System Debugging Stopped Working

Hi Gurus,
From last few days suddenly system debugging has stopped working. When I put it on It gives the message 'System Debugging switched on' but it just doesn't wait & post the document. I have checked with the Basis guy & he confirms there is no change from his side ( Of course I am not convinced about it & strongly believe that something has changed in the syatem ). Can somebody guide me on this.
Regards
Raju Chitale

Hi Raju, have you checked your personal settings within the editor (utilities->settings->debugging)?  It could be that you have external debugging active.  Prior to ECC5.0 I believe you had to toggle between external and internal debugging.  So if you inadvertently switched it to external it won't break within your sap gui sessions until you switch it back to internal.
Kevin

Similar Messages

  • Satellite 1130-Z24,system has stopped working altogether

    Hi
    My system has stopped working altogether, since it was dropped, only from a small distance though. When connected to AC power, the light work, so I suspect power is getting to it, and I suspect I have damaged either the motherboard or power supply, but I am hoping something simple. Has anybody any manuals showing how to dismantle the satellite 1130, or any other suggestions.
    Kind Rgrds
    Chris

    Hello Chris
    Unfortunately there is no official document how to disassemble/assemble your Satellite. In my opinion the best solution is to contact service partner in your country.
    I am pretty sure that they can help you. Who knows which hardware part is damaged.
    Good luck!

  • I keep getting an error message "spooler Sub System App stopped working and was closed"

    hp photosmart c3150 all-in-one
    windows vista 32-bit
     "spooler Sub System App stopped working and was closed"
    not sure of any changes. I did reinstall the printer 3 times

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Sub system spooler stopped working

    Hi Forum,
    I have this message when I try to print. I use Vista Home premium service pack1. I print with HP psc1210 and primoPDF.
    It offers to install a printer but then no, it says there is a pb with the spooler.
    PLease help
    pier

    Some more precisions :
    It stopped working again.
    So I reinstalled / repaired Word 97 with its CD.
    All is OK now.
    If it helps...
    Pier

  • Downloaded Operating System - Apps Stopped Working

    Hello,
    On advice from a friend, I recently downloaded the latest iPhone 3G operating system software. Now most of my applications don't work. They just blink black and then return to the iPhone icons. The iTunes store says that my applications are up-to-date. What's the deal-e-o?
    Dale MF

    what have you done to troubleshoot thus far?

  • Synergy between two Arch systems. Stops working randomly. [SOLVED]

    I have two PCs connected with a crossover ethernet cable. I use synergy to control them both (a laptop with two screens, a desktop with one screen).
    I use Arch on my laptop and connect the mouse and keyboard to it. I start Synergy on the laptop by starting the daemon (/etc/rc.d/synergys start). When I boot Windows on the desktop, Synergy works just fine. If I use QuickSynergy on the desktop with Arch, the connection will start to randomly cut out. Sometimes after only putting the mouse to the desktop screen once, sometimes after a few minutes of use.
    The only way to start it up again is to click Stop and Start on QuickSynergy. It won't usually last very long though before it cuts again.
    I figured that an update may have caused the problem, so I've been waiting to see if it would get fixed, but it hasn't so far.
    Any other ideas?
    Last edited by themusicalduck (2012-01-18 02:29:36)

    I only know of https://bugs.archlinux.org/task/26992 . Have you checked upstream? (a bit silly question because I wouldn't really know how to describe this issue)

  • Labview 10.0.1 development system has stopped working

    I am getting this cryptic message when trying to build an EXE in windows 7. 
    It happens right at the end of the build process when the application builder message says "saving main.vi"  where "Main.vi" is the primary.
    It forces labVIEW to close.
    Anyone have any experience troubleshooting an error like this?
    Thanks -

    I am experiencing the same issue.  I am no longer able to build the Host exe (i.e. an exe under the My Computer target) for a certain project.  I am able to build the RT exe under 2 different cFP-2220 targets in the same project.  I am also able to build the Host exe in different, but very similar projects.  I can also build the exe from this exact same project on different computers that have the same installation of labview.  Creating a new project allowed me to build the host when only the host part was in the project - when I added the RT target, it failed.  Cleaning the old build and trying again (and again..) does not help.
    I was using LabVIEW 2011 SP1, but I just upgraded to the f2 patch (which did not help).  Here are the series of error messages I get:
    Step 1 try to build the exe, it gets almost to the end and then freezes up:
    Clicking degug gives:
    Debug...
    Ok...
    jeffneuner - did you ever find a solution?
    Does anyone have any other suggestions for debugging or getting this to work?
    I don't have any experience using the LabWindows/CVI debugger, maybe there is something I can do with this?
    Thanks!
    Lauren

