System does not boot during Hyper V installation

Hi -
I was trying to install Hyper V on my Windows 8.1 professional edition, 64 bit OS. The installation was through ISO downloaded through MSDN. During installation I had to hard boot my system through switch off. Now my system does not boot correctly and during
boot it flashes a message "The last windows installation did not complete please install the setup". Does this mean that my existing 8.1 OS has crashed ? how can i come out of this and recover my data ?
My hardware configuration is :
i7 processor, 16GB RAM, intel graphics Card, windows 8.1 professional 64 bit OS.

Hi RahuIM,
You can try to enter safe mode then copy your personal data to the data volume then reinstall the system.
The related KB:
Start your computer in safe mode
http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
Step-By-Step: Enabling Hyper-V for use on Windows 8.1
http://blogs.technet.com/b/canitpro/archive/2014/03/11/step-by-step-enabling-hyper-v-for-use-on-windows-8-1.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • After installation of 10.6.5 system does not boot

    After I updated my system with the latest release 10.6.5, the system does not boot up at all. It shuts down every time it restarts. All I can do is go into single user mode and then I cannot repair the disk as I always get the error that "The volume Macintosh HD cannot be repaired when it is in use"
    Any other suggestions?

    It sounds like your friend's DVD is hardware specific to his Mac and will not work in your Mac.
    Since you say a safe boot work that generally indicates that the problem is with third party software because the safe boot prevent any of that from starting.
    Allan

  • System does not boot when PCIe express Card is inserted in system. Using Spartan-6 PCIe Integrated Endpoint Block 1.3

    Hi,
    I am using Spartan-6 PCIe Endpoint Block core v1.3 and I am using ISE 12.1. I have used the PIO example design,
    modified it according to our design.
    The core is configured as below:
    BAR0 - 8KB, 32-bit, Memory Type
    Lanes - x1
    Clock - 125 MHz (system clock)
    The card is a custom board. When the card is pluged into the system the system does not boots, it hangs.
    I have tried debugging using chipscope and monitored trn_lnk_up_n, trn_reset_n and trn_clk. trn_lnk_up_n stays
    high (deasserted), trn_reset_n stays low (asserted), trn_clk is low (No clk).
    What might be the issue?
    Thanks & Regards.

    Thanks Gabor, for the response.
    I refered couple of answer records like AR# 34873 and AR# 34894, I monitored trn_reset_n, sys_reset_n, clock_locked, PLLLKDET and RESETDONE signals as suggested in AR# 34894.
    Status as follows:
    SYS_RESET_N = 1 (deasserted)
    TRN_RESET_N = 0 (asserted)
    CLOCK_LOCKED = 0 (deasserted)
    PLLLKDET = 0 (deasserted)
    RESETDONE = 0 (deasserted)
    which means the transceiver PLL frequency is not within the predetermined tolerance. Is this problem related to the PCIe Jitter Attenuator I am using on the board to derive 125MHz from 100MHz system Clock.
    Thanks & Regards

