win 2003 Server
Hi All,
Im doing a System Copy using export and import method i.e using SAPINST. Export has been completed and now when im doing the import. it stops at Import Java dump and give me this error in
Jload.java.log
Apr 23, 2009 5:29:56 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: com.sap.dictionary.database.dbs.JddException: CREATE TABLE CAF_RT_MAPRLE failed
17:29:56 2009-04-23 dbs-Info: <<< Analyze table CAF_RT_MAPRLE >>>
17:29:56 2009-04-23 dbs-Info: predefined action is: >>>null<<<
17:29:56 2009-04-23 mss-Info: table CAF_RT_MAPRLE doesn't contain data
17:29:56 2009-04-23 dbs-Info: Action: DROP_CREATE
17:29:56 2009-04-23 ope-Info: Action: DROP_CREATE not possible
at com.sap.inst.jload.db.DBTable.create(DBTable.java:109)
at com.sap.inst.jload.Jload.dbImport(Jload.java:278)
at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
at com.sap.inst.jload.Jload.main(Jload.java:621)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Apr 23, 2009 5:29:56 PM com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
Has any one seen this error ???
Regards,
Ershad AhmedHi,
I would refer the concerned System copy guide "[System Copy for SAP Systems Based on NW 7.0 SR2 ABAP+Java|https://websmp108.sap-ag.de/~sapdownload/011000358700006457662006E/SYSCOPY_2004sSR2_ABAPJava.pdf] " along with this [SAP Note 151603 - Copying an SQL Server database|https://service.sap.com/sap/support/notes/151603] for getting all answers.
All prerequisites / steps are well mentioned in that documents. Please read them carefully.
Regards,
Bhavik G. Shroff -
Hi we are trying to do a system copy of a ABAP/ Java Addin - 70 SR3 from one system to another.
We took the sapinst option for Central BASED on ABAP and JAVA
We took the save restore option.
We are curretly stuck at the step Migration Export. Looking for the LABEL.ASC for
SAP:MIGSDM:700:::*
We took the java option to create the SDM export on the source system. My export location has the following :
LABELIDX.ASC
JDMP
SDM
APPS
LABEL.ASC
SAP:JMIG:700:::*
Any ideas / suggestions?
Regards,
Brian> I just started sapinst and selected "export central system based on ABAP + Java".
> There is an entry in the main export folder
> LABELIDX.ASC
> -ABAP
> -JAVA
>
> ABAP folder is empty
This is possible since you may have chosen the "database specific" copy. So the copy process will only pack the Java part which you will use later for the target system.
> JAVA folder has 3 files
> LABEL.ASC_
> - SAP:JMIG:700:::*
> LABELIDX.ASC
> -JDMP
> -SDM
> -APPS
Looks good!
If the export is finished you can start sapinst again on the target system, select again ABAP + Java and "database specific copy", the system will then start with the installation and stop at some point to restore the database. After that is done continue with sapinst.
Markus -
When we do system copy from one system on an existing system using SAPINST (Database independent method), Is it first necessary to delete the existing system, please advice.
I have read the guides available on it, but I was not able to get a clear understanding.
In system copy guide it says
If the target system already exists and you do not plan to perform an MCOD installation, delete the database on the target system before the import according to the corresponding description in the Additional Information section of the installation documentation for your SAP component.
If the database configuration of your database is stored in the file system, we recommend that you back these configuration files up before deleting the database.
I am little confused by it, does it mean delete complete system or database only -
Memory error while SYSTEM Copy using sapinst
Hi Experts,
I'm trying to do a system copy of portal sp14 from Dev to sanbox. I have exported from Dev and I'm in Sanbox phase 38 of 41 Install Java engine I'm getting following error.
Create SDM directories:
Create SDM home directory:
Directory for SDMHome '/usr/sap/JXD/JC00/SDM/program' doesn't exist yet.
Directory '/usr/sap/JXD/JC00/SDM/program' created
Create SDM root directory:
Directory '/usr/sap/JXD/JC00/SDM/root' created
Extracting packed repository.
