System does not reset asset retirement date for Depreciation Area specific transaction after area has been deleted

Good day,
I needed to create a new depreciation area in a live system. The depreciation area would not post to the GL, but would be used for tax purposes in a currency other than the local currency. When creating this area the asset values were translated at the system exchange rate which did not agree with the values of the manually maintained tax register. I proceeded by creating new transaction types that would only post to the new area, one of which was an asset disposal transaction, which would be used for downward adjustment of the APC value. I made my adjustments at the end of the previous financial year, but had to start over and proceeded to delete the depreciation area to allow me to start over.
After reinstating the depreciation area, my original adjustments were removed, however the assets which APC values needed to be adjusted downward using the disposal transaction, was giving me the AA 478 Posting transaction is not possible (value date not allowed) error.
I've reviewed the asset postings and there is no record of my original adjustment documents. The problem seems to be that field ANLA-ABGDT (Last Retirement Date), is still indicating the date of my previous adjustments and that this was not updated when the Depreciation Area was deleted and reinstated.
Again, I do not have any documents which I can access or reverse to update this table. Is there any way to clear this field without reversing the disposal document?
I'm also looking at implementing SAP note 1618286, to make error message AA478 a warning. I could not implement SAP note 533378 since it only supports component version 46c and we are currently running component verson 605.
I would appreciate your consideration of my problem.
Regards
Marius

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Similar Messages

Your system does not meet the minimum requirement for this update (9996)

Hi
recently had to reformat my system with windows 7 profesional. All windows updates where performed and all the drivers where installed correctly except the ethernet driver. windows 7 cannot find a suitable driver. I then downloaded the driver from the link provided on the hpe-590t download site, which is described as a intel gigabyte driver sp52222, however the software driver comes up with the following message your system does not meet the minimum requirement for this update (9996). Has anyone had a similar problem.
Hardware Ids are:
PCI\VEN_8086&DEV_0000&SUBSYS_00008086&REV_00
PCI\VEN_8086&DEV_0000&SUBSYS_00008086
PCI\VEN_8086&DEV_0000&CC_020000
PCI\VEN_8086&DEV_0000&CC_0200
Regards artie

I solicited the the assistance of another one of our experts who is a driver guru, you may see his reply here:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Paul-Tikkanen/m-p/4990422#M...
I tend to agree that either the NIC is bad or possiblly a factory restore would help.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

I want to reset my security question and it said check the email , but the email i didnt use for a long time so now it has been deleted so what should i do ?

i want to reset my security question and it said check the email , but the email i didnt use for a long time so now it has been deleted so what should i do ?

Hello minhluhoc,
It sounds like you are unable to reset your security questions but do not have access to your rescue email address. According to the following article you will need to contact the iTunes Store support team:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
Thank you for using Apple Support Communities.
Take care,
Sterling

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

System does not propose the delivery date based on factory calendar

Hi,
I am creating a sales order for a delivery date for this sat which is (2/22/09)
I have maintained 2 separate calendars for
1) shipping point
2) for the route
The route has a transit time of 1 day and the calendar has sat and sunday as non working.
the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
The material is available in the warehouse
Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
In the schedule line i do see the date as 2/22/09 only.
The delivery was created with the following dates
Picking = 2/17/09
Transportation Planning = 02/18/2009
Loading =02/18/2009
Planned GI= 02/18/2009
Delivery Date = 02/22/2009
How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
Can any one explain the behaviour of SAP for the delivery date logic

Dspsac,
Delivery date can be any date. For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route. You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
Calculations are explained in SAP online help
[Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
Regards,
DB49

System does not allow to enter data into cube

Hello
I use BPS NW2004s. I created a layout and execute "enter plan data". I realized that system does not allow me to enter data. Why?
Alex

I guess your cube is not transactional. Try to switch it to transactional

Why does Epson app for the iphone show a folder that has been deleted from my camera roll?

Why does the Epson app for my iphone 4 show a folder that has been deleted from my camera roll for months now?

Thanks @pdroth. I did a quick Google search of DB indexing. I'm not sure I found exactly what you were referring to but I see where you're going with it. I can understand that indexing my database of stored photos can be time consuming. It's frustrating that the space can't be recognized as being free more quickly.
I notice that some items I delete seem to free up the space much more quickly. Removing an app entirely or deleting from my Music generally shows up as available space in Usage pretty quickly.
Deleting a photo or video from the Camera Roll will take MUCH longer, so I guess that has something to do with the indexing process you are referring to.
I'd like to point out that when I run out of space on an SD card on any budget point and click digital camera that I can quickly delete a picture or two and INSTANTLY be able to take a couple of new photos in their place. I guess I just have that same expectation for the $500+ engineering marvel I have in my hand right now.
Thanks for chiming in.