  • V210 alom starts up; status is alright but system does not boot

    I have a series of v210s, all running solaris 9.
    After a power down on of the systems powers on alright. showenvironemnt
    shows
    r4n8mgt> showenvironment
    =============== Environmental Status ===============
    System Temperatures (Temperatures in Celsius):
    Sensor Status Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard
    MB.P0.T_CORE OK 51 -- -- -- 110 115 118
    MB.P1.T_CORE OK 60 -- -- -- 110 115 118
    MB.T_ENC OK 15 -6 -3 5 40 48 51
    Front Status Panel:
    Keyswitch position: NORMAL
    System Indicator Status:
    MB.LOCATE MB.SERVICE MB.ACT
    OFF OFF OFF
    System Disks:
    Disk Status Service OK2RM
    HDD0 OK OFF OFF
    HDD1 OK OFF OFF
    Fans (Speeds Revolution Per Minute):
    Sensor Status Speed Warn Low
    F0.RS OK 7336 -- 1000
    F1.RS OK 7180 -- 1000
    F2.RS OK 7180 -- 1000
    F3.RS OK 7336 -- 1000
    MB.P0.F0.RS OK 17307 2000 2000
    MB.P0.F1.RS OK 17763 2000 2000
    MB.P1.F0.RS OK 17307 2000 2000
    MB.P1.F1.RS OK 17307 2000 2000
    Voltage sensors (in Volts):
    Sensor Status Voltage LowSoft LowWarn HighWarn HighSoft
    MB.P0.V_CORE OK 1.44 -- 1.26 1.54 --
    MB.P1.V_CORE OK 1.50 -- 1.26 1.54 --
    MB.V_VTT OK 1.28 -- 1.17 1.43 --
    MB.V_GBE_+2V5 OK 2.50 -- 2.25 2.75 --
    MB.V_GBE_CORE OK 1.20 -- 1.08 1.32 --
    MB.V_VCCTM OK 2.55 -- 2.25 2.75 --
    MB.V_+2V5 OK 2.58 -- 2.34 2.86 --
    MB.V_+1V5 OK 1.51 -- 1.35 1.65 --
    MB.BAT.V_BAT OK 2.90 -- 2.70 -- --
    Power Supply Indicators:
    Supply Active Service OK-to-Remove
    PS0 ON OFF OFF
    Power Supplies:
    Supply Status Underspeed Overtemp Overvolt Undervolt Overcurrent
    PS0 OK OFF OFF OFF OFF OFF
    Current sensors:
    Sensor Status
    MB.FF_SCSI OK
    r4n8mgt>
    However the system does not boot, or show any diiagnositics.
    I connected a serial to the "serial management port" but all i get is
    C Alert: SC System booted.
    SC Alert: Host System has Reset
    [SC Status 7fff - OK] Enter #. to return to ALOM.
    Copyright 2004 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    Sun(tm) Advanced Lights Out Manager 1.5.2 (m1104)
    Please login: admin
    Please Enter password: ********
    r4n8mgt> console -f
    Enter #. to return to ALOM.
    Here it sits and does nothing.
    Any idea?
    Lydia

    That sounds like a failed logic board or display module on the logic board...either way you need to take it to an Apple store genius bar and have the techs test it to see exactly what has failed.  The testing is free so give the techs a chance at diagnosing the problem.

  • Reset Password - System does not boot from DVD

    My System: Macbook Pro - 2Ghz Intel Core Duo - OS X - 10.6.8
    Hi everyone,
    i forgot my password. So i want to boot from install DVD to reset the password. Unfortunately my macbook pro does not boot from DVD (10.6.3).
    I press c all the time...but sometimes the macbook pro throws the DVD out...and sometimes nothing happens.
    The DVD drive is working fine...
    Any other idea?
    Thanks in advance.
    Fabian

    So when you boot holding option it shows a padlock with a password field? Is that correct?
    In that case we're talking about the firmware password, which you can't reset via the install disk. There is only one way to do this, I'm not certain if one is allowed to divulge that information publicly - might want to try googling "reset firmware password"

  • New system does not boot properly

    I just set up a new system with:
     a MS-6728 Neo2 FIS2R Mobo,
    1gb Geil PC-3500 RAM (2x512),
    2.6C proc.
    2 Maxtor 120gb IDE drives RAID 0 with the onboard promise controller.
    Lite-On DVD burner
    ATI radeon 9800 video card
    Enermax 300 watt power supply with:
    3.3v - 28amp
    5v - 30amp
    12v 22amp
    170watt total 3.3/5 combined
    My problem is that my system NEVER boots up normally.  It always freezes in the bios startup.  The D-bracket stops at almost every possible combination of led's, which according to the manual the problems were:  Testing RTC, Initialize Video interface, Testing memory, Initializing floppy controller, Memory detection, Decompressing bios to ram, possibly more.  Sometimes I also just get beeping, either a continuous beep or 8 beeps.  A few times it would display the bios startup screen, but halfway down would be gibberish characters and would be locked up.  When I then turn the computer off then on again, the bios is reset at least somewhat(i know because I usually disable the full screen image on startup) and says memory timings are too tight, and I have the choice to enter bios or hit any key to automatically fix things.  If I hit any key it will boot up ok.  However when I restart/turn off the computer, the next time it again does not boot.  I tried upping the ram voltages from 2.5-2.9v, and that seems to stay that way in the bios, even when it resets itself.  Everything else is set to auto/slow.  If I try to manually adjust the memory timings, even to the slowest possible settings, it does not boot, and I must turn it on/off a few times till the bios resets again, with the boot process stopping at one of the possiblilitys mentioned above.    Using the info tab on speedfan, I got the memory info, and it displayed the voltage at 2.5v, not sure what that means but it is strange.  
    What I have already attempted:
      I sent back the ram and got a new set, which hasn't changed anything.  The first time the other ram failed memtest, this time it passed(for about 2 hrs).  So I don't think its the ram.  
      I borrowed an antec truepower 430w powersupply, which had no effect.  
      I went back to bios version 1.3 from 1.9, which also seems to have no effect.  
    I was hoping to overclock the system a bit and enable performance mode etc etc, but now I'll be happy to just not have to go through a song and dance everytime I restart the computer.  This is only the second computer I have built from scratch, and the first with raid, but that seemed to all go ok.  Please help me diagnose the problem!

