SYSTEM ERROR: An accept of a new connection has failed: OS Error 4:

hi,
Iam using forte.Iam getting this error Can anyone help me out from this error..!!
SYSTEM ERROR: An accept of a new connection has failed: OS Error 4:
Interrupted system call
Class: qqsp_RemoteAccessException
Error #: [501, 236]
Detected at: qqcm_ExternalConnection::AcceptConnections at 1
Last TOOL statement: method EXEProtocolManager.Listen
waiting for your valuable reply

Hi Suresh
Give more details abot your OS. Can you share the source in EXEProtocolManager.Listen method?
GS
Iam using forte.Iam getting this error Can anyone
help me out from this error..!!
SYSTEM ERROR: An accept of a new connection has
failed: OS Error 4:
Interrupted system call
Class: qqsp_RemoteAccessException
Error #: [501, 236]
Detected at:
qqcm_ExternalConnection::AcceptConnections at 1
Last TOOL statement: method
EXEProtocolManager.Listen
waiting for your valuable reply

Similar Messages

OBIEE The connection has failed Essbase Error 226246926

I recently installed BI Administration Tool 11.1.1.7 64bit on my Windows 7 machine and was trying to establish a connection to Essbase. After setting the properties for Database and Connection Pool in the Physical Layer, when I click on "Import Metadata" I am getting an error "The connection has failed Essbase Error 226246926". I choose Essbase 9 on the Database type The connection pool properties for the rest of it is all default, I even tried using Essbase 11 but still getting the same error.
Earlier, when I had BI Admin Tool 11.1.1.6, I was able to successfully establish the connection using database type as Essbase 9 but after the the upgrade I was not able to establish the connection.
I would appreciated any suggestions/inputs to fix the issue

Hi,
his issue is fixed. tnsnames.ora file need to exist in the both OBIEE Oracle homes ( C:\Middleware\Oracle_BI1 and C:\Middleware\oracle_common )
After the 11.1.1.5 installation on my Windows Machine, C:\Middleware\Oracle_BI1\network\admin directory structure was created.
However for the 2nd Oracle Home (C:\Middleware\oracle_common), the directory structure existed only till C:\Middleware\oracle_common\network. I copied the TNS file to C:\Middleware\oracle_common\network.
pls mark correct,if ansrwd
thanks

The connection has failed while creating a New Repository using Oracle BI 11g Administration Tool

hi
In the BI Administration Tool when i try to create a “New Repository…” faced The connection has failed I try all of these solutions but dident work..
1-configured my “System DSN"
2-enter “TNS_ADMIN” for the “Variable Name” field and for the “Variable Value” enter the location of my OBIEE
3-copy the sqlnet and tnsnames.ora files into E:\obiee11gtmt\Oracle_BI1\network\admin and E:\obiee11gtmt\oracle_common\network\admin
4- put this in DSN with connection type OCI 10g/11g (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = IP Addr)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ))
please help me
regard

1.Place tnsnames.ora file in the following paths,
E:\obiee11gtmt\oracle_common\network\
E:\obiee11gtmt\Oracle_BI1\network\admin
2.Navigate to
E:\obiee11gtmt\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup\
Open user.sh file in a notepad
Set Tns_names paths as shown below with your tnsnames.ora file’s location,
set TNS_ADMIN=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN
The above path is of your installed Database tnsnames.ora file
I guess you didnt do this step. This will solve your issue.
Restart all the services
If helpful, please mark the answer.
Srikanth

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

On Import Metadata in Admin Tool get "Connection has failed" error

Hello,
I am attempting to import Metadata in Oracle BI Administration Tool v.11.1.1.5 and i get " "Connection has failed" error.
What is the solution? Thank you in advance, Sonya

Hi ,
My server is on Linux 64bit and client is on windows xp
i m facing the same error as connection has failed.
below steps are done:
1.Copy the tnsnames.ora from Oracle Database home (ORACLE_HOME\NETWORK\ADMIN\) to the following locations.
\OracleBI1\network\admin (Example: C:\OBI\Oracle_BI1\network\admin)
\oracle_common\network\admin (Example: C:\OBI\oracle_common\network\admin)
2.Set the TNS_ADMIN environment variable value with one of the copied locations in the step 1 in user.cmd or user.sh file depending on your OS. This file will be found under \instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup (Example : C:\OBI\instances\instance2\bifoundation\OracleBIApplication\coreapplication\setup)
Can u just me furthere steps for linux server.
Thanks

[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.

