System does not automatically reconnect to wifi network after sleep/restart

My iMac G4 (2GB RAM, 10.5.1, AirPort Extreme) does not automatically reconnect to my wife network after waking from sleep or restart. I just recently switched the iMac from a wired to wireless set-up though the machine has always had the AirPort card. In wired mode, it always automatically found the network.
Network preferences have the "Ask to join new networks" checkbox selected. Below the checkbox it reads "Known networks will be joined automatically."
My wireless router is Linksys WRT150N, security type is PSK and encryption method is AES key.
Anyone have any suggestions?
Thanks!
bk

I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

Similar Messages

  • HT4628 My MacBook Pro does not automatically reconnect to Wi-Fi after sleep

    I have to manually Open Network Preferences and choose my home airport (or office network) every time that I wake up from sleep.  I would like to have it automatically choose the network.  Is there any way to fix this?

    Not I solution, but I am hoping a similar issue to provide more insight.  I am seeing your auto-connect issue, but I only seeing the issue on the first network listed in the preferred networks.  I recently switched the order of of my preferred networks, and the auto-connect failure was immediately switched to the "new" first network.
    To elaborate, I have never had issues with my home network.  However, a few days ago I switched my home network to the top of my preferred networks list.  Now I must always select my home network to connect.  Also, I was always having problems with my parent's network, which was first in the preferred networks list.  Now that it is second, I have no problems connecting to their network automatically, when waking from sleep or from a clean boot.
    I am still searching for other similar reports of this issue.

  • Wireless network does not automatically reconnect after sleep

    I have a Belkin wireless G+ mimo modem router network. When I wake the mac from sleep it does not automatically reconnect to my wireless network and i have to manually select the network from the airport icon in the menu bar and then it connects without having to reenter my secure password. How do i set the mac to auto connect to the network after sleep? There are about 6 other wireless networks in range which may be effecting this reconnection.

    In may case the network was already at the top of the preferred networks list.
    Based of of a hint over at MacOSXhints.com, here's how I fixed this problem:
    1. In the Network references pane, delete the Airport connection that does not like to reconnect.
    2. Click Apply and Quit the System Prefs app.
    3. Put the computer to sleep.
    4. Wake the computer.
    5. Go back in to the Network pref pane and re-add the Airport connection. Do not try to connect to the network at this time.
    6. Click Apply and Quit the System Prefs app.
    7. Use the Airport menubar app to connect to your network.
    8. Verify connectivity
    9. Put the computer to sleep.
    10. Wake the computer.
    11. Verify connectivity
    My machine now consistently reconnects when coming out of sleep or restarting.
    God luck!

  • Yoga 13 does not automatically connect to Wifi at times

    My yoga 13 does not automatically connect to WIFI at times thought it has been saved to automatically connect. It will connect after I click on the WIFI icon in the desktop and then it sees the WIFI network and automatically connects to it. Though it is not a big deal it is minor inconvenience that I have to click that icon at times when internet doesn't work. This shouldn't be the case for a laptop that retails over 1000 bucks. Any suggestions?

    This happens to me too. I haven't found a solution yet either.

  • Does not automatically connect to wireless network anymore

    Mac Book does not automatically connect to know networks any longer.

    Hi sashton,
    When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
    Avoid giving your wireless network a common name (SSID)
    http://support.apple.com/kb/HT4450
    If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
    Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
    Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Thanks,
    Matt M.

  • Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

    Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

    Fixing this is a two step process:
    1) System preferences > WiFi/Airport ...
    ... check [√] Ask to join new networks
    "Known networks will be joined automatically.
    If no known networks are available, you will
    be asked before joining a new network."
    2) Remove unwanted networks from the list of "known" networks under
    System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
    Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

  • TS4209 Macbook Air with OS X 10.8.2 not automatically connecting to known wifi network after sleep

    Macbook Air with OS X 10.8.2 not automatically connecting to known wifi network after sleep

    If you are using WEP as a security on your router that is why it won't connect. WEP is so old school and very insecure that Apple has made it so there WiFi cards won't connect to WEP. It might as well be wide open. You can try that. Take all security, WEP/WPA/WPA2, off your router and see if it connects.
    If it does then use either WPA or better WPA2.

  • Xerox Phase 6280DN printing does not work anymore over wifi network help

    Hello
    I am having recurrent printing problems within a WIFI home office network. After power-cuts (which occur frequently here) I can not print anymore from any computer in the WIFI network on a Xerox Phaser 6280 DN.
    The printer is seen in the printer list but after clicking print in the printer queue it says "looking for printer" and /or "printing". When I connect the printer directly to a Macbook Pro it will print. Today I have downloaded the latest version of the printer driver of beginning this year from the Xerox support site. However now I can not add the printer to the printer list because it does not show up as an option! I restarted the laptop but this does not help. I have also restarted the airport express and airport base station but no luck. I did so by unplugging and replugging.
    The Phaser is connected to an Airport express which talks to an Airport base-station. OSX is 10.6.3. Thanks for any help it is driving me mad.
    Helmuth van Es

    This is how to contact HP support: www.hp.com/go/totalcare (click on Printers & Monitors, there is a phone number on the resulting page).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Automatic reconnect to wifi network

    there is a way to automatically reconnect to a wifi network after the router has been switched on-off?
    that's because at home we have a wifi network and router automatically switches off for 1hr during the night, i leave my laptop online but when i wake up in the morning it's always offline cause when the router turns on again my mac won't connect automatically to the network and i have to do it manually!
    what can i do??
    thanks

    I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

  • IPhone 4 does not see my home WiFi network anymore.

