System crash after sleep mode
Hello,
Since I've updated to Tiger, the system always crashes after getting back from sleep mode, upon trying to use Firefox or Thunderbird. I can't even restart using alt-apple-esc and will have to use the power button.
Has anyone experienced the same problem? Does anyone know a solution to that problem?
Thanks a lot in advance!!
Additional info:
I'm using airport to connect to the internet (DSL connection with a Zyxel Prestige 600 Router).
Firefox 1.5.0.2; Thunderbird 1.5; Norton Internet Security 3.0
imac g5 Mac OS X (10.4.6)
Hi Pat,
just checked. Firefox is running java 0.9.5
Then you're OK with that...
However upon checking the java version on my mac, I got the following answer: "Exception in thread "main" java.lang.NoClassDefFoundError: version".
What does that mean? How to fix it?
However, there's something wrong with your Java installation:
A NoClassDefFoundError is thrown when a classloader or the Java Virtual Machine tries to load a class and no definition of the class can be found. This could happen when using the new expression or during a normal method call. The reason this would occur at runtime is because the missing class definition existed when the currently executing class was compiled, but now that definition cannot be found.
If that sounds to geeky, then just check (via Software Update) if you're running the latest version of Java or if there's an update waiting to be installed in your system
Did you notice any other problematic Java-related behaviour?
Safari runs OK?
Did you take all the appropriate steps before upgrading to 10.4.6? What version have you been runnig before 10.4.6?
Macs running 9.x, Macs running 10.4.x and SGI workstations running Irix 6.5.x
Similar Messages
-
Desktop computer crashes after sleep mode since upgrade to Snow Leopard
Since I upgraded my power Mac to Snow Leopard in December, I've had nothing but problems, all of which appear to stem from when it comes out of sleep mode. This computer and all applications were rock solid in Leopard! I also have a mac book running identical programs and that IS rock solid on Snow Leopard. I have a 2 x 2.8 GHz Quad Core Intel Xeon processor with 10 GB ram.
I did a complete re-install of SL and all programs as per the Apple instructions.
Basically, the computer crashes after sleep mode. I've tried all the fixes I've read on the net. Here is the report thread from the last crash. Does it mean anything or throw any light on the problem to anyone?
Thanks,
David Wright
Interval Since Last Panic Report: 14 sec
Panics Since Last Report: 1
Anonymous UUID: A8309844-77B4-45E9-AB36-6AF2850B84A0
Tue Jan 19 13:01:16 2010
panic(cpu 4 caller 0x2a7ac2): Kernel trap at 0x8722a3a1, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x87e7a81c, EBX: 0x87e7a804, ECX: 0x10a2dd00, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x87e7a7a8, ESI: 0x000001f8, EDI: 0xffc21000
EFL: 0x00010202, EIP: 0x8722a3a1, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 4), Frame : Return Address (4 potential args on stack)
0x87e7a598 : 0x21b2bd (0x5cf868 0x87e7a5cc 0x223719 0x0)
0x87e7a5e8 : 0x2a7ac2 (0x591c30 0x8722a3a1 0xe 0x591dfa)
0x87e7a6c8 : 0x29d968 (0x87e7a6e0 0x246 0x87e7a7a8 0x8722a3a1)
0x87e7a6d8 : 0x8722a3a1 (0xe 0x48 0x10 0x290010)
0x87e7a7a8 : 0x8722f604 (0x10a2dd00 0x112e48c4 0x1 0x87e7a7e4)
0x87e7a838 : 0x8722ad60 (0x20d83400 0x10a2dd00 0x87e7a86f 0x0)
0x87e7a888 : 0x87306953 (0x10a2dd00 0x2 0x0 0xffffffff)
0x87e7a8e8 : 0x87789a40 (0x129f0d00 0xff91b80 0x1f8 0x2)
0x87e7a978 : 0x87788845 (0x6f40c004 0x12 0x7 0x2)
0x87e7aa48 : 0x87d92525 (0x159a3e00 0x30006 0x12493004 0x159a3e00)
0x87e7aa68 : 0x87d92413 (0x159a3e00 0x87d9e8a0 0x1 0x0)
0x87e7aa98 : 0x87d97df2 (0x159a3e00 0x12493000 0x5ac000 0x1)
0x87e7aad8 : 0x549661 (0x12493000 0x0 0x0 0x0)
0x87e7ab28 : 0x87d958d8 (0x10675f40 0x87d95df0 0x0 0x0)
0x87e7ab58 : 0x5638fc (0x12493000 0x87e7ab80 0x87e7ab84 0x87e7ab88)
0x87e7abd8 : 0x563c74 (0x11d8534c 0x12493000 0x20e35c90 0x0)
0x87e7ac28 : 0x564554 (0x12493000 0x3 0x87e7ac70 0x0)
0x87e7ad48 : 0x284797 (0x12493000 0x3 0x20e35c90 0x0)
0x87e7bdf8 : 0x21d65f (0x20e35c68 0x20c165a0 0x1fd2a0 0x5b17)
0x87e7be38 : 0x2107f7 (0x20e35c00 0x0 0x11434030 0x20e188f0)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.RME.driver.FirefaceAudioDriver(2.64)@0x87785000->0x8778dfff
dependency: com.apple.iokit.IOAudioFamily(1.7.2fc1)@0x87d8d000
