System Data for RCA

Hi,
We are working in the ERP Diagnostic project on the Solman and have to configure the RCA.
We are getting data mismatch between EWA report and system data which we have collected.
I need your help to collect the following correct data
Max. Active Users
Avg. Response Time at Peak Dialog Hour
Avg. DB Request Time in Dialog Task
Max. CPU Utilization on Appl. Server
Please help me to get the correct data (mean where can i check to get the correct data) from the system.
Note:-  Above all data i have collect from the satellite systems (ECC, CRM, BW, APO, SRM  and XI) which are connected to solman.
Regards,
Shanti Prajapati

Hello Shanthi,
I would recommend you go through Diagnostics setup guide available in SMP.
https://websmp202.sap-ag.de/instguides --> SAP Components --> SAP Solution manager
You can find the accurate data from satellite systems and compare the values with solman system. But I would ask you go through the setup guide to cross check the setup in solman.
Max. Active Users - AL08. For history you need to check ST03N
Avg. Response Time at Peak Dialog Hour - ST03N
Avg. DB Request Time in Dialog Task - ST03N
Max. CPU Utilization on Appl. Server - ST06/ST06N
Hope it helps. Please let us know if you still need further clarification. Good luck.
Thanks,
Siva Kumar

Similar Messages

  • Issue regarding condition pricing date as system date for some condition types in sales order

    Hi
    I have already created a sales order on 30.04.2014. Today I am adding new line item to sales order in VA02 transaction. in this order new line items condition pricing date for conditions JEX2,JECX should show as 12.06.2014. But currently it is showing as 30.04.2014. I need condition pricing date as system date for above conditions.
    Regards
    prashant

    Hi
    When I am changing pricing date VBKD-PRSDT in sales order header . It is changing the condition pricing date for all. Sales order is created on 04.06.2014. I have added line item 150 on 14.06.2014.
    After adding line item 150 , there I have changed the pricing date as 14.06.2014. in sales A tab of item 150. But still it is taking from Sales order header date as 04.06.2014 for all conditions. But my requirement is for line item it should take as system date for some conditions like JEX2,JECX& JA1Y but for other conditions it will take as Order creation date. Please suggest. I have also attached screen shot below. please go through it.
    Regards
    PK
    Sales order header change mode VA02
    Here pricing date VBKD-PRSDT = 04.06.2016
    Item change mode
    I have added new line item 150 on 14.06.2014
    Changed the condition pricing date to 14.06.2014 & saved
    After saving I have gone to Va02 screen of line item 150
    & there I have gone to condition pricing date field from item condition tab
    for JEX2 condition type but still here condition pricing date is showing as
    04.06.2014 as below.
    Condition pricing date
    My requirement is like this
    For some particular conditions like JEX2  condition pricing date will take as system
    date instead sales order creation date when I will add a new item 150 on
    14.06.2014.but for other conditions it will show as order creation date for the
    same line item 150 .

  • Setting System Date for the Deadline branch of a block

    Hi,
    We have a IDocs->XI->File scenario. We need to collect the idocs coming from ISU system and do a N:1 mapping into a single file. We need to end the collection process everyday at a particular time...
    In ABAP workflows if we are using a block for its deadline condition we can give %DATUM%. This will provide the system date in that place.
    In BPM in XI in place of %DATUM% what we'll have to provide so that we can do the same so that the system date comes into that place.
    Thanks & regards,
    Jayakrishnan

    One more way is to send a "stop collection" message from a proxy, chk this link
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm
    you ve to customize what Maranani describes so that the message is a "stop" rather than a "start" , hope it helps