Caught OutOfMemoryError
java.lang.OutOfMemoryError
InstallSDM was excecuted with status ERROR.
I thought I could change some heap size or other parameter using configtool, but it looks like it did not create j2ee directory where I could launch configtool.
Is there anyone who has faced this problem or have any idea how to resolve it?
Your answer is really appreciated and important.
Thanks in advanceIt has to be changed in control file at the following locaton
function readEntriesFromFile(filename,entry) {
// read out file filename and return all lines matching entry
// returns undefined, if file does not or exist or no matching line was found
:66601
case "OS400":
jdkArgs.push('-Xms256M');
jdkArgs.push('-Xmx1536M');
break;
case "OSF1":
jdkArgs.push('-classic');
jdkArgs.push('-Xmx64M');
break;
case "HP-UX":
jdkArgs.push('-Xmx64M');
jdkArgs.push('-XdoCloseWithReadPending');
break;
default:
jdkArgs.push('-Xmx64M');
break;
return jdkArgs; -
System copy based on export/import on MSCS
Hi,
a NW 7.0 istance (BW usage) on MSCS... we would like to copy to new host (as dev refresh). This MSCS is made of:
- host1 (first node)
- host2 (second node)
- mscdhost (mscs virtual host)
- orahost (oracle virtualhost... on a dedicated group)
- saphost (sap virtual host on a dedicate group)
Central istance is installed on host1 and a dialog istance is installed on host2.
So for the export I run sapinst (Software Life-Cycle OptionsSystem Copy / Oracle / Source System / Distributed System / High-Availability System / Based on ABAP and Java):
Preparation as: sapinst.exe SAPINST_USE_HOSTNAME=orahost
Table splitting as: sapinst.exe SAPINST_USE_HOSTNAME=orahost
Db Export as: sapinst.exe SAPINST_USE_HOSTNAME=orahost
Central Istance as: sapinst.exe SAPINST_USE_HOSTNAME=host1
Is it OK?
Regards.Hi,
Please refer this thread [BW system copy in MSCS|BW system copy in MSCS;.
Regards,
Bhavik G. Shroff -
ABAP+JAVA system copy using 3rd party export/import tools
Hi all,
I am trying to do a homogenous system copy. I am following the syscopy guide for SAP NW 7.0 SR3 ABAP+JAVA systems
We are running AIX 5.L and Oracle.
My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
I know it is possible to restore the database from an offline backup using BRTools rather than r3load and jload, and I just wanted to see if I can restore from a snap as it would save a lot of time in the procedure.
Any help or ideas would be much appreciated.
Thanks!>My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
That approach is not supported.
The reason is: combined instances write the instance name and hostname in various places, on the filesystem in .properties files, in the JDBC configuration, depending on the java applications you run on top in various other places. What you're trying to do is effectively "renaming" an instance.
Technically it's possible to do it and to get it run, yes, but the supported way is running sapinst and choose ABAP + Java system copy. This will prevent you from lots of (not really documented) manual work after the copy.
Markus -
Homogeneous system copy using export/import on WIn/Ora
Dear experts,
i need to know the homogeneous system copy procedure using export/import method for following scenario as we are in the process of Data center migration of SAP systemsfrom location to another location.
Source system:
ECC6/BI7/APO(ABAP stack)
OS:WIndows 2003
D:B:Oracle 10g
Target System: New hardware installed on Virtual environment(VMware)
No change of SID
ECC6/BI//APO
OS:WINDOWS2008
D:B: Oracle 11g
It would be great if anyone can share the documentu2019s/links (Not SAP homogeneous system copy guide) which you have prepared for the homog. system copy using export/import on Windows/oracle as i have done the system copy using backup/restore for ABAP stack and export/import for Java stack so far.
Therefore i am not sure about this procedure/prerequisites/checklist needs to prepare as i have gone through the SAP guide but it is not step by step document.
