System creation

Hi Friends,
I am trying to create a system for ECC6.0 in portal. Where can i find the informations that i need to fill in for WAS, ITS, Connector etc.. while creating a system? Is there any transaction at the R/3 side where i can get these info like gateway, Web AS HOST, ports etc..?
Please let me know. Thanks in advance.
Regards,
Nathan

Hi Nathan,
Try if this works out for you and do get back
WAS Details
1. Goto se37 type : RSBB_URL_PREFIX_GET , execute ->
I_Handler class : CL_RSR_WWW_HTTP ->clear the I_message server entry -> execute -> WAS Details
ITS DEtails
1. goto se37 typr : RSBB_URL_PREFIX_GET , execute ->
I_Handler class : CL_HTTP_EXT_ITS ->clear the I_message
server entry -> execute -> ITS Details
use the values before its and like /sap/bc/gui/sap and ignore the rest
Regards
Vineeth

Similar Messages

Source system creation

hi experts,
this is the first time i am creating source system
i am have requirement to load data one bw system to another bi system,
so, to do that i defined and created logical system in bw for bi system and
i created same for bw in bi system also and everything is ok.
i guess my next step is to create source system(my self) for bw in bi .
when i am trying to create it is showing that it is already exists.and here what type of source system i need to choose. i am not founding any my self bw data mart
status symbol under source system creation node and what type of the source system i need to choose and whether it is manually or automatically.if i choose automatically it is asking create new destination ,create back ground user and connection of source system to bw (it is asking to fill all fields),for manual system creation only logical system and rfc destination. is it required to creat source system or not because my self bw data mart symbol is present in bw system and bi system also.please correct me if anything wrong
thanks
venu

hi chandra shekhar &chitrat,
thanks for your quick reply,when i choose sap business information symbol
it is asking to fill all the entries like crate new destination under this i provided
target computer in this i provided ip address of bi system( i am creating in bw system),system id & system number,and back groung user in source system and
password ,connection to the source system ,target system for back ground user
and connection to the source system what i need to provide
thanks
venu

Source System creation in BI 7.0 for SQL Server using DB Connect

Hi
My requirement is to extract data from SQL Server 2005 to BI 7.0 using DB Connect.
I need to create a SOURCE SYSTEM for that purpose,As i am new to BW i don't know how to start to create a SOURCE SYSTEM.
What are the parameters i require either from Basis team to install or for DB team User ID in SQL (What type of user).
Questions:
1) create a db user with authorization to read this views.......as i created views on tables...do i need authorisation to read table or views
"On BW Server side (If BW server isn't based on SQL Server):
(1) Install SQL Server client and test connection to SQL Server DB.
(2) Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel)"
How can i know on which server our BW System is Based and HOW Install SQL Server client and test connection to SQL Server DB and
Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel
and
how to create Source System to SQL Server on BW
Please update me in details i this is my first Source System Creation in BW
Thanks in advance

go through the link this may be helpful http://msdn.microsoft.com/en-us/library/dd299430.aspx

No option for system creation in system landscape.

Hello all,
I have the super admin role and i have checked the permission for applications in Syst Admin -> Permission ->Applications, it shows " owner " but still i am not getting the option for system creation when i go to Sys Admin->Sys Conf->Sys landscape->
It is only showing the option to create folders, change ID and Refresh. Earlier I used to get the option and i have created some "Systems" but now niether i can create nor i can open the existing system objects.
Thanks,
Neil

Hi,
Try by assigning administrator role for the user. it will work.
If not come again.

Error while source system creation/Source system transport

Hi,
     In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
     Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
     I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
     Message no. RSAR502
Diagnosis
     With Remote Function Call to system GWPCLNT900 error connection closed
     (no data) ccurred.
Procedure
     Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
Krishna

Hi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier

ESS application systems creation in Portal content area

Hi ESS experts,
I had struck up in the systems creation part of the ESS implementation in EP7, ECC6.
I have the ESS set up guide by Siddhartha Jain which is just short of details on how to set up the systems for system alias SAP_Webdynpro_XSS, ITS, and back end R/3 system creation in the system and how to test the connections.
Can any one give a detail guide on how to set up the various systems in the Portal content directory to that the Ess application can be launched in the portal?
I had deployed the BP as described in the guide (and guided by the forum members) and all my Jco connections are Green in color. I need to complete the system creation and user creation in the portal and launch the ESS applicaiton in portal.
(Set up the first system on the Portal J2EE server in which the business package has been implemented and assign the system the alias SAP_WebDynpro_XSS.) Here is the step I need help!!!
Please help, and thanks in advance,
Regards

