System dialog boxes are in Franglais - help!

I have noticed that over the past few weeks software installation dialog boxes are in a mixture of French and English. In researching this I have discovered that it is not just software installation: for example if I click the padlock to authenticate in Users and Groups, it says "System Preferences essaie de déverrouiller les préférences Utilisateurs et groupes. Type your password to allow this." I have tried resetting the language to English in Terminal and enabling the root user in order to check that it too was set to English. This is all I could find in the forum. What else is there to do?

More people have reported the problem. Read > https://discussions.apple.com/message/21687010#21687010

Similar Messages

Is there dialog box are available in final release?

is there dialog box are available in final release?

You can make your own to some extent by borrowing an old web approach where you just overlay your panels so the front one (the 'dialog') is over the top of your content. You have to roll your own glasspane, close buttons, etc (but on the plus side they are then easy to style) and also it's not a true popup so if your dialog doesn't fit in the containing window it will not float outside of it.
See the code in this post for some more info: Effect that Will Darken a Node and all its children
On a stylistic front, I would also suggest only using dialogs for very small popup-style questions and avoid them for anything major. In my opinion the web has shown us that simpler is better - just go to a new 'page' (i.e. replace the main content of your view) if your 'dialog' is more complex and allow them to tab or 'forward/back' between each view. Swing was a far superior and more powerful UI technology than html/web ever was or ever could be and yet HTML knocked us out of the water by being very simple for users and also pretty-out-of-the-box. There's some lessons for us Java desktop developers there as JFX2 ushers us into the modern development eco-system. :)
Cheers,
zonski
Did you find this answer useful? If so, please mark as 'Correct' or 'Helpful'.

Portal 7.3 masthead customization - How to remove Logoff dialog box "Are you sure you want to logoff?"

Portal 7.3 masthead customization - How to remove Logoff dialog box "Are you sure you want to logoff?"
I have recently upgraded our portal to 7.3 sps10 and we are using the Ajax framework
I have a requirement to Remove the Logoff Dialog box "Are you sure you want to logoff?"
I am able to Import masthead.war into NWDS and get the project ready for development with the appropriate jar and libraries.
I am able to deploy the project also. I need help finding How to turn this dialog box off and just log the user off. I was able to accomplish this in Classic frame work page HeaderiView.jsp.
I have looked at afpmasthead.org.sj and masthead.jsp. I am not a js/jsp developer.
I can see the logoff dialog box being created but I am having trouble finding the logoff code.
Please advise me on the code changes required to remove the Logoff dialog box "Are you sure you want to logoff?" from the Ajax framework.
Any help on this matter would be greatly appreciated.
Thank you
Sarah

Thank you Troy for your Helpful Threads.
Problem Solution:
Followed the thread on How to download and change AFP Masthead on SAP Portal 7.3
Located the file which contains the logoff code from thread http://scn.sap.com/thread/3265584
The File with the Logoff coding in it is a Javascript file afpmasthead.js
Identified logoff code without dialog box using this thread https://scn.sap.com/thread/3307601
NovaDialogBox.performLogout(); (perform logoff)
I was able to remove the Logoff dialog box Do you really want to logoff? And replace it with logging the user off.
afpmasthead.js All the code is on 1 line, To fix this go to -->Source -->Format
Comment out the following lines of code and replace with logoff code
logoffLinkElement.onmouseup= function(aS) {
logoffLinkElement.onmouseup= function(aS) {
NovaDialogBox.performLogout();
Sarah

Create Application system Dialog box poping up when ever designer is invoked, Then...

Hi,
we had recently installed designer in our systems but when we invoke designer we got Create Application system Dialog box poping up , Then when i give an application name the following error comes up
RME-00011 Operation INS on CI_APPLICATION_SYSTEMS has failed
RME-02124 Failed to execute Sql Statement
begin
errcnt := rmmes.getsize;
rmmes.getall (:errutil,:errcode,:err1,:err2,:err3,:err4,:e rr5,:err6,:err7);
end;
RME-02105 Oracle error occurred
ORA-06512 Line 157 in repos_user.rmmes
ora-06512 at line 3
ora-01403 No Data Found
Please check for these errors and if possible mail your replies to the following email : [email protected]
ASASP
Thanking in advance
Chan

Hi Timo.
In my application all the navigation rules are defined in faces-config.xml.
But I found following statement in the "fusion developers guide"
'**You cannot specify dialog:syntax in navigation rules within the faces-config.xml file if your Fusion web application uses ADF Controller features such as task flows. However, you can use the dialog:syntax in the control flow rules that you specify in the adfc-config.xml file.**'
Since, my application is using faces-config.xml for defining navigation rules and using task-flow as well, I suspect , this is the root of my problem.
Do u have any solution for it?
Thanks
Vikas

Indd CS4 save/export Dialog Boxes are so small :(

I have a 24" iMac and now have installed Indesign CS4. The save/place/export dialog boxes are so small. I have dragged them larger and that is great.
But it does not stay that way across the program or even the same document...
I don't know if I did something different on CS3 but once I set it, it seemed to always remember the setting even on new documents.