CheersThere are two approacahes for your project
1) First wether to use Oracle11g on target database
2) Continue with Database Oracle 10.2 on traget database
If you want to use Oracle11.2 on your target database you have to search the installers which are supported for 11.2 database. If the installers are available then only you can install your target database using Oracle11.2.Other wise t use Oracle10.2.0.4 is supported on Win2008r2. You can use this version of Oracle database to build ur target database.It works fine . Absolutely no problem.
Later on you can upgrade the Oracle10.2 to 11.2 Onwards.
If installers are avialble you can use Oracle11.2 also. There is absolutely no problem.
As per my knowledge installers are available and supported with Oracle11.2.Also check the PAM before arriving on any deciscion. -
How to perform system copy using standard sap method (sapinst)
Hi guys
pls tel how to perform system copy using standard sap method (sapinst) and to perform enterprise portal RESTORSTION.
thanks
kamalHi Kamal,
I have done a system copy of the production portal to a sandpit system before. The system copy export import method works very well, and is easy. For my portal, the whole procedure took me less than 6 hours.
1. Go to this page: System Copy and Migration
2. See the videos "Demo: How to Perform a System Copy Export" and "Demo: How to Perform a System Copy Import".
This should give you the basic idea.
I did a systemcopy using sapinst. If I remember right, this is the steps I performed:
1. On target host, Installed a new Central services.
2. On source host: Ran sapinst system copy export for Central Instance and Database instance. This created two export files (depending on your database size).
3. Used the export files created in previous step to run the import step in target host.
4. Some post processing steps, like configuring sso, creating systems in system landscapes, configuring WD JCos etc.
Let me know if you need more help.
Cheers
Rishi -
In the same site is that possible to use stsadm export/import to copy subsite to a new diff subsite name?
I do not want to use the SaveAs Template method, I need command mode.You should create an empty site.
Go to your site collection and click siteactions --> new site --> Select custom template, click create.
Here you choose meeting2 as Title/url
Now execute your import command (Import-SPWeb http://vee:111/meeting2 -Path
C:\temp\meeting_exp.cmp -UpdateVersions -Overwrite)
Now wait, when the import is finished, check your site!
That should do it. -
Db2 homogenous system copy using DB specific tools.
Hi,
I'm currently doing a homogenous system copy using db specific tools option (DB2). I did an offline backup of the source system using db2 backup database command, then ran SAPinst (NW70SR2) on the source system to go through the export phase, no problem. On the destination system, I ran SAPinst (NW70SR3) to do the import phase and reached a point where SAPinst asked me to restore the database using db2 tools. I running command:
RESTORE DATABASE <SID> FROM "E:\backup_folder" TAKEN AT 20090617164332 TO "Q:" INTO <SID> NEWLOGPATH "F:\" WITH 2 BUFFERS BUFFER 1024 PARALLELISM 1 WITHOUT PROMPTING;
After running this command I get SQL0902C A system error (reason code = "") occurred. Subsequent
SQL statements cannot be processed.
sqlcode: -902
sqlstate: 58005
Some background information: I'm running this procedure to do a migrate the database from a 32 bit to 64 bit.
Am I doing something wrong? Do I need to run any other commands or prep on the detination system before running the restore command?One other thing you might have wanted to check was the physical memory on the target machine. Does the target have the same amount of memory as the source? If it is much smaller, sometimes there can be issues with starting up the database on the smaller machine. There is an instance level registry setting you can use to reduce the amount of bufferpool memory the database wants to use.
Another issue I have seen is that you may want to restore a 32-bit backup to a 32-bit instance. You can then upgrade then instance and database to 64-bit.
EDIT: Sorry, I didn't realize this thread was 2 months old.
Edited by: Derek Barrett on Aug 18, 2009 4:39 AM -
Client copy using Client Export... Failed .. Need ur advice
Hi guiys how ru all doin...
I hope some one can help me oout in this issue.iam working on sap
4.6c, windows 2003 server, oracle9.2.0.
we need to take client copy from production client 300 to dev
server using client export method so I have performed client
copy using client export.these are the list of steps which i
performed but still am facing an error.
