System Error - 6110 Navigator

I can not sync my phone with PC Suite.
I know that the phone is connecting, because I can see my messages in the PC suite window.
Clicking on the Sync logo in PC Suite I get the following message "Please check your Synchronisation settings and ensure your phone is in the Idle state, then restart the Synchronisation." and the message "System Error" on the handset.
When I try to run NSU, it hangs that the first "starting application" window, and then error message "Sorry, Nokia Software Updater service in unavailable, please try again later".
I have uninstalled and Reinstalled PC Suite (v7.1.26.1) and NSU (v1.6.13 en) on my notebook.
I have reset my handset to the factory default settings.
I can not reinstall PC Suite Support as it is greyed out in PC Suite.
Any advice or solution?
Solved!
Go to Solution.

Well, NSU failure usually has nothing to do with the phone, but rather with the Internet connection. Try disabling your firewall or antivirus software, or connecting through another network (at work or at a place where wi-fi is available). It also may be a problem with Nokia's servers - a week ago I couldn't launch my NSU either, with the same error message, even though it was working fine the day before. After a day or two of trying, it started working by itself.
v05.15 | 30-Apr-2009 | RM-328 | © Nokia 6220c-1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I hate kudobeggars!

Similar Messages

"System Error" when accessing Clock - 6110 Navigat...

Hi all,
Did a software upgrade last week using the Nokia update software.
Said it all worked fine, but now, when I try and access the Clock to change alarms, etc. I get a message saying "System Error"
I've reset to factory defaults and done another update but no joy.
HELP!!
DaveA

This probably means that corrupt data concerning the clock or alarm was backed up and restored.
Do the backup with PC Suite, reformat the phone again, and restore only the data that you know you need (example, contacts, messages etc.), don't leave all boxes ticked on the restore.
You need a fairly recent version of PC Suite to do the partial backup/restore, the latest is at www.nokia.com/pcsuite.

