System error 3 has occurred. The system cannot find the path specified

Enterprise Manager 12c Release 2 - 12.1.0.2.0
Agent Deployment Failed - host agent for Windows 32 bit, version 12.1.0.2
Deployment Phase Name: Secure Agent
Error: Execution of command C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent' on host myhost.mydomain.com Failed
Cause: Error Message: System error 3 has occurred. The system cannot find the path specified. Exit Code :2
Recommendation:
Fix the cause of the error and retry the operation (or) manually run the following commands on the remote host
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat secure agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat config agent addinternaltargets'
Any ideas? thanks

I installed Cygwin, and it's working fine I suppose. From my EM12c host I can connect to the Windows host via SSH:
ssh WinHost
The authenticity of host 'WinHost (XXX.XXX.XXX.XXX)' can't be established.
RSA key fingerprint is XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'WinHost' (RSA) to the list of known hosts.
oracle@WinHost's password:
Last login: Wed Sep 19 17:26:40 2012 from SomeHost
oracle@WinHost ~
$ cygrunsrv -h
Usage: cygrunsrv [OPTION]...
Main options: Exactly one is required.
-I, --install <svc_name>  Installes a new service named <svc_name>.
-R, --remove <svc_name>   Removes a service named <svc_name>.
----------------- blah blah blah ------------------------------------
Report bugs to <[email protected]>.
oracle@WinHost ~
$ date
Thu, Sep 20, 2012 10:10:01 AM
oracle@WinHost ~
$ cd /cygdrive/c/oracle/product/emagent12/ - this is the folder where I try to install the agent
oracle@WinHost /cygdrive/c/oracle/product/emagent12
$ ls -la
total 0
drwx------+ 1 oracle None 0 Sep 20 09:55 .
drwx------+ 1 WinHostAdmin None 0 Sep 19 12:31 ..
Thanks

Similar Messages

  • When I try to update I get a message that says "an error has occurred" and I cannot update like I have been doing for several years

    When I attempt to upgrade I am now getting a message that says "an error has occurred" and I cannot activate the upgrades----there are two pending

    Disable anti virus software if installed
    Make sure the firewall is turned off in System Preferences > Security & Privacy > Firewall
    Make sure Gatekeeper is enabled
    Open System Preferences > Security & Privacy then select the General tab.
    Make sure either Mac App Store or Mac App Store and identified developers is selected.
    If that area is grayed out, click the padlock icon to proceed.
    OS X: About Gatekeeper

  • The Operating System returned Error 27(The drive cannot find the sector requested.)

    On a Windows 2008 R2 server running SQL 2008 Standard on a Raid 5, when performing a backup on the databases via copy to another local drive I receive and The operating system returned error 27(The drive cannot find the sector requested.) to SQL Server during
    a write at offset 0x0000002fd204000 in the file F:\SQLDATA\Email_Images.mdf.   The server is a HP DL380p Gen8.  I've contacted HP thinking this was a Hardware issue but HP ensure me its not and to contract Microsoft support.

    Hi,
    Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Please offer us what backup method you are using, did you want to backup
    the data to the CSV, the origional error you have got.
    1. The best method would be to have separate disk drive for each cluster SQL instance and add the disk to the specific SQL group and add it to the dependency of the SQL resource.
    There would be less overhead with this process other than having to create two disks, one of each instance
    2. You could consider creating a file sharing resource on cluster and add the backup disk to this resource group and use it to back up the databases of both the instances
    to single disk. The down side of this method would be, all the databases backups will fail if the fileshare resource goes down. You cannot use GUI to take the backup, need additional setup/maintenance for the fileshare resource group
    http://support.microsoft.com/kb/224967
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • When taking a test for a job application the new tab opens up and tells me a system error has occurred

    I have to take a talent assessment test for a job application but when the tab comes up it tells me I have a system error has occurred. What does that mean?

    Hi Bob,
    I have question that I hope you can answer. I am trying to decide how to set up my wireless network with a 4th generation Airport Time Capsule (802.11n) with a 5th generation Airport Extreme (802.11n). I have read that you can extend your wireless network, but I am unsure which device I should have connected to the modem, etc., or what setup is the best way to utilize these devices. I want to setup my wireless network and get the most out of each device while making it so that internet connection is "excellent" throughout the house. In addition, I also want to be able to use Time Capsule or Airport Etreme to back up with Time Machine. Basically, I don't understand what it is that I have and how to use it in the best way.
    Any help with this matter would be greatly appreciated.
    Thank you,
    Michael

