System Core Dumped after Oracle patch upgrade 9.2.0.6 to 9.2.0.8
Hi,
We are continously getting dumps on our BW Central instance server after we did an Oracle patch upgrade from 9.2.0.6 to 9.2.0.8.
Following is our system environment
SAP Release.............. "640"
Application server....... "abci"
Operating system......... "SunOS"
Release.................. "5.10"
Hardware type............ "sun4v"
Database server.......... "abdb"
Database type............ "ORACLE"
Database name............ "ABP"
Database owner........... "SAPABP"
SAP kernel............... "640"
Database version......... "OCI_920 "
Patch level.............. "175"
Following below is the Core Dump that is generated for any process chains that we schedule on our BW server
Runtime Errors SYSTEM_CORE_DUMPED
Date and Time 14.04.2008 09:26:17
ShrtText
Process terminated by signal 11.
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPMSSY2" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server awci_ABP_00 on host awci (wp 5)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9780
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Kindly help.
Regards
Sachin
Edited by: Sachin N on Apr 14, 2008 12:26 PM
No. If the environment would be wrong the system wouldn´t start up.
Core dumps are in 99 % of the cases program errors (in the SAP kernel or in an interface (libdbora*)), misaligend accesses of data etc.
If you encounter such an error have a look in the C-Stack. If you can´t see where the error is happening opening an OSS call. Most of those errors are fixed by installing the latest patches for the kernel and the database interface.
Markus
Similar Messages
-
System core dumped "signal 4" post upgrade AIX 5.3 and upd oracle 9.2.0.8
I have a problem in SAP R3 4.7 ext 1.10 , aix 5.3 oracle 9.2.0.8.
only on application servers
My dump is
Errore run-time SYSTEM_CORE_DUMPED
Verific. il 21.01.2008 h 08:32:49
Process terminated by signal 4.
Causa dell'errore
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "ZGESTIONE_ARTICOLI" had to be terminated because the
ABAP
processor discovered an invalid system state.
Possibili soluzioni
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Analisi errori
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server assapof_PRD_10 on host assapof (wp 15)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9806
Indic. per la correzione
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
ave this file under another name.
f you cannot solve the problem yourself, please send the
ollowing documents to SAP:
. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
mbiente sistema
AP Release.............. "620"
pplication server....... "assapof"
etwork address.......... "10.58.19.21"
perating system......... "AIX"
elease.................. "5.3"
ardware type............ "00CB584E4C00"
haracter length......... 8 Bits
ointer length........... 64 Bits
ork process number...... 15
hort dump setting....... "full"
atabase server.......... "ars005sapdb"
atabase type............ "ORACLE"
atabase name............ "PRD"
atabase owner........... "SAPR3"
haracter set............ "it_IT.ISO8859-1"
AP kernel............... "640"
reated on............... "Aug 16 2007 21:01:48"
reated in............... "AIX 1 5 00538A4A4C00"
atabase version......... "OCI_920 "
atch level.............. "196"
atch text............... " "
upported environment....
atabase................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
AP database version..... "640"
perating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Utente, transazione.....
Client.............. 300
User................ "WNO1582198"
Language key........ "I"
Transaction......... "ZPOA_ANAG "
Program............. "ZGESTIONE_ARTICOLI"
Screen.............. "ZGESTIONE_ARTICOLI 0101"
Screen line......... 2
Informazioni punto di interr.
The termination occurred in the ABAP program "ZGESTIONE_ARTICOLI" in
"INIT_101".
The main program was "ZGESTIONE_ARTICOLI ".
The termination occurred in line 20 of the source code of the (Include)
program "ZGESTIONE_ARTICOLI_INIT_101O01"
of the source code of program "ZGESTIONE_ARTICOLI_INIT_101O01" (when calling
the editor 200).
Dettaglio cd. sorgente
000010 * *
000020 ***INCLUDE ZGESTIONE_ARTICOLI_INIT_101O01 .
000030 * *
000040 *& *
000050 *& Module INIT_101 OUTPUT
000060 *& *
000070 * text
000080 * *
000090 MODULE init_101 OUTPUT.
000100
000110 IF s_zmarc_poa IS INITIAL.
000120 GET PARAMETER ID 'WRK' FIELD zmarc_poa-werks.
000130 GET PARAMETER ID 'MAT' FIELD zmarc_poa-matnr.
000140
000150 CONCATENATE sy-mandt zmarc_poa-matnr
000160 zmarc_poa-werks
000170 INTO garg SEPARATED BY space.
000180
000190 CLEAR s_zmarc_poa.
> SELECT SINGLE * FROM zmarc_poa
000210 WHERE matnr EQ zmarc_poa-matnr
000220 AND werks EQ zmarc_poa-werks.
000230
000240 IF sy-subrc EQ 0.
000250 s_zmarc_poa = zmarc_poa.
000260 ELSE.
000270 * errore
000280 SET SCREEN 0.
000290 ENDIF.
000300 ENDIF.
000310
000320 SELECT SINGLE * FROM MARA
000330 WHERE MATNR = s_zmarc_poa-matnr.
000340
000350 PERFORM get_giacenza USING s_zmarc_poa-werks
000360 s_zmarc_poa-matnr
000370 mara-meins
000380 CHANGING giacenza_old.
please, help meThanks everyone for the response and help.
I completed the task yesterday with the permission method. However, I think I found the solution after completion. The trick lies at the oraInst.loc file. It lies at /etc directory for my case (AIX 5.3).
If you do a opatch lsinventory, it shows you the Central Inventory location and the location of orainst.loc. For my case, it is pointing to /oracle/DE1/920_64/inventory. Therefore, even though I am logging in as oraqa1 with all env and oracle settings correct, it still points to DE1 inventory.
I think modifying the Central inventory location in oraInst.loc will solve this problem. -
Hidden parameters appears after Oracle 11gR2 upgrade
Platform: HP-UX B.11.31 U ia64
Upgrading from: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Upgrading to : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Issue : There are around 130 hidden parameter appear after Oracle 11gR2 upgrade.
Before upgrade I have commented the hidden parameters on the PFILE. PFILE only to start the database for the Oracle 11gR2 upgrade.
Before upgrade, checking the hidden parameter:
SQL> SELECT name,description from SYS.V$PARAMETER WHERE name LIKE '\_%' ESCAPE '\';
optimizerextended_cursor_sharing_rel
optimizer extended cursor sharing for relational operators
allowlevel_without_connect_by
allow level without connect by
I am using client parameter file ( PFILE ) commented the hidden parameters highlighted above.
However after successful upgrade to 11gR2, creating SPFILE from the PFILE ( commented the hidden parameters) now i am getting 132 hidden parameters.