  • I get message "Spooler Sub System APP stopped working and was closed

    Print spooler not working and was closed

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • LabVIEW 11.0 Development System has stopped working (happens every time I close manually)

    Perhaps this issue is related to my computer only?
    Does anyone else experience this when the manually close labview's "getting started" window?
    All I have to do is open labview then close the window... everytime.
    Here is the data dump from the crash alert window:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: LabVIEW.exe
    Application Version: 11.0.0.4029
    Application Timestamp: 4e0213b5
    Fault Module Name: RpcRtRemote.dll
    Fault Module Version: 6.1.7601.17514
    Fault Module Timestamp: 4ce7992f
    Exception Code: 80000003
    Exception Offset: 00006369
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    I'm using win7 x64
    Thanks
    -pat

    I have not seen that problem before.  But I would try to reinstall/repair LabVIEW via the control panel->programs and features.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • System sound (like when empty trash) miserably stop working in Lion 10.7.2

    I have upgraded to Lion10.7.2 on my Macbook Pro early 2008 Intel 15 inches, and the update went fine except one annoying problem I found so far.
    This problem also occurred in 10.7.0 and 10.7.1 and it seems that no fix has been made in 10.7.2
    The problem is when I drag file to Trash and empty it, there should be trash empty sound effect, and this has been with us since Tiger.
    In 10.7.2 it work as expected, but when I close the lid to get it to sleep, once I open the lid, the system sound is gone without no reason.
    When I play music from iTunes, or when I change volume level, the sound effects work as usual, but empty trash sound stop working miserable.
    I have to shut down, press Option-Command-P-R and power on to reset PRAM then system sound like empty trash come back. Again, afpr may be half a day, it's gone again
    Any friend here has solution for this? The com.apple.soundprefs.plist file, if you delete it, in Lion, it is not recreated again, and it's gone forever. SO delete plist file is not a solution.
    Help please

    I found a workaround to my problem accidentally.
    As the system sound like empty trash or file drag sound stop working miserably, after close the MBP lid to sleep, after it awake, system sound just stop working.
    Before this, I have to shut down my MBP, reset PRAM by press Option-Control-P-R and power on, to get the system sound back
    But I found that the workaround whenever the system sound stop working thad do not require reboot is:
    1. Go to System Preference-Sound
    2. Change Play sound effects through: Internal Speakers to Soundflower 2ch) in the drop down list.
        (Soundflower has been installed by a software called iShowU HD (screen capturing software))
    3. Slide to change Alert Volume from the original position
    4. Switch back to Internal Speakers from Soundflower 92ch) in the drop down list
    5. Change Alert Volume by moving slide bar back to the desirable position
    Immediately, the sound effects that stop working will start working again.
    This just work for my case. I don't know it will work for ther people that have the same problem as me or not.
    And if possible, can some expert here give me explanation why doing the above make system sound effect to work again? mI want to know the cause, and definite solution to the problem
    Advise and suggestion please. Thank in advance

  • DFS replication stopped working and cannot be debugged because WMI repository cannot be accessed

