System Error During Message Mapping

I've set up a simple mapping scenario that sends a DEBMAS06 IDoc from our R/3 system to XI mapping to DEBMAS06 and writing out to a file. I am getting the following system error during message mapping:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>Server repository could not create function template for 'SMPP_CALL_JAVA_RUNTIME</SAP:P1>
I have gone back to the Design Builder and tested out the message mapping and the interface mapping and both work successfully. I have also taken the payload of the message and submitted it via the RWB and it generates the same error as when sent from R/3. Any other places I can look?

Hi Mike,
You have got the connectivity issue problem between ABAP and J2EE stack. When do the test in the Message Mapping, thats the J2EE and it works. But during the runtime it has to go to the Integratin Server, which is the ABAP stack. Fix the connectivity issue, check the smicm,trace and debug log etc.
Hope this helps.
Cheers,
Ranjan

Similar Messages

Run time error during message mapping transformation

Hello,
i created a scenario and tried to execute . i got this error .
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ZCRM_CRMXIF_ORDER_SAVE_M01/IDOC/BEGIN. The message is: Exception:[java.lang.RuntimeException: Error: Occurred in RFC Look UpPlain exception:Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211) at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) ] in class com.sap.xi.tf._XiameterBasicRegistration_MM_ method crmRfcLookUp$[, , , , Test_ReceiverSystem, , com.sap.aii.mappingtool.tf3.rt.Context@26dd0a50]
can any one tel me wats going wrong ??

The error shows that you are using business system and comm. channel in UDF for doing some processing. The error is because it is not able to locate the specified comm channel for the business sytem.
please check if the comm. channel name and business system names are spelled correctly. Also you can try refreshing the CPA cache/ XI cache.

Error: "Operation (Message) Mapping ... does not exist" during activation

Hello Colleagues,
I face following problem at our PI 7.1 System.
After import and activating Integration Builder (Directory) Objects I received the Error "Operation (Message) Mapping ... does not exist" but the object (s) exist at Enterprise Service Builder (Integration Repository) at respective Software Component Version.
The individual Product and respective Software Component Version was created at SLD and imported at Enterprise Service Builder (Integration Repository). Afterwards Namespaces with different objects was created incl. the missing Operation Mapping.
As Check:
When I try to import under menu Tools\Apply Model from ES Repository at Integration Builder (Integration Directory) i see onyl SAP (SAP BASIS 7.1) Software Components.
I am not able to find any object regarding the individual created Product\Software Component.
So, i asume objects from the Enterprise Service Builder (Integration Repository) aren't available at Integration Builder (Integration Directory).
SLD cache refresh and application restart already performed.
Any idea?
Many thanks in advance!
Regards,
Jochen

Hi Laxmi,
attached short steps that we performed.
In general in upfront:
This behavior happend after import objects from DEV to TEST for Enterprise Services Builder (IR) and Ingegration Builder (ID) in addition manual object creation at SLD for Technical Systems and Business Systems.
We don't have (currently) a central SLD for each environments DEV, TEST, PROD (not finished setup up to now). For each environments we have a local SLD at PI (XI).
Deployment steps:
- Product and respective Software Component Version created under Software Catalog
- objects creation at SLD for Technical Systems
- objects creation at SLD for Business Systems
- objects imported from DEV to TEST for Enterprise Services Builder (IR) incl. save and activation
- objects imported from DEV to TEST for Integration Builder (ID)
- manual configuration for communication channels performed
- after save and activation i received following error message: "Object Operation Mapping: ... does not exist.
Because of this error message I thing objects out of the Enterprise Services Builder (IR) aren't available at Integration Builder (ID) but i don't know the cause.
Could you help me to understand this behavior?
Many thanks in advance!
Regards,
Jochen

