System does not allow to me to change collect method in RZ20

Hi.
I Have the problem with my SAP R/3.
I have productive, based on 4 application servers. In RZ20, alerts of MTE Operating System for one application server is not work. In nodes properties I have collect method "CCMS_Cpu_Collect_c". On other application servers - "CCMS_OS_Collect". System does not allow to me to change collect method
What will I do? Please help me.
Edited by: Viktor Unsub on Jul 18, 2008 4:55 PM

Hello Victor,
the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
If the MTE doesn't display data you should check if the agent is running.
Regards, Michael

Similar Messages

System should not allow to do the changes in PO once the ID created.

Hi All,
Once the Inbound Delivery is Created based on the Purchse Order, System should not allow to do the changes in the Purchase Order like Deletion of Item, etc..
Any Configuration Changes is avaliable. ?
Regards,
Sudhakar

Dear,
Please check the staus in order
Current order status xxxx does not allow goods receipt (Message no. C6009)? is this the message?
This will not allow you to do GR for production order when you activate status profile "SAT1" in the production order. After that when you confirm order it will automatically assign next user status i.e. "SAT2" (if not assign it manually in CO02) it will allow you to do GR for that production order.
Regards,
R.Brahmankar

How to block a payment in F110, when the system does not allow us to block

Hi all
Blocking of a payment happens in the following areas :
1. In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
2. We can also block a vendor through Vendor master area
3. We can block a Vendor from paying through Xk05.
Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor. But the system does not allow me to block it. Why the system does not allow the block. Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
Can anyone help me out in this...
thanks and regards
SL

Dear,
Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
Regards,
Chintan Joshi

System does not allow to void the payment on same day

Dear All,
System does not allow to void the payment on same day in R12. e.g. If payment is made on 18-NOV-2010, system does not allow to void on 18th. We can void payments if void date is greater than payment date.
Please let me know if you have any information to void payments on same day.
Thanks in Adavnce.
Thanks,
Astik

Hello Victor,
the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
If the MTE doesn't display data you should check if the agent is running.
Regards, Michael

I am trying to manage my "Location Services" on my iTouch but the device does not allow me to make changes. The screen is muted indicating that changes cannot be made. Anyone experience something similar?

I am trying to manage my "Location Services" on my iTouch but the device does not allow me to make changes. The screen is grayed-out indicating that changes cannot be made. Anyone experience something similar?

Do you have any Restictions set? (Settings>General>Restrictions)

System does not allow to enter data into cube

Hello
I use BPS NW2004s. I created a layout and execute "enter plan data". I realized that system does not allow me to enter data. Why?
Alex

I guess your cube is not transactional. Try to switch it to transactional

The new maverick system does not allow me to watch Sky - Any ideas when this is going to be resolved?

The new maverick system does not allow me to watch Sky - Any ideas when this is going to be resolved?

Press the escape (esc) key to exit full-screen mode.

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

Start with reinstalling Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1 Access the App Store to download Mountain Lion or Yosemite. Mavericks is no longer available since the release of Yosemite. If you purchased Mountain Lion from the App Store, then you can redownload it via your Purchases page in App Store. If not, then you will need to purchase it from Apple;
Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

Kotoeri (japanese input system) does not allow input

I've been using Kotoeri to type in Japanese and it's been working just fine until recently. Now when I select Kotoeri and tried to type, the cursor disappears and what I type does not appear on the screen. If I type ten letters, one or two of those letters may show up, or none at all. Most times it freezes for a brief period. It's not just Japanese characters that are not appearing. Normally, two alphabets convert to one japanese letter, but even alphabets cannot be entered when I'm using Kotoeri. (Sorry - it's really hard for me to explain). My system software is up to date, and I've tried restarting but it didn't solve the problem. Any tips?

Great! I went to the link, which described the problem I was having in a much better way, and I followed the steps described there. I'm new to mac and still don't understand how it worked, but it did Now my concern is I will use the strategy for any and all problems, but I imagine there got to be some risks when I delete "preference" files, right? Oh, and I thought I searched for similar topics before I posted my question, but couldn't come up with anything. I must've done something wrong there, too. So my apologies for posting redundant question. Thanks for your help and patience; it was much appreciated.

System does not allow change to matrial master as there is open transaction

Hi,
I am trying to change an existing material master (MM02 of account view 1) to split valution, however, I encounter the following log message which prevent me to change the valuation category.
Message Log
The Valuation Category Cannot be Changed for the following reasons:
Production Order (basically IW33 PM refurbish order) already exist.
PlantOrderItem
1000-4018111--1
Suprisingly the PM order is closed and it has the following status:
CLSD, PCNF, DLV, GMPS, MANC, PPRT, PRC, SETC.
May I know how to resolve this so that I can update my material master to split valuation in accounting view?
Thanks.
Tuff

Hi
When you are getting error while changing the valuation category for any material in MM02, you can see one icon of display error, please click on that and here you can see all details about what you need to do.
Split valuation
Valuation Category change in accounting view in material master
Valuation type - Removal
http://help.sap.com/saphelp_470/helpdata/en/90/ba6228446711d189420000e829fbbd/content.htm
Hope this will help you to solve your problem
Regards
Praveen P C
Edited by: Praveen Chirakkel on Aug 2, 2011 11:34 AM

Well, i have a macbook and i had my iphone 3s but since it was old i just bought my iphone 5s but the problem is that i can not transfer music because i can not download the latest version of itunes because the system does not allow me so what can i do?

i mean it is the same brand i only use apple products, there should not be inconviniences like this being from the same brand, if it is a different brand like windows or whatever i understand but in this case is different i think

Contact Apple
http://www.apple.com/emea/support/itunes/contact.html

HT3180 I tried again later several times and am afraid the rental period will expire and will not be able to watch the movie. The system also does not allow me to re-purchase the movie.

I've rentented a movie and would like to watch it. Consistently I receive the message "an error occured loading this contnt ...try again later". I've tried over a long period several times but always receive the same message. Also, I tried to re-purchase the movie but the system does not allow this. It just confirms "you have already rented this movie". any suggestions. Can't I just cancel the rental since I have not even fully streamed the movie/

Likely network related
What is your current connection, use speedtest
Go to istumbler or netstumbler to get a report of the network, look for signal strength and noise
If on wifi try Ethernet
Make sure DNS is set to automatic (settings - general - network)

Does not allow to change source system in Variant

Hi Gurus,
I am creating a variant for the program RSIMPCUST, but it does not allow me to change source system name. It is showing me gray color. Do you how to fix this issue ?.
Thanks
Liza

Hello Liza,
Did you try my solution?
[Re: Change source system name in variant in BWQ]
There are solutions to change variants properties, but that particular program has the logsys parameter not able to change, so you cannot change the value of that variant (only with debug).
It's best to go for that solution I already provided to you...
Diogo.

System setting does not allow changes to be made to object LSYS

Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammed

Dear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding

System settings does not allow changes to be made to object

Hi,
In one of my test system, when i tried to change the object its displaying following error message.
System settings does not allow changes to made to the object.
I have checked the settings in se03, regarding modification objects of software components and namespace those are in state of modifiable for this namespace object.
I would like to know, how to change the object in the namespace.
Regards
Srikanth

Hi,
In SE06, in addtion to system status and component status, check the namespace status too.
It would be better if you know the namespace of the object you are trying to modify. Set it to modifiable and retry.
To find namespace, open the object in SE80 and check the attributes. It would show assigned package, namespace, component etc.
Regards,
Srikishan

System does not allow to me to change collect method in RZ20

Similar Messages

Maybe you are looking for