  • Create directory with system date for export files

    Hello,
    I have a requirement to add the system date folder automatically, as the exports files dumps get into to d:\oracle\exp\..... this should be d:\oracle\exp\03182009. for each day it should create these date folder to dump the export files.
    here I am sending two of my scirpts .
    first one is
    set ORACLE_SID=%1
    set PATH=D:\ORACLE\ora102\bin;C:\WINNT\system32;C:\WINNT
    set LOCAL=2:%1
    net use h: /delete
    net use login
    sqlplus test/test@%1 @d:\oracle\dba\apps\expfull\buildfile < d:\oracle\dba\apps\expfull\enter.txt
    exp parfile=h:\admin\%1\exp\%1_FULL.par
    call h:\admin\%1\exp\%1_FULL.cmd
    this is the buildfile script
    set term on
    set head off
    set feed off
    set ver off
    set lines 159
    set pages 0
    set wrap on
    set concat off
    clear columns
    clear computes
    clear breaks
    clear buffer
    ttitle off
    btitle off
    col dbnm new_value sid_dir noprint
    col parnm new_value parfil noprint
    col dmpnm new_value dmpfil noprint
    col lognm new_value logfil noprint
    col lstnm new_value lstfil noprint
    col zipnm new_value zipfil noprint
    col cmdnm new_value cmdfil noprint
    col ownr new_value ownername noprint
    col tabnm new_value tabname noprint
    col partnm new_value partname noprint
    col datest new_value datestmp noprint
    -- Load the sid_dir, ownername, tabname, partname, and datestmp substitution variables.
    select
    name dbnm
    , to_char(sysdate,'YYYYMMDD')||'_'||'N' datest
    , upper('&1') ownr
    , upper('&2') tabnm
    , upper('&3') partnm
    from v$database;
    -- Load the filename substitution variables.
    select
    '&sid_dir'||'_'||'&ownername'||'_'||'&partname'||'.par' parnm
    , '&sid_dir'||'_'||'&ownername'||'_'||'&partname'||'_'||'&datestmp'||'.dmp' dmpnm
    , '&sid_dir'||'_'||'&ownername'||'_'||'&partname'||'_'||'&datestmp'||'.log' lognm
    , '&sid_dir'||'_'||'&ownername'||'_'||'&partname'||'_'||'&datestmp'||'.zip' zipnm
    , '&sid_dir'||'_'||'&ownername'||'_'||'&partname'||'.lst' lstnm
    , '&sid_dir'||'_'||'&ownername'||'_'||'&partname'||'.cmd' cmdnm
    from dual;
    -- Build the export parameter file.
    spool h:\admin\&sid_dir\exp\&parfil
    prompt userid=test/test@&sid_dir
    prompt buffer=4194304
    prompt direct=Y
    prompt recordlength=65535
    prompt consistent=Y
    prompt file=h:\admin\&sid_dir\exp\&dmpfil
    prompt log=h:\admin\&sid_dir\exp\&logfil
    prompt tables=(&ownername.&tabname:&partname)
    spool off
    Please help out...

    >
    I have a requirement to add the system date folder automatically, as the exports files
    dumps get into to d:\oracle\exp\..... this should be d:\oracle\exp\03182009. for each
    day it should create these date folder to dump the export files.OK - well, you will (AFAICR) have to create the directory, then cd into it,
    then run your script - I don't see what the problem is?
    You could* do something like -
    at 00:01 run a cron job that simply does something like this
    (I'm just giving outline - not a particular implementation)
    runs date
    gets the day, month and year from that -
    export MyDay=day
    export MyMonth=month
    export MyYear=year
    mkdir /path/to/dir/oracle/exp/$MyDay$MyMonth$MyYear
    At the beginning of your script, before going into SQLPlus
    ----Your usual stuff------------
    set ORACLE_SID=%1
    set PATH=D:\ORACLE\ora102\bin;C:\WINNT\system32;C:\WINNT
    set LOCAL=2:%1
    net use h: /delete
    net use login
    ++++plus
    cd /path/to/dir/oracle/exp/$MyDay$MyMonth$MyYear
    Maybe this will be a help to get you started - it could probably be much more elegant in
    Python or whatever, but if shell-scripting is the way you want to go...
    I'd be interested to see if this can provide the basis for a solution.
    HTH and TIA.
    Paul...

  • How to make the prompt to pick the system date automatically at run time?