Nokia 6110 Navigator 5.11 Buglist

Nokia, after a year of no support for the Nokia 6110 Navigator despite many bugs, please readd firmware-update-support in Nokia software updater, and fix those bugs remaining in the firmware 5.11 installed by most Nokia service centers since July 2008:
1- when alarm is set to workdays "monday-to-friday" (or whatever 5 day-period) the date on the phone doesn't change on saturday night. On sundays it still shows saturday although the time is correct, and the alarm doesn't work till the date is reset and then everything goes normal till the next sunday when the problem happens again.
2- No matter if you use the original Nokia Sound recorder or third party software, all the recordings have a loud crack sound in the beginning.
3-Volume +/- does not function while playing games.
4- Dual line 32kb sim cards fail to switch to the second line and resets the phone when switched to the second line.
5-Line 1 ringtone and Line 2 ringtone options in profiles disappear for no reason although using a dual line.
6-Deleted numbers in Logs->Recent Calls-> missed/received/dialled logs still remain in the log list view which shows coloured arrows.
7-Even if the sent message history is turned off, the numbers which were sent messages are still shown in the log list shown with arrows.
8- Numbers dialed/received calls list occasionally clears if phone turned off
9- If the phone gets connected to computer over usb cable, and used once on pc suite mode and then once in the data transfer mode, then the vibration is disabled until you reboot the phone. (Settings suggest the vibration is on, but in fact it is simply turned off)
10- On the internet bookmarks view, (accessed through the web icon) if a bookmark is deleted or moved to a different folder they are still shown in the root until the application is closed and re-opened. And if tried to open them by mistake the phone responds "it doesn' exist".
11- If you conect the phone to Nokia software updater by usb cable in pc sync mode, then connect it by data-transfer-mode, all your own created folders including moved icons will be lost and reset to default.
12-It's not possible to use voice dial with voice synthesis turned on.
13- No flash lite 3.0 support
14- If a memo is set or synchronised from outlook the memo still shows on the screen even if the date has been passed.
15- If we try to change the date of a past memo by changing both the start and end date to a future date the phone gives an odd error message that says: "Alarm time already passed" What alarm time? There's no alarm option or alarm time field in memos.
16- The phone occasionally shuts down completely (turns itself off) without any warning for some users.
17- Nokia CK 7W bluetooth carkit and other carkits from other companies (for example Funkwerk-Dabendorf Audio2000 with Bluetooth Adapter version 2) have an echo problem where the remote person hears its own voice and a terrible echo. This seems to be due to the fact, that inbuild microphone on the phone is not turned of completely.
18- While entering a new phone number after typing the number a phone type is selected such as telephone, mobile, work mobile etc.If selected the wrong type there is no way to change tis type unless the number is deleted and re-entered which is a hassle.
19- If there are more than one mobile numbers assigned for a contact as "mobile" type (like mentioned above) set default option does not work.
20- The bluetooth A2DP quality has gone worse. It is skip-happy, and degrading of audio quality is very obvious.
21- If any mp3s have embedded images in the id3 tag, which are not quite square (e.g. 194pxls by 197pxls in one of my files), the music will play, but the phone will almost totally lock up if you try to use another application, and the album art won't show at all.
22- Notes in the organiser on the phone cannot be synchronised with the PC via Nokia PC Suite(Outlook 2003).
23- Music Player on the phone finds "zero" audio files when connected to Nokia Suite via USB.
24- If a call is made while connected to a bluetooth carkit (CK 7W in my case) the latest number dialed won't appear in the logs.
25- When navigating in the standard "Nokia Navigator" Route66 application, if the display mode with all info at the bottom (the only mode that display ETA) is set the phone normally remembers this mode between sessions. When signal is lost (typically after a tunnel), the display mode is reset back to default. Please add the newest Route66 updates! As easy as that! Route66 already released 3 new official updates during this time.
26- If an internet connection is established via the browser and closed, the internet connection stays on constantly until the battery is very hot and voltage is drained only if the e-mail update (push e-mail) is set to "ON".
27-The streaming mode is problematic. An H.264 video encoded in 320x240 resolution could be watched full screen in the streaming mode in the previous firmware however the phone will freeze within 1 or 2 seconds after switching from the standard window size to full screen size after 4.22 if watched during streaming.
28- Real Player(Or music player) doesn't update the playlist unless the phone is not restarted.
29- For some of the users some videos start with the first frame and then shows a black screen for a while and then the video plays normally. (DivX Avi files?)
30- System startup dramatically slows up if using a HCSD memory card.
31- Sound cracks occur in high bit rate mp3's if using an HCSD memory card.
32- The flash provides such an artificial colour tone to the picture which makes the picture looks almost blue or green in all cases.
33- If a user decides to use an alternative navigation software he/she should be able to remap the dedicated navigator button to the executeable of the 3rd party software.
34- Sometimes Nokia Navigator-Program is unable to get a satfix, even if satellite-signal is good enough (3 satellites and more above 70% signal-strength). You have to restat the program to get a satfix. Also new Nokia Navigator/Route66-mobile8-version would fix this problem.
35- When you receive via bluetooth a file with an "unknown extension", there is no way to open the message that contains the attached file and, therefore, there is no way to save the file itself.
There are certainly more bugs, those ones are the ones found by a few customers, the most obvious ones, that keep us nagging since a year now. It seems, you are not testing your phones, as bug #1 (alarm-clock) for example is obvious and was not fixed since the release of the phone.

And I'd like to add these remaining ones from our other threads..
36- When listening to music on the handset and a call comes through, the sound switches to Mono after you hang up and the music resumes playing. And the only way to restore stereo sound is to restart the phone.
37-6110 keeps showing alot of devices in the "send to" bluetooth menu that was paired with and deleted long ago.
38-Joystick press can be used for accepting commands at all areas except for messaging. When message is ready to be sent you cannot click joystick and send message. You need to select options and send and then choose select from the menu.

PC Suite - System Error

I can not sync my phone with PC Suite.
I know that the phone is connecting, because I can see my messages in the PC suite window.
Clicking on the Sync logo in PC Suite I get the following message "Please check your Synchronisation settings and ensure your phone is in the Idle state, then restart the Synchronisation." and the message "System Error" on the handset.
II have uninstalled PC Suite and NSU, and used the nokia cleaner...and Reinstalled PC Suite (v7.1.26.1) and NSU (v1.6.13 en) on my notebook.
The handset is a 6110 Navigator (24.01) V06.01 RM-122. I have reset my handset to the factory default settings.
I am using XP SP2, USB or Bluetooth, same problem.
I can not reinstall PC Suite Support as it is greyed out in PC Suite.
When I try to run NSU, it hangs that the first "starting application" window, and then error message "Sorry, Nokia Software Updater service in unavailable, please try again later".
I have kept on digging to try and sort this myself...
If I set PC Sync to sync everything but callendar/tasks, it works fine. Even with callendar set for 1 Day past and 1 Day future it still fails.
Some posts talk about bad characters in your outlook calendar, but I can not delete my entire calendar as the whole reason I need this is my calendar at work.
Another post talks about your PC Sync profile in the phone, but mine seems OK. Not sure what it should be, but it seems normal.
I still have no idea why NSU fails.
Any advice or solution?
Message Edited by daewoo01 on 05-Jun-2009 07:10 AM

Continue to try and solve this problem...
When I try to open the calendar on the phone, it just flashes and doesn't do anything.... so the problem is obviously with the phone...
Nokia Care just suggested I reset to default settings, which I did, no improvement...
any ideas?

