System date as Posting date in MM

Dear All,
Could it be possible to make system date as posting date for all transactions in MM ?
Is there any customizing settings or exits to do the above requirement ?
Regards,
S.Sridhar

by default SAP copies the system date to the posting date field, however the user can change this for very good reasons.
You can only restrict this by creating transaction variants or modifying the standard programs. But I am certain that you quickly face issues.
You should better try to educate your users om the importance of this field, and on the importance to post the documents on-time and not delayed on another day.
Example: you create a PO with delivery date April 30. your vendor delivers correctly on April 30. Your receiver does NOT post the GR on that day. NExt workingday is May 3rd. If user cannot change the posting date the GR is posted with May 3rd.
For vendor evaluation purposes your vendor is 3 days late and gets a bad ranking.
And I could tell you many many different reasons why it is necessary to be able to change the posting date.

Similar Messages

Posting date and System date

Hi SAP experts ,
I am troubleshooting one system and I am kind of getting lost ...
Let me explain the scenario:
Posting period set up
Posting date : 01-14-09
Sytem Date :01 -01-09
After checking all the information , I ran my period end closing .. I ran a comparison report between 12/31/2008 and 01/01/2009 .
My balance sheet matches with when I ran by posting date and my balance sheet is way off (especially retained earning )if ran by system date .
I can get the differnce in amount but was unable to track the exact transaction .Some of the adjustment have been done in this system using system date .
Any queries that will help me to track ? I have used this
SELECT
T0.TransId, T1.Account, T1.Taxdate, sum(T1.Debit-T1.Credit) Balance FROM OJDT T0 INNER JOIN JDT1 T1 ON T0.TransId = T1.TransId WHERE T0.TransType = 30 GROUP BY T0.TransId, T1.Account,T1.Taxdate
But not much of help to target easily ...
Any advise on this ...Should I consider if balance sheet is correct by posting date , it is fine ..
Thank you
Bishal
Edited by: BIshal Adhikari on Jul 28, 2009 3:52 PM

Hi Bishal,
I believe balance sheet by posting date is correct. System date is only kept for system to show the audit trail when you actually added the document.
Thanks,
Gordon

SYSTEM ERROR:NO Posted data for 5_CPR_EXTID 5(INCLUDE LCATS_ITSF 10)

Hello Experts,
CAN you please help me Regarding this error ,its very urjent for me.
The problem is we are not able to create timesheet through ESS CATW transaction. In the below the link to the ESS Create Time sheet CATW is giving. Use the link to enter the ESS timesheet. Ignore all columns and use only A/A column and give any leave type. When we enter the timesheet with A/A any vacation type and give number of hours and when we try to save or save and release button it gives a error message and it locks the user.
The error message it gives is :
<b>SYSTEM ERROR:NO Posted data for 5_CPR_EXTID 5(INCLUDE LCATS_ITSF 10)</b>
Please Help me ....
Thank you and regards,
Durga.K

Hi Durga,
We have exactly the same error. Were you able to fix this? Any help is appreciated.
Thanks,
Doug

MIR7 changing posting date to system date when period is closed

Dear Experts,
For FI park document, there is a setting in customising to set the posting date to system date during posting when the posting period in FI is closed. Is there a way to do this in LIV for MIR7 to set posting date to system date when the MM period is closed?
Amit

Hi,
Please, have a try to use the following BAdi:
MRM_HEADER_DEFAULT
Transaction CODES: MIRO, MIR7 and MIRA.
Detailed description of this BAdi can be found in IMG Help.
(SPRO -> Materials Management -> Logistics Invoice Verification -> Maintain Customer Exits and Business Add-Ins -> Maintain Business Add-Ins for Invoice Verification)
Hope it helps.
Regards,
w

System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10)

Dear experts!
I use internet service transaction catw in release 6.0 and the following error occurs:
System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10) .
Thank you in advance!
Vana Sounta

CATw is not supported in ECC 600 , You need to use new service of CATS, called record working time
Please read the note 870126 and also refer help.sap.com about record working time

System error: NO posted data for 8_CPR_EXTID 8 (Include LCATS_ITSF10)

Hi Exters
I am getting error like this System error: NO posted data for 8_CPR_EXTID 8 (Include LCATS_ITSF10) .Can anyone help me.
Thanks & Regards
Sandya

Hi !
I have the same error "System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10)".
How did you solve it?
Thank you in advance!
Vana Sounta

Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine. at System.Data.OleDb.OleDbServicesWrapper

HI
when i copy asp.net 3.5 application from IIS7 to IIS 8 in windows server 2012 and browse the application and try to save data in oracle , i get following error in Event viewer
Log Name: Application
Source: ASP.NET 4.0.30319.0
Date: 4/6/2015 2:53:21 PM
Event ID: 1309
Task Category: Web Event
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 17/06/36 02:53:21 ?
Event time (UTC): 17/06/36 11:53:21 ?
Event ID: 34f214e1dcdf45f5ad8450739c954494
Event sequence: 24
Event occurrence: 1
Event detail code: 0
Application information:
Process information:
Process ID: 18724
Process name: w3wp.exe
Account name: TEST\splaw
Exception information:
Exception type: InvalidOperationException
Exception message: The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine.
at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
Request URL: http://-----:50/executionreq/printLawsuit.aspx
Request path: /executionreq/printLawsuit.aspx
User host address: ---3.184
User:
Is authenticated: False
Authentication Type:
Thread account name: TEST\Spfarm
Thread information:
Thread ID: 16
Thread account name: TEST\Spfarm
Is impersonating: False
Stack trace: at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ASP.NET 4.0.30319.0" />
<EventID Qualifiers="32768">1309</EventID>
<Level>3</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-06T11:53:21.000000000Z" />
<EventRecordID>174735</EventRecordID>
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data>3005</Data>
<Data>An unhandled exception has occurred.</Data>
<Data>17/06/36 02:53:21 ?</Data>
<Data>17/06/36 11:53:21 ?</Data>
<Data>34f214e1dcdf45f5ad8450739c954494</Data>
<Data>24</Data>
<Data>1</Data>
<Data>0</Data>
<Data>/LM/W3SVC/3/ROOT/ExecutionReq-1-130727947211114471</Data>
<Data>Full</Data>
<Data>/ExecutionReq</Data>
<Data>C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\</Data>
<Data>TSHAREPINT2013</Data>
<Data>
</Data>
<Data>18724</Data>
<Data>w3wp.exe</Data>
<Data>TEST\splaw</Data>
<Data>InvalidOperationException</Data>
<Data>The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine.
at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
</Data>
<Data>http://----:50/executionreq/printLawsuit.aspx</Data>
<Data>/executionreq/printLawsuit.aspx</Data>
<Data>10.169.3.184</Data>
<Data>
</Data>
<Data>False</Data>
<Data>
</Data>
<Data>TEST\Spfarm</Data>
<Data>16</Data>
<Data>TEST\Spfarm</Data>
<Data>False</Data>
<Data> at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection,
</Data>
</EventData>
</Event>
adil

Hi,
As this question is more relate to iis, I suggest you post it to IIS Forum, you will get more help and confirmed answers from there.
http://forums.iis.net/
Best regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Config sync:error: Folder is no longer part of the system data source or the folder not found

This is the message I am getting when i try to configure synchronization through intellisync in all functions. Any ideas?
Folder is no longer part of the system data source or the folder not found
JT

jtwilcox wrote:
Mail account is MAPI
XP
Outlook 2007
thanks for your help so far!
JT
Hi...
Based upon the folder error, my guess is the Desktop Manager is having difficulty determining your default mail client. I am not sure why but it is easy enough to redo a profile in Outlook just to test this. (Control Panel / Mail)
Of course, I would backup my PST file prior to doing this and then create a new profile and import the PST file into the new profile. Once the profile is running and tested ok, I would again go to the Control Panel / Mail and set the default profile to point to the newly created profile. Then run the Desktop Manager and see what happens....
H.
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister

Folder is no longer part of the system data source....message

I just got a replacement phone due to a hardware issue with my old phone. I was able to transfer all the data from my old device to new device via blackberry desktop manager, however, I have been unable to get the synchronization to work properly. When I try to configure synchronization to use Outlook for Calendar & Address book etc. I get an error message when I click finish. The error message is a Runtime Error: Folder is no longer part o fthe data source, or the folder could not be found
I have tried downloading and reinstalling the software Blackberry Desktop Manager is 4.7.0.37 released March 2009
I have reviewed the solutions provided by blackberry & on this message board, but they do not make sense to me. One listing states to click on 'Intellisync' in desktop manager, which does not exist in the version I have. Another listing is referring to check the .PST on the device to see if data is in it, then create a new MAPI folder. I have not been able to figure out how to do either of these tasks.
I run Outlook 2007 on a Windows Vista PC
Please help....

