System docs flow errors

Hi Experts
our systems are connected in front end with SAP and also with Siebel systems while in document flow Iam totally confusing in which state it is converting in to which at 3rd party to SAP what kind of docs and in CRM what docs and in r3 what level?
Please give complete desciption about this document transformation between systems.

Hi
it is so simple to understand which documentation system is used to carry the data in which system
when it is in SAP CRM the data is carried out by a Bdocs
where in crm server after validation is over gets stored in CRm data base this will be performed by CRM Adapter
when data moves once out of crm to R3 it gets converted into
Idoc , but 3rd party like siebel is also intigrated in your system
data migration happens with help of ALE and SOAP technology
and the data is carried out by XML and IDocs to Siebel systems
Reward for useful
Venkat

Similar Messages

  • Cross system goods flow issue

    Hi ,
    Our client uses 2 SAP different Systems for EU and US region.
    For intercomany movements between these Systems, we use STOs for these cross  system goods flow.
    We use inbound deliveries for receiving goods.
    It works for STOs with no account assignment but for STOs with some account assignment , we could not post goods receipt for Inbounds . System throws error message as please enter valid plant instead  of XXXX where is XXXX is a plant number in different SAP system.
    Is some extra config required for intercomany movemnts with account assignment.

    Hi,
    Could you please elaborate more your error :
    As which Acc. assignment cat you using in PO, and what type of intercompany STO's you creating in system ?
    What Doc type used for creating STO intercompany ?
    Regards,
    Ninad Kshirsagar

  • Document flow error in Quality notication

    Hello All,
             I am seeking solution for document flow error in notification. After completing notification we are not able to find graphical network in Document flow.
    We are getting error message says "no original document in document flow"
    We have followed this process flow, notification --> create ECN --> change the material with reference to the ECN--> iqs2 complete the notification.
    Kindly share if you any solution on this error.
    Regards,
    Muthusamy

    HI,
    It is an exceptional issue I feel.
    Could you check the tables whether that particular doc. is updated or not?
    check VBFA table.
    Regards
    Suresh.

  • Reader won't open docs. mac. error message.

    Reader won't open any docs.  Error message "Adobe Reader could not open (file name) because it is either not a supported file type or because the file has been damaged . . . ."  Mac system 10.7.5.

    Ok, it's probably how you save the files.
    DON'T use Save from the File menu in Safari
    DON'T use any save icon in a safari toolbar
    Use only
    1. Right/ctrl click on a link to a PDF BEFORE showing it, save from the pop-up menu (no good if the PDF comes from a button, and in some other cases)
    2. Hover to get the ADOBE toolbar and save from that.

  • When i am doing PGI System giving this error message

    When i am doing PGI System giving this error message
    when i am posting the stockthrough t.code mb1c also i am getting this error
    For document type WL, an entry is required in field Doc. Hdr Text
    For document type WA, an entry is required in field Doc. Hdr Text
    Message no. F5480

    Hi,
    Enter header text or make the header text field option for the document type. It will allow you to save.
    You can make the field as optional either with Transaction Variant (SHD0) or from IMG.
    Regards,
    Naveen.

  • ITunes no longer works on my Windows VISTA system.  Get error msg saying C runtime library incorrectly... Error 7, Windows error 1114..

    iTunes no longer works on my Windows VISTA system.  Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114.  Same msg, or one that says unable to install, when trying to update or reinstall iTunes.  iTunes worked well up until about a month ago when this error msg starting appearing.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • SAP System Message: Syntx error or generation error in a screen

    dear sap basis gurus,
    i am currently having problems signing on to our DEV server. i get this error message:
    <SID>: SAP System Message
    Syntx error or generation error in a screen.
    it won't let me log on.
    there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
    have you encountered this problem before? please help me as there we have two imminent go-lives.
    thank you very much in advance.
    best regards,
    albert

    hello nick, ashok,
    thank you very much for your responses.
    i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
    i hope i would no longer encounter the error message.
    again, thank you.
    best regards,
    albert