SQL> select count(1) from sys.V$PARAMETER where name like '\_%' escape '\';
COUNT(1)
132
SQL> select name from sys.V$PARAMETER where name like '\_%' escape '\';
name
aggregationoptimization_settings
alwaysanti_join
alwayssemi_join
andpruning_enabled
btree_bitmap_plans
bloomfilter_enabled
bloomfolding_enabled
bloompruning_enabled
complexview_merging
compressioncompatibility
connectby_use_union_all
convertset_to_join
costequality_semi_join
cputo_io
dimensionskip_null
eliminatecommon_subexpr
enabletype_dep_selectivity
fastfull_scan_enabled
firstk_rows_dynamic_proration
gbyhash_aggregation_enabled
generalizedpruning_enabled
globalindexpnum_filter_enabled
gsanti_semi_join_allowed
improvedouterjoin_card
improvedrow_length_enabled
indexjoin_enabled
ksbrestart_policy_times
leftnested_loops_random
localcommunication_costing_enabled
minimalstats_aggregation
mmvquery_rewrite_enabled
newinitial_join_orders
newsort_cost_estimate
nljbatching_enabled
optimadjust_for_part_skews
optimenhance_nnull_detection
optimnew_default_join_sel
optimpeek_user_binds
optimizeradaptive_cursor_sharing
optimizerbetter_inlist_costing
optimizercbqt_no_size_restriction
optimizercoalesce_subqueries
optimizercomplex_pred_selectivity
optimizercompute_index_stats
optimizerconnect_by_combine_sw
optimizerconnect_by_cost_based
optimizerconnect_by_elim_dups
optimizercorrect_sq_selectivity
optimizercost_based_transformation
optimizercost_hjsmj_multimatch
optimizercost_model
optimizerdim_subq_join_sel
optimizerdistinct_agg_transform
optimizerdistinct_elimination
optimizerdistinct_placement
optimizereliminate_filtering_join
optimizerenable_density_improvements
optimizerenable_extended_stats
optimizerenable_table_lookup_by_nl
optimizerenhanced_filter_push
optimizerextend_jppd_view_types
optimizerextended_cursor_sharing
optimizerextended_cursor_sharing_rel
optimizerextended_stats_usage_control
optimizerfalse_filter_pred_pullup
optimizerfast_access_pred_analysis
optimizerfast_pred_transitivity
optimizerfilter_pred_pullup
optimizerfkr_index_cost_bias
optimizerfull_outer_join_to_outer
optimizergroup_by_placement
optimizerimprove_selectivity
optimizerinterleave_jppd
optimizerjoin_elimination_enabled
optimizerjoin_factorization
optimizerjoin_order_control
optimizerjoin_sel_sanity_check
optimizermax_permutations
optimizermode_force
optimizermulti_level_push_pred
optimizernative_full_outer_join
optimizernew_join_card_computation
optimizernull_aware_antijoin
optimizeror_expansion
optimizerorder_by_elimination_enabled
optimizerouter_join_to_inner
optimizerouter_to_anti_enabled
optimizerpush_down_distinct
optimizerpush_pred_cost_based
optimizerrownum_bind_default
optimizerrownum_pred_based_fkr
optimizerskip_scan_enabled
optimizersortmerge_join_inequality
optimizersqu_bottomup
optimizerstar_tran_in_with_clause
optimizersystem_stats_usage
optimizertable_expansion
optimizertransitivity_retain
optimizertry_st_before_jppd
optimizerundo_cost_change
optimizerunnest_corr_set_subq
optimizerunnest_disjunctive_subq
optimizeruse_cbqt_star_transformation
optimizeruse_feedback
orexpand_nvl_predicate
orderednested_loop
parallelbroadcast_enabled
partitionview_enabled
pivotimplementation_method
prerewrite_push_pred
predmove_around
pushjoin_predicate
pushjoin_union_view
pushjoin_union_view2
pxminus_intersect
pxpartition_scan_enabled
pxpwg_enabled
pxual_serial_input
queryrewrite_setopgrw_enable
removeaggr_subquery
replacevirtual_columns
resourcemanager_plan
rightouter_hash_enable
selfjoinmv_duplicates
sqlmodel_unfold_forloops
sqltunecategory_parsed
subquerypruning_enabled
subquerypruning_mv_enabled
tablescan_cost_plus_one
unionrewrite_for_gs
unnestsubquery
usecolumn_stats_for_functionI just came across a similar case: 1 (just one) of our (RAC-) databases has 130-something underscore-parameters set to non-default values.
version is still 11.1.0.7 (e.g. not 11gR2).
All of those hidden parameters seem to be CBO related (list on request).
Weird is: Only one of our (very similar, supposedly same-config) databases have these hidden parameters set.
Colleagues justly wonder: Who, When, What has caused these parameters to be expliclty set for this one system?
Note: we do not have the complete history of this system documented (systems have been managed by 3 different parties already).
It is quite possible they came in with some patch or upgrade (catupgr?) somewhere between 11.1.0.1 and 11.1.0.7, but a confirmation would be nice.
Information welcome.
System info:
Linux hostname 2.6.18-164.9.1.el5 #1 SMP Wed Dec 9 03:27:37 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Versions
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
5 rows selected. -
JOB RSGENYTT - System core dump
Hi SDN,
While trying to upgrade our 4.6B system to ERP, JOB_RSGENYTT phase stops with a core dump, this is what i've in ST22
Someone knows how i can analyse this :S
regards
Pedro Rodrigues
ABAP runtime errors SYSTEM_CORE_DUMPED
Occurred on 17.11.2007 at 19:53:23
Process terminated by signal 0.
What happened?
Error in the SAP Basis system
ABAP/4 processor detected an internal system error.
The current ABAP program "RSGENYTT " had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Please make a note of the actions and input which caused the error.
Please make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
Choose "Print" for a hard coopy of the termination message. You can
display and adminster short dump messages using Transaction ST22.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server appserver_DEV_00 on host appserver (wp 0)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 8628
The error reported by the operating system is:
Error number..... " "
Error text....... " "
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "46B"
Application server....... "appserver"
Network address.......... "192.39.0.2"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Database server.......... "appserver"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "English_United State"
SAP kernel............... "46D"
Created on............... "Aug 16 2007 21:26:12"
Created in............... "NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00"
Database version......... "SQL_Server_7.00 "
Patch level.............. "2337"
Patch text............... " "
Supported environment....
Database................. "MSSQL 6.5.213 or higher, MSSQL 7.0.1 or higher"
SAP database version..... "46D"
Operating system......... "Windows NT 4.0, Windows NT 5.0, Windows NT 5.1,
Windows NT 5.2, , System build information:,
, LCHN : "
User, transaction...
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... "SE38 "
Program............. "RSGENYTT "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "RSGENYTT " in
The main program was "RSGENYTT ".
The termination occurred in line 0
of the source code of program " " (when calling the editor 00).
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1260
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1....+....2....+....3....+....4
LV_COUNT 0
0000
0000
LV_INDEX 0
0000
0000
LT_DDYTT Table[initial]
0000FFFD
0000FFFF
LT_DDYTF Table[initial]
0000FFFD
0000FFFF
LT_PUTTB_SHD ############################ #######ï###
000000000000000000000000000020000000E000
00000000000000000000000040000A001000F400
... + 40 ####ð###ð###################$###xæ-?ð#/?
1000F000F000000000008000000020007E23F823
00000800040000000000C0002000430086DF02FF
... + 80 #?4?########################5###
93330000000000000000000000003000
8F4F0000000000000000000000005000
LS_PUTTB_SHD /BEV1/CADD03VTV
2445324444335552222222222222222222222222
F2561F3144036460000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 002 7
2222222222222222333222222222222222232222
0000000000000000002000000000000000070000
... + 120 VLE
22222544
000006C
LV_SHD_DDXTT DDXTT~
445557222222222222222222222222
44844E000000000000000000000000
GC_BASREL_UPDATED U
5
5
LS_PUTTB_SHD-TABNAME /BEV1/CADD03VTV
244532444433555222222222222222
F2561F314403646000000000000000
LS_DDYTT ######
2222222222222222222222222222222222000000
0000000000000000000000000000000000000000
... + 40 ##########
0000000000222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 ##########
2222222222220000000000222222222222222222
0000000000000000000000000000000000000000
... + 120 ###### #########
22222222
0000000
SYST ############ï###########################
000000000000E000000000000000000000000000
000000001000F400000000000000000000000000
... + 40 ì#######################################
E000000000000000000000000000000000008000
C40000001000000010000000000000000000C000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000200000000000000000000000
... + 120 ########################################
00000000
0000000
SY-SUBRC 0
0000
0000
%_SSCR[] ############################`###########
0000000000000000000000000000600000000000
0000000000000000000000004000030000000000
... + 40 ################ÿÿÿÿ####################
1000000000000000FFFF00000000000000000000
0000000000001000FFFF41F07000430000000000
... + 80 ################################
00000000000000000000000000000000
00000000000000000000000000000000
10032c92 807d1400 cmp byte ptr ,0x0 ss:062ce90a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp ,ecx ds:070aeb72=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062ce90a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr ,0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr ,0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b4eb8 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f80 018b6470 018b4eb8 00000035 dbmssslib!dsql_db_init
031689c4 008f47dc 010035d0 00000035 00000001 018b6470 dbmssslib!DbSlVersion
031689f4 008f1120 00000001 00000000 3f2db20c 00000000 disp+work!
