System crash (blue screen) during CD burn

Hello All,
I need your advise due to serious problem with my PC. Per technical specification located in the following site CPU support: the motherboard supports 133/266 MHz FSB and Ratio 12.5.
Unfortunately, I found out that my recently purchased computer doesn’t work at such frequency(FSB=133, Ratio = 12.5), namely, all operation related to the DVD-ROM (Pioneer DVD-120) or Samsung CD-R/RW eventually caused system crash. I tryed to reinstall the OS, however it has not solved the problem. Only frequency decreasing allows to avoid the crash(blue screen of death). The proper volatages and temperature value are as follows: Vcore = 1.74V. PS_3v = 3.25V, PS_5v = 4.95V, PS_12v = 12.24V, Tcpu = 48C, Tsys = 33C.
Please advise,
Thanks, Raz Noam
Here is my configuration:
Athlon XP 2000+
KT4V MS6712 motherboard
256 Mb DDR 333 Smasung
40 Gb IDE master on IDE1
60 Gb IDE slave on IDE1
Samsung SW 248F master
Pioneer DVD-120 slave
Windows XP Home Edition

System crash that I have experienced occurs only during CD Burner or DVD activities. It is very random, however I have notice that when I am burning CD (test mode only) the system crash occurs quite often. I attribute it to the fact that this mode is perhaps harder than only play. However, system crash occurs also during play mode. The crash is actualy stop mode with different error core, I mean, stop 0xd1, 0x0A, 24, 77. BTW, I dissabled autoreboot option. So far it was no problem with reboot after crash. So, I suspected some problem with mainboard, however, perhaps, that PSU can impcat as well. Unfortunately, I have no experience with PC hardware, therefore I need your advice based on rich experience. What I dare to assume that the problem rather in hardware than in SW.

Similar Messages

K8N neo Platinum Win XP SP2 random system crashes/Blue screen

I have recently built a new pc with the items as listed in my signature. Some of the compontents were new (RAM, HDD and VIdeo) and some were second hand (CPU, M/B, Keyboard and Mouse). I found that when I install WIN XP the system seems ok. But after I install any SP1 or SP2 which are required to run the USB2.0 my system crashes randomly and I get a windows blue screen and an auto restart. in the last week it sometimes lasts a day or so then it crashes. Other times it will crash within 5 minutes of start-up. I found a forum topic about a similar problem the other day but when I went looking for it again I couldn't find that topic. In that topic there were comments about PSU's and their ability to run the K8N Neo Platinum. In my specs are my PSU details. Can anyone advise if my PSU may be the problem or if there is any other problem.
I have made a WIN XP boot disk with SP1 and I have an SP2 disk I was given by a PC shop. If you are able to help or need further info to be able to help please let me know.
Regards
Kewlcop

Quote from: PStang on 18-March-05, 05:14:57
i had random shutdowns and blue screens until i uninstalled core center
LOL!
Yet another reason NOT to use Core Center!
This ought to have it's own sticky - Experiencing random reboots & blue screens? Uninstall Core Center first!

PXI-1006 system crahes-Blue Screen

Problem: System Crash - Blue Screen - PXI 1006
I am using NI IPX-1006. Environment: Win NT 4.0 with CVI 5.5.
Problems
1. Everytime the system crashes the .Prj file is lost from the project folder.
2. This time nipalk.sys and nibffrk.dll got corrupted (no entry point found). I replaced those from other system. The corrution message do not come anymore, but as soon as I try to run my test program, it crahses again ....
Blue Screen Message: "KMODE_EXCEPTION-NOT-HNADLED ...Adress FD337FAC has base address at FD327000-NYPALK.SYS ..."
Does anyone has any solutions/ update!
Thank YOU.

Hi Anna:
Primarily it crahses when I open the Measurement and Automation Explorer (as well as run when I run application which uses Digital IO-PXI-6527, GPIB, Relays PXI-2565..). It is NOT a new setup, but the problem is new. Initially it was related to "failure to find entry point to a dll >> nibffrk.dll". Then I copied the dll from another PXI-1006 chasis and replaced in this machine. But problem is still there!
Please note the environment is as follows: PXI-1006 chasis with PXI-6527, 2565, 6070, 4060, 5102; OS WinNT 4.0 - CVI 5.5-Measurement and Automation Explorer 2.0. In my application I am using NI-DAQ driver.
Should I reinstall the machine ?
Thank you very much.
Delowar

I5 17''MBP gets blue screen during install windows 7 32 bit

Hello all:
I heard that quite many people get classic windows' "blue screen" during using windows , whatever Windows XP, Vista or 7. But now i face the "blue screen" during install Windows 7, which means I even can not complete installation.
I bought my Macbook Pro i5 17'' one month ago, and I'm trying to install Windows 7 but I face the problem during the installation. After finishing first 4 steps the computer would restart and start to "finish installation", but at this time it gets "blue screen" and shows "error: 0x0000009c" and stuck there. I have to shut down the turn off button and interrupt the installation.
I don't know if there's any one else face this unlucky situation. I searched on the net and it says the problem could be from memory, graphic card (too new), or even overlocking the cpu,whatever it must be the problem of hardware. I thought it might be the problem of compatible.
If anyone knows how to deal with this problem??!! I do need to use some software under Windows system!