  • System Copy(homogenous) Error -Database load phase

    Hello All,
    I am doing System Copy thorugh Export - Import meothed of SAP R/3 4.7 110 on Windows2003-SQL 2000 SP3. Making Copy of Production server with different SID.After taking Export Successfully from Production Server I am Importing it to Target System
    but i am facing error at Database Load Phase getting the same error on almost every process like SAPSSEXE,SAPCLUST,SAPAPPL0,SAPAPPL1 etc. the error is below :
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: START OF LOG: 20090808202046
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: version R6.20/V1.2
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe -ctf I C:\EXPORT/DATA/SAPAPPL1.STR C:\EXPORT/DB/DDLMSS.TPL C:\SAPinst MSSQL SAPINST3/SAPAPPL1.TSK MSS -l C:\SAPinst MSSQL SAPINST3/SAPAPPL1.log
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: job completed
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: END OF LOG: 20090808202047
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: START OF LOG: 20090808202053
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: version R6.20/V1.2
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst MSSQL SAPINST3/SAPAPPL1.cmd -l C:\SAPinst MSSQL SAPINST3/SAPAPPL1.log -loadprocedure fast
    DbSl Trace: SQLOLEDB Provider Release:08.10.3959
    DbSl Trace: Shared cache sizes: header 52 bytes, 10000 names (13360000 bytes), 1000 dynamic statements (5436000 bytes), total 18796052 bytes
    DbSl Trace: Initializing private procedure name cache.
    DbSl Trace: procedure cache created/attached
    DbSl Trace: Thank You for using the SLOLEDB-interface
    DbSl Trace: Connected to db server : [prdt], dbname: PRT, dbuser: prt
    DbSl Trace: Using dynamic link library 'E:\usr\sap\PRT\SYS\exe\run\dbmssslib.dll'
    DbSl Trace: dbmssslib.dll patch info
    DbSl Trace:   patchlevel   0
    DbSl Trace:   patchno      524
    DbSl Trace:   patchcomment DBDYNPSOURCE/DBDYNPSOURCE~, SHADOW_IMPORT_ALL (578789)
    DbSl Trace: The IRow interface is supported by this OLEDB provider
    DbSl Trace: ParamStmtExec: line 23573. hr: 0x80040e37 Invalid object name 'SVERS'.
    DbSl Trace: HandleOledbError [ParamStmtExec,line 23573]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
    DbSl Trace: ParamStmtExec failed.  HR 80040e37 DBSL retcode 103. stmt: [SELECT VERSION AS c FROM SVERS ]
    DbSl Trace: Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:12157
    DbSl Trace: DbSlRead - Error 103 (dbcode 208) on open
    DbSl Trace: DbSlRead - <##Y2PRDTprt00000035720000000001202054>
    DbSl Trace: DbSlRead - Error 103 (dbcode 208) on fetch
    DbSl Trace: DbSlRead - <##Y2PRDTprt00000035720000000001202054>
    Sat Aug 08 20:20:54 2009
    **LOG BZA=> table SVERS      does not exist on database [dblink#1 @ 1292] [dblink  1292 ]
    (DB) INFO: connected to DB
    (GSI) INFO: dbname   = "PRTprdt                                                                                "
    (GSI) INFO: vname    = "MSSQL                           "
    (GSI) INFO: hostname = "PRDT                                                            "
    (GSI) INFO: sysname  = "Windows NT"
    (GSI) INFO: nodename = "PRDT"
    (GSI) INFO: release  = "5.2"
    (GSI) INFO: version  = "3790 Service Pack 2"
    (GSI) INFO: machine  = "2x Intel 80686 (Mod 15 Step 2)"
    DbSl Trace: ParamStmtExec: line 23573. hr: 0x80040e37 Invalid object name 'SVERS'.