Variable system Error

Hi BW Friends.
I have defined a variable as optional with process type User Entey /Default. I assigned this to Characteristics OpCo. When I run the uery I have got a mesaage as system Error. When Pressed Ok, it is working. The details of system error as below.
Could you some one help me please.
Diagnosis
The Can be changed in query navigation property has been set for variable Z_CP_028, characteristic OpCo. However, the variable is used in the query in such a way, that the system is unable to apply this change-option.
This can, for example, occur under the following conditions:
Characteristic OpCo is filtered by additional restrictions (the restrictions must be joined using an OR-connection)
A second characteristic, which is restricted by a variable, is compounded to charcteristic OpCo.
Variable Z_CP_028 is a hierarchy node variable, but the hierarchy has not been determined uniquely.
A variable can be changed during query navigation only if it is used exclusively in a drilldown-characteristic, and there are no further restrictions to the characteristic other than this variable. There must be no additional characteristics with variables compounded to the characteristic you are working with. For variables for hierarchy nodes, the hierarchy must be determined uniquely and agree with the set display hierarchy.
Also, if the characteristic value is moved, for example (Z_CP_028 - 1), the variable is no longer able to be changed when navigating queries.
System response
The entry Z_CP_028 Can be changed during query navigation is not applied.
Procedure
Check the query definition.
Procedure for System Administration

Hi Sudhakar,
For the variable that you have created, uncheck the Can Be Changed with Query Navigation option. Save the query and try to execute it once more.
Hope this helps...

Can't set ringtone on 6110 Navigator

I have a problem with my new (1 month old) 6110 Navigator. If I go to the Profiles customization and click on "Ringing tone" or "Video call tone", etc., it shows an "Opening" dialog with a progress bar... and stays there indefinitely.
I can't do anything at this point except to use the end call key to quit the application or menu key to switch tasks.
This actually also happens if I try to use the Gallery for pictures.
I can set a voice call ring tone via the music player's menu option, but this does not let me set my message tone or browse pictures.
The Music Library in the music player seems to work, but only includes mp3s and m4as.
Occasionally when I try to do this (more often recently), it also displays a box during the "Opening" dialog: Application closed: MGX DB work thread0 USER 11
then: Application closed: ContentListingFrame workServer MGXDatabase 3
A google of these errors pulls up a single chinese website.
My phone is fairly stock, only installed a handful of things like the Nokia Sports Tracker, some games and other java apps.
The phone is actually a Taiwanese model (includes traditional chinese input/display) - firmware is updated to 3.58, though I think the problem existed before I updated but am not sure.
Has anyone seen anything like this on an S60v3 phone?

I did some more experimenting and it looks like my card had some corrupt filesystem entries. I was still using the 512M card that came with the phone. After doing a disk check on windows and repairing some problems on it, it was working better, but still sometimes had problems. I ended up just formatting the card and reinstalling the stuff I had. This solved the problem completely, though I lost the data files for a dictionary program that came preinstalled (Chinese-English) and it doesn't seem to be on the installation disc.
Message Edited by arima on 28-Feb-2008 10:29 AM

Configuration framework system error - the configurable won't be loaded

Hi, I have followed the tutorial on how to url=https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/Implementing%20Resource%20List%20Filters%20for%20Flexible%20UI%20Navigation/index.htm]Implement a Resource List Filters for Flexible UI Navigation[/url]
When uploading my par file into the portal, I get following error in the defaulttrace file, although the filter works :
[synchronizer_(config://install/cm/services/resourcelistfilter)_(source:config://import/install/data/cm/services/resourcelistfilter)] cannot load [(configurable: SimpleTbpResourceListFilter:ResourceListFilter)] : ConfigException: Configuration framework system error: "id consistency error on [SimpleTbpResourceListFilter != SimpleTBPResourceListFilter] : the configurable won't be loaded ! please, check file name..."
Seems like it's related to the configuration of the .co.xml file. Like in the tutorial I have created this file in location src.config - install - date - cm - services - resourcelistfilter (this folder had to be created manually, not generated by the RF wizard).
_simple_tbp_resource_list_filter.co.xml
<?xml version="1.0" encoding="UTF-8" ?>

