System does not come back from suspend
Hi
when I suspend my laptop via ``suspend`` and press any button to restart, my
system just shows a black screen and is not responding to any input. The only
hint to determine that it is out of suspend mode is, that the disk is starting
and that the power leds are shining.
Please let me know if you need more info. I have no clue where to look.
Regards
Manuel
Hi Manuel,
I had a similar problem but only in KDE, in my case the keyboard was working because I could kill X (ctrl+alt+backspace) and also change to a terminal (ctrl+alt+F1). If it is the same for you then check my post.
Similar Messages
-
Error: ME is in recovery state (also does not come back from sleep)
Hi,
my name is Ifor and I bought a Lenovo X220 (4290-44G) exactly 2 years ago.
The following happened:
-I noticed an error while booting. The screen said: ME is in recovery state. After that I noticed my computer won't wake up from sleep after I closed the lid. So I installed a fresh windows 7 ultimate install. All the drivers have been downloaded from Windows Update or the Lenovo site.
The error still is not fixed, so I updated my BIOS with the newest .iso file from the Lenovo support site. The error still persists!
Also, my processor gets really warm and my screen sometimes flicker. I've had no problems or what-so-ever before.
All I found was this link and I updated my bios already: http://en.community.dell.com/support-forums/laptop/f/3518/t/19456189.aspx
I would be really grateful if someone could help me.
Kind regards,
IforSame problem with my T420. The Intel(R) Active Management Technology - SOL (COM4) doesn't work either.
Fresh windows 7 pro installed, latest BIOS from Lenovo, flashed CMOS, installed drivers with Lenovo system update software... -
My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???
Return it for a warranty replacement.
-
Host Command does not come back
Hi,
I have treid to export schema by pressing a button, (form designed in Form10gR2 and excute via Application Server R2. )
For this I have applied one by one these syntaxes
1) host ( 'cmd /C start "" "'|| exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
2) host ( 'cmd /C exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
3) client_host('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
4) WEBUTIL_HOST.NONBLOCKING('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
When my client/ user executes the command, session goes hang and application screen does not come back. If I execute the exp command directly from the Application Server Command Prompt then exp works.
Please help me, what is the syntax to get the dump wihtout hanging the session.
Database 11g Linux
Application Server 10R2 Window2003.
Developer 10gR2.
Client Windows , Explorer, FireFox etc.
Regards.
Priya.Hi Priya,
It is always a better practice to call a batch file using the host command instead of hardcoding the command inside form. Which would help you to modify the batch file for any changes, without re-compiling the forms.
In this case, create a batch script, which would set the ORACLE_HOME etc (to make sure the exp command is recognized, you need to add the DB ORACLE_HOME/bin to the PATH), and then call the command to export. You can also parameterize the batch script and pass the parameters from form, separated by space.
-Arun -
Vertex tax information does not come back to SAP
Strange problem that we are having.
We have a situation where the taxes calculated back from Vertex somehow does not come back to the billing document upon billing document creation. However, this problem seems to be rare and intermittent, but happens regardless.
The problem doesn't seem to be configuration because billing documents for the same customer and material are successfully calculated for tax. Also, if the incorrect billing document is re-billed, the taxes come in correctly. I already checked VK13 to make sure that all the condition types are coming in correctly.
Also, Vertex seems to have been able to receive the parameters that is used for calculating the tax as the Vertex log shows that the tax information was calculated correctly, but for some reason, this tax does not make it back to the billing doc.
Has anybody had this problem with Vertex?
ThanksPaul,
I read your problem and most likely there is addtional configuration that may need to change depending on the details of your SAP and Vertex deployment. You can reach me at Vertex to discuss this issue. Some addtional details about which version of SAP, which product and version from Vertex, how it is deployed, etc will be some of the items we can discuss. As an example, this could be a memory issue and you need to enable more listeners....sometimes this happens when the RFC gateway can't keep with the responses from the external system. Kevin Toner -
Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
Every time I unmute my iPad, the sound efx does not come back. I can hear my keypad and the on/off sounds but I can't here the sounds from deleting photos, clicking on apps that are on my iPad. It does this every time I unmute my iPad. Please advise.