dependency: com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000
com.apple.iokit.IOAudioFamily(1.7.2fc1)@0x87d8d000->0x87da4fff
dependency: com.apple.kext.OSvKernDSPLib(1.3)@0x87cf7000
com.apple.driver.AppleFWOHCI(4.4.0)@0x87221000->0x87246fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x7dfa3000
dependency: com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000
com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000->0x8732ffff
BSD process name corresponding to current thread: QTKitServer
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 82873577512931
unloaded kexts:
com.apple.driver.AudioAUUC 1.0 (addr 0x878f1000, size 0x16384) - last unloaded 82669937654216
loaded kexts:
com.RME.driver.FirefaceAudioDriver 2.64 - last loaded 82552224025300
com.paceap.kext.pacesupport.snowleopard 5.7.2
tc.tctechnologies.driver.AlesisFirewire 6300
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHWSensor 1.9.2d0
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 201
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.iokit.CHUDProf 214
com.apple.kext.ATIFramebuffer 6.0.6
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.ATIRadeonX2000 6.0.6
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AppleIntel8254XEthernet 2.1.1b7
com.apple.driver.AirPortBrcm43xx 421.91.26
com.apple.driver.AppleUSBDisplays 2.2
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.Apple_iSight 4.0.1
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 207
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.iokit.IONDRVSupport 2.0
com.apple.kext.ATI2600Controller 6.0.6
com.apple.kext.ATISupport 6.0.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.driver.AppleUSBHIDMouse 1.4.0d7
com.apple.driver.AppleHIDMouse 1.4.0d7
com.apple.driver.AppleUSBHIDKeyboard 1.2.0a3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleHIDKeyboard 1.2.0a3
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.26)
Bluetooth: Version 2.2.4f3, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: ATI Radeon HD 2600, Display, Slot-1
Serial ATA Device: WDC WD10EADS-00P8B0, 931.51 GB
Serial ATA Device: ST3500630AS, 465.76 GB
Serial ATA Device: ST3500630AS, 465.76 GB
Serial ATA Device: WDC WD10EADS-00P8B0, 931.51 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Hub, 0x05ac (Apple Inc.), 0x912f, 0xfd500000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x9221, 0xfd520000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd300000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd340000
USB Device: ProtectExecuter, 0x0819, 0x0101, 0xfd344000
USB Device: iLok, 0x088e, 0x5036, 0xfd343000
USB Device: MS-20 Controller, 0x0944, 0x0101, 0xfd341000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd310000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd313000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd312000
USB Device: USB2.0 Printer (Hi-speed), 0x04b8 (Seiko Epson Corp.), 0x0007, 0xfd200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000
FireWire Device: Vendor 0xA35 Device 0x101800, 0xA35, Up to 400 Mb/sec
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: iSight, Apple Computer, Inc., Up to 200 Mb/sec
FireWire Device: unknown_device, Unknowndavidadmusic wrote:
The problem has been identified as the RME fireface400 audio driver. I've spent some considerable time experimenting to identify the culprit. It's clear that this is what is causing all my problems since Snow Leopard. Whether it's exclusively the drivers fault or partly also due to a conflict with apple SL, I don't know, but I have crash reports if apple want to see them.
From your first post, it appears you are using Fireface audio driver version 2.64. RME released a new Snow Leopard compatible driver (version 2.65) last December. It is available at RME: Downloads. (There is also a firmware updater for the Fireface 400 there, which you might want to check out.)
It isn't at all unusual for a new OS version to require new drivers for third party hardware. References to this can be found all over the web, in "read me" files & other documentation, etc. -- it doesn't just apply to OS X but to Windows & other OS's as well. (One of the biggest problems with Vista was poor third party driver support.) In fact, the X-Lab "Resolving Kernel Panics" article specifically cautions users to make sure all such drivers are current. See section 6.1 of that article for more details.