<Configurable configclass="ResourceListFilter">
<property name="classname" value="z.imec.flexsort.filter.SimpleTBPResourceListFilter"/>
<property name="description" value="A sample implementation of a resource list filter. Filters out documents with TBP Valid From and Valid To properties."/>
<property name="alias" value="SimpleTBPResourceListFilter"/>
</Configurable>
configArchive.properties
# com.sap.portal.pdk.srv.config
ca.name=SimpleTBPResourceListFilter.prjconfig
ca.version=6.0.1.1
ca.creation.time=1708
ca.creation.date=20070425
ca.creation.user=Kevin Laevers
ca.creation.machine=unknown
ca.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
cma.name=SimpleTBPResourceListFilter.prjconfig
cma.version=6.0.1.1
cma.storage=sfs
cma.creation.time=1708
cma.creation.date=20070425
cma.creation.user=Kevin Laevers
cma.creation.machine=unknown
cma.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
Any idea on the message in the defaulttrace file?
Thanks :o)
Kevin

Hello,
Can you please explain what exactly the issue? I'd like to know any issues you are having with the video workflow.
Thanks,
Vish

System Error in KM Content - Documents

Hi
I am getting the following error when navigating from Content Administration > KM Content > Documents
System Error
An exception occured during the program execution
On checking the NWA:
java.lang.NullPointerException
at com.sapportals.wcm.util.acl.jdbc.JDBCAcl.containsPrincipal(JDBCAcl.java:437)
at com.sapportals.wcm.util.acl.jdbc.JDBCAcl.isAuthorized(JDBCAcl.java:410)
at com.sapportals.wcm.util.acl.jdbc.JDBCAcl.checkPermission(JDBCAcl.java:615)
at com.sapportals.wcm.repository.security.ResourceAcl.checkPermission(ResourceAcl.java:29
I searched for this in forum and came across the SAP Note: 1450398 via the [link|http://forums.sdn.sap.com/thread.jspa?threadID=1722232&messageID=9254778#9254778]
*Error doesn't appear when logging with the J2EE admin rights As per the note, I did check the System Principals and they are correct..
Any thoughts?
Appreciate you input.
Regards,
Dharmi
Edited by: Dharmi Tanna on Jan 10, 2011 2:47 PM

Hi Aliaksandr,
Thank you for the reply. The note says:
B.) Possible workaround before the release of mentioned deliveries: Logon to the portal with a system-principal user. Make sure that the
respective system principal user is authorized to change resourcepermissions,i.e. "Change Resource Permissions" checkbox is being activated.
After that try to modify the ACL of a KM plain resource (or folder location) for which the issue persists. "
The "Change Resource Permissions" is already acitvated as per the example here under:
Example
Permissions for an Administrator Role
Authorized to Change Resource Permissions = activated
Unlock Permission                         = activated
Resource Permissions                      = write, read, delete
Permissions for index_service User
Authorized to Change Resource Permissions = deactivated
Unlock Permission                         = deactivated
Resource Permissions                      = read
It does not say to change permissions of the "Documents " folder self!. I checked the permissions on the "Documents" folder and it is by Default to "Everyone - full control".
Regards,
Dharmi

System error in program SAPLRSOA

Hello All,
I tried to execute a query and it resulted in the following error:
System error in program SAPLRSOA and form FUNC RSOA_VCUBE_READ_REMOTE_DATA[6] (see long text).
In BI, the data is readfrom the remote cubes. And there seems to be error in the function used to read the data from these remote cubes.
Further on seeing the long text, I got the follwing message:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299
Can someone pls help me on this soon?

Hi,
Pls chk this note;
Note 983605 - Query on RemoteProvider: No data or termination
Symptom
A query on a VirtualProvider (SAP RemoteCube) or on a MultiProvider that contains a Virtual Provider terminates with an error message from the source system. Possible errors are:
Unexpected error: reduce_field_list
Or: The query does not return any data.
Or: If you carry out the query on a MutiProvider with virtual PartProvider, it may return incorrect data, because the part from the RemoteCube is missing.
Other terms
RSOA_VCUBE_READ_REMOTE_DATA, PERFORM transform_to_ts, Remote InfoCube, InfoProvider, Cube, data target, destination
Reason and Prerequisites
This problem is caused by a program error.
The VirtualProvider (SAP RemoteCube) is connected with a DataSource via a (3.X) InfoSource.
The navigation step of the query leads to a limitation (selection) on a characteristic that is filled with a constant in the transfer rule (between 3.X InfoSource and DataSource).
Technical: Initial entry in field list.
Solution
BW 3.0B
           Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available once Note 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
           Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available once Note 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
BW 3.50
           Import Support Package 19 for 3.5 (BW 3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package 19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
BW 7.0
           Import Support Package 10 for 7.0 (BW 7.0 Patch 10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version"
Hope this helps
Regards
CSM Reddy

Share online 3.0 for Nokia 6110 Navigator

Is there a possibility to get Share online 3.0 (or older verisons for nokia 6110 Navigator)
Thanks in advance,
Mokic

Try to download a version for another model with a similar operating system (like the N95) and see if it installs.
Get it here: http://europe.nokia.com/A4388352
If it doesn't install then it is not compatible with your model. This is because it's a feature designed for N series phones.