Checklists /prerequisites before doing client export :
Source client i.e. Client 300 should be locked for all users
except Administrator.
Ensure that NO Users are logged in both NCCSAPPRD and NCCSAPDEV
Server.
Inform Downtime to Users.
At least 2 background work process should be there.
Take Offline Backup of both Production server & Development
server.
Following Jobs rescheduled for next day for Client Export
Process:
1)Collector_for_performance_monitor
2)Customer_evaluati on_information
3)Error reporting
4)Eu_out
5)Vendor_evaluation_information
6)Leave_en titlement
Remove scheduled job from DB:
1)Check opt
2)Analyze tab
Lock all users except administrator
Change database mode from Archive to Non-Archive mode
Logon in NCCSAPPRD in Client 300 the one which is to be Exported
1.Enter Transaction SCC8
2.Select the copy profile and target system NCCSAPDEV Server and
other fields as necessary.
3.Click on "Execute in Background" button.
4.Click on the "Schedule job" button.
5.Verify that all information is correct and click on YES
button.
6.Click on continue at the "Info Client Export" window.
7.Specify the start time and click on SAVE.
8.Specify an output device at the "Background print parameters"
window and click on SAVE.
9.Click on OK at the information window.
Monitor the Client copy using transaction SCC3.
when am going to transaction scc3 in that ->All transport
requests ->Exports -> in that my source client 300 is there when
am double clicking it its showing me list of how many times
client export has been performed in that my date is also there
when iam double clicking it and going to details tab this is wat
the error which its giving....
Log file:
nccsapprd\sapmnt\trans\log\NCPET00968.NCP
Preparation for export
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
Execution of the export pre-processing methods for request
NCPKT00968
Start:Sorting and compressing the object list
End:Sorting and compressing the object list
Start:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Creating project information
Start:Writing nametab information for key entries
End:Writing nametab information for key entries
Start:Version creation of the objects of the request NCPKT00968
End:Version creation of the objects of the request NCPKT00968
Start:Adjusting the object directory for the objects of the
request NCPKT00968
End:Adapting the object directory for the objects of the request
NCPKT00968
Preparation for export
End date and time : 200708104758
Ended with return code: ===> 0 <===
Mainexport
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
SQL error 1652 accessing GLFUNCA: ORA-01652: unable to extend
temp segment by 128 in
SQL error 1652 accessing PPOIX: ORA-01652: unable to extend temp
segment by 128 in
Incorrect export. Request is not imported.
Main export
End date and time : 20070810152923
Ended with return code: ===> 12 <===
This is the error which am getting in the transport log.
I tried to perform 4 times client copy. the first 2 times i got
the same error and the next 2 times it ended with return code
===> 4 <===.
Plzz anyone help me out in this issue as i need to perform it
again and this time i hope with ur help it should be
successful.
Waiting for ur replies
Best regardsThe problem you have is, that your TEMP tablespace is too small on the target system, you need to increase it.
Check Note 3155 - Termination due to tablespace overflow
Markus
Maybe you are looking for
-
Chart of Accounts out of order
Hi Guys, I have encountered this issue with several clients, where the chart of accounts got rearranged in such a way that the accounts got mixed up. The change log is grayed out (inactive) so we can't determine if there is any user who edited the c
-
Problem with SOCKS (formerly SOX)
when i upgraded to SOCKS from SOX, i got it to do a monthly clean and it wiped out my mac's ability to use keychains. the keychains still exist in the keychain file but the applications can't find the file. i tried emailing the developer about this b
-
HFM - Max Number of Entities ?
Hello HFM Community, We are currently in the process of building out a new HFM application that requires loading of 180,000+ entities. The 180k entities is a requirement and cannot be deviated from. My question, is there a system limitation on the ma
-
Would someone have any idea why my laptop sound suddenly sounds all garbled and how to troubleshoot and try to resolve the issue?
-
I just installed Directory server under linux, the slapd starts ok after installation. When I try ./start-admin I get this error: SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 05:54 failure: server initialization failed (Interrupted system call) Ive