I can't help but I can confirm I'm getting the same problems in the CS4 apps, not just InDesign (with Leopard 10.5.5). I hope a fix for this comes out eventually. As Mike says, it happens with Save, Save As, Print To Postscript etc so I encounter it at least a hundred times a day. Very frustrating.

I am not able to click on the installation options for CS2. All the boxes are gray. Help.

I am not able to click on the installation options for CS2. All the boxes are gray. Help.

You can refer to the article:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

I need help - Open windows and dialog boxes are ghosting and flashing.

Hi All,
My Mac Pro has recently come down with a "bug". When i open multiple windows they don't seem to cope well with each other and parts of the window behind will still show through the window in front in fragments. When downloading, the loading bar will also flicker and partly show the dialog box behind. The only thing that fixes the broken up windows/dialog boxes is to minimize then maximize again. At first i thought it was a memory issue but the problem occurs with no applications running except for finder. I have done several restarts, updated my software and have checked my hard drive in disk utility and everything appears okay?
I can still operate the machine but it's getting a little annoying. Can anyone help me here?

Hi nayefo,
Try installing multitouch, and then see, while in windows, if you've successfully installed multitouch and multitouch mouse, you should have those drivers. Also check if you've installed trackpad and trackpad enabler.
Cheers,
Erik

Open and Save dialog boxes are sorted reverse alpahbetically by default

I have a user that experiences the same frustrating experience every time she restarts Apple Mail. All of her open and save dialog boxes in Mail are sorted from Z to A. She can click the name field to change the sort, but it will return to Z-A if she quits and reopens the program. The Finder is set (and stays) at A-Z. Other applications do not exhibit this problem. I am loathe to reset the preferences since that means having to set up accounts again. Restarting the computer and removing user caches made no difference. Any suggestions? This is an iMac Mid 2008 running Mac OS X 10.6.8.

I solved my own question through trial and error.
Just select "None" on the dropdown selector (see screen capture, above) and the Open/Save dialog will revert to the older version.

Dreamweaver CS4 MacOS X dialog boxes are displaying the wrong font

Just installed a free font I needed to use for a graphic design project. Opened up Dreamweaver to do a different project and found that all the text in the dialog box was being displayed in this font.
This is pretty maddening to look at - how do I change it back?

Er, uninstall the font?
Installing a new font should not do that to Dreamweaver. It sounds as though you have overwritten a system font.

InDesign CS2 & Leopard: Place & Export dialog box areas cutoff

I am having severe problems with InDesign CS2 and Leopard, and before anyone says "upgrade to CS3", we can't.
Almost every time I go to place a graphic or export a PDF, the system hangs for a few seconds with the wheel spinning, then InDesign just quits.
I also notice that part of the dialog boxes get cut off near the top.
Anyone have similar problems?

Even upgrading won't eliminate all the Leopard incompatibilities. If you
upgraded to Leopard from Tiger the best advice is to go back.
Have a look around this forum and the Creative Suite forum for plenty of
conversation.
Bob

Some extension dialog boxes are blank

When I press on some extension buttons (for example Ghostery, Self-Destructing Cookies) on top bar, or on menu bar, to open their dialog boxes, those boxes opens but looks like white blank boxes. They worked before, but now they are empty.
Here an example: http://c2n.me/jqqe35.jpg

This issue can be caused by the Ghostery extension.
*[[/questions/1020685]] Ghostery add-on + FF 31 and newer = Blank options window
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

File Dialog Box?? please help!