    Hello,
    two days ago our DFS replication suddendly stopped working sometime around midnight local time. At least this is what our second domain controller is reporting. Event log is flooded with event id 5002 from DFSR. It is unclear what caused this sudden problem
    and even worse, how to solve it. First thing I tried was to perform propagation tests. According to propagation report none of them was successful. Creating an integrity report brought me to another problem: It fails with two errors. First it is unable to
    connect to the other DC. Second it is unable to access local WMI repository. This is true for both machines.
    First I tried to find information on possible problems with WMI. WMIdiag provided a lot of information. However, opinions I found on the net largely disagree whether output from WMIdiag is useful or not. Yet I tried to re-compile .mof files and rebuild the
    repository. So far, nothing changed. This is my output from WMIdiag:
    34309 13:02:46 (0) ** WMIDiag v2.1 started on Donnerstag, 22. Mai 2014 at 12:49.
    34310 13:02:46 (0) **
    34311 13:02:46 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
    34312 13:02:46 (0) **
    34313 13:02:46 (0) ** This script is not supported under any Microsoft standard support program or service.
    34314 13:02:46 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
    34315 13:02:46 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
    34316 13:02:46 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
    34317 13:02:46 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
    34318 13:02:46 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
    34319 13:02:46 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
    34320 13:02:46 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
    34321 13:02:46 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
    34322 13:02:46 (0) ** of the possibility of such damages.
    34323 13:02:46 (0) **
    34324 13:02:46 (0) **
    34325 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34326 13:02:46 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
    34327 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34328 13:02:46 (0) **
    34329 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34330 13:02:46 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'COM\ABCDEF' on computer 'DC2'.
    34331 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34332 13:02:46 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
    34333 13:02:46 (0) ** INFO: => 1 possible incorrect shutdown(s) detected on:
    34334 13:02:46 (0) ** - Shutdown on 01 April 2014 10:20:54 (GMT-0).
    34335 13:02:46 (0) **
    34336 13:02:46 (0) ** System drive: ....................................................................................................... C: (Datenträgernr. 0 Partitionsnr. 1).
    34337 13:02:46 (0) ** Drive type: ......................................................................................................... SCSI (Adaptec Array SCSI Disk Device).
    34338 13:02:46 (0) ** There are no missing WMI system files: .............................................................................. OK.
    34339 13:02:46 (0) ** There are no missing WMI repository files: .......................................................................... OK.
    34340 13:02:46 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
    34341 13:02:46 (0) ** AFTER running WMIDiag:
    34342 13:02:46 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
    34343 13:02:46 (0) ** - Disk free space on 'C:': .......................................................................................... 10665 MB.
    34344 13:02:46 (0) ** - INDEX.BTR, 4276224 bytes, 22.05.2014 12:52:30
    34345 13:02:46 (0) ** - MAPPING1.MAP, 67248 bytes, 22.05.2014 12:52:30
    34346 13:02:46 (0) ** - MAPPING2.MAP, 67168 bytes, 22.05.2014 12:48:33
    34347 13:02:46 (0) ** - OBJECTS.DATA, 23126016 bytes, 22.05.2014 12:52:30
    34348 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34349 13:02:46 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
    34350 13:02:46 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
    34351 13:02:46 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
    34352 13:02:46 (0) ** => This will prevent any WMI remote connectivity to this computer except
    34353 13:02:46 (0) ** if the following three inbound rules are ENABLED and non-BLOCKING:
    34354 13:02:46 (0) ** - 'Windows Management Instrumentation (DCOM-In)'
    34355 13:02:46 (0) ** - 'Windows Management Instrumentation (WMI-In)'
    34356 13:02:46 (0) ** - 'Windows Management Instrumentation (ASync-In)'
    34357 13:02:46 (0) ** Verify the reported status for each of these three inbound rules below.
    34358 13:02:46 (0) **
    34359 13:02:46 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' group rule: ............................................. DISABLED.
    34360 13:02:46 (0) ** => This will prevent any WMI remote connectivity to/from this machine.
    34361 13:02:46 (0) ** - You can adjust the configuration by executing the following command:
    34362 13:02:46 (0) ** i.e. 'NETSH.EXE ADVFIREWALL FIREWALL SET RULE GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
    34363 13:02:46 (0) ** Note: With this command all inbound and outbound WMI rules are activated at once!
    34364 13:02:46 (0) ** You can also enable each individual rule instead of activating the group rule.
    34365 13:02:46 (0) **
    34366 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34367 13:02:46 (0) ** DCOM Status: ........................................................................................................ OK.
    34368 13:02:46 (0) ** WMI registry setup: ................................................................................................. OK.
    34369 13:02:46 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
    34370 13:02:46 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
    34371 13:02:46 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
    34372 13:02:46 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
    34373 13:02:46 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
    34374 13:02:46 (0) ** this can prevent the service/application to work as expected.
    34375 13:02:46 (0) **
    34376 13:02:46 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
    34377 13:02:46 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
    34378 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34379 13:02:46 (0) ** WMI service DCOM setup: ............................................................................................. OK.
    34380 13:02:46 (0) ** WMI components DCOM registrations: .................................................................................. OK.
    34381 13:02:46 (0) ** WMI ProgID registrations: ........................................................................................... OK.
    34382 13:02:46 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
    34383 13:02:46 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
    34384 13:02:46 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
    34385 13:02:46 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 1 WARNING(S)!
    34386 13:02:46 (0) ** - ROOT/MICROSOFTACTIVEDIRECTORY, ReplProv1, replprov.dll
    34387 13:02:46 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
    34388 13:02:46 (0) ** This can be due to:
    34389 13:02:46 (0) ** - the de-installation of the software.
    34390 13:02:46 (0) ** - the deletion of some files.
    34391 13:02:46 (0) ** => If the software has been de-installed intentionally, then this information must be
    34392 13:02:46 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
    34393 13:02:46 (0) ** the provider registration data.
    34394 13:02:46 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\MICROSOFTACTIVEDIRECTORY path __Win32Provider Where Name='ReplProv1' DELETE'
    34395 13:02:46 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
    34396 13:02:46 (0) ** You can retrieve the missing file from:
    34397 13:02:46 (0) ** - A backup.
