System Disabled - Logitech G56 Help

I have a Logitech G56 laptop and am getting "system disabled" error...
Key: 55239716
How do I unlock the Laptop?
This question was solved.
View Solution.

Try >> 40191338
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • Compaq CQ61-420US getting system disable 65879468 please help

    When I power on my notebook I'm getting a message saying enter administrator password or power on password. After entering the password wrong 3 times I get a error message system disable 65879468

    Hi,
    Double post, please use:
        http://h30434.www3.hp.com/t5/Notebook-Recovery/Sta​rt-up-error-message-65879468/m-p/4853515
    Thanks,.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My hp laptop shows system disabled pls anybody help..

    Shows system disabled error code
    75395019
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    Right click the Start Menu icon, select Command Prompt (Admin), click ‘Yes’ to the uac prompt and enter the following commands - hit enter after each one.
    diskpart
    list volume               ( make a note of the number assigned to the usb flash drive )
    select volume X     ( replace X with the number assigned to the usb flash drive )        
    attributes disk clear readonly
    After you get the prompt that the write protect has been removed, type exit and hit enter, then type exit and hit enter again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • System disabled after wrong Admin Password

    HI,
    I am posting for the first time so dont actually know if its in the right thread.
    My system got disabled.
    HP ENVY m6-1205dx, Windows 8 .
    Froze after 3 attempts to enter administrator password!
    Screen types:   System Disabled
                                    [92025607]
    Plz help asap.
    This question was solved.
    View Solution.

    Hi,
    Enter:      23983229
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • System disabled error

    Hi! I recently changed my password and I forgot it. I'm getting this system error on my computer System disabled 47574453
    Please help!
    Thanks!

    Hi
    Enter:
    58452495

  • System disabled please help...

    Hi, I purchased a laptop today and went to install windows on it and it came up asking me for a password as soon as i boot up, now it says system disabled 68263278, Can anybody help please.
    Thanks in advance

    How old is the unit? If you just purchased it you should take it back to the vendor if you have to install the operating system yourself. If you bought it from a private entity, it may be stolen and the Lo-Jac service has started and disabled the system but the subscription has expired. Find out the background of the unit and get the honest facts. If all is legit, you can ind the information here. If is'nt, all you do to get this unit online will be fraudlent and will eventually cause you grief.

  • System Disable Key 59628700. Please Help Me

    I can't remember my password for the life of me. Please Help Me!
    System Disable Key 59628700
    This question was solved.
    View Solution.

    Big try.
    46780326
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Help System Disabled

    My notebook 2000-2b1GNR screen is stuck on black screen with blue box reading system disabled [70531730] can someone please help override this?
    This question was solved.
    View Solution.

    Hi,
    Please enter:
       65499316
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • System disabled help

    Hello,I forgot the bios password. I get system disabled code 53747859.Please help me reset te passwords. Thanks' 

    Hi: Please read the first post at the link below which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​stems-a​... Then... You can: 1. Use the unlock code you generated to enter the BIOS
    2. Disable all passwords that are enabled in the BIOS's security menu.
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.

  • Compaq v3100 - Forgot BIOS password. System Disabled [00593} message. Help !!

    Hi ...
    I forgot the Bios Password for my V3100. The system displays "System Disabled [00593]".
    I need to replace my HD but Bios is currently set not to allow CD boot.
    Would much appreciate your help
    LEC-HC

    Try
    Generic Phoenix
    mxal
    HP/Compaq Phoenix BIOS
    oibukzi
    I give the generator:
    http://bios-pw.org/
    Some older models have the reference manual to remove the RTC battery to clear the password.
    http://h10032.www1.hp.com/ctg/Manual/c01035667.pdf

  • System disable 97126017 for my HP laptop, can anyone help ?

    I keep receiving an error, system disable 97126017 can anyone help
    This question was solved.
    View Solution.

    Hi,
    Enter:      28884039
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • System disabled [61482588] pavition g7 help

    i dont get any password box just black screen with system disabled [61482588]
    This question was solved.
    View Solution.

    Hi,
    Try a Hard Reset as follows.
    Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds. 
    Plug in the AC Adapter ( leave the battery out for the moment ) and start the notebook.
    If you now see a password box, type 74580508 and hit enter.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to reset?"Enter Administra​tor Password" on Compaq CQ62. System disabled key 75858185

    Hello everyone,
    I have a Compaq CQ62.
    When I've turned it on, it comes up with the bios screen message "Enter Administrator or Power on Password".
    I tried a few incorrect attempts and after the third attempt, a message "System disabled - Key 75858185" has appeared.
    Can anyone please help please?

    Hello everyone,
    I have a Compaq CQ62.
    When I turn it on, it comes up with the bios screen message "Enter Administrator or Power on Password".
    I tried a few incorrect attempts and after the third attempt, a message "System disabled - Key 75858185" has appeared.
    Can anyone help please?

  • Presario V3000 system disabled 00019

    I had a BIOS password which I have been using without any problem
    My problem began when I removed the first password in the BIOS. It was a success
    I tried to remove the second password but failed so thinking it was not important as I had already removed the admin password, I save the setting and reboot.
    This is when the problem started, it starts up and request for a password. I type the previous password but failed
    After 3X it gives me the message "System disabled 00019"
    Can anyone help ?

    Your model is one of the few that can actually clear the password by removing the battery. See the Maintenance and Service Guide here for instructions:
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=1817059&task=&
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Compaq presario V5000 power on password reset system disabled code06004

    Forgot my power up password n. Can't get past that screen on my presario v5000 compaq laptop. after 3 attempts screen freezes to 'system disabled 06004 .does anyone have a factory reset method that may help me?? This would be highly appreciated!
    This question was solved.
    View Solution.

    Hi,
    Enter:       uvnjddi
                           or
                       srwfjou
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Video pinch-to-expand

    Can anyone out there explain how to set a pinch-to-expand video function? I want the video to play in a small frame but allow the user to pinch-to-expand for full screen viewing. I know you can have a still image as the poster image and have the user

  • Deleting of SC and PO in backend

    Hi, We are currently using SRM 5.0 with classic scenario implemented. When the Shopping cart is approved in EBP, it is sent to the backend with PO created. The PO will be reflected in EBP as well and confirmation is made in EBP. After a migration, we

  • Labview project does not run on different computer

    I have some problems with a lvproj file containing an application. The application used to work with as long as I had all subvis inside a llb file. With the very same VIs I now created a lvproj file on Labview 8.6. I can successfully load and run the

  • Mac OSX 10.6.8 Cannot create new admin password. Have tried terminal. Password is lost or not recognized.

    Have tried terminal. Password is lost or not recognized. I have tried using advice I found online. There is no disk to reboot. If I try to hold the C key it doesn't have a downward arrow it's up. I tried Terminal, doesn't recognize any commands. I'm

  • Can't see youtube videos

    Hello, I will like to know how can I see some videos in youtube most of all requires flash player and I can't install it in my phone help !!