I don't know if you missed all this somehow, but if you haven't already downloaded & installed the new RME driver (& possibly the firmware update as well), then do so now. While you are at it, check for other similar updates for any other third party hardware devices you use, using the info in section 6.1 of the X-Lab article as a guide.
Hopefully, this will resolve your issue, which (as already mentioned) is kernel panics, not crashes. If you still have problems, post more about them, being mindful of the difference between application crashes & kernel panics. Because they are fundamentally different, they have different cures, so we will need to know which type they are to offer effective help. -
Flex 2 15 crashing after Sleep Mode
I have a Flex 2 15. Recently I will put it in sleep mode and it will turn off at some point while in sleep. The computer has to be powered on fresh boot to turn back on. I checked the event log and it says 0x0000000009f was an issue and windows boots saying a serious issue caused a crash. Ive tried updating the video card drivers and any drivers I could find, still no resolution.
hi Apad121,
Welcome to the Forums.
If the DVD drive is missing or not detected in the BIOS then this is a sign that the drive is either not physically connected into the machine or is malfunctioning. It could have been just a coincidence but it's likely that there's a hardware problem going on (either the drive itself or its connection to the motherboard).
If you have experience in laptop disassembly, you can reseat the DVD drive by following page 36 of the HMM or see the guide below: Otherwise, I recommend you contact lenovo and report your findings as you may need to get the unit serviced.
Flex 2 15 Video Disassembly (see FRU Videos)
Support phone list
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
System freeze after sleep mode
Some times after I click my mouse after system went to energy savings mode, the carosell will start spinning and nothing happens. The system gets completely frozen and my MBP has been this way since I got it (Late 2011). I get through this by pressing power button to hard shut off the computer. When it's booting up it always takes a little longer, not sure if that's interesting or not. Also, some times when system is booting it stops and gets this folder with a blinking question mark in it. This, also has been an out-of-box flaw. I tried reinstalling the entire system but that didn't do much.
I probably shoud've went to apple store right when this happened the first time but at that time there was none in Sweden, that left me with the option of turning the computer in at a apple reseller for trouble shooting. They didn't offer a computer in the mean while so that didn't appeal to me at the time.
Any thoughts on this would be greatly appriciated!I'm not a super expert but I recommend to try the followings:
1. Open Disk Utility and click Repair Disk Permissions for your Macintosh HD to check if there were any errors.
2. Reinstall OS X by pressing Command + R on startup
3. Erase your hardrive totally and install OS X again. -
Macbook pro runs really slow after sleep mode
My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
Kind regardsHi Japib
Thanks for your reply. Here is my report:
Problem description:
macbook pro is really slow after sleep mode
EtreCheck version: 2.1.8 (121)
Report generated 4 februari 2015 20:56:34 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 172
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 1:36:41
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Hotspot Shield
[not loaded] com.anchorfree.tun (1.0.1) [Click for support]
/Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
[loaded] com.kaspersky.kext.kimul.44 (44) [Click for support]
[loaded] com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
/Library/Extensions
[loaded] com.kaspersky.kext.klif (3.0.4a41) [Click for support]
[loaded] com.kaspersky.nke (1.6.4a15) [Click for support]
/System/Library/Extensions
[loaded] com.hzsystems.terminus.driver (4) [Click for support]
[not loaded] com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
[not loaded] com.sony.driver.prs2 (1.0.3d1) [Click for support]
[not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Launch Agents: ℹ️
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
[failed] com.epson.esua.launcher.plist [Click for support] [Click for details]
[running] com.epson.eventmanager.agent.plist [Click for support]
[running] com.kaspersky.kav.gui.plist [Click for support]
[not loaded] com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
[not loaded] com.trusteer.rapport.rapportd.plist [Click for support]
[running] com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.anchorfree.ajaxserver.plist [Click for support]
[running] com.kaspersky.kav.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
[loaded] com.tunnelbear.mac.tbeard.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Documenten Map (/Users/[redacted]/Documents)
uTorrent UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 60 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
Default Browser: Version: 600 - SDK 10.10
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
AdBlock
DuckDuckGo
Save to Pocket
Awesome Screenshot
URL Advisor
Virtual Keyboard
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Squeezebox [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
Destinations:
My Passport [Local]
Total size: 999.83 GB
Total number of backups: 17
Oldest backup: 2013-11-06 17:55:38 +0000
Last backup: 2014-10-14 11:30:39 +0000
Size of backup disk: Adequate
Backup size 999.83 GB > (Disk used 206.70 GB X 3)
Top Processes by CPU: ℹ️
15% mds
5% WindowServer
0% ocspd
0% fontd
0% kav
Top Processes by Memory: ℹ️
223 MB kav
198 MB Safari
155 MB Mail
137 MB mds_stores
77 MB WindowServer
Virtual Memory Information: ℹ️
3.45 GB Free RAM
3.05 GB Active RAM
1.11 GB Inactive RAM
974 MB Wired RAM
1.64 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 4, 2015, 07:21:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
Feb 4, 2015, 07:18:08 PM Self test - passed
Hope this will shed some light on the problem. -
Mac Pro 2008 always crash after sleep and after first start
Hello, new in the forum,
2 years ago, I replaced the main disk of a Mac Pro 2008 for a SSD Samsung 470 256 Go.