    Hi,
    I trying to create a publication for a report that has date prompt, When I try to schedule this publication  the query should automatically select system date for date prompt and and send out the report. Is there a way to do this in CMC?
    Thanks in advance
    Hema

    Hi Hema,
    You need to create this Exit Variable with the condition that it should be generated ias a optional variable in the universe.
    The reason for being is that when the prompt screen is appeared there is no default value which will be shown in the prompt. But when you press the run query button (will be enabled only after you make the prompt as optional) the BO query will fetch the data applying the restriction of the sysdate.
    I hope I have made myself clear.
    Regards,
    Rohit

  • How can I set document date automatically as system date?

    I use FBV1, FBV2, F-02, FB02. Posting date is automatically set as system date. I want to set document date automatically as system date.
    How can I set document date automaticall as system date?
    Wbr.
    İlker Çokkeçeci
    Computer Engineer
    Ankara, Turkey

    Hi Expert,
    Please refer the below link..
    Document date to be defaulted as system date for all FI transactions
    as there mentioned, please go to T-Code: SHD0.
    Regards,
    GK
    SAP

  • Defaulting the Document date to system date while GR cancelation via MIGO

    Hi All,
    While canceling a GR via MIGO transaction, i manually change the Document date to system date, but after posting still the document date is showing the original document date when is was posted.
    Is this is the standard behavior?
    I have a requirement to make this date default to system date. But it is not considering the date which we centered in the screen.
    Kindly help me to resolve this issue.
    Srinu Kaduri

    Hi,
    while doing GR cancellation,system will take only system date for example today will be in the document date.
    With Regards,
    Jaheer

  • Req. delivery date is taking other date than system date in va01

    DEAR SAP GURUS ,
    I am facing one porblem . when i am creating a sales order then in sales tab ( the very first tab ) in req. delivery date field it is picking other date than current system date . for example today (10.04.2009)
    i am creating a sales order then it is showing 14 .04.2009 . but i want it should show today's date .
    what is the problem and how can i resolve it in spro . i don't wish to do it by user exit or badi .
    plz help me out to solve it through customization .
    THANKS ,
    AMIT RANJAN

    Hi,
    Check these links..
    the Requested delivery date is determined based on the lead time specified in the definition fo the sales document type in VOV8.
    https://forums.sdn.sap.com/click.jspa?searchID=24726102&messageID=4378484
    Requested delivery date not the Current Date?
    Sales Order - Requested Delivey Date
    Regards,
    Omkaram.

  • Web template precalculation - system date as variable

    Hi,
    I would like to define a RA setting for a web template precalculation.
    The underlying query makes use of a date variable that should automatically pick up the system date.
    How can I define a variant for precalculation that automatically selects the system date?
    Thxs.
    Laurent Querella

    Hi Josef,
    I was reading thru this thread and was wondering if you can help with this.
    I am using key due date, posting date and clearing date variables in an aged recievables query and the Key due date is user entry and that is used to determine both posting date and clearing date by filling them for each aging buckets.
    I tried using the variable 0DAT to see if I can use that to populate the system date for the key due date but it is coming up with errors that posting date is not determined.
    Hope u can help
    Thanks

  • CCMS alert monitoring data for ORACLE is not visible in Central system

    Hello,
    I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
    Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
    Thanks,
    Vinod Meno

    Bhudev,
    Thanks for the quick respose..
    1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
    2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
    I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
    Regards,
    Vinod Menon

  • Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed

    SharePoint 2010 -
    I have created a console utility that further calls the stsadm.exe to Export sites from one site collection in a DB to another site collection in another DB of the same web application.
    Export works fine. But during Import, I get the following errors
    [ListItem] [Admin] Progress: Importing
    [ListItem] [Admin]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Hol plans.xls] Progress: Importing
    [ListItem] [Hol plans.xls]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Time.doc] Progress: Importing
    [ListItem] [Time.doc]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [AP Docs] Progress: Importing
    [ListItem] [AP Docs]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Update - June 27th.pdf] Progress: Importing
    [ListItem] [Update - June 27th.pdf]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    [ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    [ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    FatalError: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    Progress: Import did not complete.
    1. Does the console application treated as a Sandbox Solution?
    2. Do I need to configure CAS policy in wss_usercode.config? and what?
    3. What else could be configured to make this work?
    I have tried adding the following in wss_custom_minimaltrust.config but no avail.
    <SecurityClass Name="SqlClientPermission" Description="System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>           
    and
    <PermissionSet
                        class="NamedPermissionSet"
                        version="1"
                        Name="SPRestricted">
    <IPermission
                          class="SqlClientPermission"
                          version="1"
                          Unrestricted="true"
                                />   
    <!-- Other IPermission -->
    </PermissionSet>
    UPDATE: It has been observed that the issue is intermittent. That is, sometimes the import works fine (event without any configuration of SqlClientPermission in any config file) but sometimes it gives the above error. I'm stuck!
    Regards, Amit Gupta