    I too am having problems with my system.
    865PE Neo2-FIS2R
    2 Maxtor 120GB S-ATA drives, RAID 0, Promise
    2 512MB Geil Ultra CL2-3-3-6
    HP CD-RW
    What IDE settings are you using?
    E.g...Native? P-ATA Only...all of those settings
    For me...sometimes XP will install and boot...but eventually system is unstable and XP crashes and corrupts itself...Event Manager errors different each time
    Someone mentioned problems with Maxtor and AMI BIOS...anything I should keep in mind?
    Sorry about all the different questions.  I'm sure exactly where my problem lies.  MSI thinks it may be my memory AND/OR on-board IDE controller since I can't get the on-board Intel RAID setup to consistently "see" and setup my RAID drives...even when it has worked...XP doesn't like the Intel configured RAID drives.  Also tried just one S-ATA drive through on-board Intel and Promise.  Next I will try a plain old IDE Hard Drive...no S-ATA...and make sure my memory passes memtest86+ testing.
    Any other gems you can offer for this config???  Thanks.

  • Single-User Mode Copying Files/System Does not Boot Past Apple Logo Screen

    I have a Macbook 2.0GHZ, 2GB RAM, that recently tried to download a secuirty and keynot update. Following the download the system will no longer boot past the Apple Logo Screen with the spinning wheel. I do not have access to a OS disk yet or to a firewire cable either. I've have seen posts from others that describe how to use traget disk mode to reinstall the secuirty update manually and then they can boot their computer. Safe mode will not work. I did boot into single-user mode and run the disk utility there and it says my HD is OK. Since I do not have a firewire or an OS Disk, I am wondering if there is a way to copy those files i need to a USB pen stick then install them onto the computer via single-user mode, considering this is the only way I can boot and manipulate the machine at this time. If this is not possible please let me know so I can find a way to scrounge up a firewire cable or disk. Thank you in advance for any assistance.
    Ted K

    Thanks to Limnos and BDAqua I know you guys have helped others with these kind of problems from the other posts I read. I just want to list what I did exactly in case anyone wants to try to do this with a usb drive or does not have access to a boot disk or firewire cable.
    1: Install security update on a pen drive
    2: Boot in single user mode, CMD-S on startup
    3: /sbin/mount -uw /
    4: mkdir /Volumes/usb (usb can be any name, name of usb drive or anything you want)
    5: ls /dev (you need to get the drive listing for the usb drive to mount it appropriately, it should be disk#s# but this is close to what the HD and Cd drives are listed as so you may need to list once before you put the usb stick in and once ater. I had issues inserting the usb drive in single-user mode and it would freeze up the root drive)
    6: /sbin/mount_msdos /dev/disk1s1 /Volumes/usb (this mounts the usb drive, i had to use msdos because of how my usb drive was formatted, you may need to check your usb drive format, hfs is the apple format for usb drives but it did not work for me)
    7: cp /Volumes/usb/SecUpd2009-001Intel.dmg (this copies the files from the usb drive to the root drivel, at this point you no longer need the usb drive)
    8: hdiutil mount /SecUpd2009-001Intel.dmg (this mounts the disk image)
    9: cd /Volumes/"Security Update 2009-001" (after i mounted the image this is how it appeared in the Volumes directory, you might need to do ls /Volumes to get the name, the quotes are important to get the whole file directory changed)
    10: installer -pkg SecUpd2009-001Intel.pkg -target / (this installs the acutal update, i used the SecUpd2009-001Intel.pkg and it worked though I think you might be able to use "Security Update 2009-001" with quotes as well.)
    11: reboot
    i hope this helps anyone looking to do this. Thanks again to those who helpes and all the other posts that had information that helped me identify and then fix my issue! I still love my mac.