System error during RFC call BAPI_FIXACCOUNT_GETLIST

Hi Gurus,
Below are the error and steps when i perform Payroll Posting to Accounting. To enable communication between distributed systems, the appropriate method have been specified in ALE Customizing for the objects of the following tables. (Basis -> Application Link Enabling (ALE) -> Modelling and Implementing Business Processes -> Maintain Distribution Model and Distribute Views.)
However, error still exists as shown below:-
1.     Run TCode PC00_M99_CIPE
2.     Encountered Error as shown below:
Communication error with system QAS, function FI_ACCT_DET_HR
Message no. 3G404
Diagnosis
The function module "FI_ACCT_DET_HR" has been called remotely in system "QAS". As a result, an error occurred when creating the connection or during communication.
Procedure
Check that the ALE distribution model is correctly maintained.
Account determination could not be performed
Message no. 3G361
Diagnosis
The account could not be determined for one of the following reasons:
No destination could be found in the ALE distribution model for the AcctngEmplyeeExpnses.Check method.
A system or communication error occurred when executing the function FI_ACCT_DET_HR in the target system.
System error during RFC call BAPI_FIXACCOUNT_GETLIST: / CPIC-CALL: 'ThSAPCMINIT' Unknown serv ice
Message no. KI012
3.      Check in SM21: NiConnect Unsuccessful, Return Code: -0003
                    Communication error, CPIC return code 020, SAP return code 665
Please advice. Thanks in advance.
Best Regards,
Fung

Hi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

System Error During Insert (Table KNMT SUBRC 4)

Hi All,
I am getting a peculiar error when i try to update KNMT table using the FM RV_CUSTOMER_MATERIAL_UPDATE.
When i run it directly in debug mode, entries are getting created perfectly.
But when i run it through RFC, before the FM is executed itself, during validation, i am getting an error in the message queue stating "System Error During Insert (Table KNMT SUBRC 4).
I cheked that KNMT table is empty. Also i had deleted all entries using the standard transaction VD52.
I found that there is a certain FM RV_CUSTOMER_MATERIAL_UPDATE_C which is described as Posting program for customer-material info (CALL mode).
But i am not sure what this does. I cannot view the documentation in my system and also this FM does not have any parameters.
Kindly let me know if anyone has encountered an error like this... Please let me know of any suggestions for resolution.
Thanks & Regards,
Mz
P.S : The Functionality seems to work intermittently... though not when i want it.
Edited by: Mazin Mahmood on Dec 8, 2011 9:09 AM

Hi,
The issue was that i was calling the function module RV_CUSTOMER_MATERIAL_UPDATE using an RFC.(ABAP Proxy) For some reason, while using an RFC, there is some issue with this function module and the database commit .
I had to recode using BDC (for transaction vd51) approach for creating a record in KNMT.
Thanks All,
Cheers,
Mz

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

RFC lookUp during Message mapping

All
I want to get soem values from SAP table during message mapping.After getting the values am going to do 2:1 mapping by using BPM.
Could you please let me know the basic and fundamental things about RFC look up during mapping and RFC settings in XI as well in R3?
Please explain

Hi Rajesh,
Pl post this in XI Forums to get quick replies.
Regards
Ayyapparaj

Java heap space error occured during message mapping of FILE to IDOC

hello Friends,
I am trying to do the message mapping for File to Idoc scenario.
Idoc which I am using is HRMD_A.HRMD_A06 and infotype which I want to update is 14. I am trying to map the message type which I hav created for infotype 14 with the IDOC
Its very simple scenerio but every time I try to save the mapping before activating it I get an error:
Java heap space
Internal problem occurred (INTERNAL_PROBLEM)
Java heap space.
I am not able to figure out what possibly is the problem wheather its from my end or the BASIS end.
Kindly help.
Regards,
Lokesh

As the server probably survives (you restart your Integration Builder and can probably connect immediately), the problem will be on your side (client). Did you add one or more large xml-test-instances to the mapping ? If yes, delete them, because they lower the performance and can make problems. If not, then this is a strange problem. Even if the Idoc structure is complex, the mapping object itself cannot be that large.Is this problem only with this one mapping ?
CSY
Edited by: Christian Sy on Mar 9, 2010 6:26 AM

How to get the message ID generated by the PI system during message mapping

Hi All,
I have a file to file scenario, where during the mapping, I want to map and send the Message ID generated by PI.
Can anyone please help me with this?
Kind regards,
Joe

Hi,
You have write UDF for this.
Please see the below code .
java.util.Map map = container.getTransformationParameters();
String MesID = (String)map.get(StreamTransformationConstants.MESSAGE_ID);
return MesID;
Hope this helps to you.
Regards,
P.Rajesh

Runtime error in message mapping.