Until then, it always crashed 1 or 5 minutes after sleep mode (which I didn't used much), and not always 10 to 15 minutes after the first start of the day.
No matter if I was working on it or not… Suitcase installed or not (no font problem here). Rest of the day was fine (if no sleep !).
The difference of speed was so big and "good" that I dealed with it. I though that the Mac Pro was a little old for the SSD technology, and that Apple would fix it, with chance…
2 weeks ago, I installed Maverick :
I got crashs during the work flow too. I needed to re-start 3 times at least… Re-start without extension was ok (or not), re-start, crash, re-start without extension, restart ok. I used Onyx, did PRAM too. And sometimes, I needed to re-install Maverick or even to do a clean-install !
So I suspected the Samsung 470 for all (sleep and work crashs) and replaced it for a Samsung 840 Pro 512 Go.
And the Mac Pro returned to Mountain Lion.
Not really better : no crash one day (yeeeees!) and crash after the first start the next day (nooooo!). Every time I tested sleep mode, it crashed.
My system :
Mac Pro 3.1 - 2,8 GHz - Quad
Mountain Lion, 10 Go ram DDR2, ATI Radeon HD 2600 XT, 30' cinema display.
Adobe CS5 alone (minimal install) with Onyx to repair after each crash.
Could it be the video card, the mother board, the age of the boy ?
Thanks a lot !
Christophe SEdit !
I said that Finder and apps were blocked after 10 seconds (without extension).
But it was to clic on Launchpad that blocked all, and 5 minutes later it works again.
I did clic again on Launchpad, it blocked and 2 minutes later it appeared full screen but with rainbow circle, and quit.
- Restarted with extensions. Kernel panic!
- Restarted the mac and the grey screen with Apple blocked, without any mouse this time. 15 minutes later, still blocked.
- Forced restart without extension. Here are the reports of Kernel Panic and EtreCheck:
Kernel Panic Report:
Interval Since Last Panic Report: 122463 sec
Panics Since Last Report: 1
Anonymous UUID: 52E60929-F5AE-D9CD-04B0-1872526C0821
Mon Oct 13 10:58:17 2014
panic(cpu 3 caller 0xffffff8007cb8945): Kernel trap at 0xffffff8007ef69e0, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x000000000000008a, CR3: 0x000000002f749000, CR4: 0x0000000000000660
RAX: 0xffffff80209bb7e8, RBX: 0xffffff801fc6d808, RCX: 0x0000000009000000, RDX: 0xffffff801fc6dde0
RSP: 0xffffff8131b7bbc0, RBP: 0xffffff8131b7bc00, RSI: 0x00000000000c43ff, RDI: 0xffffff801fc6dde0
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80220fbfa4, R11: 0x0000000000000020
R12: 0xffffff801fc6dde0, R13: 0x00000000000c43ff, R14: 0x00000000000c43ff, R15: 0x0000000000000002
RFL: 0x0000000000010202, RIP: 0xffffff8007ef69e0, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000008a, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff8131b7b860 : 0xffffff8007c1d636
0xffffff8131b7b8d0 : 0xffffff8007cb8945
0xffffff8131b7baa0 : 0xffffff8007ccebfd
0xffffff8131b7bac0 : 0xffffff8007ef69e0
0xffffff8131b7bc00 : 0xffffff8007eee0d6
0xffffff8131b7be00 : 0xffffff8007d1a5d6
0xffffff8131b7be60 : 0xffffff8007d092aa
0xffffff8131b7bf50 : 0xffffff8007fe97ba
0xffffff8131b7bfb0 : 0xffffff8007ccf453
BSD process name corresponding to current thread: mdworker
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide: 0x0000000007a00000
Kernel text base: 0xffffff8007c00000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 121192507210
last loaded kext at 8889944220: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f899fe000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.4.7fc4
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.iokit.IOBluetoothSerialManager 4.1.7f4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 8.1.6
com.apple.driver.AppleUSBDisplays 357
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.ATIRadeonX2000 8.1.6
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.CSRHIDTransitionDriver 4.1.7f4
com.apple.driver.PioneerSuperDrive 3.3.1
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleUSBHub 635.4.0
com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBUHCI 621.4.0
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.kext.AMD2600Controller 8.1.6
com.apple.kext.AMDSupport 8.1.6
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.driver.AppleUSBHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.AppleUSBHIDKeyboard 170.2.4
com.apple.driver.AppleHIDKeyboard 170.2.4
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Bluetooth: Version 4.1.7f4 12974, 3 service, 12 devices, 0 incoming serial ports
PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: ST31000524AS, 1 TB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: hub_device, apple_vendor_id, 0x9120, 0xfd500000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd520000 / 4
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd521000 / 6
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd522000 / 5
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x9220, 0xfd530000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speed
Report EtreCheck :
Description du problème :
Here is the report of EtreCheck after the Kerner Panic sent before.