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

What would cause a prolonged blue screen during start up?

I have an iMac desktop. Recently I've had trouble with a prolonged blue screen during start up (approx. 10 mins) before it finally takes me to the login screen. Any ideas why this is happening?
Jeff P.

Hi Jeff,
Open console in Applications>Utilities, check the system log for the date/time of the last problem Startup for clues.

I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

IPhone keeps crashing blue screen

Since I have had my Iphone and upgraded to service pack 2.2.1 every time I plug the iphone into the pc it crashes, blue screen of death or just nothing. I have had the phone wiped three times by me and the apple store still this happens but only it seems if I down load an app from the app store on the iphone, i am now fed up with restoring my phone and it seems I am not alone! Come on Apple!! don't you have enough of our money! help us. I have service pack 3 on the PC, and of interest my ipod mini works fine no problems at all in itunes, it's just the iphone. Please help.. Oh and have tried the web camera thing as well and I have not hacked my iphone either.

I have had this problem as well, that with any photos on my iphone as soon as I connect to laptop it crashes. I do not have any logitech software. My laptop is a Acer Travelmate 6460 and has a built in webcam but I have uninstalled this & still crashes. Strange thing is I have an older Acer laptop and this does not crash.
I have done everything I have seen on discussion forums etc but now getting very frustrated as I have to email the photos off my phone then delete them.
Any help would be appreciated

Getting light blue screen during startup for 3-5 Seconds

I get a light blue screen during start up for about 3-5 seconds. It shows the spinning image for loading, once its done that goes away and then it goes light blue for couple seconds then back to the white page with the apple logo then brings me to the user login page. It also takes longer then usual to start up, load dock and the menu bar. I've read around and it seems people are saying its normal? but this just started happening.

Which model Macbook Pro do you have?
It also takes longer then usual to start up, load dock and the menu bar.
How large is your hard drive and how much hard drive space do you have left?
Go to your Account/Login Items and get rid of all you do not need.

My iMac is frozen on a blue screen during an update software for snow leopard. What do I do? Turn off my imac?

My iMac is frozen on a blue screen during an update of software for snow leopard. What do I do? Should I turn off the computer?

do a hard shutdown of the mac (holding down the power button until it shuts off) then do an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
after doing this reset and restarting the mac, try again to install the update.

Computer always crash (blue screen) while running photomerge (Photoshop CS6)

Doing a photomerge of 6 different pictures, I have a systemic blue screen crash using Photoshop CS6 extended.
There is a win32k.sys error message (page fault in non paged aread).
I tried my photomerge 5 times (once with only 2 pictures) and it always crashed!!!
I have 32 Gb RAM and a i7 3960-X CPU + a GeForce 690 GPU.
Have you heard of such a problem?
Thank you for your help.
Regards,
Alexandre DOLIQUE.

Hi,
Thank you both Alec and Chris.
My OS is windows 7 64 bits with SP1. I ran windows update to make sure I had everything up to date. I ran an update of my graphic card driver (Nvidia).
I am still having the problem.
The weird part is: I am also having a BSOD while trying to photomerge with Photoshop CS5.1 (included in Master Collection C5.5).
I have ran applications using memory and CPU intensively (DxO treating a series of RAW) and had no BSOD.
I would agree with you Chris if I was having BSOD runing other applications or even Photoshop during another treatment than photomerge.
The fact that I am always having BSOD while runing photomerge is puzzling to the least.
I believe there were Windows 7 updated executed since I last had photomerge working.
The only thing I know now, is that photomerge is not working anymore. Everytime I tried, I had a BSOD.
Regards,
Alexandre DOLIQUE.

Windows 7 Crash (Blue Screen) with Skype 6.18 on H...