  • Encountered : A system error has occurred while locking, pls help

    Dear All..
    pls help..
    while executing some of our remote function module we encountered some locking error.. the message returned by SAP is :
    A system error has occurred while locking
    from message class : M3 #021
    the remote function module is running bapi_goodsmvt_create in background..
    the question is.. why this error occured and how to solve it ? and what is the root cause.. ?
    because the error is only happened once (until now) we cannot simulate to get the error again.. so it is hard to find out the root cause..
    thanks for the help..
    sasmente

    Hi,
    I am also having the same problem. I am running the BAPI_MATPHYSINV_CHANGECOUNT' to count the Articles.
    When I print the error on screen, some the data shown as counted. Some are not changed and some with the following error.
    System error while locking the data
    Furthermore I went to the BASIS and saw that when we run this particular program its showing the locks on MARC and several tables with the same System ID from which we run the program
    Can anyone come up ? Its getting too hard to resolve.

  • ERROR - A system error has occured in lock management

    Dear All ,
    I have a major issue in my workflow in production client  .  In SWEL  there are some workflows which
    got started & then  error occured as per the message " A system error has occured in lock management " and no workitem gets created .
    This issue happened just 1 day back and still continues somtimes .
    If any one have any idea on the issue , what is the root cause of the issue , please suggest how to solve the same .
    Regards
    Prabhu

    No WF-BATCH is not locked . This issue does not happen every time , it happens some times .other wise workflow runs fine .
    I will tell you when i checked abot the error message by clicking F1 help i got the below message details-
    An error occurred in lock management when attempting to set a lock on table SWWWIHEAD.
    The data cannot be processed at the moment. The data is displayed.
    So i think there is some issue happens in updating the entry in the table which happens some times , and gets rectified automatically . But the workflow which gets affected by this error does not start .
    so any idea on the same .
    Regards
    Prabhu

  • BAPI_GOODSMVT_CREATE ERROR: A System Error Has Occurred While Locking

    Hi All,
    I am having a problem with a Z program that I am writing.
    Basically, it uses the BAPI mentioned in the title. The program will read excel file that is being uploaded, and then will segregate the line items by 200 lines.
    That means, if I were to upload 1000 line items, the BAPI will be called and executed 5 times (1000/200 = 5).
    However, when trying to upload 10000 line items, I received this error after around 3000 line items.
    "A system error has occurred while locking".
    This happens when IMPORT parameter TEST_RUN is set to 'X'.
    I found this after some googling: http://sap.ittoolbox.com/groups/technical-functional/sap-basis/lock-entry-system-error-1674434
    I am hoping for your expert thoughts on this.
    Thank you.