Christophe.s
EtreCheck version : 2.0.2 (86)
Rapport créé 13 octobre 2014 11:23:31 UTC+02:00
Informations matérielles : ℹ️
Mac Pro (début 2008)
Mac Pro - modèle : MacPro3,1
2 2.8 GHz Quad-Core Intel Xeon CPU : 8-core
10 GB RAM Pas extensible
DIMM Riser B/DIMM 1
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 2
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 1
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 2
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
DIMM Riser A/DIMM 3
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 4
2 GB DDR2 FB-DIMM 800 MHz ok
Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
Informations vidéos : ℹ️
ATI Radeon HD 2600 - VRAM : 256 MB
Cinema HD Display 2560 x 1600
Logiciel du système : ℹ️
OS X 10.8.5 (12F45) - Uptime: un jour 0:11:6
Informations des disques : ℹ️
Samsung SSD 840 PRO Series disk0 : (512,11 GB)
Statut S.M.A.R.T. : Vérifié
disk0s1 (disk0s1) <non monté> : 210 Mo
MacPro SSD (disk0s2) / [Startup] : 511.25 Go (472.61 Go libre)
Recovery HD (disk0s3) <non monté> [Restauration] : 650 Mo
ST31000524AS disk1 : (1 TB)
Statut S.M.A.R.T. : Vérifié
disk1s1 (disk1s1) <non monté> : 210 Mo
MacPro 1To (disk1s2) /Volumes/MacPro 1To : 999.35 Go (633.08 Go libre)
Recovery HD (disk1s3) <non monté> [Restauration] : 650 Mo
Informations USB : ℹ️
Verbatim Portable USB Drive 320,07 GB
Statut S.M.A.R.T. : Vérifié
disk3s1 (disk3s1) <non monté> : 210 Mo
320 Go Christophe Syren (disk3s2) /Volumes/320 Go Christophe Syren : 319.73 Go (313.64 Go libre)
USB 2.0 USB Flash Drive 8,17 GB
Statut S.M.A.R.T. : Vérifié
SANS TITRE (disk2s1) <non monté> : 8.17 Go
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Bluetooth USB Host Controller
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Représentants de lancement : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.CS5ServiceManager.plist Aide
[désengagé] com.extensis.FMCore.plist Aide
Daemons de lancements : ℹ️
[invalid?] com.adobe.SwitchBoard.plist Aide
Représentants de lancement pour l’utilisateur : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.ARM.[...].plist Aide
Éléments Ouverture : ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Plug-ins internet : ℹ️
OfficeLiveBrowserPlugin : Version : 12.3.6 Aide
AdobePDFViewer : Version : 9.5.5 Aide
QuickTime Plugin : Version : 7.7.1
JavaAppletPlugin : Version : 14.9.0 - SDK 10.7 Vérifier la version
Panneaux de préférences de 3ème partie : ℹ️
Growl Aide
Time Machine : ℹ️
Skip System Files: NO
Sauvegarde automatique : OUI
Disques sauvegardés :
MacPro SSD : Taille de disque : 511.25 Go Disque utilisé : 38.64 Go
Destinations :
Data [Network]
Taille totale : 2 To
Nombre de sauvegardes total : 9
Sauvegardes la plus agée : 2014-10-08 01:39:21 +0000
Dernière sauvegarde : 2014-10-10 11:31:35 +0000
Taille de la disque de sauvegarde : Excellent
Taille de sauvegarde 2 To > (Taille de disque 511.25 Go X 3)
L’utilisation du CPU par processus : ℹ️
1% WindowServer
0% ps
0% fontd
0% System Events
0% coreservicesd
L’utilisation de la mémoire par processus : ℹ️
97 Mo Dock
97 Mo Finder
75 Mo WindowServer
64 Mo com.apple.security.pboxd
64 Mo CalendarAgent
Informations de la mémoire virtuelle : ℹ️
523 Mo RAM Disponible
1.04 Go RAM Active
307 Mo RAM Inactive
8.86 Go RAM Résidente
266 Mo Pages entrants
0 o Sorties pages -
IMac locking up in Yosemite after sleep mode engaged
iMac 27 locking up after sleep mode requiring full power shut down and rebooting in safe mode then shutting down and rebooting normally.. Permissions and this check show no errors, the only error sleep mode failure. Boot up is very slow as well as wake up when possible is slow. Yosemite seems to need a new release in order to correct the boot problems. System operates more like a Windows machine than Apple machine what's going on?