Hi Vinod,
Thanks for the immediate response.
Can you please guide me on the below statement?
>>>Then you need to specify the details of that system and various other properties
Assign the aliases and then test the connectivity. <<<
I do not know which are the system details and other properties that need to be defined to get the connection test passed. I am very new to portal and I need your advise and guidance.
Please help.
Thanks and regards

With out source system creation we have transported all the flow

Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran Kumar

Hi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet

R/3 Source system creation

Hello,
I wish to add an R/3 system to my BI 7.0 system. What exactly do I need to enter in the "Create SAP Source System" window? Should I leave backgrounduser as ALEREMOTE? I dont see any option of automatic source system creation. Could u pls help me with a step by step solution.
Thanks. POINTS WILL BE GIVEN.
SD

Hi
Defining the source system
As of release 640, you can use upper and lower case characters for R/3 user passwords. This is only uppercase characters for previous releases. Remember that your passwords are automatically converted to uppercase in previous Basis releases.
As BI 7.0 System has Basis 700 below, upper and lower case passwords are important.
So, for defining source system is almost same as ordinary BW Source System definitions.
One more important thing is that you have to take into account the EDI Ports. This may cancel your system definition if the <spsettings are not correct. This settings must be controlled on both BI and Source System.</p>
Here are the steps to configure Source System with Basis Relase lower than 640 in BI 70:
1. Take a look at table EDIPORT of your BW system and note the next free number for the field "Port". This is the adjacent number of the highest entry like 'A0000000123' for example. In this case e.g. take '124'.
2. Choose transaction "snum" and object "ediport".
Select "number ranges" from the menu "Goto" and here the button "status".
Change the CURRENT NUMBER of the ranges to the next free number you noted from table EDIPORT.
If the number range of your BW system is correct please check the same in your OLTP system.
3. Call TCODE RSA1 on BI System in BI Client.
4. Select Source Systems on Left Menu
5. Left Click SAP System and Choose Create
6. Important think is, as source system has Basis Release Lower than 640, You have to give All Passwords (For BI ALEREMOTE User and for Source System ALEREMOTE User) in UPPERCASE.
My Favourite is giving RFCCPIC for ALEREMOTE Passwords.
7. It Must Be OK.
Assign points if it helps
Regards,
Sumit

Error: 3816: Local System Creation during install was not successful.

Hello,
This is our first time installing Oracle Wokflow 2.6.3 Standalone.
We are having problems with the Event Manager.
When we access the event manager pages:
pls/wf/wf_event_html.listevents?resetcookie=T
pls/wf/wf_event_html.listsystems?resetcookie=T
etc.
We get this error:
Error: 3816: Local System Creation during install was not successful. Please review the install log file for errors.
Error Stack:
WF_EVENT_HTML.isAccessible(EVENTS)
WF_EVENT_HTML.ListEvents()
     The installation was successful.
     We cannot change the Local System in the Global Workflow Preferences option.
     The table WF_systems is empty.
     Should the local system appear in this table?
Thanks

Software component sap.com/LM-TOOLS with version 7.00.9.3 is found on the system but in the stack it is listed with version 7.00.9.0.
Software component sap.com/SAP-JEECOR with version 7.00.9.1 is found on the system but in the stack it is listed with version 7.00.9.0.
You are trying to upgrade a system with the lower version of sap.com/LM-TOOLS and sap.com/SAP-JEECOR. The other thing I notice is that if you are upgrading to EhP4/EhP1 NW then the version of LM and SAP-JEECOR should look something like 7.01.3.0.
Are you using MOPZ to download EhP's ? As the error message says synchronize the system with SAP Solution Manager and then generate a new stack file.
Hope this helps.
Thanks,
Naveed

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

Using Inbound IDOC from Java system creation of Outbound delivery

Dear Experts,
The scenario we are having is really very interesting. Hopefully its a good learning for me and also for others also.
The scenario is,
After sales order creation the details will be sent to one Non SAP system (Java) for performing some tasks related to forwarding agent decision, shipping date and etc. Once the details are finalized in that Java system then, the details needs to be transferred to SAP as "Inbound IDOC" process. For this proposed to use the SAP Jco middle ware.
Once the details transfered from Java system to SAP then, the outbound IDOC needs to get generated automatically. Assuming the stock for that sales order line item is available. Also one more complexity is, our client is using custom transaction (ZVl10C) for delivery creation.
Now Query is,
1. Which IDOC, message type and Functional module needs to be used for creating the delivery automatically..??
2. As per assumption, stock of that sales order line item should be available. Due to some business reason the stock was removed during inbound IDOC transfer then, what will happen to the IDOC..?. How to avoid this situation..??
3. As we told we are re going to use SAP Jco b/w SAP & Java system. In this case, how the data will get transfered from Java system to SAP..?
Thanks in advance for the replies I am going to get
Regards,
VEL