    34398 13:02:46 (0) ** - The Windows CD.
    34399 13:02:46 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
    34400 13:02:46 (0) ** - The original CD or software package installing this WMI provider.
    34401 13:02:46 (0) **
    34402 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34403 13:02:46 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
    34404 13:02:46 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
    34405 13:02:46 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
    34406 13:02:46 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
    34407 13:02:46 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
    34408 13:02:46 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
    34409 13:02:46 (0) **
    34410 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
    34411 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\ANONYMOUS LOGON' has been REMOVED!
    34412 13:02:46 (0) ** - REMOVED ACE:
    34413 13:02:46 (0) ** ACEType: &h0
    34414 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34415 13:02:46 (0) ** ACEFlags: &h0
    34416 13:02:46 (0) ** ACEMask: &h7
    34417 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34418 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
    34419 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
    34420 13:02:46 (0) **
    34421 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34422 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34423 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34424 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34425 13:02:46 (0) **
    34426 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
    34427 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
    34428 13:02:46 (0) ** - REMOVED ACE:
    34429 13:02:46 (0) ** ACEType: &h0
    34430 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34431 13:02:46 (0) ** ACEFlags: &h0
    34432 13:02:46 (0) ** ACEMask: &h7
    34433 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34434 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
    34435 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
    34436 13:02:46 (0) **
    34437 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34438 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34439 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34440 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34441 13:02:46 (0) **
    34442 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
    34443 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
    34444 13:02:46 (0) ** - REMOVED ACE:
    34445 13:02:46 (0) ** ACEType: &h0
    34446 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34447 13:02:46 (0) ** ACEFlags: &h0
    34448 13:02:46 (0) ** ACEMask: &h7
    34449 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34450 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
    34451 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
    34452 13:02:46 (0) **
    34453 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34454 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34455 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34456 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34457 13:02:46 (0) **
    34458 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
    34459 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
    34460 13:02:46 (0) ** - REMOVED ACE:
    34461 13:02:46 (0) ** ACEType: &h0
    34462 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34463 13:02:46 (0) ** ACEFlags: &h0
    34464 13:02:46 (0) ** ACEMask: &h1F
    34465 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34466 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34467 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34468 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34469 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34470 13:02:46 (0) **
    34471 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34472 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34473 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34474 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34475 13:02:46 (0) **
    34476 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
    34477 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
    34478 13:02:46 (0) ** - REMOVED ACE:
    34479 13:02:46 (0) ** ACEType: &h0
    34480 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34481 13:02:46 (0) ** ACEFlags: &h0
    34482 13:02:46 (0) ** ACEMask: &h1F
    34483 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34484 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34485 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34486 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34487 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34488 13:02:46 (0) **
    34489 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34490 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34491 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34492 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34493 13:02:46 (0) **
    34494 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
    34495 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
    34496 13:02:46 (0) ** - REMOVED ACE:
    34497 13:02:46 (0) ** ACEType: &h0
    34498 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34499 13:02:46 (0) ** ACEFlags: &h0
    34500 13:02:46 (0) ** ACEMask: &h1F
    34501 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34502 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34503 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34504 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34505 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34506 13:02:46 (0) **
    34507 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34508 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34509 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34510 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34511 13:02:46 (0) **
    34512 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
    34513 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
    34514 13:02:46 (0) ** - REMOVED ACE:
    34515 13:02:46 (0) ** ACEType: &h0
    34516 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34517 13:02:46 (0) ** ACEFlags: &h0
    34518 13:02:46 (0) ** ACEMask: &h1F
    34519 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34520 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34521 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34522 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34523 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34524 13:02:46 (0) **
    34525 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34526 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34527 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34528 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34529 13:02:46 (0) **
    34530 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
    34531 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
    34532 13:02:46 (0) ** - REMOVED ACE:
    34533 13:02:46 (0) ** ACEType: &h0
    34534 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34535 13:02:46 (0) ** ACEFlags: &h0
    34536 13:02:46 (0) ** ACEMask: &h1F
    34537 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34538 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34539 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34540 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34541 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34542 13:02:46 (0) **
    34543 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34544 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34545 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34546 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34547 13:02:46 (0) **
    34548 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
    34549 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
    34550 13:02:46 (0) ** - REMOVED ACE:
    34551 13:02:46 (0) ** ACEType: &h0
    34552 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34553 13:02:46 (0) ** ACEFlags: &h0
    34554 13:02:46 (0) ** ACEMask: &hB