Nokia 6110 Navigator - software update to be suppo...

Hello.
I have a Nokia 6110 Navigator.
Is the operating system to be supported by the software update system at any time soon?
Do any people knows when this phone will be commercially available?
Thanks!

02-Jul-200707:30 AM
awesome wrote:
Just one question for you guys, why do you prefer 6110 over N95?
N95 has a better camera, and it has WiFi as well. All at a considerably higher price (+ $300).
Apart from that, 6110 offers mostly the same features. The battery lasts longer, and the use of GPS is much faster. No extra costs for downloading of maps or subscription for the use of GPS.
Try to check out the difference between 6110 which uses Route 66 maps, and N95 which uses Nokia Maps.
I also highly recommend you to read phone reviews on the internet, e.g. by entering "Nokia N95"+review (or test) in a search engine.

Update firmwire of Nokia 6110 navigator

Hi!
I've trouble updating my firmwire to at least version 4.21 on my Nokia 6110 navigator. I have product code 0550917 and the latest possible firmwire seems to be 3.58 but I need at least 4.21 to install some software programs I need in my phone.
Can anyone help me fix this problem? I'm using swedish in my phone as primary language. From what I think I have found out there exist a firmwire version of 4.2x including the nordic.
And by the way I have no idea about how to trick the nokia phone software updater to ignore that the latest firmwire version is 3.58.
Help me, please!! =)

first of all, there was newer a public firmware version 4.21, the one and only new firmware is 4.22 (from 3.58 to 4.22).
that new firmware works with the map Western Europe with Nordics, but it does NOT include it! you still have to buy it for nearly 100 euro. however without firmware 4.22, that map will always give you an error when you try to navigate.
you just have to wait for the firmware for your product code, i dont know how long it will take.
Message Edited by laxlex on 25-Feb-2008 08:47 AM

System error in program CL_RSDM_READ_MASTER_DATA and form

Hi Xpertz
I had a workbook created on a multiprovider. There was a navigation attribute removed from a infoobject for(which was not mapped in my multiprovider)
I am getting this error when i try to run the workbook.
"System error in program CL_RSDM_READ_MASTER_DATA and form
sidvaldirect_read2"
I tried running rsrv and found that there was a hierarchy field which is giving error.
It stated that no leaf properly maintained.
I tried correcting it but it didnt work.
But I went to my query and removed a field(not hierarchy but another characterstic in the query) and it works fine.
I am not restricitng anything key figure with this characterstics..
So how to go about this...........
Thanks in advance
Regards
R M K

Hi Ravi
I checked that the hierarchy and the characterstics both are different and heirarchy is not using the characterstic. Could you tell me what causes this error? If it is because of SID's then how to handle that. Awaiting your reply.

System error in program CL_RSR_WWW_RENDERER and form GET_NORM

when i exicute the query, after exicution if i right click on the character >go to the properties
iam getting the fallowing error-*System error in program CL_RSR_WWW_RENDERER and form GET_NORM (see long text)*

Hi Gandapudi,
The "Only values from Navigation" refers to get data with the posted values only.
You can specify how filter values are to be selected for query execution:
●      Only Posted Values for Navigation
The system displays posted values only.
●      Only Values in InfoProvider
The system displays only those values that are in the InfoProvider.
●      Values in Master Data Table
The system displays all characteristic values from the master data, independently of transaction data.
●      Characteristic Relationships
The system uses the current restrictions from the filter of the query and only displays the characteristic values that are valid according to the characteristic relationships.
Refer the link for more information
http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a5673e09411d2acb90000e829fbfe/frameset.htm
Regards,
Ravi Kanth

System Error on SIM Change

hi
I have Nokia N73 Music Edition. When i changed my SIM Card am getting "System Error". When using the SIM which i used previously there is no problem. Please give my a solution
Regards
P.Bharathiraja

Oh yes, Navigator is correct. I had forgot the voltage thing. Ask your operator to give you a new SIM with the same number, but I don't think this would be an easy task. I think you are from India, here in Sri Lanka, such SIM changes take both time and money and will cost you a few trips to the network's head office probably too.
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

System Error - 6110 Navigator

Similar Messages

Maybe you are looking for