    BAPI TO Upload Inventory Data
    * GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
    *                      02 - MB31 - Goods Receipts for Prod Order
    *                      03 - MB1A - Goods Issue
    *                      04 - MB1B - Transfer Posting
    *                      05 - MB1C - Enter Other Goods Receipt
    *                      06 - MB11
    * Domain: KZBEW - Movement Indicator
    *      Goods movement w/o reference
    *  B - Goods movement for purchase order
    *  F - Goods movement for production order
    *  L - Goods movement for delivery note
    *  K - Goods movement for kanban requirement (WM - internal only)
    *  O - Subsequent adjustment of "material-provided" consumption
    *  W - Subsequent adjustment of proportion/product unit material
    report zbapi_goodsmovement.
    parameters: p-file like rlgrap-filename default
                                     'c:\sapdata\TEST.txt'.
    parameters: e-file like rlgrap-filename default
                                     'c:\sapdata\gdsmvterror.txt'.
    parameters: xpost like sy-datum default sy-datum.
    data: begin of gmhead.
            include structure bapi2017_gm_head_01.
    data: end of gmhead.
    data: begin of gmcode.
            include structure bapi2017_gm_code.
    data: end of gmcode.
    data: begin of mthead.
            include structure bapi2017_gm_head_ret.
    data: end of mthead.
    data: begin of itab occurs 100.
            include structure bapi2017_gm_item_create.
    data: end of itab.
    data: begin of errmsg occurs 10.
            include structure bapiret2.
    data: end of errmsg.
    data: wmenge like iseg-menge,
          errflag.
    data: begin of pcitab occurs 100,
            ext_doc(10),           "External Document Number
            mvt_type(3),           "Movement Type
            doc_date(8),           "Document Date
            post_date(8),          "Posting Date
            plant(4),              "Plant
            material(18),          "Material Number
            qty(13),               "Quantity
            recv_loc(4),           "Receiving Location
            issue_loc(4),          "Issuing Location
            pur_doc(10),           "Purchase Document No
            po_item(3),            "Purchase Document Item No
            del_no(10),            "Delivery Purchase Order Number
            del_item(3),           "Delivery Item
            prod_doc(10),          "Production Document No
            scrap_reason(10),      "Scrap Reason
            upd_sta(1),            "Update Status
          end of pcitab.
    call function 'WS_UPLOAD'
      exporting
        filename                      = p-file
        filetype                      = 'DAT'
    * IMPORTING
    *   FILELENGTH                    =
      tables
        data_tab                      = pcitab
    * EXCEPTIONS
    *   FILE_OPEN_ERROR               = 1
    *   FILE_READ_ERROR               = 2
    *   NO_BATCH                      = 3
    *   GUI_REFUSE_FILETRANSFER       = 4
    *   INVALID_TYPE                  = 5
    *   OTHERS                        = 6
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      exit.
    endif.
    gmhead-pstng_date = sy-datum.
    gmhead-doc_date = sy-datum.
    gmhead-pr_uname = sy-uname.
    gmcode-gm_code = '01'.   "01 - MB01 - Goods Receipts for Purchase Order
    loop at pcitab.
      itab-move_type  = pcitab-mvt_type.
      itab-mvt_ind    = 'B'.
      itab-plant      = pcitab-plant.
      itab-material   = pcitab-material.
      itab-entry_qnt  = pcitab-qty.
      itab-move_stloc = pcitab-recv_loc.
      itab-stge_loc   = pcitab-issue_loc.
      itab-po_number  = pcitab-pur_doc.
      itab-po_item    = pcitab-po_item.
      concatenate pcitab-del_no pcitab-del_item into itab-item_text.
      itab-move_reas  = pcitab-scrap_reason.
      append itab.
    endloop.
    loop at itab.
      write:/ itab-material, itab-plant, itab-stge_loc,
              itab-move_type, itab-entry_qnt, itab-entry_uom,
              itab-entry_uom_iso, itab-po_number, itab-po_item,
                                                  pcitab-ext_doc.
    endloop.
    call function 'BAPI_GOODSMVT_CREATE'
      exporting
        goodsmvt_header             = gmhead
        goodsmvt_code               = gmcode
    *   TESTRUN                     = ' '
    * IMPORTING
        goodsmvt_headret            = mthead
    *   MATERIALDOCUMENT            =
    *   MATDOCUMENTYEAR             =
      tables
        goodsmvt_item               = itab
    *   GOODSMVT_SERIALNUMBER       =
        return                      = errmsg
    clear errflag.
    loop at errmsg.
      if errmsg-type eq 'E'.
        write:/'Error in function', errmsg-message.
        errflag = 'X'.
      else.
        write:/ errmsg-message.
      endif.
    endloop.
    if errflag is initial.
      commit work and wait.
      if sy-subrc ne 0.
        write:/ 'Error in updating'.
        exit.
      else.
        write:/ mthead-mat_doc, mthead-doc_year.
        perform upd_sta.
      endif.
    endif.
    *       FORM UPD_STA                                                  *
    form upd_sta.
      loop at pcitab.
        pcitab-upd_sta = 'X'.
        modify pcitab.
      endloop.
      call function 'WS_DOWNLOAD'
        exporting
          filename                      = p-file
          filetype                      = 'DAT'
    * IMPORTING
    *   FILELENGTH                    =
        tables
          data_tab                      = pcitab
    * EXCEPTIONS
    *   FILE_OPEN_ERROR               = 1
    *   FILE_READ_ERROR               = 2
    *   NO_BATCH                      = 3
    *   GUI_REFUSE_FILETRANSFER       = 4
    *   INVALID_TYPE                  = 5
    *   OTHERS                        = 6
    endform.
    Code Formatted by: Alvaro Tejada Galindo on Dec 26, 2008 10:20 AM

  • A system error has occurred while locking

    Hi, we encountered the error "A system error has occurred while locking"  when executed transaction mm01.  They said it's because the same material was launched in VL02n (outbound delivery) How can I check if it was really because of VL02n?  they said that the lock was already deleted by Basis.  Is there any tcode I can check where it really came from? thanks so much!

    Hi,
    If you are authorised for TCode - SE37 then execute the Function Module "TRANSACTION_CALL_VIA_RFC" and then enter TCode SM12 and execute. And then follow the option as suggested in earlier post.

  • A system error has occured while locking

    Message no. M3021 : A system error has occured while locking
    I get this message in TCODE MM42 (IS RETAIL) after mass updating articles using TCODE MM46.
    The lock table size was increased from 4 MB to 10 MB and still the issue occurs. It looks the lock table can store only 3600 entries, is there a way to increase number of entries.
    Thanks
    Jagadhish Natarajan

    First, is this mass update going to happen on reguarly?
    If no - you may want to further increase enque/table_size until it can finish this one-time run of the mass update.
    If yes - you may want to work with your SAP basis guy and read note 13907.  From your side, you may need to reduce the volume of this mass update.  From the basis side, they need to determine a proper size for the enqueue table size.