    DbSl Trace: HandleOledbError [ParamStmtExec,line 23573]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
    DbSl Trace: ParamStmtExec failed.  HR 80040e37 DBSL retcode 103. stmt: [SELECT VERSION AS c FROM SVERS ]
    DbSl Trace: Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:12157
    DbSl Trace: DbSlRead - Error 103 (dbcode 208) on open
    DbSl Trace: DbSlRead - <##Y2PRDTprt00000035720000000002202054>
    DbSl Trace: DbSlRead - Error 103 (dbcode 208) on fetch
    DbSl Trace: DbSlRead - <##Y2PRDTprt00000035720000000002202054>
    Interface access functions from dynamic library dbmssslib.dll loaded.(IMP) INFO: import of /1DF/__GI000 completed (0 rows)
    (IMP) INFO: import of /BDL/BADHOST completed (0 rows)
    (IMP) INFO: import of /BDL/CUSTSES completed (0 rows)
    (IMP) INFO: import of /BDL/INTSESS completed (0 rows)
    (IMP) INFO: import of /BDL/MSGLOG completed (0 rows)
    (IMP) INFO: import of /BDL/NOHOSTS completed (0 rows)
    (IMP) INFO: import of /BDL/SESDEST completed (0 rows)
    (IMP) INFO: import of /BDL/SESS completed (0 rows)
    (IMP) INFO: import of /BDL/STATUS completed (0 rows)
    (IMP) INFO: import of /BDL/TESTSES completed (0 rows)
    (IMP) INFO: import of /BDL/TRHOSTS completed (0 rows)
    (IMP) INFO: import of /SAPDMC/LSOFIL completed (56 rows)
    (IMP) INFO: import of /SAPDMC/LSOFIW completed (0 rows)
    (IMP) INFO: import of /SAPDMC/LSOPRT completed (0 rows)
    (IMP) INFO: import of /SAPSLL/BWHSTR3 completed (0 rows)
    (IMP) INFO: import of /SAPSLL/CUWLAR3 completed (0 rows)
    (IMP) INFO: import of /SAPSLL/KMATWLR3 completed (0 rows)
    (IMP) INFO: import of /SAPSLL/OBJIDX completed (0 rows)
    (IMP) INFO: import of /SAPSLL/OBJSSF completed (0 rows)
    (IMP) INFO: import of /SAPSLL/OBJSYNC completed (0 rows)
    (IMP) INFO: import of /SAPSMOSS/UPDATE completed (0 rows)
    (IMP) INFO: import of /SAPTRX/AOTREF completed (0 rows)
    (IMP) INFO: import of /SAPTRX/APPTALOG completed (0 rows)
    (IMP) INFO: import of /SAPTRX/ASITEMID completed (0 rows)
    (IMP) INFO: import of /SAPTRX/MTOBJLOG completed (0 rows)
    (IMP) INFO: import of /SCMB/DF_DEL_TAB completed (0 rows)
    (IMP) INFO: import of /SCMB/DF_DNET completed (0 rows)
    (IMP) INFO: import of /SCMB/DF_DOC completed (0 rows)
    (IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of /SCMB/DF_DOC_VAL
    completed (0 rows)
    (IMP) INFO: import of /SCMB/DF_DQTY completed (0 rows)
    (IMP) INFO: import of /SCMB/DF_DVALUE completed (0 rows)
    (IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of /SCMB/TREEVIEW2 completed
    (0 rows)
    (IMP) INFO: import of /SDF/INDX completed (0 rows)
    (IMP) INFO: import of /SDF/SDBAH completed (0 rows)
    (IMP) INFO: import of /SOMO/JOSCHEDL completed (0 rows)
    (IMP) INFO: import of /SOMO/JOSCHEDLT completed (0 rows)
    (IMP) INFO: import of /SSF/DHEAD completed (1 rows)
    (IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of /SSF/DTAB completed (18
    rows)
    (IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of /SSF/PTAB completed (7520 rows)
    (IMP) INFO: import of A055 completed (0 rows)
    (IMP) INFO: import of A056 completed (0 rows)
    (IMP) INFO: import of A064 completed (0 rows)
    (IMP) INFO: import of A065 completed (0 rows)
    (IMP) INFO: import of ABDBG_BPS completed (0 rows)
    (IMP) INFO: import of ABDBG_INFO completed (0 rows)
    (IMP) INFO: import of ACCRPOST completed (0 rows)
    (IMP) INFO: import of ACCTCR completed (7346418 rows)