    Hi,
    According to your post, my understanding is that you get Error “Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed
    Simple solution is to change the trust the trust level to FULL: <trust   level="[Full]"    originUrl="URL" />
    In addition, you can modify the wss_mediumtrust.config and wss_minimaltrust.config file under the path “C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG”.
    For more information, you can refer to:
    http://blogs.msdn.com/b/navdeepm/archive/2010/02/19/system-security-securityexception-request-for-the-permission-of-type-system-data-sqlclient-sqlclientpermission-system-data-version-2-0-0-0-culture-neutral-publickeytoken-b77a5c561934e089-failed.aspx
    http://www.fewlines4biju.com/2011/01/request-for-permission-of-type_18.html
    http://techsolutions-at-desk.blogspot.com/2011/08/request-for-permission-of-type.html
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

    Hi ,
    We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and  as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
    We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
    "The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
    this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
    Please let us know reason behind this error message.
    Thanks,
    Mruduala

    You are kidding?  It took me about 3 minutes to scroll down on my tab to get to the triplex button!
    Habe you read the error message? 
    Quote:
    java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
    Check the trigger and it should work again.
    Timo

  • The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. InnerException: Requested registry access is not allowed.

    I have read some of the other posts for people that got this error, but none seem to apply to me.
    My program has been working for weeks.  I made some minor changes, and started getting the error (full details below).
    I did a TFS "undo pending changes" and still getting the same error, even after logging off.  The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
    I'm an Admin own my own box (running WIn XP SP3).  I even tried "Run as Admin" on Visual Studio.
    I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
    We have two other developers, one has the same problem, one does not.  In theory, we have all done "get latest" and are running the same code.
    The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
    When I do "Start Run" in Visual Studio, I get this error:
    {"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
    with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
    and it has InnerException: {"Requested registry access is not allowed. "}
    Outmost StackTrace:
       at System.Data.SqlClient.SqlConnection..ctor()
       at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
       at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
       at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
       at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
       at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
       at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
       at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
       at System.Diagnostics.TraceSource.TraceInformation(String message)
       at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
       at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
       at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
       at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
    Second Inner StackTrace:
       at System.Data.SqlClient.SqlConnection..cctor()
    Third Inner StackTrace:
          at System.Data.SqlClient.SqlConnectionFactory..cctor()
    When I do "Run as Admin", I get this error:
    {"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
    Server stack trace:
       at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
       at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
       at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
       at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
       at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
       at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
       at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
       at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
       at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
       at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ThreadHelper.ThreadStart()
    I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing. 
    Client app.config
    <?xml version="1.0" encoding="utf-8" ?>
    <configuration>
      <connectionStrings>
      </connectionStrings>
      <system.serviceModel>
        <behaviors>
          <serviceBehaviors>
            <behavior name="ServiceBehavior">
              <serviceMetadata httpGetEnabled="true"/>
              <serviceDebug includeExceptionDetailInFaults="false"/>
              <serviceAuthorization impersonateCallerForAllOperations="true"/>
            </behavior>
          </serviceBehaviors>
          <endpointBehaviors>
            <behavior name="FRB.AllowImpersonate">
              <clientCredentials>
                <windows allowedImpersonationLevel="Impersonation"/>
              </clientCredentials>
            </behavior>
          </endpointBehaviors>
        </behaviors>
        <bindings>
          <wsHttpBinding>
            <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
              openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
              bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
              maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
              messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
              allowCookies="false">
              <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
                maxBytesPerRead="4096" maxNameTableCharCount="16384" />
              <reliableSession ordered="true" inactivityTimeout="00:10:00"
                enabled="false" />
              <security mode="Message">
                <transport clientCredentialType="Windows" proxyCredentialType="None"
                  realm="" />
                <message clientCredentialType="Windows" negotiateServiceCredential="true"
                  algorithmSuite="Default" />
              </security>
            </binding>
          </wsHttpBinding>
        </bindings>
            <client>
                  <endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
                        bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
                        name="WSHttpBinding_IAdminService">
                        <identity>
                              <dns value="localhost" />
                        </identity>
                  </endpoint>
            </client>
        </system.serviceModel>
    </configuration>
    web.config of WCF service:
      <?xml version="1.0"?>
    <configuration>
        <configSections>
        <section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
      </configSections>
        <appSettings>
           <!-- whatever goes here -->
        </appSettings>
        <!-- connection string section -->
      <connectionStrings>
        <add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
        <add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
        <add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=myserver;Initial
    Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient"/>
      </connectionStrings>
        <!-- FRB.Diagnostics logging section -->
        <FRB.Diagnostics>
            <sqlTraceListeners>
                <sqlTraceListener name="sqlTraceListenerSettings"
                            connectionStringName="log"
                            commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