    All of a sudden, a few days ago, my wife's iPhone 4 (initially with iOS 6.0.1, now with iOS 6.1) does not see anymore my home WiFi network (created by a Time Capsule), to which it connected automatically.
    This has worked flawlessly for years but now the home network (nothing has been changed to its configuration) does not appear in the list of networks seen by the iPhone 4 (mine, iPhone 5 - iOS 6.1 - has no problem at all) and when trying a manual connection I get an error message saying that the network was not found. When I tested, I was a feet away from the Time Capsule.
    I have turned the iPhone off and on again twice, to no avail. Just to try something, I created a new WiFi network from my iMac and it was immediately seen by the iPhone 4.
    I don't see what could explain these symptoms and what would be the cure.
    Help welcome
    Thanks
    Jacky

    No luck. It changed nothing to iPhone behaviour.
    Thanks anyway.
    Jacky

  • Having issues with my iphone 5 on wi-fi- does not automatically pick up wifi and doesnt remember passwords

    I just picked up my iphone 5 yesterday and I am having issues with wifi.
    When I tried wifi for the first time I selected my home network and entered in the password for the network and found out the following issues:
    1) if you turn off wifi or turn on airplane mode or off, and then turn on wifi again - the phone does not remember the network's password and I have to re-enter it evey time plus manually select it
    2) when wifi is on,  not automatically detected nor does it select my network on its own have to manually go in and select a network
    Help! Do I need to call Apple? Anyone else getting this?

    I just managed to figure out the problem here. What you have to do is manually add the network by selecting "Other..." and filling in the information instead of selecting the item from the list of networks.

  • My macbook air does not automatically connect to my network when i go on safari

    I just replaced the hard drive in my macbook air, now when I try to log on to safari, it says I am not connected to my wireless network and I have to go to system preferences and pick my network and log on. Even though I lock the changes after I log off and come back I have to do it all over again. Any suggestions?

    WiFi, Internet problems, possible solutions

  • Powerbook g3 will  not auto reconnect to iMac airport after sleep

    iMac is a late-2006 intel, airport extreme. I'm internet sharing. If the powerbook sleeps, it will not auto-reconnect after waking. I can't even enter the password to reconnect; it displays an error message. I have to turn off-and-on the iMac's airport, and then the powerbook auto-reconnects.

    Welcome to the discussions, Dan!
    If the powerbook sleeps, it will not auto-reconnect after waking.
    The AirPort Extreme is "always on", there are no "sleep" related adjustments on this device. The "sleep" issue is with your powerbook or the operating system that the powerbook is using.
    Suggest that you post in the PowerBook Forum for your specific question.

  • No Wifi Networks after Sleep

    I'm running Mavrics for a while and all has been good. But lately after long sleep on my Macbook Pro (17" early 11) no wifi networks are available on the interface list. When I restart, they re-appear (most of the time).
    I've tried creating a new network location, turned wifi on and off, even deleated the preferences in the library, but no luck.
    I'm an engineer and this has got me stumped.
    Thanks in advance!

    To see if you computer even needs this fix, I would suggest you click on Software Update...
    It will show up in Software Update if your computer fits the specs for the update.
    The Software Update version is only 1.3 MB
    The other download directly from Apple is 25.81 MB
    big difference even if a person has 3 to 5 computers the Software Update will take less time.

  • Every time my IMAC is unused for a period, then goes to sleep mode, it loses it's wireless connection and when I wake it up, it DOES NOT automatically reconnect. I have to go to systme preferences network and request that it reconnect.

    My iMac is set up wireless.  Everytime it's allowed to go in sleep mode, it loses wireless connectivity.  Then, when I wake it up,  I must go to System preferences,  Network,  and request it to reconnect to my home wireless network.   It always does this successfully, but it's quite annoying that it seems unable to achieve this on it's own.  My iPad 2 and kindle can do this,  why not my iMac?

    This appears to be a known issue, there are a couple of things both of you should do, first file a bug report in www.apple.com/feedback.
    The next thing is more a work around than a fix. Instead of putting your computer to sleep just put the display to sleep. You will find this in System Preferences - Energy Saver. Set the computer sleep to Never and then set the display sleep to what ever time you prefer.

Maybe you are looking for

  • How to get the value in the XML tag?

    hi all, i am new to JAXP. i tried the sample program provided in the following link. it just counts the number of tags in the XML file. XML file name is given as command line argument. Now, if i want to display the value in the XML tag( say <NAME>xxx

  • Confusion about mixing frame rates......

    what are these guys talking ....does this happen automatically that fcpx adjusts variable frame rates according to the project settings..? https://discussions.apple.com/thread/4505699 because it did not happen with me in a  23.98 timeline the clips w

  • Adobe - Error executing program

    Hi, When I am executing the WebDynpro program DEMO_ADOBE_OFFLINE I am getting the following error in the log file ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [sap.com/com.sap.lcr*sld : LcrClassWriter]. We have done t

  • Logic is not clicking

    Hi, In my office we have implemented a new system in Oracle 10.2.0.3 and from some time we are facing a new logical problem.. We have a table SQL> desc MPR_TABLE_DETAIL Name Null? Type GAMEID NOT NULL NUMBER(10) TABLEID VARCHAR2(10) PLAYER1 VARCHAR2(

  • Syncing 2 ipads with different users

    I play in a band using ipads ( 3rd gen) I want to sync the ipads (2) so we can share the same music simultaneously and change music using either as the control. Possible?