    (IMP) INFO: import of ACCTHD completed (624272 rows)
    (IMP) INFO: import of ACCTIT completed (3673209 rows)
    (IMP) INFO: import of ACEPSOH completed (0 rows)
    (IMP) INFO: import of ACEPSOI completed (0 rows)
    (IMP) INFO: import of ACEPSOIT completed (0 rows)
    (IMP) INFO: import of ACL_ACE completed (0 rows)
    (IMP) INFO: import of ACL_ACTGR completed (0 rows)
    (IMP) INFO: import of ACL_ACTGRE completed (0 rows)
    (IMP) INFO: import of ACL_ACTGRT completed (0 rows)
    (IMP) INFO: import of ACL_ACTVT completed (0 rows)
    (IMP) INFO: import of ACL_ACTVTT completed (0 rows)
    (IMP) INFO: import of ACL_CACHE completed (0 rows)
    (IMP) INFO: import of ACL_MAIN completed (0 rows)
    (IMP) INFO: import of ACL_OBJTP completed (0 rows)
    (IMP) INFO: import of ACL_OBJTPA completed (0 rows)
    (IMP) INFO: import of ACL_OBJTPG completed (0 rows)
    (IMP) INFO: import of ACL_OBJTPT completed (0 rows)
    (IMP) INFO: import of ACL_OWNER completed (0 rows)
    (IMP) INFO: import of ACRELATION completed (76954 rows)
    (IMP) INFO: import of ACTFLI completed (0 rows)
    (IMP) INFO: import of AD01DLI completed (0 rows)
    (IMP) INFO: import of AD01DLIEF completed (0 rows)
    (IMP) INFO: import of AD01DLISF completed (0 rows)
    (IMP) INFO: import of AD01FILTVAR completed (0 rows)
    (IMP) INFO: import of AD01STRUCTVAR completed (0 rows)
    (IMP) INFO: import of AD01VARMASTER completed (0 rows)
    (IMP) INFO: import of ADATABSIZE completed (0 rows)
    (IMP) INFO: import of ADJT_TRANSACTION completed (0 rows)
    (IMP) INFO: import of ADMI_BUFFC completed (0 rows)
    (IMP) INFO: import of ADMI_BUFFI completed (0 rows)
    (IMP) INFO: import of ADMI_FILES completed (0 rows)
    (IMP) INFO: import of ADMI_JOBS completed (0 rows)
    (IMP) INFO: import of ADMI_RJOBS completed (0 rows)
    (IMP) INFO: import of ADMI_RUN completed (0 rows)
    (IMP) INFO: import of ADMI_SKIP completed (0 rows)
    (IMP) INFO: import of ADMI_STATS completed (0 rows)
    (IMP) INFO: import of ADMI_VARIA completed (0 rows)
    (IMP) INFO: import of ADMI_XDOCS completed (0 rows)
    (IMP) INFO: import of ADMI_XRUN completed (0 rows)
    (IMP) INFO: import of AFAB completed (0 rows)
    (IMP) INFO: import of AFBP completed (0 rows)
    (IMP) INFO: import of AFFH completed (0 rows)
    (IMP) INFO: import of AFFL completed (366118 rows)
    (IMP) INFO: import of AFFT completed (0 rows)
    (IMP) INFO: import of AFFV completed (0 rows)
    (IMP) INFO: import of AFFW completed (7 rows)
    (IMP) INFO: import of AFFWPRO completed (0 rows)
    (IMP) INFO: import of AFIH completed (113 rows)
    The above error are also present in the other Process log files.
    But when i saw the installation logs of the Source system the same errors are also there(but it was still Sucessfull Standard installation).
    there is one difference as well I am SQL SP3 (8.00.780) but existing Production server is SQL SP3(8.00.929).
    My installation is stoppoing here with error While executing Script.
    I've done Homogenous copy on WiN-ORACLE many times but on WIN-SQL i am doing very first time.
    While installation database phase it asked me for EXPORT CD twice first time for standard(which usually we got with SAP Software) and Second time for Migration EXPORT. that is different from ECC5.0 i think.
    Any suggestions?
    Regards,
    Vinay
    Edited by: Vinay Paul on Aug 8, 2009 11:01 PM