In Ten (10) Crash logs it gives me the following reason:
Process: fontd [337]
Path: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Support/fontd
Identifier: fontd
Version: 375
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: fontd [337]
User ID: 501
Date/Time: 2014-12-26 12:21:45.036 -0500
OS Version: Mac OS X 10.10.1 (14B25)
Report Version: 11
Anonymous UUID: 3D86DE4D-DF6F-C140-16F8-4F80DBCD6634
Time Awake Since Boot: 250 seconds
Crashed Thread: 2 Dispatch queue: Scanner Queue
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: EXC_I386_GPFLT -
Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.
Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770. -
Brand new home built system (all new components unless noted otherwise) running Windows 7 64-bit Home Premium on the following hardware:
MSI X58 Pro-E motherboard,
Intel Core i7-920 (2.66) CPU,
Enermax PRO82+ 525W powersupply,
Sapphire ATI HD5670 1GB GDDR5 PCI-E video,
8GB Corsair 1333MHz RAM,
WD Velociraptor 150GB 10,000 RPM boot drive,
WD 500GB Caviar Black for file storage,
Plextor DVD-RW,
CoolerMaster case.
Older Viewsonic VP2030B monitor,
Older Microsoft Desktop 6000 V2 keyboard/mouse.
With standard Windows 7 power saving features enabled, the following
intermittent problems occur:
After the system has gone into sleep mode, the video card provides no signal to the monitor. Moving the mouse or touching keys on the keyboard obviously bring the system back out of sleep mode, but no video signal is received. Unplugging the DVI-D
cable from the card results in the Windows sound indicating a change. Plugging it back in, results in a Windows sound indicating the change. This happens when you unplug one end of the cable, it doesn't matter if it is at the monitor end or the video card
end - as long as the other end is of course still plugged in. The only resolution to this "no video" state is to reboot the computer with the power or reset button.
On some occasions when turning the PC on, there is no video signal. The system boots properly (although the BIOS screen takes about 15 seconds to appear - something MSI says is OK), and can be shut down with the correct keyboard sequence. The monitor
runs through VGA, DVI-A and DVI-D, but no signal is ever received so it goes into standby mode.
When the computer boots properly, usually while it is still loading Outlook (which is set to start automatically), the screen goes completely blank for 5 or more seconds, then comes back on and the monitor menu indicates that it is running at the correct
resolution, and then the video works correctly from there on in - unless it goes to sleep.
On some occasions, when recovering from a "no video after sleep mode" incident, everything on the screen has been moved towards the upper left side of the screen. The Outlook window which is normally quite large (80%) and centred on the screen has been reduced
in size to about 50% and shoved into the top left corner. Also, the 4 gadgets that normally run vertically along the right side of the screen have been moved up and towards the middle of the screen, one or two of them often overlap others.
Things I have done/tried:
All Windows 7 updates,
All motherboard BIOS updates,
All video card drivers and software updates from ATI,
Replaced the DVI-D cable,
Uninstalled the video card and drivers, and moved the card to a different PCI-E slot,
Replaced the video card with another Sapphire ATI HD5450 card (temporarily).
Sapphire thinks it's a hardware problem with the original card, but since temporarily replacing it with another card, the problems continue, so I doubt that is the issue. (Plus I have to pay $25 to ship the apparently defective - under warranty card - back
to them.)
These problems have happened intermittently since the system was built in January 2010 and they seem to be quite random, sometimes not happening for weeks, other times happening every few days. Sometimes the system is in sleep mode for 1/2 hour and it happens,
other times it is in sleep mode for hours and it happens (or doesn't).
Any help would be appreciated.Hi again,
OK, I finally got around to trying this. I still have to check if that actually fixed it, but I managed to get into the "Factory" OSD screen.
I had my system running, disconnected my new monitor and plugged in the flaky old Viewsonic. I then:
1. Depressed and held down the #2 button, then depressed and held down the Power button,
2. Almost immediately the amber power light turned-on, the backlight turned on and the output image from the PC showed up.
