System does not come up after homogeneous system copy

Hi there,
after a regular system copy of our Java-only Portal the system does not come up.
'startsap' warns with these messages :
Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/jdbdictionary/jddi.jar file stated but does not exist !
Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/antlr/antlr.jar file stated but does not exist !
Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/system/frame.jar file stated but does not exist !
and, yes , these really important directories do not exist - under /usr/sap/<SID>/JCxy/j2ee/cluster/server0 there is
only ONE directory , which is 'apps' .
database starts, but not the j2ee engine
OS :Solaris 10, Oracle DB
I'm confused (i did the system copy 2 times, because I did not believe what I saw ....)
Regards,
Ronny

>
Sunny Pahuja wrote:
> Hi,
>
> Have you done system refresh with sapinst ?? was it successful or not ?? Could you please paste dev_server, std_Server and dev_dispatcher logs here ?
>
> Thanks
> Sunny
Hi Sunny,
thanx for your answer.
There are NO logs, either dev_server* nor dispatcher.
the only thing I found were under the work-directory, the dev_jcmon says :
[Thr 1] Wed Oct 27 11:01:40 2010
*[Thr 1] *** ERROR => Can't attach to administration shared memory (rc = 3) [jcmonxx_mt.c 228]*
and the bootstrap says mainly that it could not find the framework :
[Thr 1] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 1] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2] JLaunchRequestFunc: Thread 2 started as listener thread for np messages.
[Thr 3] WaitSyncSemThread: Thread 3 started as semaphore monitor thread.
[Thr 1] Tue Oct 26 10:00:01 2010
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 1] CPIC (version=701.2009.01.26)
[Thr 1] [Node: bootstrap] java home is set by profile parameter
Java Home: /usr/java
[Thr 1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SPE/JC51/exe/jvmx.jar
That make 'sense', because there is nothing it could find ..
Regards Ronny

Similar Messages

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

MBP does not come back after hybernation

Hello everyone,
I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
When I turn it back on the second time, it boots up.
Anyone else have a problem with this?
Thanks for listening!
Mark

Hello Gweedo!
Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
http://discussions.apple.com/thread.jspa?threadID=1394449
I have been perusing through that topic and hopefully they will come up with a fix for this.
The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
I even have the 'smartsleep' installed.
Thanks for commenting everybody!
Mark

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
I'm using Firefox 30.0 and Windows 7 (64 bit).
Thanks.

Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???,

My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???

Return it for a warranty replacement.

Dbca does not come out after 100%

I have installed and configuredthe Oracle 9i Rel2 on RH Linux 9.
When I followed dbca steps to create a database, it does not come out after reaching 100%. I had to kill the process to end it. What could be reason? Because of this the init<SID> file is also not created.
Please explain
Mehul Trivedi

I have installed Oracle9i on RH9 and I was able to use
the dbca and really If your swap values in the OS are fine
I do know whatelse you can check.
If you want to create a database and the dbca is not
functioning you have another option ( Create it manually )
Chapter 2
Administrator's Guide Contents / Search / Index / PDF
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96521.pdf
Joel P�rez

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

Imac G5/Intel, OS 10.6., system does not start up after connecting new router

After connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode, were unsuccessful. I could not switch to another user. Restart is only possible at all from installation disc but thereafter problem remains the same.
What can I do?

And, what happens if you disconnect the computer from the new router? Are you able to do this, and what happens when you try it?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

J2EE Engine JC00 of SAP System did not come up after 200 seconds waiting fo

Hi,
In the process of installing SAP WEBAS for java, during the last phase of installaion I am getting this problem
J2EE Engine JC00 of SAP System EPD did not come after 200 seconds waiting for another 20 seconds.
my platform is
AIX 5.3
jsdk jsdk1.4.2 64 bit
Can any one help me out as I am stuck and getting no help from anywhere
pradeep