054fffb8 77e64829 03e7bf20 00000000 00000000 03e7bf20 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7bf20 00000000 00000000 kernel32!GetModuleHandleA
List of ABAP programs affected
Type Program Gen. date time LoadSize RollSize
Prg RSGENYTT 17.11.2007 18:56:44 112 3 840 loade
Prg SAPMSSY0 26.03.2001 12:10:18 1 6 512 loade
Prg RSDBRUNT 26.03.2001 12:09:07 19 22 376 loade
Prg RSDBSPBL 26.03.2001 11:21:26 24 6 512 loade
Prg SAPDB__S 01.06.1999 12:10:01 36 1 408 loade
Prg RSDBSPMC 01.06.1999 12:09:54 34 7 728 loade
Typ DDSHDESCR 03.09.1997 03:05:16 955 048 loade
Typ SPPARAMS 07.05.1997 13:10:38 956 024 loade
Prg SAPLSABE 01.06.1999 12:10:15 100 1 288 loade
Prg SAPLSECU 04.04.2001 18:30:22 28 6 608 loade
Prg SAPMSSY3 26.03.2001 10:57:11 269 5 368 loade
Typ ABDBG 25.05.1999 15:31:57 716 1 360 loade
Prg SAPMSSYD 22.03.2001 18:03:09 12 1 336 loade
Prg SAPFSPOR 19.10.1999 09:39:27 59 216 loade
Prg SAPLSCNT 01.06.1999 12:10:15 15 2 624 loade
Prg SAPLSVSM 22.03.2001 17:23:10 61 2 552 loade
Prg SAPLSGUI 26.03.2001 12:08:56 4 3 768 loade
Prg SAPLSTTM 22.03.2001 15:09:40 2 5 392 loade
Prg SAPLSBDC 22.03.2001 15:09:07 6 6 560 loade
Prg CL_DATAPROVIDER=============== 22.03.2001 16:53:29 62 4 128 loade
Typ OBJ_RECORD 14.02.1998 08:30:43 883 048 loade
Prg SAPLSTUP 26.03.2001 11:45:52 16 9 160 loade
Prg SAPLCNDP 26.03.2001 10:57:04 3 15 744 loade
Prg SAPSHDTV 26.03.2001 11:45:07 14 3 864 loade
Prg SAPFGUICNTL 26.03.2001 10:42:02 10 1 408 loade
Prg CL_GUI_CFW==================== 26.03.2001 11:21:21 11 13 192 loade
Prg SAPLOLEA 17.11.2007 13:23:33 5 7 656 loade
Prg SAPLSFES 26.03.2001 12:08:50 7 10 544 loade
Prg SAPLGRFC 22.03.2001 15:08:46 60 1 384 loade
Prg SAPLSTRF 17.11.2007 13:23:33 217 10 424 loade
Prg SAPLSTFI 26.03.2001 12:10:04 216 5 296 loade
Prg SAPLSUGI 17.11.2007 18:56:44 673 35 280 loade
Typ PUTTB_SHD 17.11.2007 11:26:20 682 120 loade
Prg SAPLSUGN 17.11.2007 18:56:44 691 5 296 loade
Typ DDFTX 05.11.1997 02:52:59 224 072 loade
Prg SAPLSDNT 17.11.2007 18:56:44 135 18 368 loade
Prg SAPLSDB1 17.11.2007 11:26:20 114 6 464 loade
Prg SDB1FMSS 04.04.2001 18:30:57 113 4 104 loade
Typ DDXTT 17.11.2007 18:56:44 235 048 loade
Prg RDTCMPTB 17.11.2007 18:56:44 414 10 376 loade
Prg SAPLSDB2 17.11.2007 18:56:44 225 39 216 loade
Prg SAPLSDB3 17.11.2007 18:56:44 271 9 136 loade
Prg SAPLSDD0 17.11.2007 13:23:33 133 5 200 loade
Prg RADIXTOL 01.06.1999 12:09:34 150 2 504 loade
Prg SDB2FDBS 17.11.2007 17:43:27 215 11 784 loade
Prg SAPLSDD2 01.06.1999 12:10:16 237 3 888 loade
Prg SDB2FMSS 17.11.2007 17:43:27 190 17 152 loade
Typ UVERS 16.07.1997 14:46:33 347 072 loade
Typ DD092526V 20.08.1998 11:15:55 781 048 loade
Typ X030L 05.11.1997 03:07:56 709 096 loade
Prg RADBTOUT 01.06.1999 12:09:34 124 10 448 loade
Prg SAPCNVE 01.06.1999 12:10:01 101 168 loade
Prg SAPLSDAD 17.11.2007 18:56:44 935 71 752 loade
List of internal tables
Header of PROG=RSGENYTTDATA=GT_PROT[]
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000000004000000500700000000000007000000
TABH+ 40(20) = 1E0000001E0000001E0000001E000000FFFFFFFF
TABH+ 60(20) = E3000000020000000403000018972D3F00000000
TABH+ 80(20) = 0000000000000000000000000000000000000000
TABH+100(12) = 000000000000000013000000
id = 19 (0x13000000)
fill = 7 (0x07000000)
lineAdmin = 30 (0x1E000000)
lineAlloc = 30 (0x1E000000)
tabi = 0x18972D3F
pghook = 0x00000000
index = 0x00000000
hshook = 0x00000000
btree = 0x00000000
reghook = 0x00000000
lopc = 0 (0x00000000)
occu = 30 (0x1E000000)
rank = 30 (0x1E000000)
loop = -1 (0xFFFFFFFF)
leng = 227 (0xE300)
fcnt = 0 (0x0000)
lock = 0
shrd = 0
access = 1 (stdAccess)
idxKind = 0 (noIndex)
unique = 2 (nonUnique)
cmpMode = 2 (cmpSingleMcmp)
pb_func = 0x00000000
pb_handle = 0x00000000
Directory of application tables (contents)
Program
Name.......... Contents.1........2........3....+....