    Dear Markus,
    Thanks for the Reply.
    As you Said i am upgrading my kernal (making it same as current kernel using bysource system that is 175).
    Hope this will solve my problem ....Do i have to restart my complete installation now?
    My recent last error was :
    SAPSSRC.LOG
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: START OF LOG: 20090808202048
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: version R6.20/V1.2
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe -ctf I C:\EXPORT/DATA/SAPSSRC.STR C:\EXPORT/DB/DDLMSS.TPL C:\SAPinst MSSQL SAPINST3/SAPSSRC.TSK MSS -l C:\SAPinst MSSQL SAPINST3/SAPSSRC.log
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: job completed
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: END OF LOG: 20090808202048
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: START OF LOG: 20090808221527
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: version R6.20/V1.2
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst MSSQL SAPINST3/SAPSSRC.cmd -l C:\SAPinst MSSQL SAPINST3/SAPSSRC.log -loadprocedure fast
    DbSl Trace: SQLOLEDB Provider Release:08.10.3959
    DbSl Trace: Shared cache sizes: header 52 bytes, 10000 names (13360000 bytes), 1000 dynamic statements (5436000 bytes), total 18796052 bytes
    DbSl Trace: Initializing private procedure name cache.
    DbSl Trace: procedure cache created/attached
    DbSl Trace: Thank You for using the SLOLEDB-interface
    DbSl Trace: Connected to db server : [prdt], dbname: PRT, dbuser: prt
    DbSl Trace: Using dynamic link library 'E:\usr\sap\PRT\SYS\exe\run\dbmssslib.dll'
    DbSl Trace: dbmssslib.dll patch info
    DbSl Trace:   patchlevel   0
    DbSl Trace:   patchno      524
    DbSl Trace:   patchcomment DBDYNPSOURCE/DBDYNPSOURCE~, SHADOW_IMPORT_ALL (578789)
    DbSl Trace: The IRow interface is supported by this OLEDB provider
    (DB) INFO: connected to DB
    (GSI) INFO: dbname   = "PRTprdt                                                                                "
    (GSI) INFO: vname    = "MSSQL                           "
    (GSI) INFO: hostname = "PRDT                                                            "
    (GSI) INFO: sysname  = "Windows NT"
    (GSI) INFO: nodename = "PRDT"
    (GSI) INFO: release  = "5.2"
    (GSI) INFO: version  = "3790 Service Pack 2"
    (GSI) INFO: machine  = "2x Intel 80686 (Mod 15 Step 2)"
    Interface access functions from dynamic library dbmssslib.dll loaded.(IMP) INFO: import of ABTREE completed (39 rows)
    (IMP) INFO: import of AKB_CHKCONF completed (0 rows)
    (IMP) INFO: import of AKB_INDX completed (0 rows)
    (IMP) INFO: import of APTREE completed (1531 rows)
    (IMP) INFO: import of APTREET completed (75 rows)
    (IMP) INFO: import of CAPTREE completed (0 rows)
    (IMP) INFO: import of CAPTREET completed (0 rows)
    (IMP) INFO: import of CCCEXIT completed (44 rows)
    (IMP) INFO: import of CCCINFO completed (15 rows)
    (IMP) INFO: import of CLMCUS completed (0 rows)
    (IMP) INFO: import of CONTCOMP completed (2 rows)
    (IMP) INFO: import of CONTCOMPT completed (4 rows)
    (IMP) INFO: import of CONTCOMPX completed (2 rows)
    (IMP) INFO: import of CONTCOMPXT completed (3 rows)
    (IMP) INFO: import of CROSS completed (1399548 rows)
    (IMP) INFO: import of CUSTDIR completed (0 rows)
    (IMP) INFO: import of CWBMODILOG completed (0 rows)
    (IMP) INFO: import of DBDATA completed (0 rows)
    (IMP) INFO: import of DIRTREE completed (21 rows)
    (IMP) INFO: import of DVSEQDIR completed (0 rows)
    (IMP) INFO: import of DWTREE completed (522 rows)