  • I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4).  When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils".  Anyone know wha

    I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4).  When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils".  Anyone know what the problem is and how to fix? Thanks.

    https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

  • Office Home and Student 2010 has stopped working Unspecified Error has occurred. Request cannot be processed at this time. Please try again later ( 0x8007000D )

    My office is saying its an unlicensed product and it prompts me to re install.  It come up with Microsoft Activation Wizard then when I select to activate software via the internet an error comes up saying:
    Unspecified Error has occurred.  Request cannot be processed at this time. Please try again later ( 0x8007000D )
    Please can you help me? I have tried pressing shift and right click an using system administrator but still not working.  I've called the UK helpline and have been cut off twice after repeating myself to the person on the other end.  May be easier
    to try and get some assistance on here? 

    Hi,
    This error can indicate a permissions issue in the registry and/or other operating system issues.
    Here is a
    blog post which descripts some fixes to this specific error:
    Check the Device Manager first to determine whether the issue was caused by an underlying operating system issue.
    If it's not an issue with the operating system, try the rest steps descripted in the blog to troubleshoot the issue.
    Please have a try and feel free to post back with any findings.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)

    Hi guys
    i have problem when i run my windows application exe in windows server 2003
    it give me this exception error :
    I using sql server 2005
    visual studio 2008
    See the end of this message for details on invoking 
    just-in-time (JIT) debugging instead of this dialog box.
    ************** Exception Text **************
    System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
       at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
       at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
       at System.Data.SqlClient.TdsParserStateObject.ReadByte()
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
       at System.Data.SqlClient.SqlDataReader.get_MetaData()
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
       at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
       at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
       at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
       at Sales.SalesClass.ShowSalesData(String ConnectionString)
       at Sales.Form1.timer1_Tick(Object sender, EventArgs e)
       at System.Windows.Forms.Timer.OnTick(EventArgs e)
       at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    ************** Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    Sales
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///C:/Documents%20and%20Settings/administrator.ALTAWIREADYMIX.000/Desktop/Sales.exe
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    System.Data
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    System.Transactions
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
    System.EnterpriseServices
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    Why this error show and how to solve it
    if possible help me
    Why this exception show and how to solve it.
    Notes this exception not close my application and not affect in result show but i don't know why it show

    The problem can be caused by certain issues of long-running queries, which are reported improperly. Try increasing the timeout:
    http://support.microsoft.com/en-us/kb/555938

  • Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
    Regards,
    Nathaniel
    [removed by moderator]

  • An error has occurred while attempting to load the Crystal Reports runtime in deployed applications

    My reports use to work but now i'm getting the following error on all reports in all the applications on my server
    An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required.  Please go to http://www.businessobjects.com/support for more information.

    Hi Willingtolearnja,
    This forum is for TFS, I'd like to know whether you use TFS and your question is related to TFS. It would be better to let us know more details about your scenario if it's related to TFS. If not, you might need to open a new thread in the proper tech forum
    that your project related for a better response.
    However, from the error message, you might use the wrong configuration for x86/x64 mode. Please change the configuartion and try again. Check the links below for more information:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/82e23647-7116-424b-b437-df0cb2be083d/an-error-has-occurred-while-attempting-to-load-the-crystal-reports-runtime?forum=vscrystalreports
    http://stackoverflow.com/questions/19286630/an-error-has-occured-while-attempting-to-load-the-crystal-reports-runtime
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • An error has occurred while attempting to load the CR in hosting

    I deployed my asp.net with crystal report in hosting server...
    They have installed Crystal Report Basic Runtime for Visual Studio 2008.(10.5.3700.0) on windows server 2008 OS X64..
    I developed my asp.net application with visual studio 2008 in xp machione x86 now on deploying this im getting the following error on hosting server, in my local server it works fine..
    The error:-
    An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required.  Please go to http://www.businessobjects.com/support for more information.
    They have installed 10.5.3700.0 runtime on server still why this error...?

    You probably installed the 32 bit runtime (x86) but are running the application in 64 bit mode.  I think you are using a web app, so you need to do one of two things, install the x64 version of the runtime or switch the application pool for your website to run in 32 bit mode.

  • An error has occured while trying to save the application. Please try again.

    Hi,
    When i try to add application on my primary CRS node i am getting below error
    An error has occured while trying to save the application. Please try again.
    This also happens if i edited another existing scripts
    CCX version is 8.0
    thanks

    How about if you try to add it on the HA server?
    Which server is master at this time?
    Chris

Maybe you are looking for