  • Windows 2008 R2: SLES 11 Sp3 Guest converted from Vmware OVA to VHD, does not boot on Hyper-V: could not find /dev/sda4

    Hi
    I have a VMWare OVA file with Guest OS as SLES 11 Sp3. I have converted this file from OVA to VHD using Microsoft Virtual Machine Converter Solution accelerator. On first boot of this VHD on Windows Server 2008 R2 - Microsoft Hyper-V I get an error that
    "Waiting for device /dev/sda4 to appear..
    Cannot find /dev/sda4"
    I have not even booted this VM once on Hyper-V, and hence not installed any Linux integration Services yet.
    What could be the possible reason for this failure? Any suggested solution?
    Thanks
    Ashwini

    Easiest way (and also applies to Hyper-V 2012 R2):
    Ok, following properly (originally missed the step to mount the root directory of the converted VM as "/mnt" )
    http://nwrickert2.wordpress.com/2011/10/24/rescuing-susie/
    Then once chrooted
    mkinitrd -d /dev/sda2
    generated initrd from kdump WITH Hyper-V drivers & VM is usable!
    http://forums.opensuse.org/showthread.php/476780-boot-failure-mkinitrd-does-not-understand-that-dev-sda-has-become-dev-sde
    Can't believe that it was so painful to find the right info easily
    Just to finish it off, after converted machine boots fine, there is a small
    matter of removing tools & fixing networking as per links below:
    https://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.upgrade.doc%2FGUID-6F7BE33A-3B8A-4C57-9C35-656CE05BE22D.html
    http://www.vcritical.com/2010/10/getting-eth0-back-in-a-sles-for-vmware-clone/
    All done!!!
    Also (unsupported), but works fine is SLES 11 SP1

  • Can´t enter bios setup/system does not boot

    Hi,
    I got a problem with my new KT6 Delta MS-6590 board.
    Sometimes after a prog is crashed and its better to restart windows, my System doesn´t boot anymore. It hangs after searching RAID-Disks. The Broadcom Dialog does not appear and the System stands. When I try to reset and would like to get into the bios setup I can´t enter it. The Delete Key do not work. After clearing cmos and going on with default values the systems works correctly until the next crash.
    The bracket says "Boot attempt"
    Whats the problem please help  ?(

    Read "KT6-LSR and installing Windows on SATA" post (At this moment is the last in this page). There you'll find many posts about Raid problems.  8)

  • Satellite P100-160 - System does not boot

    Hi all,
    i was hoping someone may be able to help me out with a problem i have with my Satellite P100-160.
    I was using it the other night without power connected when my battery ran out and it shut down.
    When i re-connected the power and switched it on i got the usual message asking if i wanted to re-start as normal which i did.
    Upon doing this i got the icon in the bottom right corner telling me the system was looking to install a new driver for mass storage device.
    It could not find it and i have not added or taken anything away from my system.
    When i shut it down and went to re-start it next time i got a message on boot screen along the lines of:
    error
    resource conflict - pci serial bus controller on motherboard bus: 0A, device: 04, Function :01
    error
    resource conflict - pci mass storage controller on motherboard bus:0A, device 04, function 02
    error
    resource conflict - pci on motherboard bus: 0a, device: 04, function 03
    press F1 to resume F2 to setup
    i can get into setup but when i resume the system just hangs and all hard drive activity stops. i have managed to get it to boot successfully once but no more, cant get into safe mode or anything. when i took it to my local computer shop the guy there looked at the error and said it is broken, the motherboard has gone and there is nothing i can do with it. im quite disappointed as the laptop is only 2 years old and i would have thought it would last longer than that.
    So my question s are is the guy right, is it broken or is there something that can be done with it? if it is broken can i access the contents of my hard drive with another laptop (the shop guy said something about using a hard drive caddy and using it as an external hard drive??
    thanks in advance for any advice
    D

    Well it would certainly seem my laptop is a gonna, plenty of views but no solution. Must say from
    browsing this forum Toshiba laptops definitely have their fair share of problems, mine suffered from
    the broken cover mentioned in another thread but i did not think it was such a widespread problem. It has certainly put me off opting for a Toshiba as my replacement.

  • Bios update hung up, now system does not boot

    Hi,
    I just got my new system 2 says ago and installed a win 8.1 on it. My pc froze at random so I checked the website and saw that there was a bios update saying windows 8 users should update.
     I downloaded the file, ran it and it hung up in the middle, I left it for about an hour and it was still stuck there...I reset the pc and boom, it wont boot up. It just gives 2 consecutive beeps every 5-10 seconds or so. Is my mobo dead?  Please help! I JUST bought this case...
    EDIT:
    Sorry I was so upset that I even forgot to mention my mobo model:
    Mobo: 990FXA-GD80
    Bios version: I don't know!
    CPU: AMD 8350
    PSU: 630 thermaltake
    HDD: 1 TB seagate
    RAM: 8 gb kingstone
    VGA: Sapphire 280X