Directory of data areas (administration information)
Program
No.. Name.......... Lgth Ofsg Type Next Gen date Gen time
SYST
L not assigned 751 0 IN
M /%_LISTTABLE 750 1 CO 0
T global stack 749 1 2 GL
RSGENYTT
A global data 0 3 DA
L constant dat 1 4 LI .0 .0472
L constant dat 2 5 LI .0 .0367
L not assigned 3 6 IN
L SYST 4 7 TA 00
L SY 5 8 TA
L RSJOBINFO 6 9 TA
M /%_SYS%% 7 0 CO
M field symbol 8 1 FS
M /%_SSCR 9 2 CO 0
L VARI 10 3 TA
L PUTTB_SHD 11 4 TA
L DDYTT 12 5 TA
L DDYTF 13 6 TA
M field symbol 14 7 FS
M field symbol 15 8 FS
M field symbol 16 9 FS
SAPMSSY0
A global data 0 0 DA
L constant dat 1 1 LI .0 .077E
L constant dat 2 2 LI .0 .06B8
L not assigned 3 3 IN
L SYST 4 4 TA
L SY 5 5 TA
L RSJOBINFO 6 6 TA
M /%_SYS%% 7 7 CO
M field symbol 8 8 FS
M /%_LISTTABLE 9 9 CO
M /%_SYS000 10 0 CO
L TFDIR 11 1 TA
M field symbol 12 2 FS
M field symbol 13 3 FS
L TRDIR 14 4 TA
L ABMSG 15 5 TA
M field symbol 16 6 FS
L text pool 17 7 TP
RSDBRUNT
A global data 0 8 DA
L constant dat 1 9 LI .0 .1B8A
L constant dat 2 0 LI .0 .1780
L not assigned 3 1 IN
L SYST 4 2 TA
L SY 5 3 TA
L RSJOBINFO 6 4 TA
M /%_SYS%% 7 5 CO
M field symbol 8 6 FS
M /%_SSCR 9 7 CO
L VARI 10 8 TA
L TRDIR 11 9 TA
L TUVID 12 0 TA
L RSVUVINT 13 1 TA
L VARID 14 2 TA
L DFIES 15 3 TA
L SSCRTEXTS 16 4 TA
L SSCRFIELDS 17 5 TA
M /%_DYN_SEL 18 6 CO
M /%_FIELD_SEL 19 7 CO
M /%_RUNT_XX_% 20 8 CO
M field symbol 21 9 FS
M field symbol 22 0 FS
M field symbol 23 1 FS
M field symbol 24 2 FS
M field symbol 25 3 FS
L text pool 26 4 TP
RSDBSPBL
A global data 0 5 DA
L constant dat 1 6 LI .0 .09CE
L constant dat 2 7 LI .0 .0908
L not assigned 3 8 IN
L SYST 4 9 TA
L SY 5 0 TA
L RSJOBINFO 6 1 TA
M /%_SYS%% 7 2 CO
M field symbol 8 3 FS
M /%_RUNT_XX_% 9 4 CO
L text pool 10 5 TP
SAPDB__S
A global data 0 6 DA
L constant dat 1 7 LI .0 .020D
L constant dat 2 8 LI .0 .01B0
L not assigned 3 9 IN
L SYST 4 0 TA
L SY 5 1 TA
L RSJOBINFO 6 2 TA
M /%_SYS%% 7 3 CO
M field symbol 8 4 FS
M /%_SSCR 9 5 CO
L VARI 10 6 TA
L text pool 11 7 TP
A global data 12 8 DA 0
RSDBSPMC
A global data 0 9 DA
L constant dat 1 0 LI .0 .0BD7
L constant dat 2 1 LI .0 .0AE8
L not assigned 3 2 IN
L SYST 4 3 TA
L SY 5 4 TA
L RSJOBINFO 6 5 TA
M /%_SYS%% 7 6 CO
M field symbol 8 7 FS
M /%_SSCR 9 8 CO
M /%_RUNT_XX_% 10 9 CO
1 L DD23L 11 0 TA
1 L DD23T 12 1 TA
1 L RSMDY 13 2 TA
1 M field symbol 14 3 FS
1 L text pool 15 4 TP
SAPLSABE
1 A global data 0 5 DA
1 L constant dat 1 6 LI .0 .014A
1 L constant dat 2 7 LI .0 .0101
1 L not assigned 3 8 IN
1 L SYST 4 9 TA
1 L SY 5 0 TA
1 L RSJOBINFO 6 1 TA
1 M /%_SYS%% 7 2 CO
1 M field symbol 8 3 FS
1 L TRDIR 9 4 TA
1 M field symbol 10 5 FS
1 L text pool 11 6 TP
SAPLSECU
1 A global data 0 7 DA
1 L constant dat 1 8 LI .0 .0918
1 L constant dat 2 9 LI .0 .070B
1 L not assigned 3 0 IN
1 L SYST 4 1 TA
1 L SY 5 2 TA
1 L RSJOBINFO 6 3 TA
1 M /%_SYS%% 7 4 CO
1 M field symbol 8 5 FS
1 L TSL1D 9 6 TA
1 L TPFYPROPTY 10 7 TA
1 M field symbol 11 8 FS
1 L text pool 12 9 TP
RSGENYTT
1 L ABDBG 127 0 TA
SAPMSSY3
1 A global data 0 1 DA
1 L constant dat 1 2 LI .0 .0A38
1 L constant dat 2 3 LI .0 .09BF
1 L not assigned 3 4 IN
1 L SYST 4 5 TA
1 L SY 5 6 TA
1 L RSJOBINFO 6 7 TA
1 M /%_SYS%% 7 8 CO
1 M field symbol 8 9 FS
1 M /%_LISTTABLE 9 0 CO
1 M /%_SYS000 10 1 CO
1 L ABDBG 11 2 TA
1 M field symbol 12 3 FS
1 Y 13 4 LA 0
1 Y 14 5 LA 0
1 Y 15 6 LA 0
1 Y 16 7 LA 0
1 Y 17 8 LA 0
1 Y 18 9 LA 0Hi lucio,
thanks for your quick answer, update of DW didn't work, here you are dev_w22 trace
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 18:30:29 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 5400
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 5400) [dpxxdisp.c 976]
I MtxInit: -2 0 0
I
I Mon Nov 19 18:30:31 2007
I *** ERROR => New Process with the same PID
ERROR_INVALID_ADDRESS: Attempt to access invalid address. [semnt.c 1513]
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M ThSysUsrCheck: clear T22
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 183031
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86F10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Mon Nov 19 18:40:15 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
C The IRow interface is supported by this OLEDB provider
M
M Mon Nov 19 18:40:18 2007
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000094) [dpnttool.c 390]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000094 (Divide by zero)
App : disp+work.EXE (pid=5400)
When : 11/19/2007 18:40:18.134
Threads : 2
Computer Name : APPSERVER
User Name : SAPServiceDEV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 151c
eax=0000a000 ebx=00000000 ecx=00000000 edx=00000000 esi=03f48b54 edi=00000000
eip=10032cab esp=031688b0 ebp=031688dc iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010206
function : <nosymbols>
10032c92 807d1400 cmp byte ptr [ebp+0x14],0x0 ss:062cfc7a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp [esi+0x8],ecx ds:070afef2=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062cfc7a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr [EndFastload+0x19644f (101d5ad9)],0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr [EndFastload+0x196322 (101d59ac)],0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b76f0 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f90 018b8ca8 018b76f0 00000035 dbmssslib!dsql_db_init
031689c4 008f4765 010056b8 00000035 00000001 018b8ca8 dbmssslib!DbSlVersion
031689f4 008f10a9 00000001 00000000 3f26827c 00000000 disp+work!<nosymbols>
03168a74 008f05ff 00000000 3f26827c 00000000 3f2682ec disp+work!<nosymbols>
03168a9c 008a2873 00000000 018b769c 3f2682ec 00000000 disp+work!<nosymbols>
03168b48 0089ef88 00000000 3f26827c 3f2682ec 03168d0c disp+work!<nosymbols>
03168b5c 008a1714 3f261654 00000000 00000000 00000000 disp+work!<nosymbols>
03168d0c 0089d4ec 00000000 3f26827c 3f2682ec 00000000 disp+work!<nosymbols>
03168ea0 0061f5f7 00000000 3f26827c 3f2682ec ffffffff disp+work!<nosymbols>
03168edc 00616212 00000007 03168ef8 0316f130 00000000 disp+work!<nosymbols>
03168f1c 005bf6a0 00000008 29339f2c 00000000 3f2918e0 disp+work!<nosymbols>
0316f140 00629e43 00000000 00000000 0316f170 00000001 disp+work!<nosymbols>
00e5bc44 00000000 49444553 00000000 4f525f25 0000544f disp+work!<nosymbols>
Stack Dump for Thread Id 5f4
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00380000 esi=00000000 edi=00000000
eip=7c8285ec esp=054ffc74 ebp=054ffcb8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:054ffc74=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:08667013=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
054ffcb8 00c3475c 00000688 00000000 00000000 03e7be00 ntdll!KiFastSystemCallRet
054fff84 77bcb530 00000000 00000000 00000000 03e7be98 disp+work!<nosymbols>
054fffb8 77e64829 03e7be98 00000000 00000000 03e7be98 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7be98 00000000 00000000 kernel32!GetModuleHandleA
M -
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 22
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 22
M mode = 0
M len = 24
M rq_id = 139
M rq_source = 1
M rq_info = 8576
M last_tid = 22
M last_mode = 0
M int_checked_resource = 0
M ext_checked_resource = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appserver_DEV_00 on host appserver (wp 22)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 19 18:40:18 2007
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 8628
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALL_HOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M Entering ThSetStatError
M *** WARNING => sql break failed (-1)
M ThErrHandle: don't try rollback again
M ThErrHandle: call ThrCoreInfo
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C retry with SQL statement string
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 022 000 R/3 000000 ACTIVE YES YES NO 20071119 183031
B Disconnected from connection 0
B statistics db_con_commit (com_total=5, com_forced=1, com_tx=1)
B statistics db_con_rollback (roll_total=0, roll_forced=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc22 5400) [dpnttool.c 310]
M return from clean-up function ...