Post Author: LeeCUK
CA Forum: Authentication
I have installed Enterprise XIR2 onto a Windows 2003 server and all services are running.I have installed the client on another windows 2003 server and I can connect to the console via the web.
Firstly desktop intel would not work and gave me the error below, however a new entry appeared in my server dropdown with servername (.Net Portal) and after selecting this Desktop intell worked.
When I try to run designer I dont get the extra server in the dropdown nor does it connect when tryped manually and gives me the same error I was getting for desktop intel.
Im using enterprise authentication
Has anyone figured this out please?
The error im getting is below[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(hr=#0x80042a01)

Post Author: jsanzone
CA Forum: Authentication
LeeCUK:
The [repo_proxy 13] error seems to be a catch-all for BO in that I've worked with this software (XI R2) for 1 1/2 years now and each time I've encountered [repo_proxy 13] it has been for a different reason, thus, you're going to have to apply troubleshooting checks all over the place until you find the problem. In my particular case I just resolved my [repo_proxy 13] error I've been working on this week, and here was my scenario. Our server in the lab died due to a hard drive failure, so we cut our losses and installed a new & more powerful server. When the rebuild was done I could not connect from my laptop to the repository via Designer (good old [repo_proxy 13] error). After much angst, etc, etc I found out that the servers in the CMC (/businessobjects/enterprise115/admin/en/admin.cwrwere">http://<server>/businessobjects/enterprise115/admin/en/admin.cwrwere) were all down except for one (even though CCM showed all servers "up"). When I went to start the servers in the CMC I was prompted for an account, and no matter what account I tried it won't work. So I went back to the CCM servers and stopped them all, then changed the default account it was using from LocalSystem to the administrator account, restarted all servers in CCM, went back to CMC and noted that all servers were now up as well. Then I went back to my laptop and used Designer and was able to successfully log in. Thus, the end of my story, however, it seems that many [repo_proxy 13] errors have different beginning and endings. For instance, a year ago I had the same [repo_proxy 13] error and brought it to BO tech support. They determined that I had to uninstall my client from my laptop, clean out the registry for any references to BO keys, and remove the c:\program files \Business Objects folder, then reinstall, and sure enough it worked in that case, but not in this case when I tried it again. By digging deeper I found out the root cause to my current problem, and voila, I'm in!
Good luck!

Share operation dvd has failed QuickTime error 0

My 44 minutes long project in Final Cut Pro 10.0.9 project fails with a message: "Share operation DVD has failed, QuickTime Error: 0". I use OSX 10.9.
Yesterday, I rectified the situation by rebooting the system and starting to "share" again. To-day made a few extra corrections here and there but nothing simple works. I even removed the background photo from the DVD opening menu but no success :-((
Ross's earlier advice on this forum was:
"Select a short section of your project and export as a Pro Res master file.
If that also fails, turn off BG Rendering; delete project render files; copy the entire Timeline to a new project.
Russ"
Could you please be more specific. I am a novice to FCP.
1.How to select a short section ? Select 4-5 frames (yellow band) from the timeline ?
2. How to _export_ as a ProRes file ? From File > Share > Master File (default) ? (Or if it has to be an "export" perhaps File >Export XML ?)
3. How and where to turn off BC Rendering ?
4. How to delete project render files ? File > "Delete Project Redner Files" is not highlighted in the File menu, so how to select this action ?
5. How to copy the entire Timeline into a new project ? File >New Project ? Then select the whole of the old timeline, copy > paste into the new timeline ? Or a different method ?
I think that it is better to ask even some simple (for experts) questions ? :-)
Many thanks,
Kris

1) Either use the Range tool or set in and out points on the Timeline.
2) Either way will work. For example, Share>Master File and choose Pro Res in the Settings>Video Codec field.
3) Background Rendering can be turned off in Preferences.
4) Select the project in the Project Library first.
5) Create a new project with settings to be determined automatically by first clip. In the original project, Command-A and then Command-C. Open the new project, click in the Timeline window to activate and hit Command-V.
Good luck.
Russ

Urg: Not able to import data from DB in OBIEE 11g : Connection has failed.