                            commandType="Text">
                    <parameters>
                        <parameter name="@Source" propertyToken="{Source}"/>
                        <parameter name="@ActivityId" propertyToken="{ActivityId}"/>
                        <parameter name="@ProcessId" propertyToken="{ProcessId}"/>
                        <parameter name="@ThreadId" propertyToken="{ThreadId}"/>
                        <parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
                        <parameter name="@Message" propertyToken="{Message}"/>
                        <parameter name="@Timestamp" propertyToken="{DateTime}"/>
              <!-- <parameter name="@UserId" propertyToken="{WindowsIdentity}"/> -->
            </parameters>
                </sqlTraceListener>
            </sqlTraceListeners>
            <smtpTraceListeners>
                <smtpTraceListener name="smtpTraceListenerSettings"
                             host="vssmtp"
                             port="25"
                             from="[email protected]"
                             to="[email protected]"
                             subject="AdminService Logging Event: {EventType}, {MachineName}"
                             body="{Message}&#xA;=======&#xA;Process={ProcessId},&#xA;Thread={ThreadId},&#xA;ActivityId={ActivityId}"/>
            </smtpTraceListeners>
        </FRB.Diagnostics>
        <!-- System.Diagnostics logging section -->
        <system.diagnostics>
            <sources>
                <source name="FRB.EC.AdminService" switchValue="All">
                    <listeners>
                        <clear/>
                        <add name="ods"/>
                        <add name="smtp"/>
                        <add name="sql"/>
                    </listeners>
                </source>
                <source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
                    <listeners>
                        <add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
                    </listeners>
                </source>
            </sources>
            <sharedListeners>
                <!-- OutputDebugStringTraceListener -->
                <add name="ods"
               type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
               initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
                <!-- SqlTraceListener -->
                <add name="sql"
               type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
               initializeData="sqlTraceListenerSettings"
               traceOutputOptions="Timestamp"/>
                <!-- SmtpTraceListener -->
                <add name="smtp"
               type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
               initializeData="smtpTraceListenerSettings">
                       <filter type="System.Diagnostics.EventTypeFilter"
                       initializeData="Error"/>
                </add>
            </sharedListeners>
            <trace autoflush="true"/>
        </system.diagnostics>
        <system.web>
        <compilation debug="true" targetFramework="4.0">
        </compilation>
            <roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
        </system.web>
        <system.serviceModel>
            <services>
                <service name="FRB.EC.AdminService.AdminService"
                   behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
                    <!-- Service Endpoints -->
                    <endpoint address="" binding="wsHttpBinding"
                      bindingConfiguration="wsHttpEndpointBinding"
                      contract="FRB.EC.AdminService.IAdminService">
                        <!--
                  Upon deployment, the following identity element should be removed or replaced to reflect the
                  identity under which the deployed service runs. 
                  If removed, WCF will infer an appropriate identity automatically.
              -->
                        <identity>
                            <dns value="localhost"/>
                        </identity>
                    </endpoint>
                    <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
                </service>
            </services>
            <bindings>
                <wsHttpBinding>
                    <binding name="wsHttpEndpointBinding"
                     maxBufferPoolSize="2147483647"
                     maxReceivedMessageSize="500000000">
                        <readerQuotas maxDepth="2147483647"
                            maxStringContentLength="2147483647"
                            maxArrayLength="2147483647"
                            maxBytesPerRead="2147483647"
                            maxNameTableCharCount="2147483647"/>
                        <security>
                            <message clientCredentialType="Windows"/>
                        </security>
                    </binding>
                </wsHttpBinding>
            </bindings>
            <behaviors>
                <serviceBehaviors>
                    <behavior name="FRB.EC.AdminService.AdminServiceBehavior">
                        <!-- To avoid disclosing metadata information, set the value below to false and
                   remove the metadata endpoint above before deployment -->
                        <serviceMetadata httpGetEnabled="true"/>
                        <!-- To receive exception details in faults for debugging purposes, set the value below to true. 
                   Set to false before deployment to avoid disclosing exception information -->
                        <serviceDebug includeExceptionDetailInFaults="true"/>
                        <serviceCredentials>
                        </serviceCredentials>
                        <!--<serviceAuthorization principalPermissionMode="UseAspNetRoles"
                    roleProviderName="AspNetWindowsTokenRoleProvider"/>-->
                        <serviceAuthorization principalPermissionMode="UseWindowsGroups"
                                    impersonateCallerForAllOperations="true"/>
                    </behavior>
                    <behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
                        <!-- To avoid disclosing metadata information, set the value below to false and
                   remove the metadata endpoint above before deployment -->
                        <serviceMetadata httpGetEnabled="true"/>
                        <!-- To receive exception details in faults for debugging purposes, set the value below to true. 
                   Set to false before deployment to avoid disclosing exception information -->
                        <serviceDebug includeExceptionDetailInFaults="false"/>
                        <serviceCredentials>
                            <clientCertificate>
                                <authentication certificateValidationMode="PeerTrust"/>
                                <!--<authentication certificateValidationMode="Custom" customCertificateValidatorType="DataFactionServices.FRBX509CertificateValidator"/>-->
                            </clientCertificate>
                            <serviceCertificate findValue="WCfServer"
                                    storeLocation="LocalMachine"
                                    storeName="My" x509FindType="FindBySubjectName"/>
                        </serviceCredentials>
                    </behavior>
                </serviceBehaviors>
            </behaviors>
            <serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
        </system.serviceModel>
        <system.webServer>
            <modules runAllManagedModulesForAllRequests="true"/>
        </system.webServer>
    </configuration>
    Thanks for any help.
    Neal