    msi have been told about Live update BIOS Updates being bad many times but they keep it in  !
    you have 3 options!
    1: have a shop that can do SPI BIOS flashes to direct flash the BIOS chip to revive the board!
    2: RMA it to MSI for them to re-flash the board!
    3: get a new board!
    1+2 or the cheapest routes to take! 3 is more expensive!
    (DO NOT USE LIVE UPDATE its dangerous as it does BIOS flashes in a uncontrolled environment (Windows) as there is other data and processes active) <-- if you do use live update just use the download function only and perform BIOS flashes in M-Flash, DOS or using the forum flasher as there much safer!

  • After updating the system does not boot anymore!

    I made an usual update with 'pacman -Syu' and since I saw a kernel update I rebooted...
    After reboot the lilo menu appears, it autoselects arch after 2 seconds, it appears
    boot:
    loading arch........................... .................................
    nothing more. No errors, no messages at all!
    It is the same also using the fallback.
    What happened? Can I do something or I have to reinstall arch from zero?
    edit: typo
    edit2: it can be related to the fact the I have /boot partition and lilo in different disks?
    Last edited by ezzetabi (2007-06-03 18:31:34)

    I see, so now I have to start the machine with the arch CD. Mount the drives, chroot the directory where I mounted and starting lilo should solve.
    Thanks everyone.
    edit: it worked! Thanks everyone.
    Last edited by ezzetabi (2007-06-04 06:38:09)

  • Windows Server 2008 R2 Does not boot When Back up drive removed

    I have a windows Server 2008 R2 Standard server RAID 10 installed.  I  have a non raid drive installed as the backup HD.  The Backup drive is now failing. When I went to switch it with a new one the system does not boot and is asking for
    a boot drive.  I have been searching for solutions and cannot find any.  Any ideas?

    Hi,
    Could you confirm if your boot volume is on that non-RAID disk (maybe 2 volumes on that disk and one of them is the boot volume)?
    At current situation, first please test to connect the failed disk back to the device and see if it will help.
    Or you may need to run a boot-up repair with an installation disk. 
    If you have any feedback on our support, please send to [email protected]

  • System will not boot / black screen

    :undecided:Problem: System does not boot.  Black screen.
    I just put this system together.   I've returned the CPU and motherbd. for exchange, thinking one may be defective.    Still No Boot.   PowerSupply checks out good.   MSI video card checks out good too.   Could it be the memory stick?   Pls. HELP.   BTW - Yes, I did remember to plug in the 4-pin power connector.
    Motherbd: MSI 865PE Neo2 (option2) (New)
    CPU: INTEL P4 2.4G 1 MB L2 533MH (New)
    http://www.newegg.com/app/viewproductdesc.asp?DEPA=0&description=19-116-141&ATT=Processors&CMP=OTC-B1zrat3
    Memory: 1 dimm - 1GB PC2700 333MHz DDR SDRAM
    http://www.ocsystem.com/1gbpc33ddrsd.html
    VGA : MSI Video Card - Geforce FX5200-TD128 128MB TV-Out DVI-I (Tested Good)
    http://www.ussa.com/ussaonline/product.asp?dept%5Fid=10610&pf%5Fid=100%2D106%2D1004159
    PowerSupply : Enermax EG365P-VE-FC 350W (Tested Good)
    HardDrive : 120GB WesternDigital

    You got me there.    I only looked at the LED's after it hangs.
    I must wait for my reshippment of my memory.   I returned it, and asked them to test it.    If it tested good, then it probably not compatible with system.   My next option was to order GIGARAM 1GB, since it is on the list of recommended DDR.
    Sorry, I cannot reboot at the moment.   Do you think it is the memory, or something else?
    Thanks,

  • HT4840 Boot camp does not boot to Windows 7 disk after completing disk partition - white blank screen

    After completing the partitionning of the hard disk, the iMac reboots but nothing happens. The system does not boot from the Windows 7 disk.
    A blank screen appears and that's all.
    I have tried to manually boot from the disk by pressing the <Alt> kei will restarting the iMac. The system display the option of booting from the iMac hard disk or the Windows 7 disk. Seelcting the Windows 7 option does noting.
    Thanks in helping me find a solution to my boot problem.
    Danarc54

    Are using a 64 bit version or a 32 bit version of Windows?
    I'm not up on the iMacs but according to this article you may not be able to use 64bit Windows.

Maybe you are looking for