System crash at one end, extremely slow on the other: Using Adobe Connect.
The instructor side is a mac. I can get more info on that later. My system is a windows 7 based unit using Firefox 5.0. I will fill that in later but suffice it to say that all software is up to latest versions on both sides.
Using Adobe Connect for an online class, the instructor's Mac computer kept crashing. He could conduct the class for about 10 minutes. Meanwhile, I saw that when he was connected, my system would slow down to slower than a crawl. If I were to type in these three lines, it would take 3 - 4 minutes just to show up on the screen. When his system crashed, my system would run fine and, as I was still linked to Connect I could talk and chat with the other students. I have the windows tachometer on the screen and it is pinned while he was on line and scarcely above 10 when he was not.
Does this make any sense?
When I check the task manager, it showed that Plugins_container.exe was taking up the CPU time. I looked into defeating the Plugin-Container but that didn't help. I changed over to Internet Explorer but that didn't help. I used a newly set up laptop and IE but that didn't help. It could be my fire wall but it only happend when his system is connected.
If anyone has amy insights on any of all this I would sincerely appreciate hearing about it.
None of that is normal behaviour of Connect.
I suspect perhaps a network firewall or maybe anti-virus scanning.
I suggest that you install the latest Adobe Connect Add-In for the Host or anyone using VOIP audio. The new add-ins are posted to www.connectusers.com under downloads. A new one for each OS was posted a few weeks ago to go with Adobe Connect 8.1.1 and previous versions.
Similar Messages
-
My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?
That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial. -
I just downloaded Yosemite operating system and my computer is extremely slow but also not opening my Adobe applications. Can anyone help? thanks!
First, tell Apple about your problems... with details... and hope for an update that fixes your slowness
Second, Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html -
My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?
My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?
-
One safari is fast but the other one is extremely slow while open the same website!
When i open nrich.maths.org on my two macbook pro, one is fast but the other one is extremely slow. I traced this website on both but seemed nothing difference.
My safaris are both version 5.1.2 (7534.52.7), os are 10.7.2, settings of safaris are same.
I also tried some other sites but all's fast.
Anybody have any ideas?
Appreciate!
TonyOn the one that's slow...
Go to Safari > Preferences - Extensions. If you have any installed, turn that off, quit then relaunch Safari to test.
If it's not an extension issue, try troubleshooting the Safari .plist file.
Go to ~/Library/Preferences. Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Qui then relaunch Safari to test. If Safari speeds up, move that .plist file to the Trash. If not, move it back to the Preferences folder.
Empty the Safari cache more often. From the Safari menu bar click Safari > Empty Cache
If that doesn't help, back to the menu bar, click Safari > Reset Safari. Select the top 5 buttons, click Reset.
~ (Tilde) character represents the Home folder.
For Lion: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library -
Experiencing extreme slowness of the Admin console for any function in Weblogic 12.1.1.
Experiencing extreme slowness of the Admin console for any function in Weblogic 12.1.1.
Configuration is Admin server plus 28 JMS servers - no nodemanager - all on the same server.
When I bring up Admin console alone response is quick but bringing up JMS servers one by one will slow it down.
I did not experience this problem when this configuration was in Weblogic 9.
Memory configuration is -Xms4g, -Xmx4g.
Any ideas what else I should check ?
Thanks.Hi,
Collect multiple thread dump at the interval of 10 sec and check what the threads are doing .
Thread dumps will give you some information about why there is a slowness .
Ways to collect thread dumps
Thread dumps & Ways to take thread dumps - weblogicexpert
Hope it helps -
I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?
connect, then in SystemPreferences/Displays you can set the two as you want.
-
SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu -
trying to find out which adapter to buy which has 30pin socket on one end and lightening plug on other - any help really valued - thanks
Many thanks - I was typing in the wrong keywords - fr your time and trouble.
Dave -
I need to deactivate two old computers and reinstall CS3 on two new computers. How can I do this if one is long gone and the other just crashed?
contact adobe support and request an activation count reset, http://helpx.adobe.com/x-productkb/global/service1.html
-
At the top of my IPhone 5s is a small circle with at arrow on one end and padlock in the middle. Anyone know what that relates too?
That would be rotation lock.
http://support.apple.com/kb/ts3805 -
I have multiple devices with the same cerificate, once I have an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.
== This happened ==
Every time Firefox opened
== I attempt to access a web front end on an IBM SVC deviceYou can't use the same certificate more than once.
See also [[Certificate contains the same serial number as another certificate]] -
I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?
What version of Premiere Elements and on what computer operating system? Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos? ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats? MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374 -
Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.
-
m faceing one error on my screen when m using adobe premiere & save file then the one massage come on my display "adobe premier pro cs6 has been sttoped working" can you resolve the problem
Nobody can tell you anything without system information and other details. Ask in teh Premiere forum and provide al lthe required info.
Mylenium
Maybe you are looking for
-
Hi all, I want to know if is possible to use imessage with people in a different contry
-
Is there a listener fired when coherence client reads cache?
Hello, we have to check (in coherence grid) if we can return certain object from cache for given user. For example he creates filter that will return all cities for given country. But according to user rights - we can't show him cities with populatio
-
My Macbook pro won't sleep while its plugged in
Hello everyone, I bought my macbook pro few months ago. Now i'm facing sleep problem while my laptop is plugged in. I searched on internet try all stuff. but still it won't work. I does my update regularly. This is really **** small problem but it
-
Errors when installing WebPass
Hello, I have some errors when installing WebPass. During the installation, the wizard asked me for the location of httpd.conf. I tried once with standalone Apache server and once with Oracle HTTP Server. Result with standalone Apache server (when ru
-
How do I transfer photos from iphone 4s to a flash drive
How do I transfer photos from iphone 4s to a flash drive