    I think I found it... this is sure a strange error for what is really happening.
    Apparently it had happened to me before, and fortuantely, I actually added the following comment:
                // Above is related to the WCFLOG SQL Diagnostics Trace 
                // If you get error here an inner exception "requested registry access is not allowed"
                // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                // then make sure you have impersonation enabled in your client.
                // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
    Now I think I will do a try catch and spit out the same text.
    Still testing to assure that this really was the issue.
          <endpointBehaviors>
            <behavior name="FRB.AllowImpersonate ">
              <clientCredentials>
                <windows allowedImpersonationLevel="Impersonation"/>
              </clientCredentials>
            </behavior>
          </endpointBehaviors>
    The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
            <client>
                  <endpoint address="http://localhost:4998/AdminService.svc"
                                  behaviorConfiguration="FRB.AllowImpersonate"
                                  binding="wsHttpBinding"
                                  bindingConfiguration="WSHttpBinding_IAdminService"
                                 contract="svcRef.IAdminService"
                            name="WSHttpBinding_IAdminService">
                        <identity>
                              <dns value="localhost" />
                        </identity>
                  </endpoint>
            </client>
    Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
            public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
                try
                    _connection = new SqlConnection(connectionString);
                    // Above is related to the WCFLOG SQL Diagnostics Trace  
                    // If you get error here an inner exception "requested registry access is not allowed"
                    // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                    // then make sure you have impersonation enabled in your client.
                    // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
                catch (Exception ex)
                    if (ex.ToString().Contains("The type initializer for"))
                    throw new System.ApplicationException(@"
                    Your client app <endpoint> must be cofigured have a
                  'behaviorConfiguration' attribute like this:
                    behaviorConfiguration='FRB.AllowImpersonate'
                   that points back to a behavior that has this syntax:         
              <behavior name='FRB.AllowImpersonate'>
                 <clientCredentials>
                     <windows allowedImpersonationLevel='Impersonation'/>
                 </clientCredentials>
              </behavior>
              ", ex);
                   else
                        throw ex;
                _command = _connection.CreateCommand();
                _command.CommandText = commandText;
                _command.CommandType = commandType;
                // TODO _command.CommandTimeout = ;
    Neal