    34555 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34556 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34557 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34558 13:02:46 (0) **
    34559 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34560 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34561 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34562 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34563 13:02:46 (0) **
    34564 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34565 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
    34566 13:02:46 (0) ** - REMOVED ACE:
    34567 13:02:46 (0) ** ACEType: &h0
    34568 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34569 13:02:46 (0) ** ACEFlags: &h0
    34570 13:02:46 (0) ** ACEMask: &h1F
    34571 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34572 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34573 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34574 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34575 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34576 13:02:46 (0) **
    34577 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34578 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34579 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34580 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34581 13:02:46 (0) **
    34582 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34583 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
    34584 13:02:46 (0) ** - REMOVED ACE:
    34585 13:02:46 (0) ** ACEType: &h0
    34586 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34587 13:02:46 (0) ** ACEFlags: &h0
    34588 13:02:46 (0) ** ACEMask: &h1F
    34589 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34590 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34591 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34592 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34593 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34594 13:02:46 (0) **
    34595 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34596 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34597 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34598 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34599 13:02:46 (0) **
    34600 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34601 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
    34602 13:02:46 (0) ** - REMOVED ACE:
    34603 13:02:46 (0) ** ACEType: &h0
    34604 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34605 13:02:46 (0) ** ACEFlags: &h0
    34606 13:02:46 (0) ** ACEMask: &h1F
    34607 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34608 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34609 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34610 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34611 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34612 13:02:46 (0) **
    34613 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34614 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34615 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34616 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34617 13:02:46 (0) **
    34618 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34619 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\NETWORK SERVICE' has been REMOVED!
    34620 13:02:46 (0) ** - REMOVED ACE:
    34621 13:02:46 (0) ** ACEType: &h0
    34622 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34623 13:02:46 (0) ** ACEFlags: &h0
    34624 13:02:46 (0) ** ACEMask: &h1F
    34625 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34626 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34627 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34628 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34629 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34630 13:02:46 (0) **
    34631 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34632 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34633 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34634 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34635 13:02:46 (0) **
    34636 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34637 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\LOCAL SERVICE' has been REMOVED!
    34638 13:02:46 (0) ** - REMOVED ACE:
    34639 13:02:46 (0) ** ACEType: &h0
    34640 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34641 13:02:46 (0) ** ACEFlags: &h0
    34642 13:02:46 (0) ** ACEMask: &h1F
    34643 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34644 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34645 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34646 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34647 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34648 13:02:46 (0) **
    34649 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34650 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34651 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34652 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34653 13:02:46 (0) **
    34654 13:02:46 (0) **
    34655 13:02:46 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
    34656 13:02:46 (0) ** DCOM security error(s) detected: .................................................................................... 14.
    34657 13:02:46 (0) ** WMI security warning(s) detected: ................................................................................... 0.
    34658 13:02:46 (0) ** WMI security error(s) detected: ..................................................................................... 0.
    34659 13:02:46 (0) **
    34660 13:02:46 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
    34661 13:02:46 (0) ** Overall WMI security status: ........................................................................................ OK.
    34662 13:02:46 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
    34663 13:02:46 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 1.
    34664 13:02:46 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
    34665 13:02:46 (0) ** 'select * from MSFT_SCMEventLogEvent'
    34666 13:02:46 (0) **
    34667 13:02:46 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
    34668 13:02:46 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
    34669 13:02:46 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
    34670 13:02:46 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
    34671 13:02:46 (0) ** - ROOT/SERVICEMODEL.
    34672 13:02:46 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
    34673 13:02:46 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
    34674 13:02:46 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
    34675 13:02:46 (0) ** i.e. 'WMIC.EXE /NODE:"ISWDC2" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
    34676 13:02:46 (0) **
    34677 13:02:46 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
    34678 13:02:46 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
    34679 13:02:46 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 32 ERROR(S)!
    34680 13:02:46 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34681 13:02:46 (0) ** MOF Registration: ''
    34682 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34683 13:02:46 (0) ** MOF Registration: ''
    34684 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34685 13:02:46 (0) ** MOF Registration: ''
    34686 13:02:46 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34687 13:02:46 (0) ** MOF Registration: ''
    34688 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34689 13:02:46 (0) ** MOF Registration: ''
    34690 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34691 13:02:46 (0) ** MOF Registration: ''
    34692 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34693 13:02:46 (0) ** MOF Registration: ''
    34694 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34695 13:02:46 (0) ** MOF Registration: ''
    34696 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34697 13:02:46 (0) ** MOF Registration: ''
    34698 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34699 13:02:46 (0) ** MOF Registration: ''