Here is the KB that addresses the error message you state:
KB15812 Runtime error - folder is no longer part of system data source or data could not be found
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed

SharePoint 2010 -
I have created a console utility that further calls the stsadm.exe to Export sites from one site collection in a DB to another site collection in another DB of the same web application.
Export works fine. But during Import, I get the following errors
[ListItem] [Admin] Progress: Importing
[ListItem] [Admin]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Hol plans.xls] Progress: Importing
[ListItem] [Hol plans.xls]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Time.doc] Progress: Importing
[ListItem] [Time.doc]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [AP Docs] Progress: Importing
[ListItem] [AP Docs]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf] Progress: Importing
[ListItem] [Update - June 27th.pdf]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
FatalError: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Progress: Import did not complete.
1. Does the console application treated as a Sandbox Solution?
2. Do I need to configure CAS policy in wss_usercode.config? and what?
3. What else could be configured to make this work?
I have tried adding the following in wss_custom_minimaltrust.config but no avail.
<SecurityClass Name="SqlClientPermission" Description="System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
and
<PermissionSet
                    class="NamedPermissionSet"
                    version="1"
                    Name="SPRestricted">
<IPermission
                      class="SqlClientPermission"
                      version="1"
                      Unrestricted="true"
                            />

</PermissionSet>
UPDATE: It has been observed that the issue is intermittent. That is, sometimes the import works fine (event without any configuration of SqlClientPermission in any config file) but sometimes it gives the above error. I'm stuck!
Regards, Amit Gupta

Hi,
According to your post, my understanding is that you get Error “Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed
Simple solution is to change the trust the trust level to FULL: <trust   level="[Full]"    originUrl="URL" />
In addition, you can modify the wss_mediumtrust.config and wss_minimaltrust.config file under the path “C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG”.
For more information, you can refer to:
http://blogs.msdn.com/b/navdeepm/archive/2010/02/19/system-security-securityexception-request-for-the-permission-of-type-system-data-sqlclient-sqlclientpermission-system-data-version-2-0-0-0-culture-neutral-publickeytoken-b77a5c561934e089-failed.aspx
http://www.fewlines4biju.com/2011/01/request-for-permission-of-type_18.html
http://techsolutions-at-desk.blogspot.com/2011/08/request-for-permission-of-type.html
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. InnerException: Requested registry access is not allowed.

I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
   at System.Data.SqlClient.SqlConnection..ctor()
   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
   at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
   at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
   at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceInformation(String message)
   at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
   at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
   at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
      at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
   at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
   at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
   at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
   at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
    <behaviors>
      <serviceBehaviors>
        <behavior name="ServiceBehavior">
          <serviceMetadata httpGetEnabled="true"/>
          <serviceDebug includeExceptionDetailInFaults="false"/>
          <serviceAuthorization impersonateCallerForAllOperations="true"/>
        </behavior>
      </serviceBehaviors>
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
    </behaviors>
    <bindings>
      <wsHttpBinding>
        <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
          openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
          bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
          maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
          messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
          allowCookies="false">
          <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
            maxBytesPerRead="4096" maxNameTableCharCount="16384" />
          <reliableSession ordered="true" inactivityTimeout="00:10:00"
            enabled="false" />
          <security mode="Message">
            <transport clientCredentialType="Windows" proxyCredentialType="None"
              realm="" />
            <message clientCredentialType="Windows" negotiateServiceCredential="true"
              algorithmSuite="Default" />
          </security>
        </binding>
      </wsHttpBinding>
    </bindings>
        <client>
              <endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
                    bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
                    name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
    </system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
    <configSections>
    <section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
    <appSettings>
       
    </appSettings>
    
<connectionStrings>
    <add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
    
    <FRB.Diagnostics>
        <sqlTraceListeners>
            <sqlTraceListener name="sqlTraceListenerSettings"
                        connectionStringName="log"
                        commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
                        commandType="Text">
                <parameters>
                    <parameter name="@Source" propertyToken="{Source}"/>
                    <parameter name="@ActivityId" propertyToken="{ActivityId}"/>
                    <parameter name="@ProcessId" propertyToken="{ProcessId}"/>
                    <parameter name="@ThreadId" propertyToken="{ThreadId}"/>
                    <parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
                    <parameter name="@Message" propertyToken="{Message}"/>
                    <parameter name="@Timestamp" propertyToken="{DateTime}"/>
          