  • After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7) The window don't open or they are there  and only in an outline, kind of like they're behind the screen. I have also done a system update and then a syst

    After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
    The window don't open or they are there  and only in an outline, kind of like they're behind the screen.
    I have also done a system update and then a system reinstall.
    What now? incident nr, 526941222.

    After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
    The window don't open or they are there  and only in an outline, kind of like they're behind the screen.
    I have also done a system update and then a system reinstall.
    What now? incident nr, 526941222.

  • Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.

    Hi Friends,
          Request for the permission of type System.Data.SqlClient.SqlClientPermission  System.Data  Version 1.0.5000.0  Culture neutral  .This error is recieving when ever i tried to use the sql connection (with Visual
    studio C#)  in sharepoint portal installed application.
    Please help me if any answers for the issue.

    Hi,
    Open wss_mediumtrust.config & wss_minimaltrust.config. SharePoint 2013(C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\).
    Find in wss_mediumtrust.config:
    <SecurityClass
     Name="SqlClientPermission"
     Description="System.Data.SqlClient.SqlClientPermis sion, System.Data,
     Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
    Copy and paste it in to the <SecurityClasses> node of wss_minimaltrust.config.
    In the PermissionSet section of this configuration file, add the following:
    Find in wss_mediumtrust.config:
    <IPermission class="SqlClientPermission" version="1" Unrestricted="true"/>
    Copy and paste it in to the a <PermissionSet> node of wss_minimaltrust.config.
    Here is a similar thread for your reference:
    https://social.msdn.microsoft.com/Forums/en-US/a1c8f2bf-2575-40b4-87f1-4f98462b3234/request-for-the-permission-of-type-systemdatasqlclientsqlclientpermission-systemdata-version?forum=tfssetup
    Best Regards
    Dennis Guo
    TechNet Community Support

Maybe you are looking for

  • How to add an order number to each page of an adobe doc?

    I have a customer that is requiring us to add their order number to every page of multipage documents we send them.  Right now we're using typewriter and pasting the order number to each page individually.  Is there an easy way to automate this proce

  • Non standard permissions

    Hi this is the disk utility read out when i verify permission on my imac G5: Verify permissions for “Macintosh HD” Determining correct file permissions. Permissions differ on ./Applications/DVD Player.app/Contents/Resources/English.lproj/AboutBox.nib

  • Syncing itunes with more than one iphone

    How do I sync two iphones with itunes without over riding each others info. I synced my wifes new iphone on itunes and it put all my info on her phone. when i synced mine with another mac, it seemed to work fine but i lost all my music??? help

  • Problem Open links to fileshare when browse to SharePoint in chrome and firefox

    We have a search center site and results come from file share. It seems that when user use Chrome and firefox - there is a problem to open a link to the file. In addition in case the file is an image - the preview image is seen only in IE keren tsur

  • Business Catalyst failed to install: Failed to validate the license online

    When I try to install Business Catalyst, it show me this error:  "failed to install: Failed to validate the license online."