3. The On Screen Display (OSD) for all the monitor setting came up (at the bottom of the screen instead of the middle where it normally is), and underneath the Main Menu window in the OSD, along the bottom of the overall OSD window, the word "Factory" appears
in the middle between the control button keys (#1 for exit, and #2 for enter). (It's not normally there.)
4. Using the down arrow key on the face of the monitor, I highlighted the "Factory" menu item, pressed the #2 key and voula! there was a whole new simple white text on bright blue background window, which among all sorts of settings included "Factory Reset"
(which is the default selection).
5. I pressed #2 again to accept and it was done.
All that is left is to do is some user testing to see if the monitor behaves as new.
Additional informtion: in the top of the "Factory" menu it reads: "LOVP AU Ver.0.36"
I took photos of everything and will post them on my Flickr account. To find them go to wwww.flickr.com, click on the search button, then on the next screen click on the People tab, enter my name and click search.
Thanks again for the advice.
Tom -
Monitor won't wake up after sleep mode
Does anyone know how to fix the monitor, so it starts up after sleep mode? When my computer comes out of sleep mode the monitor doesn't always come on. Does anyone else have this problem and do you know the cause? The computer is only a few months old and hadn't had any problems.
Thanks,
ShaneilWell my solution may not be the most cientific one but it works for me (at least until the real solution comes to the public)...
My computer has the problem that when it goes to sleep mode she never comes back... but it the screen that does not comes back... all the system is workin in behind (its like the brightness level was set on the less power possible) so i had to turn off the computer and had to do for a long time some times i had to wait that the computer cooled off a little and then try again to turn it on... I some tried things that the support page of apple said it could be... but did worked out... i dont know i think is a problem over 2 factors...
1. heating (the screen generates to many heat but, TO MANY!)
2. tiger os the OS "sleep mode" (it knows that the screen its heating a lot and tries to go to sleep to prevent over heating and damage)
So based on this i tried conecting a external monitor to the computer while she was unable to "awake" (or to show some thing in the screen)... and it worked whit no problem at all... so my conclusion was to prevent the over heating (1st factor) and the sleep mode (2nd factor)... so I deactivated the sleep mode setting up the computer to a never sleep mode... and to prevente the over heating well I use a low bright and when i need more brightness (to se the colors of what im doing or some thing like that) I use high brightness... when I away I set the brightness level to no brightness so there is no over heat and no sleep mode (cus if it is deactivated and it over heats it will go to sleep anyway...
Soooooo....
1. deactivate Sleep mode...
2. Activate a Screen saver...
3. And remember to contro your brightness your self... and turn it off when you are not using your computer...
well i hope it works for some body :P cya... -
Lion autoconnecting after sleep mode, lion autoconnecting after sleep mode
It's really frustrating that my Mac 9/10 times won't reconnect after sleep mode.
Is there something I can download to fix this please.This should be filed under "What Worked for Me". For me this turned out to be a simple fix for a tough problem. Maybe someone else can benefit from my experience so I'm dropping this into the forum to be searchable.
The short answer is to try putting your WiFi station on a low channel number. It fixed my reconnect problem permanently. I can only speculate about why this works, but it's easy to try.
Long version- Fails to autoconnect after sleep, own station not listed in wifi dropdown list.
After almost a year of flawless reconnect, my iMac* suddenly began failing to reconnect or even list my SSID after waking from sleep. It showed everything else in the neighborhood, but my own station had been blacklisted somehow.
I could get a connection eventually, but it took 10 or 20 or more on/off cyles of the wifi radar symbol. It got to be very annoying. All the other computers including macs and PCs and ipads that visit my house had no problem. This included a MacBook with the same operating system (but a different wifi card).
I didn't write anything down at first so I'm not sure if it was triggered by an update. It might have started after some of my neighbors bought new routers.
I tried all the suggestions I could find on all the forums, including clearing the keys from key manager, clearing the preferred stations, etc. No luck. Sometimes it would reconnect immediately but the next time it could be very stubborn.
I knew I was getting closer to the snag when I read about 802.11d and country codes. I looked in the system log (kernel.log) with the console and found these lines repeated:
Mar 23 11:49:52 ZZZZZ-iMac kernel[0]: 72833.117059: performCountryCodeOperation: Not connected, scan in progress[0]
Mar 23 11:49:53 ZZZZZ-iMac kernel[0]: en1: 802.11d country code set to 'TW '.
Mar 23 11:49:53 ZZZZZ-iMac kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 56 60 64 149 153 157 161
I definitely do not live in 'TW '.
The number of times this message appeared exactly matched the number of retries that were necessary. The last entry would have my own country code (Finland) and a much longer list of supported channels:
3/25/13 3:10:21.000 kernel: en1: 802.11d country code set to 'FI '.