Hi Pradeep,
Check your trace files in the /usr/sap/<SID>/DVE.../work directory (dev_bootstrap, dev_disp, log_bootstrap etc..) for any errors preventing J2EE from starting.
It can be related to incorrect java path in the instance profile, incorrect JDK (see the OSS note # 716927).
You can restart J2EE engine via SMICM once you clarify the issue.
Regards,
Mike

Camera does not work correctly after op system update

UUpdated op system and now camera does not function. Reset pad and made no difference

There's more than one type of reset ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

HDMI does not come back after disconnect

Hello Archers,
this one is bugging me for a while now, perhaps someone has an idea.
I have a headless ARCH home server that mainly has the following purposes:
1. being a 24/7 file/backup/ssh server for family and friends
2. being an MPD server connected to my music system
The setup may seem a bit exotic. The computer is connected to the music system via HDMI over an S/PDIF audio extractor to the music system. This is because the machine replaced a RaspberryPi that really had crappy analog audio output and my music system has an optical input and can perform the digital to analog conversion itself. I have not installed Pulse just alsa and jack2-dbus.
aplay -l shows the following:
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC887-VD Analog [ALC887-VD Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
The Problem:
Whenever I switch off the music system and later switch it back on, the HDMI-connection is lost and does not get reestablished. I tried various things but essentially only a reboot of the machine helps (which opposes purpose 1 of the machine). On the RaspberryPi I did not have that problem, probably due to the hdmi_force_hotplug=1 in /boot/config.txt.
My Observations so far:
The first problem that made the sound disappear was the screen blanker on the console after 10 minutes. This can be prevented with
setterm --term linux --blank 0 >/dev/tty1 # You need write permission on /dev/tty1 for this to work!
There are no appearant error or warning messages when using e.g. aplay or speaker-test, just no sound at all
There are tipps in the forums/the internet sugesting to disable power management on the display involving xset and xrandr. However, I have no X running and the tools complain that they cannot find/open the display
In /proc/asound/PCH/codec#2 I find the HDMI codec to show the following as long as it is connected after a reboot:
Codec: Intel Valleyview2 HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862882
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3
Power: setting=D0, actual=D0
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=8, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x04 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02* 0x03
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560020: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02 0x03*
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02 0x03*
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
After disconnect/reconnect it changes to this:
Codec: Intel Valleyview2 HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862882
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
N/A
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power: setting=UNKNOWN, actual=UNKNOWN, Error, Clock-stop-OK, Setting-reset
Invalid AFG subtree
I figured that the problem is probably related to powermanagement, so I experimented with powertop. This resulted in a reduced consumption of 1W when idle, which is nice but did not solve the original problem...
The Questions
Is there a way to completely reinit the HDMI subsystem just like on a reboot?
Is there an option comparable to hdmi_force_hotplug=1 on the pi that forces the HDMI signal to stay up?
Thank You for Your time!
Best regards,
Lars

I can confirm what zofiel said. I have tested it by connecting a TV and HDMI reactivitated by switching from X to console. However, this option only works one time and requires X running in the first place, which I usually have not on a headless server, but it made me think: Obviousely the X server needs to activate the graphics in the first place. Then I came up with an idea for a really messy work around. I could try to remotely start X. Normally, this is not possible and you get:
% startx
/usr/lib/xorg-server/Xorg.wrap: Only console users are allowed to run the X server
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
You can force it to work:
sudo startx
You get lots of error messages, but HDMI audio is back, even if one kills the X process afterwards with Ctrl+C (Audio stops, but resumes two seconds later). The downside is that starting X with sudo messes up permissions with the x related files in your home directory and you will have problems to use startx afterwards, so it is probably better to use su instead of sudo. If root does not have a properly configured .xinitrc file then one can also just execute the desktop environment directly e.g., for XFCE:
su - root -c "startxfce4"
Then kill it with Ctrl+C and you should have HDMI Audio working.
So now I could pack this in a script followed by some command to kill it, but, well, it is an ugly workaround
Is there really no better way?