    34700 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34701 13:02:46 (0) ** MOF Registration: ''
    34702 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34703 13:02:46 (0) ** MOF Registration: ''
    34704 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34705 13:02:46 (0) ** MOF Registration: ''
    34706 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34707 13:02:46 (0) ** MOF Registration: ''
    34708 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34709 13:02:46 (0) ** MOF Registration: ''
    34710 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34711 13:02:46 (0) ** MOF Registration: ''
    34712 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34713 13:02:46 (0) ** MOF Registration: ''
    34714 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34715 13:02:46 (0) ** MOF Registration: ''
    34716 13:02:46 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34717 13:02:46 (0) ** MOF Registration: ''
    34718 13:02:46 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34719 13:02:46 (0) ** MOF Registration: ''
    34720 13:02:46 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34721 13:02:46 (0) ** MOF Registration: ''
    34722 13:02:46 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34723 13:02:46 (0) ** MOF Registration: ''
    34724 13:02:46 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34725 13:02:46 (0) ** MOF Registration: ''
    34726 13:02:46 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34727 13:02:46 (0) ** MOF Registration: ''
    34728 13:02:46 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34729 13:02:46 (0) ** MOF Registration: ''
    34730 13:02:46 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34731 13:02:46 (0) ** MOF Registration: ''
    34732 13:02:46 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34733 13:02:46 (0) ** MOF Registration: ''
    34734 13:02:46 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34735 13:02:46 (0) ** MOF Registration: ''
    34736 13:02:46 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34737 13:02:46 (0) ** MOF Registration: ''
    34738 13:02:46 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34739 13:02:46 (0) ** MOF Registration: ''
    34740 13:02:46 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34741 13:02:46 (0) ** MOF Registration: ''
    34742 13:02:46 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34743 13:02:46 (0) ** MOF Registration: ''
    34744 13:02:46 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
    34745 13:02:46 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
    34746 13:02:46 (0) ** You can refresh the WMI class provider buffer with the following command:
    34747 13:02:46 (0) **
    34748 13:02:46 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
    34749 13:02:46 (0) **
    34750 13:02:46 (0) ** WMI MOF representations: ............................................................................................ OK.
    34751 13:02:46 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
    34752 13:02:46 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
    34753 13:02:46 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
    34754 13:02:46 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
    34755 13:02:46 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    34756 13:02:46 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    34757 13:02:46 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
    34758 13:02:46 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    34759 13:02:46 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    34760 13:02:46 (0) **
    34761 13:02:46 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
    34762 13:02:46 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
    34763 13:02:46 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
    34764 13:02:46 (0) ** WMI static instances retrieved: ..................................................................................... 1822.
    34765 13:02:46 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
    34766 13:02:46 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
    34767 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34768 13:02:46 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
    34769 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
    34770 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
    34771 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
    34772 13:02:46 (0) **
    34773 13:02:46 (0) ** # of additional Event Log events AFTER WMIDiag execution:
    34774 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
    34775 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
    34776 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
    34777 13:02:46 (0) **
    34778 13:02:46 (0) ** 32 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
    34779 13:02:46 (0) ** => This error is typically a WMI error. This WMI error is due to:
    34780 13:02:46 (0) ** - a missing WMI class definition or object.
    34781 13:02:46 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
    34782 13:02:46 (0) ** You can correct the missing class definitions by:
    34783 13:02:46 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
    34784 13:02:46 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
    34785 13:02:46 (0) ** (This list can be built on a similar and working WMI Windows installation)
    34786 13:02:46 (0) ** The following command line must be used:
    34787 13:02:46 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
    34788 13:02:46 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
    34789 13:02:46 (0) ** with WMI by starting the ADAP process.
    34790 13:02:46 (0) ** - a WMI repository corruption.
    34791 13:02:46 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
    34792 13:02:46 (0) ** to validate the WMI repository operations.
    34793 13:02:46 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
    34794 13:02:46 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
    34795 13:02:46 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
    34796 13:02:46 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
    34797 13:02:46 (0) ** the WMI repository must be reconstructed.
    34798 13:02:46 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
    34799 13:02:46 (0) ** otherwise some applications may fail after the reconstruction.
    34800 13:02:46 (0) ** This can be achieved with the following command:
    34801 13:02:46 (0) ** i.e. 'WMIDiag ShowMOFErrors'
    34802 13:02:46 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
    34803 13:02:46 (0) ** ALL fixes previously mentioned.
    34804 13:02:46 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
    34805 13:02:46 (0) **
    34806 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34807 13:02:46 (0) ** WMI Registry key setup: ............................................................................................. OK.
    34808 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34809 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34810 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34811 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34812 13:02:46 (0) **
    34813 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34814 13:02:46 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
    34815 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34816 13:02:46 (0) **
    34817 13:02:46 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\ABCDEF\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_ISWDC2_2014.05.22_12.49.13.LOG' for details.
    34818 13:02:46 (0) **
    34819 13:02:46 (0) ** WMIDiag v2.1 ended on Donnerstag, 22. Mai 2014 at 13:02 (W:89 E:52 S:1).
    There are a lot of error in the report and I don't know, whether they are relevant or how to solve them. To my current knowledge, I need to solve at least some of them so that I can access the local WMI repository again and get replication back working.
    But after hours of research I am stuck. Any hints are greatly appreciated.
    Regards,
    Oliver