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 18:40:34 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 432
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 432) [dpxxdisp.c 976]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 184034
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86BF0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T22/U23/M0/I2
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M ThCheckPrevUser: reset spa state for user T22/U23/M0
M LOCK WP ca_blk 216
M LOCK APPC ca_blk 72
M set task type ZTTABTC
M ThCleanPrevUser: clean U23 T22 M0 I2 clean state DP_DEFAULT_CLEANING from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThCheckEmState: check ATTACH for em hdl 1
M ThCheckEmState: call EmContextAttach (em_hdl=1)
M ThIAMDel: delete tid/mode 22/0 (th_errno 23, release 1)
M ThTSCancel: set T22 M0 in status MODE_CANCEL
M ThIDeleteMode (22, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M ThSUsrDel: clean batch after error (23)
C The IRow interface is supported by this OLEDB provider
M ThScheduler: server name: appserver_DEV_00
M ThISendMsg: send message (5) to server (wp) with name >appserver_DEV_00 <
M ThISndName: send to name: >appserver_DEV_00 <
M ThISend: (tm/user/type = 22/DDIC /0x2000, mode_deleted=0)
M MSG_NAME
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat: new state of T22/M0 = 0xc2
M ThISend: new wp stat: 0x0
M Adresse Offset Message by name (one way)
M -
M 0639A0C0 000000 00000000 05000000 255f4556 454e545f |........%%_EVENT_|
M 0639A0D0 000016 53434845 44554c45 52002020 20202020 |SCHEDULER. |
M -
M ThMkReq: send output to canceled mode
M make DISP owner of wp_ca_blk 216
M put request into queue (reqtype 0, prio LOW, rq_id 158)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 216 wp_id 22
M -OUT- action SEND_MSG_ONEWAY uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat NO_CHANGE mode 0 len 268 rq_id 158
M -OUT- forward DIA
M -OUT- req_info CANCELMODE MSG_WITH_REQ_BUF MSG_WITH_OH
M NiPHostToAddr: read hostaddr 127.0.0.1 from operating system
M NiIHostToAddr: hostname localhost = addr 127.0.0.1
M NiPServToNo: read servno 3200 from operating system
M NiIServToNo: servicename sapdp00 = port 0C.80/3200
M NiCreateHandle: state nihandle-socket 1-1024 NI_INITIAL
M NiIDgSend: init datagram send_handle 1-1024
M CPU byte order: little endian, reverse network, low val .. high val
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M LOCK WP ca_blk 217
M ThResFree: free resources of U23 M0 I2 (normal mode, complete free) at level 3, db_action=TH_DB_NO_ACTION
M ThResFree: reset spa state for user T22/U23/M0
M ThCallHooks: call hook >SpoolHandleHook< for event SOS_HOOK_BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T22/U23/M0 has no cpic conns
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1099]
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThInvalidateRfcCliId: invalidate RfcCliId at 5DA68C48
M ThRmFree: cleanup resources for T22 M0
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037058/00000000/0
M RmCleanUpResources2: no resources registered
M ThRmFree: reset eg state of T22 M0
M ThRmFree cleanup resources for T22
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037BB8/5DA68D20/1
M RmCleanUpResources2: call resource handler 0047A981 for key/entry 3/0
M ThFreeRollMemory: release eg adr 5DA68C48 for T22
M RmInitResourceTblEntry: free resource description at 5DA693A8 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA693A8 for T22
M RmIFreeTable: free resource table at 5DA68D20 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA68D20 for T22
M ThRmFree: reset eg state of T22
M ThEmFree: call EmContextDelete (em_hdl=1)
M ThResFree: save spa pointer 7FDCE7E0 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/user/type = 22/SAPSYS /0x41, mode_deleted=1)
M TASK_SWITCH
M DISP
M ThRqOutCheck: o.k.
M ThISend: allowed rq_type of T22/M0 = 0
M abap strategy ROLL / O.K.