Hi experts.
My scenario is File --> PI --> File.
During the message mapping there are a few RFC lockups.
I have configured an communication component for the RFC destination, and a Receiver communication channel to the RFC system.
When I am trying to check the message mapping and the operation mapping from the integration builder every thing works just fine.
In the interface determination i have configured the rfc parameter for the mapping.
When I am trying to run the hole process i receive an error saying:"Runtime exception from: java.lang.nullPointerException:
null at com.sap.guid.GUID.parsHEXguid(guid.java:1015)
reguars Max

Hi.
As i have already said when I am trying to test the same operation mapping directly in the integration builder with the same message, it passes the mapping without any exceptions.
I think the catch may be in the fact that there are a few rfc calls inside the graphical mapping.
Any suggestions?
Regards Max.

Set a variable in Adapter Module and read it during message mapping

Hi guys,
is there any way, how I could set some variable and store its value during the adapter module processing and read back this value in message mapping and use it? Without using a database or files.. I mean, some j2ee storage or something like that..
Thanks for your help,
Olian

Hi guys,
thanks for your answers.. just a clarification, what the problem is.
I need to validate a message in the adapter module, if it's digital signature is valid. If it is, I need to send back to the sender a return code (message) OK, otherwise ERROR. I can't modify the message (or dynamic configuration) as I'm using a WSS in the sender channel. The system doesn't allow me to change anything in the message, so I can't find out in the mapping what the validation result was. I then tried to do the validation directly in the message mapping, but I have some issues there with libraries or what, because the validation code, which works in the adapter module, doesn't work in the mapping java class. So my final thought was maybe I could validate the message in the adapter module and pass the result to the message mapping and then create an appropriate return message (in the mapping). However, I see no way of passing a value there. I'm stuck and have no Idea how to resolve the problem. Any hints guys?
Thanks a lot for your help!
Olian

Error in Message-Mapping transformation

I'm getting an error while processing the data from JDBC to SAP through IDOC's.
During the application mapping com/sap/xi/tf/_MM_HRMD_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~
while testing the mapping in IR (message mapping) it got succesfull.
while testing the mapping in ID (Test configaration) with inbound payload we are getting the below error.
interface Mapping
... (173 lines)
Please provide the solution for this...

Hello,
Check out the trace thorougly in MONI as at which node/field the error is occuring.
W.r.t ID testing,kindly check your interface determination(sender,receiver parameters and also the inbound interface etc)
Regards
Madhu

Error in message mapping of IDoC Invoic02

Hi,
i have imported the invoic02 idoc into PI system. i have mapped the required field os idoc with standard XSD which is imported through ED. I'm able to most of the fields with idoc and XSD. however, some of the node in xsd are repaeting.
so here the part of xsd with which i'm mapping.
(first_node)ListOfTaxSummary                      0..1
(second_parent_node)TaxSummary                   1..unboubed
(child_node) tax                                 1..1
(element)TaxAmount                                0..1
(element)TaxCategoryCoded                         0..1
here the i have mapped ListOfTaxSummary    with the idoc node E1EDS01
TaxSummary with E1EDS01
tax with E1EDS01.
i tried all possibilities with different mapping. but i'm able to get the tax node under taxsummary with the element. the problem its been repeated as E1EDS01 idoc repeats.
please help us in solving this problem.
Thanks
Kind regards,
Lalitkumar.

Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
The error mentions that you have used an IDOC in your mapping program which is not found in the ESR....you need to check if the IDOC is present in the ESR and is present under the correct SWCV.
Once you have done the check do some dummy change to the mapping and activate it (if in DEV) and then check the CACHE.

Error in Message Mapping "Target message IDOC: ORDRSP.ORDERS02 does not exi

Hi,
I have joined newly to the team.
When I tried to open one message mapping it throwinf follwing error...
"Target message IDOC: ORDRSP.ORDERS02 does not exist in software component version ID: 44423362454456485465..
Check whether the software component version ID: 44423362454456485465 is in Enterprise Service Repository. Import this version if necessary"
Is there any impact because of which in the message flow?
In my case some of the messages are failing with mapping error "runtime exception occured during application mapping com/sap/xi/tf/_SUS2MMOrderResponse_; java.lang.NullPointerException: while trying to invoke the method java.util.Map.get(java.lang.Object) of an object loaded from field com.sap.aii.map`"
And some of the messages are processed sucessfully and they also using the same mapping program 'SUS2MMOrderResponse'.
Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
Regards
Baskaran K

Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
The error mentions that you have used an IDOC in your mapping program which is not found in the ESR....you need to check if the IDOC is present in the ESR and is present under the correct SWCV.
Once you have done the check do some dummy change to the mapping and activate it (if in DEV) and then check the CACHE.

System Error During Message Mapping

Similar Messages

Maybe you are looking for