    (IMP) INFO: import of EUDIAL completed (0 rows)
    (IMP) INFO: import of EUF4VALUES completed (34 rows)
    (IMP) INFO: import of EUFUNC completed (76 rows)
    (IMP) INFO: import of EUIMPORT completed (47 rows)
    (IMP) INFO: import of EUINFO completed (2772 rows)
    (IMP) INFO: import of EUINFOLI completed (0 rows)
    (IMP) INFO: import of FUSEQDIR completed (0 rows)
    (IMP) INFO: import of GUIDIR completed (0 rows)
    (IMP) INFO: import of GUIDIRT completed (3 rows)
    (IMP) INFO: import of GUINODE completed (0 rows)
    (IMP) INFO: import of GUINODT completed (0 rows)
    (IMP) INFO: import of ICON completed (982 rows)
    (IMP) INFO: import of ICONP completed (149 rows)
    (IMP) INFO: import of ICONT completed (3361 rows)
    (IMP) INFO: import of ICO_P completed (0 rows)
    (IMP) INFO: import of LDBS completed (0 rows)
    (IMP) INFO: import of MAPPARAREF completed (0 rows)
    (IMP) INFO: import of MODACT completed (0 rows)
    (IMP) INFO: import of MODATTR completed (0 rows)
    (IMP) INFO: import of MODIDIR completed (0 rows)
    (IMP) INFO: import of MODSAPA completed (2049 rows)
    (IMP) INFO: import of MODSAPT completed (3991 rows)
    (IMP) INFO: import of MODTEXT completed (0 rows)
    (IMP) INFO: import of O2APPL completed (164 rows)
    (IMP) INFO: import of O2APPLT completed (305 rows)
    (IMP) INFO: import of O2PAGCON completed (4120 rows)
    (IMP) INFO: import of O2THEMEREL completed (0 rows)
    (IMP) INFO: import of O2THEMES completed (1 rows)
    (IMP) INFO: import of O2THEMEST completed (0 rows)
    (IMP) INFO: import of O2XMLDESC completed (89 rows)
    (IMP) INFO: import of O2XSLTDESC completed (163 rows)
    (IMP) INFO: import of O2XSLTOTR completed (0 rows)
    (IMP) INFO: import of O2XSLTTEXT completed (385 rows)
    (IMP) INFO: import of OBJ_DIFF completed (0 rows)
    (IMP) INFO: import of OXT_PICTURE completed (146 rows)
    (IMP) INFO: import of PACKCHECK_EXCEPT completed (131 rows)
    (IMP) INFO: import of PRICAT_FIELD completed (172 rows)
    (IMP) INFO: import of PRICAT_FIELDT completed (343 rows)
    (IMP) INFO: import of PROP_ELTYP completed (27 rows)
    (IMP) INFO: import of RLB_DB_LB completed (2 rows)
    (IMP) INFO: import of RLB_DB_LBT completed (4 rows)
    (IMP) INFO: import of RLB_DB_PR completed (31 rows)
    (IMP) INFO: import of RLB_DB_PRT completed (62 rows)
    (IMP) INFO: import of RLIB_CONT completed (0 rows)
    (IMP) INFO: import of RLIB_OBJS completed (1160 rows)
    (IMP) INFO: import of RLIB_TREES completed (5 rows)
    (IMP) INFO: import of RSEUINC completed (588382 rows)
    (IMP) INFO: import of RSEUMOD completed (49 rows)
    (IMP) INFO: import of RSEUTAB completed (0 rows)
    (IMP) INFO: import of RSMPCHECK completed (31 rows)
    (IMP) INFO: import of RSMPCHECKT completed (62 rows)
    (IMP) INFO: import of RSMPTEXTSI completed (0 rows)
    (IMP) INFO: import of RSNORMTXT completed (246 rows)
    (IMP) INFO: import of SDBUSRSET completed (0 rows)
    (IMP) INFO: import of SMODILOG completed (125 rows)
    (IMP) INFO: import of SMODILOGI completed (0 rows)
    (IMP) INFO: import of SMODIPROJ completed (0 rows)
    (IMP) INFO: import of SMODISRC completed (492 rows)
    (IMP) INFO: import of SMODISRCI completed (0 rows)
    (IMP) INFO: import of SMODITRAN completed (0 rows)
    (IMP) INFO: import of SMODIUSER completed (0 rows)
    (IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
      rc = 22, table "SPROXDAT"
    (IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be usedDbSl Trace: invalid sign in BCD number: 1
    DbSl Trace: Error converting decimal:  000000000200303.0 HEX: 0000000002003031 input variable# 12, proc: ## No proc