M ThNewWpStat: new MODE_REC = 40
M ThNewWpStat: new state of T22/M0 = 0xc1
M ThISend: new wp stat: 0x2
M ThMkReq: send output to canceled mode
M ThISend: complete stat record
M make DISP owner of wp_ca_blk 217
M put request into queue (reqtype 0, prio LOW, rq_id 159)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 217 wp_id 22
M -OUT- action SEND_TO_DP uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 159
M -OUT- req_info CANCELMODE
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M REL APPC ca_blk 72
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQPfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M ThSysUsrCheck(1,1): check system user T22/U23/M0
M ThSysUsrCheck: clear T22
M DpITmSlotClear: clear slot 22
M DpListRemove: elem 22 not in tmadm_free_list
M DpListInsert: elem 22 already in tmadm_inuse_list
M rdisp/wp_auto_restart = 0
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M TskhLoop: switch back to normal tracel level 1
B
B Mon Nov 19 20:15:39 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000094) [dpnttool.c 390]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000094 (Divide by zero)
App : disp+work.EXE (pid=432)
When : 11/19/2007 20:15:39.822
Threads : 2
Computer Name : APPSERVER
User Name : SAPServiceDEV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 10c8
eax=0000a000 ebx=00000000 ecx=00000000 edx=00000000 esi=03f48b44 edi=00000000
eip=10032cab esp=031688b0 ebp=031688dc iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010206
function : <nosymbols>
10032c92 807d1400 cmp byte ptr [ebp+0x14],0x0 ss:062cfc7a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp [esi+0x8],ecx ds:070afee2=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062cfc7a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr [EndFastload+0x19644f (101d5ad9)],0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr [EndFastload+0x196322 (101d59ac)],0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b76f0 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f80 018b8ca8 018b76f0 00000035 dbmssslib!dsql_db_init
031689c4 008f4765 010056b8 00000035 00000001 018b8ca8 dbmssslib!DbSlVersion
031689f4 008f10a9 00000001 00000000 3f26827c 00000000 disp+work!<nosymbols>
03168a74 008f05ff 00000000 3f26827c 00000000 3f2682ec disp+work!<nosymbols>
03168a9c 008a2873 00000000 018b769c 3f2682ec 00000000 disp+work!<nosymbols>
03168b48 0089ef88 00000000 3f26827c 3f2682ec 03168d0c disp+work!<nosymbols>
03168b5c 008a1714 3f261654 00000000 00000000 00000000 disp+work!<nosymbols>
03168d0c 0089d4ec 00000000 3f26827c 3f2682ec 00000000 disp+work!<nosymbols>
03168ea0 0061f5f7 00000000 3f26827c 3f2682ec ffffffff disp+work!<nosymbols>
03168edc 00616212 00000007 03168ef8 0316f130 00000000 disp+work!<nosymbols>
03168f1c 005bf6a0 00000008 29339f2c 00000000 3f2918e0 disp+work!<nosymbols>
0316f140 00629e43 00000000 00000000 0316f170 00000001 disp+work!<nosymbols>
00e5bc44 00000000 49444553 00000000 4f525f25 0000544f disp+work!<nosymbols>
Stack Dump for Thread Id 10c4
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00380000 esi=00000000 edi=00000000
eip=7c8285ec esp=054ffc74 ebp=054ffcb8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:054ffc74=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:08667013=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
054ffcb8 00c3475c 00000688 00000000 00000000 03e7bdf0 ntdll!KiFastSystemCallRet
054fff84 77bcb530 00000000 00000000 00000000 03e7be88 disp+work!<nosymbols>
054fffb8 77e64829 03e7be88 00000000 00000000 03e7be88 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7be88 00000000 00000000 kernel32!GetModuleHandleA
M -
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 22
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 22
M mode = 0
M len = 24
M rq_id = 1131
M rq_source = 1
M rq_info = 8576
M last_tid = 22
M last_mode = 0
M int_checked_resource = 0
M ext_checked_resource = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appserver_DEV_00 on host appserver (wp 22)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 19 20:15:39 2007
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 8628
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALL_HOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M Entering ThSetStatError
M *** WARNING => sql break failed (-1)
M ThErrHandle: don't try rollback again
M ThErrHandle: call ThrCoreInfo
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C retry with SQL statement string
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 022 000 R/3 000000 ACTIVE YES YES NO 20071119 184034
B Disconnected from connection 0
B statistics db_con_commit (com_total=6, com_forced=2, com_tx=2)
B statistics db_con_rollback (roll_total=0, roll_forced=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc22 432) [dpnttool.c 310]
M return from clean-up function ...
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 20:15:54 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 4492
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 4492) [dpxxdisp.c 976]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 201554
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86BF0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T22/U23/M0/I2
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M ThCheckPrevUser: reset spa state for user T22/U23/M0
M LOCK WP ca_blk 216
M LOCK APPC ca_blk 72
M set task type ZTTABTC
M ThCleanPrevUser: clean U23 T22 M0 I2 clean state DP_DEFAULT_CLEANING from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThCheckEmState: check ATTACH for em hdl 1
M ThCheckEmState: call EmContextAttach (em_hdl=1)
M ThIAMDel: delete tid/mode 22/0 (th_errno 23, release 1)
M ThTSCancel: set T22 M0 in status MODE_CANCEL
M ThIDeleteMode (22, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M ThSUsrDel: clean batch after error (23)
C The IRow interface is supported by this OLEDB provider
M ThScheduler: server name: appserver_DEV_00
M ThISendMsg: send message (5) to server (wp) with name >appserver_DEV_00 <
M ThISndName: send to name: >appserver_DEV_00 <
M ThISend: (tm/user/type = 22/DDIC /0x2000, mode_deleted=0)
M MSG_NAME
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat: new state of T22/M0 = 0xc2
M ThISend: new wp stat: 0x0
M Adresse Offset Message by name (one way)
M -
M 0639A0C0 000000 00000000 05000000 255f4556 454e545f |........%%_EVENT_|
M 0639A0D0 000016 53434845 44554c45 52002020 20202020 |SCHEDULER. |
M -
M ThMkReq: send output to canceled mode
M make DISP owner of wp_ca_blk 216
M put request into queue (reqtype 0, prio LOW, rq_id 1165)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 216 wp_id 22
M -OUT- action SEND_MSG_ONEWAY uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat NO_CHANGE mode 0 len 268 rq_id 1165
M -OUT- forward DIA
M -OUT- req_info CANCELMODE MSG_WITH_REQ_BUF MSG_WITH_OH
M NiPHostToAddr: read hostaddr 127.0.0.1 from operating system
M NiIHostToAddr: hostname localhost = addr 127.0.0.1
M NiPServToNo: read servno 3200 from operating system
M NiIServToNo: servicename sapdp00 = port 0C.80/3200
M NiCreateHandle: state nihandle-socket 1-1024 NI_INITIAL
M NiIDgSend: init datagram send_handle 1-1024
M CPU byte order: little endian, reverse network, low val .. high val
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M LOCK WP ca_blk 217
M ThResFree: free resources of U23 M0 I2 (normal mode, complete free) at level 3, db_action=TH_DB_NO_ACTION
M ThResFree: reset spa state for user T22/U23/M0
M ThCallHooks: call hook >SpoolHandleHook< for event SOS_HOOK_BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T22/U23/M0 has no cpic conns
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1099]
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThInvalidateRfcCliId: invalidate RfcCliId at 5DA68C48
M ThRmFree: cleanup resources for T22 M0
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037058/00000000/0
M RmCleanUpResources2: no resources registered
M ThRmFree: reset eg state of T22 M0
M ThRmFree cleanup resources for T22
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037BB8/5DA68D20/1
M RmCleanUpResources2: call resource handler 0047A981 for key/entry 3/0
M ThFreeRollMemory: release eg adr 5DA68C48 for T22
M RmInitResourceTblEntry: free resource description at 5DA693A8 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA693A8 for T22
M RmIFreeTable: free resource table at 5DA68D20 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA68D20 for T22
M ThRmFree: reset eg state of T22
M ThEmFree: call EmContextDelete (em_hdl=1)
M ThResFree: save spa pointer 7FDCE7E0 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/user/type = 22/SAPSYS /0x41, mode_deleted=1)
M TASK_SWITCH
M DISP
M ThRqOutCheck: o.k.
M ThISend: allowed rq_type of T22/M0 = 0
M abap strategy ROLL / O.K.
M ThNewWpStat: new MODE_REC = 40
M ThNewWpStat: new state of T22/M0 = 0xc1
M ThISend: new wp stat: 0x2
M ThMkReq: send output to canceled mode
M ThISend: complete stat record
M make DISP owner of wp_ca_blk 217
M put request into queue (reqtype 0, prio LOW, rq_id 1166)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 217 wp_id 22
M -OUT- action SEND_TO_DP uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 1166
M -OUT- req_info CANCELMODE
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M -
Backup error after kernel patch upgrade
Hi.
I have a backup problem after the kernel patch upgrade. I have SAP R3 4.6C on HPUX11.0 with an Oracle 8.17 database.
I have upgraded kernel patch from 1655 to 2337.
Afterward, I am getting following backup error:
BR280I Time stamp 2007-11-06 09.29.01
BR279E Return code from '/usr/sap/HAD/SYS/exe/run/backint -u HAD -f backup -i /oracle/HAD/sapbackup/.bdwnpztp.lst -t file_online -c': 2
BR232E 0 of 115 files saved by backup utility
BR280I Time stamp 2007-11-06 09.29.01
BR231E Backup utility call failed
Does anyone know how to correct this?