Hi,
I think a lot of people are having the same problem with Skype 6.18 on HP Pavilion notebooks.
Windows 7 crashes during the auto-update or installation of 6.18
After about 3-4 hours of troubleshooting the Blue Screen / service exception error (in ks.sys) I discovered that it's caused by the HP HD Webcam [Fixed] driver (version is 6.0.1113.1 released 2012-11-20 (or 20-11-2012)).
The driver is written by Sonix and is unlikely to be updated. So you have the choice of going back to an older version of Skype or disabling the webcam / driver through Device Manager. As soon as you disable the driver / device Skype will install / start - but of course you won't be able to use video during Skype calls.
Hopefully Microsoft / Skype will fix the driver incompatibility in a future release.
Skype Support - the issue is with the HP / Sonix driver - file is snp2uvc.sys
There are similar issues reported with a previous version of the HP HD Webcam driver as well (SPUVCBv_x64.sys).
Please fix it. I'd like to use video in calls again!

The best working solution at this time is to download and install Skype 6.14 and disable updates. If you still get prompts to upgrade you can ignore them and the program should continue to function as it has not been retired as of yet. Hopefully there will be a resolution in a future Skype update or an updated driver from HP that might resolve the issue.
http://community.skype.com/t5/Windows-desktop-client/BSOD-on-startup-and-installation/m-p/3511645/hi...

S10-3t. Help, my computer crash & blue screen almost all the time

hello,
I have problem with my new bought S10-3t, it comes with pre-installed win 7 home premium. I am not sure if it is coming from the hardware or software, but it does crash and blue screen a lot and almost every time. Especially when I am trying to update windows (it always require me to reset it back to factory setting after did this).
Btw, I have uninstall some of the bloated software that came with the system and I also installed Norton Internet Securtiy on it. I have also done one recovery restore many times and the problem still persist. Now I am wondering either I should return it back to lenovo or keep it because I am sure its going to be a hassle to return it back

afham_86,
Systems should be tolerant of some software changes - not know what all you have removed, how you removed it (deleting files vs uninstall) and when the problems started in relation to the changes you made it's going to be difficult to provide an easy answer.
You say you've used OKR.   Have you shutdown the system and started up with the recover button and selected the option to restore to factory state?   If it won't do this, then either the hard disk is corrupted and you are going to need service, or you have a memory or systemboard issue in which case you are going to need service.
I would recommend trying to recover completely to factory state, and failing that, to call technical support and log your case. (save the WNxxxxx number).   If service recommends repair, you can either send it to the depot and see if they can fix it, or contact sales and arrange for a replacement. In order to work through sales, you will need to have called service and have that service case number handy.
Sorry that you are having trouble.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Blue Screen during Windows install on SATA Raid1

Hi Folks!
I have a BIG problem with my brand new Eclipse SLI.
I can't install Windows (tried Vista and XP x64). It crashes already in the beginning!!!
I'm not an OC,yet so all my settings are like default or AUTO. Only my memory I set to 1600 through automatic settings.
Flashed in a brand new 1.6 BIOS.
Now, anytime I start the Windows setup if crashes with a blue screen when it comes to the point it tries to access the hard discs.
I was already able to set up a new partition and then Visat was extracting files. But after a few minutes (1% finished) it crash.
The blue screen indicates that it had problems to write a file.
Thing is ... it's always at different times, but still at the beginning of the setup. Sometime it don't get the setup even running.
I tried the Drive Booster RAID and the JMicron. Always created a new RAID1!
Sometimes the board freezed even by entering the BIOS.
I already figured it my be to hot.
Here my temperatures. CPU: 28- 35C, IOH: 50-68C, System: 35C
But I already read that IOH temperatur seems normal.
So what's the problem?
PLEEEEEAAAASSEEEEE HEEEEEEEEEELP !!!!

Thanks!
Found myself a solution. Deactivated all additional features in the BIOS. Now it'S working even with 1600 RAM frequency.
Trying now to still do some OC without getting into the same trouble.
Jan.

Constant flashing blue screen during operation?

I keep having the screen turn blue and then suddenly go back to normal. It's a quick flash, totally random, repetitive during operation, no noises, and nothing else is interrupted. It does not restart, log off, or try to. Is it about to die?

While she may be using the wrong hardware for this community, It might be a pertinent question for some folks.
I have a 2006 Mac Pro and I an experiencing the exact same problem. Random blue screens, I can still type and move the mouse (not seeing any of it on screen until the random blue screen goes away).
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          5 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
NVIDIA GeForce 7300 GT:
Chipset Model:          NVIDIA GeForce 7300 GT
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0393
Revision ID:          0x00a1
ROM Revision:          3011
Displays:
Display Connector:
Status:          No Display Connected
70GX2:
Resolution:          1280 x 1024 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          69109184GA
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Running the latest update of Lion and it started with the latest update.
I installed Snow Leopard on another disk, and the problem went away, until I updated it to 10.6.8.

System crash (blue screen) during CD burn

Similar Messages

Maybe you are looking for