button1 is to generate a text file to extract the data. however, i want it to prompt me a file dialog box to allow me to choose the location i want to save it. i tried " javascript:document.execCommand('SaveAs','true','test.txt'); " but it only saves the html format. any idea how could i save the extracted data? kindly advise!!
<SCRIPT LANGUAGE="JavaScript">
               <%
               java.text.DateFormat ais = new java.text.SimpleDateFormat("dd-MM-yyyy hh.mm.ss");
               String formattedNowTime = ais.format(now);
               int count = 1;
               %>
               function button1()
               <%
                    ResultSet rs3 = stmt3.executeQuery("SELECT W.Grp, W.Adm_No,SSN.Repeat_Cnt, S.Name, [Absent%], WarnNo, Issue_Date, Issue_By, FromDate, ToDate, S.TutGrp, T.TutorName FROM Warning_Letters W, Students S, Student_Study_Modules SSN, Tutors AS T "+
                               "WHERE SSN.Adm_No=S.Adm_No AND SSN.Module_Code=W.Module_Code AND S.Adm_No=W.Adm_No AND W.Module_Code='"+moduleRQ+"' AND S.TutGrp=T.TutGrp AND W.Issue_Date between #"+date1+"# AND #"+date2+"# ORDER BY Grp, S.Name, W.WarnNo");
                    //count++;
                    String path = ("C:\\\\temp\\\\" +moduleRQ+ " ("+modAbbr+") " +formattedNowTime+ ".txt");
                    File strFile = new File(path);
                    Writer objWriter = new BufferedWriter(new FileWriter(strFile));
                    objWriter.write(moduleRQ+ " / " +descRQ+ "("+modAbbr+")");
                    objWriter.write("          " +formattedNowTime);
                    objWriter.write("\r\n"+"Name"+"\r\t"+"\r\t"+"AdmNo"+"\r\t"+"W.No"+"\r\t"+"Issue"+"\r\t"+"By"+"\r\t"+"From"+"\r\t"+"To"+"\r\t"+"PEM");
                    while(rs3.next()){
                    String issuedname = rs3.getString("Name");
                    String admnumber = rs3.getString("Adm_No");
                    String warnNumber = rs3.getString("WarnNo");
                    String IssueBy = rs3.getString("Issue_By");
                    String IssueDate = rs3.getString("Issue_Date");
                    String fromDate=rs3.getString("FromDate");
                    String toDate=rs3.getString("ToDate");
                    String tName=rs3.getString("TutorName");
                    String[] monthArray={"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec"};
                    /*Converting Dates to "dd/mm/yyyy" format*/
                    String day      = IssueDate.substring(8,10);
                    String month      = IssueDate.substring(5,7);
                    IssueDate= day+" "+monthArray[Integer.parseInt(month)-1];
                    day      = fromDate.substring(8,10);
                    month      = fromDate.substring(5,7);
                    fromDate= day+" "+monthArray[Integer.parseInt(month)-1];
                    day      = toDate.substring(8,10);
                    month      = toDate.substring(5,7);
                         toDate= day+" "+monthArray[Integer.parseInt(month)-1];
                    objWriter.write("\r\n"+issuedname+"\r\t"+admnumber+"\r\t"+warnNumber+"\r\t"+IssueBy+"\r\t"+IssueDate+"\r\t"+fromDate+"\r\t"+toDate+"\r\t"+tName);
                    objWriter.flush();
                    objWriter.close();
               %>
          </SCRIPT>

Do not use JSP for that. Use a servlet. You can find here an example: http://balusc.blogspot.com/2007/07/fileservlet.html

Issue with dialog boxes in Designer, please help

Hi,
I'm having a problem with designer the last 4 days. It was working fine before.
Any dialog box wants to open, I can not insert tables, edit properties, etc.
I'm using Designer 11.5.0.0 with SP3 update, I reinstalled every thing, but it's still not working.
Does someone know how to fix it?
Thanks in advance,
Marcela

Hi,
The issue is resolved, but I don't know what caused this error.
I uninstalled the java components and BO then I deleted the BO folder under program files, then I deleted all BO entries in the registry.
Finally I reinstalled everything except the service pack and that finally worked. I don't know the cause of this error.
Regards,
Marcela

Itunes freezes with windows 7 when dialog boxes are opening?

I have an issue with itunes (i am running whatever the latest version is) and Windows 7 - it freezes for long periods when I do any actions which lead to additional windows pr dialog boxes to appear. For example when I click to create a new playlist there is sometimes a very long wait for options window to appear, when I click to delete a song and waiting for confirmation box to appear, etc. I have been experiencing this issue with every version of Itunes and windows

It is enough. I am fed up now.
iTunes does not update automatically on my Windows 7 (64) and never did on my previous Windows 7 (32).
Yes, update freezes again and again as it did on my old computer. So what the hek do you want me to update?
And no:
I do NOT want to borwse any more tutorials.
I do NOT want to personalize my experience.
I do NOT want to check out any community discussions.
I do NOT want to 'see around the communities'!
I just want to have fun! If possible with my iPod, if not I'll change that to another device too (and in order not to unsatisfy any other person not even donate it to an NGO).
One more chance for Apple an iTunes:
Just tell me what to do in order to fix my update problems - or else I shall be gone.
CU? Your decision.
Urs

SharePoint 2013 Pop-Up Dialog Boxes are Blank

Hi all,
I'm having a weird issue where any "dialog" pop-up window appears completely blank, but has the word "Dialog" in the top left hand corner of the box. Or, I'll just get the "Working on it" message for a couple minutes, and the
box goes to a blank rectangle shape (no content whatsoever inside of it).
This applies to all lists or libraries that have the "Launch forms in a dialog" option to YES or any that use that behavior by default (i.e. calendar or doc library upload dialog).
Any idea what could be causing this?
Thanks!

Hi,
Is the master page is customized. Please inspect using developer tool any css class preventing to appear. just a quick thought.
Thanks!
Hello!
In this case, the sites are using the default master page. However, one thing to note is these are sites that were migrated from a different SharePoint 2013 server farm. I'm not sure if that matters or not.

System dialog boxes are in Franglais - help!

Similar Messages

Maybe you are looking for