        </parameters>
            </sqlTraceListener>
        </sqlTraceListeners>
        <smtpTraceListeners>
            <smtpTraceListener name="smtpTraceListenerSettings"
                         host="vssmtp"
                         port="25"
                         from="[email protected]"
                         to="[email protected]"
                         subject="AdminService Logging Event: {EventType}, {MachineName}"
                         body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
        </smtpTraceListeners>
    </FRB.Diagnostics>
    
    <system.diagnostics>
        <sources>
            <source name="FRB.EC.AdminService" switchValue="All">
                <listeners>
                    <clear/>
                    <add name="ods"/>
                    <add name="smtp"/>
                    <add name="sql"/>
                </listeners>
            </source>
            <source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
                <listeners>
                    <add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
                </listeners>
            </source>
        </sources>
        <sharedListeners>
            
            <add name="ods"
           type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
           initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
            
            <add name="sql"
           type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
           initializeData="sqlTraceListenerSettings"
           traceOutputOptions="Timestamp"/>
            
            <add name="smtp"
           type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
           initializeData="smtpTraceListenerSettings">
                   <filter type="System.Diagnostics.EventTypeFilter"
                   initializeData="Error"/>
            </add>
        </sharedListeners>
        <trace autoflush="true"/>
    </system.diagnostics>
    <system.web>
    <compilation debug="true" targetFramework="4.0">
    </compilation>
        <roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
    </system.web>
    <system.serviceModel>
        <services>
            <service name="FRB.EC.AdminService.AdminService"
               behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
                
                <endpoint address="" binding="wsHttpBinding"
                  bindingConfiguration="wsHttpEndpointBinding"
                  contract="FRB.EC.AdminService.IAdminService">
                    
                    <identity>
                        <dns value="localhost"/>
                    </identity>
                </endpoint>
                <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
            </service>
        </services>
        <bindings>
            <wsHttpBinding>
                <binding name="wsHttpEndpointBinding"
                 maxBufferPoolSize="2147483647"
                 maxReceivedMessageSize="500000000">
                    <readerQuotas maxDepth="2147483647"
                        maxStringContentLength="2147483647"
                        maxArrayLength="2147483647"
                        maxBytesPerRead="2147483647"
                        maxNameTableCharCount="2147483647"/>
                    <security>
                        <message clientCredentialType="Windows"/>
                    </security>
                </binding>
            </wsHttpBinding>
        </bindings>
        <behaviors>
            <serviceBehaviors>
                <behavior name="FRB.EC.AdminService.AdminServiceBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="true"/>
                    <serviceCredentials>
                    </serviceCredentials>
                    
                    <serviceAuthorization principalPermissionMode="UseWindowsGroups"
                                impersonateCallerForAllOperations="true"/>
                </behavior>
                <behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="false"/>
                    <serviceCredentials>
                        <clientCertificate>
                            <authentication certificateValidationMode="PeerTrust"/>
                            
                        </clientCertificate>
                        <serviceCertificate findValue="WCfServer"
                                storeLocation="LocalMachine"
                                storeName="My" x509FindType="FindBySubjectName"/>
                    </serviceCredentials>
                </behavior>
            </serviceBehaviors>
        </behaviors>
        <serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
    </system.serviceModel>
    <system.webServer>
        <modules runAllManagedModulesForAllRequests="true"/>
    </system.webServer>
</configuration>
Thanks for any help.
Neal

I think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
            // Above is related to the WCFLOG SQL Diagnostics Trace
            // If you get error here an inner exception "requested registry access is not allowed"
            // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
            // then make sure you have impersonation enabled in your client.
            // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate ">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
        <client>
              <endpoint address="http://localhost:4998/AdminService.svc"
                              behaviorConfiguration="FRB.AllowImpersonate"
                              binding="wsHttpBinding"
                          bindingConfiguration="WSHttpBinding_IAdminService"
                             contract="svcRef.IAdminService"
                        name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
        public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
            try
                _connection = new SqlConnection(connectionString);
                // Above is related to the WCFLOG SQL Diagnostics Trace
                // If you get error here an inner exception "requested registry access is not allowed"
                // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                // then make sure you have impersonation enabled in your client.
                // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
            catch (Exception ex)
                if (ex.ToString().Contains("The type initializer for"))
                throw new System.ApplicationException(@"
                Your client app <endpoint> must be cofigured have a
              'behaviorConfiguration' attribute like this:
                behaviorConfiguration='FRB.AllowImpersonate'
               that points back to a behavior that has this syntax:
          <behavior name='FRB.AllowImpersonate'>
             <clientCredentials>
                 <windows allowedImpersonationLevel='Impersonation'/>
             </clientCredentials>
          </behavior>
          ", ex);
               else
                    throw ex;
            _command = _connection.CreateCommand();
            _command.CommandText = commandText;
            _command.CommandType = commandType;
            // TODO _command.CommandTimeout = ;
Neal