Installation of OS X Mountain Lion does not move on even though it says o second remaining. It has been taking at least 4 hours. Help!!!!!

I wanted to restore my Mac before I give it out to my brother. After cleaning it, I have been trying to reinstall the OS X Mountain Lion but it does not work; it just takes forever. It is so frustrating that the installation stops when it says "about 0 seconds remaining." Help please!

Restart while holding down the Command + R keys so you can verify and if necessary, repair the startup disk.
Apple - Support - OS X Mountain Lion - Installation and Recovery

HT204053 can i sign up for icloud find my ipad after it has been taken

I have lost or my ipad2 has been taken. How do I locate it if I have my apple id and password but didnt load the app prior to it being taken.

You can go into Settings, choose General (on the left side), then choose Software Update on the right side. This should tell you which iOS (operating system) you are presently using. No doubt it will tell you there is an update.
You will need to connect your iPad to your computer and update it through iTunes to the latest iOS, which is iOS6. Once your iPad is connected via the cable to your computer, launch iTunes. The iPad will appear in the bar on the left, click on it and you will be able to see the General Information about the iPad. You will likely get a pop-up window notifying you there is a new iOS as soon as iTunes recognizes your iPad. Then iTunes will ask if you want to download and update to the new iOS. Do that. It will take probably 20-30 minutes depending on your computer and your iPad. After the update has finished, you will need to enable iCloud which will allow you to use the Find my iPad app. Please read about iCloud from the Apple Support Site BEFORE you enable it at http://www.apple.com/support/icloud/ Good luck.

I want to buy a clear iskin keyboard protector for my new MacBook pro 15" but on amazon the description does not say if it is for 13" or 15" MacBooks. Are the keyboards the same size?

Does anyone know?

Oops, sorry, got hung up in other matters. Here's a pic of the protector on the colleague's Mac. He tells me that it if hangs out too much, you can always take a scissor to it and trim to size. Personally, being a 10-finger touch typist, I find the feel of the skin totally icky and throws off my typing rythmn, but he seems to be quite happy with the thing. To each his own...

The time limits on the parental controls do not work. Apple does not seem to know how to fix this issue since the problem has been going on since at least leopard.

The time limits in the parental controls do not work. I have several mac systems and they do not work on all of them. Also, I have had this problem since at least snow leopard and it is very frustrating that Apple is unable to fix a simple issue like this. All they have to do is somehow 'hard-wire' the time limits to the system clock but they are not listening. I used the feed-back feature in their support webpage and hopefully everybody else experiencing this issue will too. Thus, if they get a thousand notes on this issue they might listen and finally fix it.

Well, the whole system with those time limits are funky. Sometime this happens, sometime that happens. When the user is on the bed time limits do not work nor do the length of time limits. It is very frustrating as one of the reasons I bought an apple in the first place was those parental controls which did not exist in Windows prior to Windows 7. I do have a Windows 7 machine now and the bed time limits work there. Maybe you have a Windows 7 machine as well and can let them use it.

Can videos be retrived after it has been deleted and factory reseted

is there such thing as retrieving videos software after you have deleted and restored your ipod back to factory settings

Maybe from the restored iPod via
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files

Desktop icons do not rearrange after one has been deleted

I don't know what I am missing but when I delete items from the desktop, I expect the other items to rearrange themselves because I have 'snap to grid' turned on. But they don't and a right click followed by 'arrange according to...' is needed. I am missing something obvious?
Thanks.

hi, has this issue been resolved? i would very much like to know as i have recently had iy happen on my macbook

When I try to send a Word Document in a email the other party opens it only for it to say that the document has been deleted because it had a virus...what do I do?

How do I clean my MacBook Pro?

Where did this Word document come from? Was it originally sent to you from another Windows user? If so, it could have been infected with something by that Windows user.
Alternately, it's remotely possible (depending on your version of Word) that you could have been infected with a Word macro "virus." This would run only within Microsoft Office and embed itself into documents you create. If you're seeing this problem with all Word documents you create, this is probably the cause. In that case, see:
http://www.macworld.com/article/1142317/kills_macro_virus.html

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

System does not reset asset retirement date for Depreciation Area specific transaction after area has been deleted

Similar Messages

Maybe you are looking for