    I don't know why, but soon after posting this, I found a solution to the problem. The WMI part was solved in this thread:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
    The relevant portion is this:
    Open a CMD prompt in %windir%\system32\wbem
    mofcomp dfsrprovs.mof
    net stop winmgmt
    net start winmgmt
    net start iphlpsvc
    net stop dfsr
    net start dfsr
    I don't know why recompiling of all mof did not solve the problem, but the solution above did. Restarting the DCs solved the communication issue. I don't know why the primary DC forgot about the WMI DFS provider or why communication failed. However, it is
    working again, it seems.

  • TS1717 Ever since I downloaded and installed iTunes64Setup.exe  v. 6.0.1, it crashes on my Windows 7 system, with the useless message, "iTunes has stopped working.  A problem caused the program to stop working correctly.  Windows will close the program an

    iTunes64Setup.exe, even after multiple times of uninstalling and reinstalling with even a fresh download crashes with the message:
    "iTunes has stopped working.  A problem [unspecified] caused the program to stop working correctly.  Windows will close the program and notify you IF a solution is available."  I cannot get out of this loop and it renders my iPad HD useless.  I tried calling the Apple Store but was referred by an automated system to this web site.  I tried looking up the problem in the FAQ but it didn't help.
    merylew

    Hi there Nok Saensanoh,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W.

  • I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

    I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

    JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process.  You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

  • Hello  My system version 10.5.8  I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:   "Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".

    Hello
    My system version 10.5.8
    I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
    "Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
    After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
    I then tried the following experimental steps:
    a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
    b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
    c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
    d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
    e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
    Guys, please solve the problem
    Regards
    Ruslan Reed
    [email protected]

    MayaMa --
    There are many threads on this.  I typed "Uninstalling TastyApps" in the Google search, and came up with these:
    http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
    I do not know which of the many TastyApps haxies you have.  Perhaps it would be better to contact them directly, once you know which of their products you have.

  • The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, " The operation could not be completed.  The system cannot find the path specified" Resetting preferences did not fix.

    The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, “ The operation could not be completed.  The system cannot find the path specified” Resetting preferences did not fix.

    my os is windows 7.  elements 12 worked fine for many months then save for the web stopped working

Maybe you are looking for