Thank you.Hi Jun,
backint is a link file that is in SAP kernel directory which links to the backup client on the server.
eg:
lrwxrwxrwx 1 root other 32 Aug 13 2004 backint -> /usr/openv/netbackup/bin/backint
As part of kernel upgrade process, the kernel is backed up, mostly on the disk before upgrading. Check if this link exists and recreate it in the kernel directory, if no backup was done, compare it with other systems to get the details of the backint link.
Cheers,
Nisch -
After recent patch upgrade, BW delta Data loads for 2LIS_02_ITM failing
Hi All
We have patched our BW 3.5 system from 16 to 25. After updating patches, I am geetting delta load issues.
2lis_02_itm and 2lis_02_scl delta loads are taking long long time. Deltas are failing even for 3000 records . some time it is taking 14 hours . Delta loads are failing and I am getting below message. Please advise.
I am still getting below dump and i could not find any errors in
ST22. Please see below error.
Processing in Warehouse timed out; processing steps mising
Diagnosis
Processing the request in the BW system is taking a long time and the
processing step Update rules has still not been executed.
System response
<DS:DE.RSCALLER>Caller is still missing.
Procedure
Check in the process overview in the BW system whether processes are
running in the BW system under the background user.
If this is not the case, check the short dump overview in the BW system.
Thanks
PramodHello Pramod,
Is this load is to load to initial level ODS? If Yes I understand that you have issue in loading but not at activation of the ODS?
Normally this kind of issue comes during the activation of ODS.
1. If you are getting this during the data loads, then try to check loading only to PSA first and then from PSA to target? And check how much time that it's taking as this will help to track the issue whether its present in Source or in BW?
2. If the load is fine till PSA then try loading the same to ODS and then check whether this issue is present or not?
3. At the same you need to check the source side the system load and the number of processors which are available?
4. Did you perform the delta queue draining before the stack upgrade in R/3 or not? Normally as a pre-requisite this needs to be done if not then you will have issues in extracting the data!
5. Finally this can be avoided by having Initwithout data transfer and then performing the Delta loads. BUt for this need to first extract all the data from Source to BW and then take a down time in R/3 for few min and perform this activity so that the Init Timstamp will be reset properly and the Delta should work fine for you.
Do get back to us with more details.
Thanks
Murali M -
Startsap error code 12 after oracle patch updation frm10.2.0.2 to 10.2.0.4
After applying oracle patch 10.2.0.4 on SUN 10 platform, startsap gives a error code 12. I am able to start the database but the startsap does not work. This is happening for all our systems for which we upgraded the oracle patch. R3trans -d also gives the same error. Trans.log says invalid user/password but we have not changed any password of any oracle user. In fact we are able to login to sqlplus using system and our old password. Any pointers would be higly appreciated.
Regards
GokulSAPUSER table was missing and OPS$SIDADM user was also missing. Now I am able to do sqlplus /@QGR but the problem persists . R3trans -d out is
4 ETW000
196 0.703592
4 ETW000 [dev trc ,00000] Assigning server context 0x10190b258 to service
context 0x101908f68
4 ETW000
105312 0.808904
4 ETW000 [dev trc ,00000] Assigning username to user session 0x101969140
158 0.809062
4 ETW000 [dev trc ,00000] Assigning password to user session 0x101969140
143 0.809205
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x101908f
68,srvhp=0x10190b258,usrhp=0x101969140)
4 ETW000
627 0.809832
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed w
ith rc=1034
4 ETW000
14742 0.824574
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=0x10190b25
8)
4 ETW000
170 0.824744
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1019
08f68,srvhp=0x10190b258)
4 ETW000 [dev trc ,00000] Assigning username to user session 0x101969140
158 0.809062
4 ETW000 [dev trc ,00000] Assigning password to user session 0x101969140
143 0.809205
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x101908f
68,srvhp=0x10190b258,usrhp=0x101969140)
4 ETW000
627 0.809832
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed w
ith rc=1034
4 ETW000
14742 0.824574
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=0x10190b25
8)
4 ETW000
170 0.824744
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1019
08f68,srvhp=0x10190b258)
4 ETW000
179 0.824923
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x10190b258
573 0.825496
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034
4 ETW000
191 0.825687
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1034
112 0.825799
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1034 performing CON [dbl
ink#5 @ 431]
4 ETW000
565 0.826364
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01034: ORACLE not available
131 0.826495
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 SVR4 Error: 2: No such file or directory [dblink
#5 @ 431]
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'QGR'" -
Adobe form not working after MSS Patch Upgrade
Hi,
We have implemented ESS/MSS and in one of the MSS scenario to create a new personnel chnage request we have an Adobe interactive form (WD) which actually validates the users Social Security number by calling an RFC in the ECC 6.0 and updates the form's filed on the front end. There was an issue of "Expired SSO Ticket" and to resolve this SAP recommended to apply SAP_JTECHS (SAPJTECHS13P_14-10003467) and SAP_JTECHF (SAPJTECHF13P_15-10003468) patches to fix the problem. But after applying these patches Adobe form for PCR has stopped working and it just gets hanged, form appears on the front end and when user enters the values and hit enter to validate, it doesnt communicate with the Backend ECC system only the SAP status picture keeps rotating, i turned the trace ON and checked it, its not at all communicating with the ECC system. Where as in other systems where we have not appplied the pacthes, those are working fine. One of the error i noticed in the server log is as below:
jco.client.mysapsso2=AjExMDAgAA5wb3J0YWw6QkNPTFNUT4gAE2Jhc2ljYXV0aGVudGljYXRpb24BAAdCQ09MU1RPAgADMDAwAwADU1BEBAAMMjAwODExMDMxNjU3BQAEAAAAEAoAB0JDT0xTVE//AQUwggEBBgkqhkiG9w0BBwKggfMwgfACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB0DCBzQIBATAiMB0xDDAKBgNVBAMTA1NQRDENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDgxMTAzMTY1NzQwWjAjBgkqhkiG9w0BCQQxFgQUfD7V7TS!58cgzIFyucxCSL4ltuswCQYHKoZIzjgEAwQvMC0CFA4Q0!Rr2xYFPwFwXz8WeFF1UALlAhUAmHiTdHw!3s4Q!Jc9gDyY4QSvxa4=, user=, mshost=sapdv2.company.com, r3name=DV2, jco.client.type=B, jco.client.trace=0, group=SRS, codepage=1100}
Client not connected#
#1.5 #76C1EDD07B440026000000000007501600045ACC2EF6809D#1225732914577#/Applications/BusinessLogic#sap.com/home~zb2bzsrs#com.sap.isa.core.eai.sp.jco.JCoConnectionStateful#BCOLSTO#1480##hadspd1.bnet_SPD_306896250#BCOLSTO#daca9e30a9cb11dd99c976c1edd07b44#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/Applications/BusinessLogic#Java###Error occcurred in EAI layer "".#2#com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface.#parameters: [client]='null' [user]='null' [language]='null' [ashost]='null' [systemnumber]='null' [mshost]='null' [gwhost]='null' [gwserv]='null' [group]='null' [systemid]='null'
Properties: {passwd=?, lang=en, client=150,
Can someone please suggest what could be the possible reason for such a problem with Adobe form and whats the way out to resolve this. Appreciate a quick help in this regard.
Thanks in advance,
Sarabjeet.Hi,
We had the same issue after the Patch update to SP17 in both Backend as well in Portal, to resolve my colleagues had a look at the standard forms which were working and found that because of the patch update the script used in the custom forms was changed and not the standard and
on event trigger which was processed in the container they replace the script to the standard one. and it started working.