Hello PearldiamondMD,
I was thinking of a few recommendations for you. I recommend our iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/#section_1. Start at section 1, if that doesnt fix it, then section 3, and if all else does not work, section 5. At section 3 I recommend closing ALL the apps.
Here is section 1 to get you started.
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
All the very best,
Sterling -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
MBP does not come back after hybernation
Hello everyone,
I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
When I turn it back on the second time, it boots up.
Anyone else have a problem with this?
Thanks for listening!
MarkHello Gweedo!
Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
http://discussions.apple.com/thread.jspa?threadID=1394449
I have been perusing through that topic and hopefully they will come up with a fix for this.
The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
I even have the 'smartsleep' installed.
Thanks for commenting everybody!
Mark -
Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
I'm using Firefox 30.0 and Windows 7 (64 bit).
Thanks.Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]] -
Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help
Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M. -
Hi, My iphone 5 loses the 3G connections everytime i go into tunnel and also to holland park and it does not come back untill i restart the phone? i dont know why is it happening?
Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H. -
Whenever I try to rent a movie, Apple TV buffers and does not come back. I am able to see other programs, but not able to rent movies. And the movie charge still goes on my bill.
Apple TV uses iTunes. The reason you can't rent through your ATV is because you can't rent movies through iTunes Canada. Sadly, as this is a user-to-user forum, no one here would know when or if rentals will come to Canada.
-
I am trying to change my mousepad battery. keyboard does not come back up
I am trying to change my mouse pad battery. have replaced battery. keyboard does not come back on.
If you continue and you lose everything, you will be able to download most of the content again for free as long as you use the same Apple ID. You can read this about downloading past purchases.
http://support.apple.com/kb/HT2519
But before you continue and lose everything, try this.
Eject your iPad, quit iTunes and restart your computer. Then launch iTunes and go to Edit>Preferences>Devices. See if you have mutliple iPad backups showing in there. If you have multiple backups, delete all but one of them. Also check the box at the bottom that turns off auto sync .... Prevent iPods ......Click OK and Then quit iTunes.
Connect the iPad again and launch iTunes. Right click on your iPad name on the left side of iTunes and select backup. See if the iTunes will create a backup. If it does, after it finishes, click on the Summary Pane on the right and click on check for update. Try to update again.
If it all goes OK, after you update the iOS you can back to Edit>Preferences>Devices and turn on atuo sync again - assuming that is how you want to sync. -
My network goes off and does not come back unless I switch off and switch on
I have a vodafone connection.
Whenever I go underground while traveling in train, my network goes off and but does not come back unless I switch off and switch on the phone... any suggestions???I would advice to perform a hard reset (holding Power button + Home button for at least 10 seconds until Apple Logo appears)
Maybe you are looking for
-
I purchased my PC because it came with Microsoft Office 2010 (so said the advertisement). I installed the Microsoft Office Starter as I was prompted. There was no option to select my OS otherwise I would've selected Windows 7 64 bit. I noticed the pr
-
ADD device in Audible...Zen xtra don't w
I have WIN98SE. I have a Zen Xtra 40gb. Latest firmware and drivers. Device manager sees Zen. I cannot get add device to work in Audible Manager (4.0). With the Zen connected, i do add device, and nothing happens. HELP!
-
After having a virus and restart my hard drive i can't download quicktime as usual
after having a virus or something and restart my hard drive i can't download quicktime player as usual.it appears that my computer or antivirus doesn't recognise the program or something like that.thanks
-
Office templates controlled by GPO error
Hi, we configured our Group Policy to force usage of office templates from specific path (Network). we created shared folder for read to everyone and configuredet policy, its looks working but every time the users try to exit they get popup that ask
-
Commandbutton onclick and actionlistener happen at same time
I started a thread previously with a similar issue, but the title of that thread really doesn't describe the current problem. Sorry for double posting, but I would delete that thread if I could. I have a command button as: <h:commandButton id="saveCl