    DbSl Trace: invalid sign in BCD number: 1
    DbSl Trace: Error converting decimal:  000000000200303.0 HEX: 0000000002003031 input variable# 14, proc: ## No proc
    DbSl Trace: internal error in decimal conversion.
    (IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
      rc = 8, table "SPROXHDR"
    (IMP) INFO: import of SPROXINDX completed (0 rows)
    (IMP) INFO: import of SPROXKEY completed (0 rows)
    (IMP) INFO: import of SPROXREG completed (9 rows)
    (IMP) INFO: import of SPROXSET completed (0 rows)
    (IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of SPROXTST completed (0 rows)
    (IMP) INFO: import of SRESETLOG completed (0 rows)
    (IMP) INFO: import of SRESETLOG2 completed (0 rows)
    (IMP) INFO: import of SXC_ATTR completed (1045 rows)
    (IMP) INFO: import of SXC_ATTRT completed (1855 rows)
    (IMP) INFO: import of SXC_CLASS completed (1045 rows)
    (IMP) INFO: import of SXC_COCO completed (0 rows)
    (IMP) INFO: import of SXC_EXIT completed (1449 rows)
    (IMP) INFO: import of SXC_FCODE completed (11 rows)
    (IMP) INFO: import of SXC_FCODET completed (23 rows)
    (IMP) INFO: import of SXC_IMPSWH completed (2551 rows)
    (IMP) INFO: import of SXC_SCRN completed (47 rows)
    (IMP) INFO: import of SXC_TABLE completed (0 rows)
    (IMP) INFO: import of SXC_TABLET completed (0 rows)
    (IMP) INFO: import of SXS_ATTR completed (2093 rows)
    (IMP) INFO: import of SXS_ATTRT completed (4020 rows)
    (IMP) INFO: import of SXS_COCO completed (0 rows)
    (IMP) INFO: import of SXS_FCODE completed (64 rows)
    (IMP) INFO: import of SXS_FCODET completed (128 rows)
    (IMP) INFO: import of SXS_INTER completed (2093 rows)
    (IMP) INFO: import of SXS_MLCO completed (616 rows)
    (IMP) INFO: import of SXS_SCRN completed (80 rows)
    (IMP) INFO: import of SXS_SCRNT completed (141 rows)
    (IMP) INFO: import of SXS_TABLE completed (1 rows)
    (IMP) INFO: import of SXS_TABLET completed (2 rows)
    (IMP) INFO: import of SYS_COMP completed (0 rows)
    (IMP) INFO: import of TBPROGREF completed (251 rows)
    (IMP) INFO: import of TBVIEWER completed (0 rows)
    (IMP) INFO: import of TCG01 completed (9 rows)
    (IMP) INFO: import of TCP11 completed (1 rows)
    (IMP) INFO: import of TCP13 completed (0 rows)
    (IMP) INFO: import of TCP17 completed (0 rows)
    (IMP) INFO: import of TGLIF completed (534 rows)
    (IMP) INFO: import of THELPI completed (0 rows)
    (IMP) INFO: import of TMCRT completed (303 rows)
    (IMP) INFO: import of TMEMO completed (0 rows)
    (IMP) INFO: import of TRANSFDESC completed (0 rows)
    (IMP) INFO: import of TRANSFTEXT completed (0 rows)
    (IMP) INFO: import of TRDIRE completed (32350 rows)
    (IMP) INFO: import of TREELOG completed (15990 rows)
    (IMP) INFO: import of W3HTMLT completed (1138 rows)
    (IMP) INFO: import of W3HTRCT completed (162 rows)
    (IMP) INFO: import of W3JSCRT completed (0 rows)
    (IMP) INFO: import of W3MIMET completed (361 rows)
    (IMP) INFO: import of W3OBJLOINF completed (0 rows)
    (IMP) INFO: import of W3PUBDIR completed (0 rows)
    (IMP) INFO: import of W3SERINTP completed (44 rows)
    (IMP) INFO: import of W3SERINTPT completed (63 rows)
    (IMP) INFO: import of W3SERVICET completed (156 rows)
    (IMP) INFO: import of WBCROSSGT completed (126383 rows)
    (IMP) INFO: import of WBCROSSI completed (5654 rows)
    (DB) INFO: disconnected from DB
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: job finished with 2 error(s)
    E:\usr\sap\PRT\SYS\exe\run/R3load.exe: END OF LOG: 20090808221726
    Regards,
    Vinay