Thanks for the feedback. This question is resolved

IN R/3 SYS logical system creation

Hi people
         in idoc2file scenario i created logical system for 2 clients
          1. is for r/3 system for example 800 (LS800)
          2. is for pi system for example 100(LS100) in r/3 system only i created this two LS
so creation is completed
         after that what i did, assigned clients this client should be a cross are not means
   we have to assign          800 to LS100
                      and           100 to LS800   this is correct are not
pls tell me to ASAP
regards
shekar

we have to assign 800 to LS100
and 100 to LS800 this is correct are not
No. There is no such cross assignment. For a particular client, u have to assign the logical system name and thats it
Regards,
Prateek

JAVA iso9660/UDF file system creation

Is there a class or utility in JAVA that will allow the creation of an iso9660 file system for CD's and/or the creation of a UDF file system for DVD's? I am looking for such a class to incorporate into an applcation that is currently under development, and would rather not have to write our own.
Thanks.

Is there a class or utility in JAVA that will allow the creation of an iso9660 file system for CD's and/or the creation of a UDF file system for DVD's? I am looking for such a class to incorporate into an applcation that is currently under development, and would rather not have to write our own.
Thanks.

R/3 Source system creation for BW

Hi Guru's,
How to create R/3 Source system in BW3.5(Version:IDES) of logical system name- T90CLNT090.
Please tell me what shud be the IP Address and Login details (Userid= ALE_MASTER). If possible plz give me the Password for user ALE_MASTER.
Points will be rewarded those give all the answers for questions mentioned above.
Thank you.

Hi Harshal,
You can choose to create a new R/3 source system using the first option (Automatic Creation). Here, you create a new destination and give the details of the new server details (your IDES system). This will create all the necessary ports and connections.
Here, you will need to create a system user (ALE_MASTER in your case). Setup this user as a system user in transaction SU01 before you start creating the connection to the new system. Create this user in both systems (BW and IDES).
Password for ALE_MASTER can be anything you set. Just remember the password if any maintenance of this user is needed in future.
Hope this helps.
Thanks and Regards
Subray Hegde

Application System creation problem

Hi All !
We are using Designer 6.0 and Oracle 8.1.5
After successful login when we try to create Application System following
error message appears:
RME-00011: Operation 'INS' on ci_application_systems has failed
When we try see the Cause/Action, we find following:
// Cause: An API operation request has been failed for some reason
// Action: Examine other reported errors for specific details.
It is to be noted that we don't get any other error message and we can not
move forward without creation of application system.
Prompt help would be highly appreciated.
Atul
null

Hello Atul,
I had the same problem with 8.1.6.
Solution:
edit init.ora
set the following:
large_pool_size = 2097152
should work
Juergen
null

ESS System creation required or not

Hi All,
For ESS Configuration(XSS 600 sp13, ESS_BP1.0) in portal 7.0 , does the creation of system (SAP_WebDynpro_XSS )from system administration->system configuration is required or not? Portal,XSS,ESS_BP all are on same J2EE Stack, I am asking this because in the ess iview i didnot found the system propery which used to be there with value "SAP_WebDynpro_XSS " for earlier versions.Now I am not seeing the system property, so how does the iview is identifying where the webdynpro applications are running.
One more question on the execution flow of ess, when we click ESS tab in portal, the iview overviewpage launches the XSSMenu webdynpro application and the result is building the ess overview page in portal by reading the homepage framework from backend,from next time when we click specific service from ess overviewpage for example address application, then whats happening does it reading the img config again or it has in memory from the first call and knows which iview it has to invoke and which webdynpro application.
Thanks,
PKV.

In other words what are the process steps taking place
1) on clicking the ESS tab in portal displays overviewpage in portal with areas,subareas,services.
2)on clicking service link ilike address in portal ess overviewpage displays address application in iview in a page.
On the above two steps can you tell the interaction between nw04s portal7.0 and backend ECC6.0
I think for first step the overview iview calls the webdynpro XSSMenu application with parameters which generates overviewpage in portal by reading hompage configuration.
what about second step on clicking the service link of address application does it reads the homepage configuration again or uses from session which it got from first step and the address iview launches address webdynpro application?
Thanks,
pkv.

System creation

Similar Messages

Maybe you are looking for