But this is not the solution we are looking at solution on having the same version of script as in the standard even after the patch update.
So to your point to resolve compare the scripts in both standard and customized forms and do the same.
And also have a look at the SAP Note: 1109392
.... this is a temporary solution.....
Hope this helps.
Cheers-
Pramod -
Repository connect issue after MDM Patch Upgrade
MDM Expert
We recently upgraded our MDM patch from SP06 5.5.63.73 to SP06 5.5.65.91
after patch upgrade we are not able to connect to repository.SAP is saying that we have wong NLS Character set.It should be 'UTF8' or 'AL32UTF8'
We checked and found that we do not have character set as per SAP Recommendation but everything was working fine before upgrading the patch.As per SAP in new Patch MDM is lokking for Unicode Character set
SAP is asking to create new DB Instance for MDM.
If we create new instance for MDM then how we are going to use our existing repository.Our environment is clustered environment and name of MDM DB instance is also mentioned in cluster.We have to use same Instance name.We are also using oracle failsafe
Creating new instance seems to be risky for Production environment.Currently we are applying the Patch in Sandbox Environment
has anyone of you faced this problem while upgrading MDM patch, if yes then how you resolve the issue
Please help
Thanks
DeelipSolution provided by sAP
-
Hi all,
Our SAP version is 4.7E and Oracle 9.2.0.7.I have recieved one message that Oracle only give support for 9.2.0.7 up to july 31 2007.They have suggested apply the latest patches.But oracle is giving free support for version 9.2.0.7 up to july 31 2008.
1.If we will not apply oracle patches how will it effect the system?
2. We will need to apply those latest patch only before july 31 2007?
Please help on this.
Regards,
nani Prakash.> Hi all,
> Our SAP version is 4.7E and Oracle
> 9.2.0.7.I have recieved one message that Oracle only
> give support for 9.2.0.7 up to july 31 2007.They
> have suggested apply the latest patches.But oracle
> is giving free support for version 9.2.0.7 up to
> july 31 2008.
The extended support is for version 9.2 (not only 9.2.0.7) for free until 31st of july 2008. The reason why you should go to 9.2.0.8 is because of the fact, that new patches are only developed/released for 9.2.0.8 and no more for 9.2.0.7. So in case you need an urgent correction for a problem in the future you would need to upgrade to 9.2.0.8 first before you can apply that patch.
Check Note 1021844 - Oracle 9.2 Extended Support free until July 31, 2008
Markus -
I've noticed that sshd has been producing core dumps. The core dumps aren't affecting anything and appear to be produced after the ssh session ends.
/var/adm/messages shows:
Jun 30 09:59:59 www1 sshd[15453]: [ID 800047 auth.info] Accepted publickey for webstats from 123.123.123.123 port 4935 ssh2
Jun 30 10:00:01 www1 genunix: [ID 603404 kern.notice] NOTICE: core_log: sshd[15453] core dumped: /var/core/core_www1_sshd_0_0_1151625600_15453
A core dump isn't produced every time but only appears to happen after ssh connections from windows systems running cygwin.
Running adb on a core dump shows:
core file = core_www1_sshd_0_0_1151390790_3514 -- program ``/usr/lib/ssh/sshd
'' on platform i86pc
SIGSYS: Bad System Call
Like I said, it doesn't appear to be causing any problems. Any ideas on how to stop it?Forgot to mention. We are calling OCISessionEnd before rolling through OCIServerDetach.
/* STATIC */
static void logout()
printf ("\n\nFreeing statement handles..\n");
if(stmthp) OCIHandleFree ((dvoid *) stmthp, (ub4) OCI_HTYPE_STMT);
printf ("Logging off...\n");
if(authp) OCISessionEnd (svchp, errhp, authp, (ub4) 0); -
Memoy fault, core dump after import
Hi,
db is 9.2.0.7, os is hp-ux itanium 11.23
i have done schema level import, after import, i got the memory fault core dump at end of the import log file as last entry. I have seen core dump file created.
I did not see any errors in alert log file.
But Import has been done successfuly and can check that all objects are imported successfully.
why this memory cored dump error logged in import log file.Please post full error message what You got.
-
Oracle field length error after Oracle patch update
Dear All,
We have an ABAP program wherein we are inserting records in an external (non-SAP) Oracle DB
by means of native SQL. On 22/08/2010, we had updated an Oracle patch in the production server.
After the patch was updated, the program has started throwing error:
An SQL error has occurred: ORA-12899: value too
large for column
"CELLAPPS"."AWLTBLMESSAGES"."MESSAGETEXT" (actual:
438, maximum: 350)#ORA-06512: at line 1
The message text variable has only 219 characters. After some observations, i found that all the data is
converted into exactly double the length after this oracle patch update.
Please help.
Thanks.Hello,
Which is your NLS for your SAP and the external databases?
SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER = 'NLS_CHARACTERSET';
What is your DBCO Conn. Info field?
What is the result if you set the remote connection in DBCO as per SAP note [808505|http://service.sap.com/sap/support/notes/808505]?
Regards,
Eduardo Rezende -
Core Dump in Oracle Reports10G
Some times when ever i run reports i used to get core dump. I want to know why does it occurs and solution to prevent it. Can any one help me. I am using Solaris OS.
"Don't Panic" is soooooooo August. Get with the times
Core Dump is the code name of the next release, due soon. -
Oracle patch upgrade after downgrade
We patched Oracle from 11.2.0.2 to 11.2.0.3 successfully. Third party app had issue and blamed it on the patch, so I downgraded back to 11.2.0.2 successfully.
Turns out the problem was not with Oracle, and I want to get back to 11.2.0.3.
For the downgrade, I did (just listing the major steps)
startup downgrade
drop sysman
@catdwgrd
Point ORACLE_HOME / oratab / oraInst to the old, renamed ORACLE_HOME (11.2.0.2)
attachHome
apply patch 11811073 (new catrelod.sql)
Startup upgrade
@catrelod
bounce DB and @utlrep, and everything looks peachy on 11.2.0.2.
My question now is - what is the most painless way to get back to 11.2.0.3 ?
Can I just re-point to the new ORACLE_HOME and run a catupgrd / catrelod out of the 11.2.0.3 dirs ?
Edited by: allgoodnamesaretaken on 31-Jul-2012 13:57Hi;
Just wonder, Dont you get any information your 3th party tool certified or not certified wiht that version? Secondly You already mention you made upgrade wihtout any issue so why you are looking different path:) Journey? :)
Anyway check below note :
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios
Maybe you are looking for
-
Deleted items still using up space?
iPhone 4, have deleted all videos and nearly all photos off my phone (My Photos and Photo Stream). When plugged into my computer, iTunes says there is 4GB of photo space used up. My phone says there are 4 videos still on my phone. How do I free up
-
I amtrying to consolidate my i-tunes library so I canmove it to new computer. It said it could not complete because of error 69. Later when I was synching my nano or trying to I got the same error message. susanfrom lombard
-
ITunes is shutting down my whole computer. Help!
I just recently upgraded to the newest iTunes version. 8.1 I think, and everytime I get on iTunes and after I start playing a song or something, my computer just shuts down...instantly. I run on Windows Vista and it is very annoying to keep having to
-
Why does my FLASH DRIVE inserted to mac then inserted to WINDOWS it turned to shortcut after that i can't open my file to my mac.
-
the terminal begins to launch. but all i get is a useless red dot in a tiny grey square box which i cannot enlarge. also some of my fonts disappeared (helvectia & geneva maybe more?) I cannot lauch my address book either???? Can someone please help m