How to save user name and system date in a table

I have a form that allow users to enter some information...
I want to save user name in one of the columns and system date in another column by default when the user submit the form to save data...
Please advice...
Thanks

Hi talbo,
The most reliable method is to use a before-insert trigger on your table. This way the columns will be set properly no matter how rows are inserted (via your app or any other means). Given your user name column is called "CREATE_USER" and your date column is called "CREATE_DATE" for example - include these lines in a before-insert trigger:
:NEW.CREATE_USER := NVL(V('APP_USER'), USER);
SELECT SYSDATE INTO :NEW.CREATE_DATE FROM DUAL;The NVL(V('APP_USER'), USER) will set CREATE_USER to the current ApEx application user if the row is created from within the application, or to the current database user if the row is created outside the application.
Hope this helps,
John
If you find this information useful, please remember to mark the post "helpful" or "correct" so that others may benefit as well.

System.Data.SqlServerCe.SqlCeException (0x80004005): Native components of SQL Server Compact engine are not loaded. Please reinstall Microsoft SQL Server Compact.

Hi
I have followed http://technet.microsoft.com/en-us/library/ms173298(v=sql.110).aspx to support private deployment for my application in anycpu mode.
Though its working fine on several XP and Windows 7 , on on particular XP machine , I get this
System.Data.SqlServerCe.SqlCeException (0x80004005): Native components of SQL Server Compact engine are not loaded. Please reinstall Microsoft SQL Server Compact.
   at System.Data.SqlServerCe.NativeMethods.ThrowIfNativeLibraryNotLoaded()
   at System.Data.SqlServerCe.SqlCeEngine.Dispose(Boolean disposing)
   at System.Data.SqlServerCe.SqlCeEngine.Finalize()
Can anybody give me directions on this?

Do you use LINQ to SQL or EF or ADO.NET, is what
Yes, I would start by investigating:
- Do you REALLY need "any CPU", or can you cope with just x86 to make things simpler (See my LINQ to SQL blog post)
- Is SQL Server Compact installed on this PC, and which build (is it same or different from the one you distribute)
- Use Process Explorer from sysinternals on the machine to find out where the app tries to load the native libraries from (and fails)
Please mark as answer, if this was it. Visit my SQL Server Compact blog http://erikej.blogspot.com

Display the system date automatically in the parameter at runtime

Post Author: sandeepsanadi
CA Forum: Crystal Reports
Hi,
While running a report, I want to display the current system date as a default date in the "From Date" parameter, without selecting the current date from the calendar.
Please let me know if someone knows how to get this.
Thanks in anticipation.
Sandeep

Post Author: sandeepsanadi
CA Forum: Crystal Reports
No.... This does not work. We had tried this before putting our question on the forum, but does not work.

Error-System Type Initialization Exception occured in system data dll

hello sir,
because of transferring my project from one pc to another pc i am getting following error:
error massage:
first chance exception of type 'System.TypeInitializationException' occurred in System.Data.dll
Additional information: The type initializer for 'System.Data.Common.DbConnectionOptions' threw an exception.
If there is a handler for this exception, the program may be safely continued.
also attached image of error massage
so how to by pass this error
please help,
regards,
kavi-kalash

Hello,
>>because of transferring my project from one pc to another pc i am getting following error:
This seems to be related with an environment issue, please have a check the worked machine and the non-worked one, to compare if there are some difference.
>>If there is a handler for this exception, the program may be safely continued.
This could be due to missing references. Or it could be due to an error in the app config file. Is it possible for you to post your code about the connect part and the connection string? And here is an article describes how to process the first chance exception:
https://msdn.microsoft.com/en-us/library/dd997368(v=vs.110).aspx
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

System date as Posting date in MM

Similar Messages

Maybe you are looking for