[Solved] System does not power off, hangs at "System Halted"

Not sure if this is systemd or kernel related, and after the recent round of upgrades it happens on one of my computers and not the other.
I'm using systemd and do have systemd-sysvcompat installed, but no daemons are started with initscripts.
When I power off from the KDE desktop using the poweroff icon in the tray, it gets to the point where it says "System Halted" on the console screen
but the computer does not power off. If I power off using the physical power button on the computer, exactly the same thing happens.
However, if I power off using "sudo systemctl start poweroff.target" it works perfectly.
How can I get it to work properly again in KDE or if I hit the power button? Why does it work perfectly on one computer but not the other?
Last edited by Zamboniman (2012-11-10 03:41:24)

Okay, this has now been solved. Thanks are due to bgc1954 and Trillby for pointing me in the right direction. Very much appreciated.
My search ability, usually very good, completely failed me on this one. However, a few hints was all I needed.
For the record:
To make the power button poweroff instead of halt: edit /etc/systemd/logind.conf and uncomment HandlePowerKey and make sure its value is set to poweroff.
To make kde poweroff properly, edit /usr/share/config/kdm/kdmrc and look for the [Shutdown] section. Ensure HaltCmd is uncommented and set to /sbin/poweroff.
As to why the behaviour was different on my other computer, for some reason the relevant kdmrc entry on that computer was commented out. Apparently that makes it work correctly. I don't know why they were different, as I don't recall changing either.

My Macbook Pro does not come on after powering off.

Lately when I power off my Macbook Pro overnight, it does not power on the next day. Also, now my background is no longer showing.

Hi ngros,
Here are some troubleshooting steps for your MacBook Pro not turning on:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
One of the items is to Reset the SMC. Afte you do that, set your Desktop background again and see if it stays through a restart.
Thank you for using Apple Support Communities.
Nubz

Samsung NP305V5A: Screen does not come back after resume

The issue: screen does not turn ON when resuming from suspend-to-ram. PC fans start working. I can even "gently" reboot the notebook, by pressing <Ctrl>+<Alt>+<F1>, then <Ctrl>+<Alt>+<Del>. But the screen does not work..
Note: resume worked with the Catalyst driver (but this blob has many other glitches...)
$ lspci | grep VGA
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]
Video driver: radeon
Kernel parameters: root=/dev/sda2 rw radeon.dpm=1
(note: radeon.dpm=1 helps a lot; before kernel v3.11 I could not use radeon at all)
/etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
Identifier "Radeon"
Driver "radeon"
Option "ZaphodHeads" "VGA-0"
Option "ColorTiling2D" "false"
EndSection
not sure if the following is usable, but still:
$ lsmod | grep video
uvcvideo 72900 0
videobuf2_vmalloc 3280 1 uvcvideo
videobuf2_memops 2343 1 videobuf2_vmalloc
videobuf2_core 28027 1 uvcvideo
videodev 111140 2 uvcvideo,videobuf2_core
media 11751 2 uvcvideo,videodev
i2c_core 24164 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
video 11196 1 samsung_laptop
usbcore 179880 6 uvcvideo,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid

Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

System does not turn off after halt after successful suspend-resume

I have the following problem: when I try to shut down my laptop after it resumed from suspend to ram. It seems to shut down normally until, at the very end, it reaches the system halted part (which you wouldn't even be able to read if the system would actually halt). I'm running an updated system, no testing, on an Dell Latitude E6400. The system shuts down normally if I don't suspend it.
Any ideas? What additional information do you need?

karol wrote:
iamsmrt wrote:It wouldn't accept keyboard input afterwards, not even magic keys.
I meant: turn off via 'sudo init 0' instead of 'sudo halt', not after.
Ok, wasn't sure. Isn't "sudo halt" effectively the same thing? How are they different?

System does not come up after homogeneous system copy

Similar Messages

Maybe you are looking for