Hi Team
Recently while working in OBIEE 11g , I was trying to import tables from the data-base but I am getting an error " Connection has failed " .
I have put the tnsora file in the network admin folder and the
C:\OracleBIHome\Network\admin
\OracleBI1\network\admin (Example: C:\OBI\Oracle_BI1\network\admin)
\oracle_common\network\admin (Example: C:\OBI\oracle_common\network\admin)
and have set the TNS_ADMIN variable in the User.cmd path with the above path .
But it is still not working . I have tried all the options but its still not working .
Any help is appreciated.
Regards
R

Is it Compulsory to give Schema and Work Schema while creating the Physical Schema in Oracle Data server?
This is mandatory to have a schema and a work schema here.
The schema and work schema could be the same user as the user who is connected to the dataserver!

The connection has failed while importing metadata in RPD

Hi All,
Recently I start creating a repository (OBIEE 11g client version 11.1.1.3.0) in offline mode and I want to import metadata which failed by the error ‘The connection has failed’..
Kind Regards,
Mohan

Hi Mohan,
Solution:
1.Copy the tnsnames.ora from Oracle Database home (ORACLE_HOME\NETWORK\ADMIN\) to the following locations.
* \OracleBI1\network\admin (Example: C:\OBI\Oracle_BI1\network\admin)
* \oracle_common\network\admin (Example: C:\OBI\oracle_common\network\admin)
2.Set the TNS_ADMIN environment variable value with one of the copied locations in the step 1 in user.cmd or http://user.sh file depending on your OS.
This file will be found under
\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup
(Example : C:\OBI\instances\instance2\bifoundation\OracleBIApplication\coreapplication\setup)
Thanks,
-Amith.

HT201197 how do i fix this (the share operation DVD has failed Quicktime error 0

Ho w do i fix this - The share operation DVD has failed Quicktime error 0

Select a short section of your project and export as a Pro Res master file.
If that also fails, turn off BG Rendering; delete project render files; copy the entire Timeline to a new project.
Russ

System Center 2012 R2 DPM Support Files installation has failed when running Remote SQL Prep on SQL server

I am trying to install DPM 2012 R2 and one of the pre-reqs is to run 'DPM Remote SQL Prep' before kicking off the DPM installation. My SQL server is 2012 SP1 and when I select this option, I get an error straight away telling me 'System Center 2012
R2 DPM Support Files installation has failed'.
Not sure how to troubleshoot this as doing a search did not bring up anything.

I am trying to install DPM 2012 R2 and one of the pre-reqs is to run 'DPM Remote SQL Prep' before kicking off the DPM installation. My SQL server is 2012 SP1 and when I select this option, I get an error straight away telling me 'System Center 2012
R2 DPM Support Files installation has failed'.
Not sure how to troubleshoot this as doing a search did not bring up anything.
Ignore this.
I launched the setup as Administrator and it worked!

How to fix: the share operation master file has failed quicktime error: -50

So Whenever i export my HD 1080p file in FCPX 10.0.8 i get this error "the share operation master file has failed quicktime error: -50"
Please help!!!!
It happens about 12% of the way in. My movie is only 10 minutes long.

Download it. Quit FCPX. select FCPX in this tool and and click on trash. Restart FCPX and try again to export. Empty trash. It will do no harm but you have to set your settings in preferences in FCPX after that. Every application has preferences files and they can become corrupt. FCPX will build new fresh preferences after you open it.

Error Adobe Photoshop 13.0.1.2 Installation failed. Error Code: U44M2P7

Help, issues with installing patch for photoshop cs6. Using Adobe cloud.
Error - Adobe Photoshop 13.0.1.2 Installation failed. Error Code: U44M2P7

Ian the link to the document is still working for me. Basically though the document asks you to download the update directly from our product update page at http://www.adobe.com/downloads/updates. If you continue to face difficulties or the update is not available then it will be necessary to review the installation log files for that update to see why it is failing.
You can find details on how to locate and interpret your installation log file at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

The share operation Blu- ray has failed. quicktime Error: 0

the share operation Blu- ray has failed. quicktime Error: 0 anyone any idea how i overcome this ?

Are you working with native media? If you are, see if Final Cut will let you transcode a clip to Pro Res 422. Do an export test with that single clip. (Write the output to a disk image so you don't waste a disk.)
Russ

SYSTEM ERROR: An accept of a new connection has failed: OS Error 4:

Similar Messages

Maybe you are looking for