3/25/13 3:10:21.000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
There are three (illegal ?) routers in my neighborhood advertising TW as the country. (Taiwan maybe?) I discovered how to see the country codes from my neighbors' routers:
(Apple) -> About This Mac -> More info… -> System Report … -> Wi-Fi
Press the Wi-Fi label in the list on the left, not the one on the right-hand side that shows if you hit "Network".
I have an Airport Extreme dual band, and had the 2.4 Ghz on channel 13 and the 5 Ghz on channel 48, to stay clear of other channels in my neighborhood. I began to suspect that these channels may be overlooked or at least given last choice because they were not in the Supported Channels list for TW.
The behavior of protocol 802.11d is to scan for a country code from one of the nearby routers. The question is, what is the search order? You would think it would start with your own router, but maybe they were not on the list because the channels I picked are not valid in all areas. Or maybe it just starts on channel 1 and mine came in last at 13.
So I dropped the 2.4 Ghz channel to channel 2. Immediately the connection became 100% reliable. My explanation could be bogus, but it has worked reliably all week, not a single failure, which means about 30 restarts from sleep, plus a lot of manually run on/off sleep/wake cycles. Before this fix, I could knock myself offline with just one on/off cycle.
Unanswered questions: This is a desktop machine, so why is it so worried that I may have moved to another country since the last session an hour ago? Why can't I set the country code manually?
p.s. Just as one last check I just now switched back to channel 13. It took 10 tries to connect. Back to channel 2, connected immediately.
*configuration info
iMac 21.5 inch mid 2011, OS X Lion 10.7.5
WiFi Card Type AirPort Extreme (0x168C, 0x9A),
Firmware Version: Atheros 9380: 4.0.67.5-P2P
Locale: RoW (?? Does this mean "Rest of World"? I think it should be ETSI, European something or other.)
Maybe this will work for somebody out there.
Jim -
Firewire disk automatically ejects after sleep mode
I have Maxtor OneTouch Firewire drive that occassionally will automatically eject after after my system awakes from sleep mode. Usually just need to power down the disk and then power back up for it to reconnect, but sometimes that doesn't even work. I have latest firmware from Maxtor, but that didn't help. This is really starting to annoy me. Any ideas?
No ideas? anyone??
-
HT1338 no sound through hdmi after sleep mode
I have no sound through the hdmi cable after mac mini wakes up after sleep mode but I do have sound when I resart my mac although Im unable to ajust the volume and the sound icon at the top bar is greyed out..system preferences says the selected device has no output controls for this device and the slider bar it also greyed out..
If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. -
Black Screen after sleep mode, and even after restarting
I've had problems with black screen before, usually after sleep mode. I usually then restart the computer, the sound of turning the computer on is heard and then it is working perfectly...however since last night I tried to restart it, the sound of turning the computer on was heard at a lower level of volume, but the black screen is still there...I have disconnected the computer, taken the battery of the MBP reinsert it, plugged it and turned it on. It worked once, but it is no longer working...PLEASE HELP!!!!!! SOON!!!! I have projects to turn in in a couple of hours.
By the way I have the Snow Leopard OS system
AndySee KB Article: http://support.apple.com/kb/TS2377 MacBook Pro: Distorted video or no video issues
If you are using SL, please correct your system info which shows you are still using "Leopard." Thank you.
!http://i45.tinypic.com/jl0z95.jpg! -
I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
Thanks for any advice you can offer!I have tried all the above and nothing seems to work. Any other suggestions?
Maybe you are looking for
-
Why i can't get latest firmware update for n97?
I can see there is new update for n97 (21.2.045) but update check from phone and pc says i have the latest version. i don;t have latest version. i have september firmware on.
-
In PS module transaction CJ40 after detail planning back button throws out
In CJ40 primary cost planning we come back to annual view by clicking back button now if i press back button system throws out from transaction CJ40 . rather to come back to element overview screen. Anybody can give me solution for this as the user s
-
my iphone 4s is stuck on the "connect to itunes " screen. it will not go away nor will restoring it work either. what do i do?
-
All BAPIs related to a Business Object
Hi All, Is there any way by which we can search for all the BAPIs related to a particular Business Object? For ex. can we write a report prgram through which we can search for BAPIs related to a Business Object. Any pointers in this regard would real
-
Mozilla Firefox Start Page Scam Attachment
On my Firefox Start Page I have been getting the following message under the map of the World- " Mozilla as maker of Firefox is non profit and we rely on donations and grants. If everyone reading this gave $3, we would only have to fundrais 1 day a y