  • An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)

    Hi,
    When i open my Password Reset portal then provide Username credentials in text box and click on next then asked the Securites Question Answers to me,i provide the correct Answers to the securites Question after this password reset portal asked
    me New Password and Confirm Password then click on next for resetting the password then gives below Error only for 2 Users. and all other users are working fine.
    An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000:)
    Regards
    Anil Kumar

    Anything in the event log?

  • Request xy in system xy: internal error 0000000040/ in spooler ()

    Hi SAP community,
    when I am running a customized COPA report in background I got the following error message when I am trying to access the spool (job itself finished successfully):
    <b>Request xy in system xy: internal error 0000000040/ in spooler ()
    Message no. SP01R 042
    Diagnosis
    An unexpected error occurred in the spooler.
    Procedure
    Write down the exact message text and notify your system administrator.
    A message of this type contains three variables:
    Internal error x/y in spooler: z
    x is the SY-SUBRC of the CALL module.
    y is the error number of the C library of the spooler. See also "RSPOE..." in "rspo.h".
    z is a more detailed description of the error and may contain information about what the user can do (for example: try again later, end session, and so on).</b>
    Thanks in advance for your support.
    Best regards,
    Chris

    Hi SAP community,
    It appears that certain spool requests can not be displayed because of format restrictions. 
    OSS note 186603

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).

    I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
    It then gives me an error log of ;
    2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
    2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
    2015-04-23 14:44:06Z: Info: Exitcode = 0
    2015-04-23 14:44:06Z: Info: Logging ended.
    I have installed this software succesfully on other machines previously.....

    Hi RyanWelsh78,
    This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
    Thanks for your understanding.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • PS CS5 The operation could not be completed. A file system I/O error has occurred

    Howdy...
    I'm using Photoshop CS5 and when I go to use a handful of filters such as Liquify or Lens Correction I am suddenly getting an error message saying:
    "The operation could not be completed. A file system I/O error has occurred"
    Doesn't matter if it's a massive file or a small one. Sometimes the Liquify box will actually come up, but after I make one or two strokes, the beachball comes up and moments later I get the error message again. It doesn't actually crash PS, it just prevents me from using those filters. Each time I click, the error message comes up again. I've also tried it with my PS CS3 on the same Mac and it does the same thing. However on my 4 year old MacBook Pro, it's absolutely fine. Grrrrr!
    I have my PS set as default on 64 bit. I have a scratch disk with nearly 500gb free (which is not my start-up disk) I am running a Mac Pro 2.8 GHz 8 Core Intel with 16gb of ram, so it's not a memory problem. Running Mac OS 10.6.7 but did the same on 10.6.6 too.
    I have repaired the disk permissions on the start-up disk. I have reloaded a fresh copy of PS (a few times). Even did a hard Un-install with maccs3clean after trying a regular Un-install with no success.
    I had an 1.5hr conversation with an Adobe Tech guy earlier today and he's scratching his head, so I'd thought I'd throw it open to you guys hoping someone has had the same problem and can save the rest of my hair from being pulled out.
    HELP!

    Hi Guys,
    I know this is an old post but I need to bump it.
    I work for a image processing company and we all sit on top spec mac pro's with 16-32 GB of RAM, top graphic cards and SSD drives.
    All of my collegaues' computers are working fine when it comes to using liquify and all of the filters that come with CS5, but it sure doesn't work on my mac at all.
    We have a tech guy who has re-installed the OSX on a new SSD drive now two times and we have started from scratch with installing CS5 but it still will not work. I keep getting "the operation could not be completed..." every time i try
    to liquify or do any other filter work.
    I am 100% sure it doesn't have to do with any disk permissions or broken drives in my case.
    Could there be an issue with the graphic card or any other hardware component since it's clearly not a software related issue?
    Any help would be much appreciated because we are very much in the dark here.
    Best regards,
    Anders

  • How to change the "Page Flow Error - Unsatisfied Role Restriction" page

    When you try to access a page and are denied authorization to it, Weblogic automatically redirects you to a
    "Page Flow Error - Unsatisfied Role Restriction" page, on the bottom of which tells you what roles you have to be in in order to access the resource. My question is how can I change this page to match the general look and feel of my application?

    I know you asked this almost a month ago, so you may have already figured it out... but you just need to add a handler for com.bea.wlw.netui.pageflow.UnfulfilledRolesException. Something like this:
    @jpf:catch type="com.bea.wlw.netui.pageflow.UnfulfilledRolesException" path="roles-error.jsp"
    You can put it at the class level of a specific page flow, or at the class level of WEB-INF/src/Global.app, which will apply it to all page flows.
    Hope this helps.
    Rich

  • After system restore ,we are not able to activate the windows,while login to systems getting an error 0x800700B7

    after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7
    Cont-8096688758

    hi Jain,
    you may need to check the transfer structures,
    right click infosource and 'change', click 'comm.structure'/expand,
    click 'transfer', move the 0BASE_UOM from left to right side,
    or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
    hope this helps.

Maybe you are looking for