System Error &H80040000(-2147221504). Invalid OLEVERB structure

Hello Gents,
When I am opening a workbook through Bex analyzer, I am getting the below mentioned error
"System Error &H80040000(-2147221504). Invalid OLEVERB structure"
_System Details_
Operating System : SunOS
Database : Oracle 10.2.0.2.0
SAP BI 7
Our system is planning system. Users are getting the error while tried to save the values entered in the workbook.
Searched lot in sdn but no clue what so ever. Can anyone please help.
Thanks
Deb Deep

Hi Larry, this sounds more like a RAM issue, possibly logic board.
Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some Discs have it inexplicably on Disc #2.
The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
Memtest OS X...
http://www.memtestosx.org/joomla/index.php
Rember is a freeware GUI for the memtest ...
http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

Similar Messages

Dreamweaver CS5 fatal error XML parsing: Invalid document structure, line:1, File: C:\User\Tyler\App

XML parsing fatal error: Invalid document structure, line: 1, file: C:\User\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configureation\Workspace\Classic.xml
I have gone through older disscussion forums and have followed the steps recommended by deleting the corrupted .xml file itself (in this case "Classic.xml") but imidiatly after when i try to open Dreamweaver again, i am prompted with the same fatal error message including the file that i have just deleted. Next i deleted the entire configure file and this did not help either.
It is also odd that when i follow the path to find the corrupted .xml file from the prompt, the path is different in that i do not find the "Classic.xml" file through th "en_US\Configuration\Weorkspace" navigation, however i do find the corrupt "Classic.xml" file in the "configure" folder of the "Adobe Dreamweaver CS5" file.
Im not sure what to do now and i would really like Dreamweaver back up and running so please help if you can!!!
Thanks
-Tyler

Step 1: Close DW, Navigate to C:\User\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configureation\Workspace\ and delete that Classic.xml file
Re-open DW. DW should auto-create your Workspace layout XML file again. See if it works fine.
PROCEED TO STEP 2 ONLY IF STEP 1 DOESN'T SOLVE THE ISSUE
Step 2: Navigate to C:\Users\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en-US\Configuration and delete the entire 'CONFIGURATION' folder. Re-open DW. DW should auto-create your configuration folder based on predefined layouts and config options. This will definitely fix your issue.
Reason for this issue: This issue would have been caused due to a malformed workspace layout configuration. That may happen due to customizations you may have done to the layout/ improper file permissions/ improper shutdown on Windows.
See if these fixes resolve your issue and post your results here.
Cheers,
ST

XML parsing fatal error: Invalid document structure, line: 1, file: ... (in this case "Classic.xml"

dreamweaver not initiating..claiming a parsing fatal cerr because classic.xml is corrupted. I tried re-installing dreamweaver... nothing

See here Dreamweaver CS5 fatal error XML parsing: Invalid document structure, line:1, File: C:\User\Tyler\App

ORA-40101: Data Mining System Error ORA-40101: Data Mining System Error ORA

Hi,
I'm using Oracle 10.2.0.1.0 with Data Mining. I was able to build and apply models on my data using the OD Miner tool. However, I'm unable to do so programatically. Even the demo programs give the same error
ocBuildTask_jdm is started, please wait. ocBuildTask_jdm is failed.
Failure Description: ORA-40101: Data Mining System Error ORA-40101: Data Mining System Error ORA-40104: invalid training data for model build
ORA-06512: at "DMSYS.DBMS_DATA_MINING", line 305
ORA-06512: at "DMSYS.DBMS_JDM_INTERNAL", line 157
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "DMSYS.DBMS_JDM_INTERNAL", line 179
ORA-06512: at line 1
--

Thanks, George. When I try to bin the data (using a modified version of the dmocdemo.java), I get the following error
Failure Description: ORA-44002: invalid object name
Details -
I'm trying to cluster data in my table (see desc below) based on values of evt_hostname, evt_key and evt_username;
SQL> desc sc.sc_event_store;
Name Null? Type
EVT_SEQNO NOT NULL VARCHAR2(64)
EVT_HOSTNAME NOT NULL VARCHAR2(64)
EVT_TIMESTAMP NOT NULL TIMESTAMP(6)
EVT_ID NOT NULL NUMBER(8,2)
EVT_CAT_ID NUMBER(8,2)
EVT_SERVERSTATE NUMBER(8,2)
EVT_USERNAME VARCHAR2(64)
EVT_KEY VARCHAR2(2048)
EVT_VALUE VARCHAR2(64)
EVT_RECUR_TAG NUMBER(15,2)
EVT_CLUSTER_ID VARCHAR2(64)
I've modified prepareData() in dmocdemo.java like this
isOutputAsView = false;
inputDataURI = "SC.SC_EVENT_STORE";
outputDataURI = "OC_BINNED_DATA_BUILD_JDM";
// Create boundaries for all numeric attributes
OraBinningTransformImpl buildDataXform =
(OraBinningTransformImpl)m_binningXformFactory.create(
inputDataURI, outputDataURI, isOutputAsView );
//buildDataXform.setLiteralFlag(true);
String[] excludeColumnList = {"EVT_SEQNO","EVT_TIMESTAMP","EVT_ID","EVT_CAT_ID","EVT_SERVERSTATE","EVT_VALUE","EVT_RECUR_TAG","EVT_CLUSTER_ID"};
buildDataXform.setExcludeColumnList(excludeColumnList);
buildDataXform.setNumberOfBinsForCategorical(125);
//buildDataXform.setNumericalBinningType(OraNumericalBinningType.auto_equi_width);
buildDataXform.setCategoricalBinningType(OraCategoricalBinningType.systemDefault);
xformTask = m_xformTaskFactory.create(buildDataXform);
executeTask(xformTask, "ocPrepareBuildTask_jdm");
The executeTask() function tries executing the task, but returns with
Failure Description: ORA-44002: invalid object name
Any insight/help will be greatly appreciated.

I got the dreaded "Invalid Node Structure" Error

Hi All,
I entered the Mac world recently with a spanking new Macbook Pro 15". Updated it online to the latest OS 10.6.4 Snow Leopard.
Today I was trying to install some more free application from the Official Mac Software Site. After installing a couple of softwares, I popped in the included recovery Disk and tryed installing xcode from the 'additional software' folder on the disk. But this failed
After this I thought of restarting the mac and try again. However, the **** thing now wouldn't boot anymore. Just stays on the Gray apple screen with the small ring rotating below it for ever.
Then I tried repairing it using the Disk Utility booting form the DVD. On verify Disk, it shows 'Invalid Node Structure'. So I clicked 'Repair Disk', And it just stayed there for ever without any progress. So I stopped it. And after trying the above 3-4 times, I Hard rebooted the system, and this time entered the console mode (Command + s).
Entered the command fsck_hfs -rf /dev/disk0s2 (disk0s2 is what Disk Utility showed me).
The output of this command shows:
** /dev/rdisk0s2
Executing fsck_hfs (version diskdev_cmds-491.0.2~7).
** Checking Journaled HFS Plus Volume
** Checking extents overflow file
** Checking catalog file
** Rebuilding catalog B-tree
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
And this goes on and on and on.... :((
Now what to do???

Hmmm, yeah that could be the last option, but I can't format the disk right now, 'cause I've some extremely important (not-yet-backed-up) files in it
So I'd like to try out all possible ways to recover the system before even thinking of a format!
BTW, the above fsck_hfs command I ran was by booting from the DVD itself.

Invalid Node Structure error

Hi All,
I need some information on how I might solve a problem. I ran my Disk Utility earlier today to verify the HD on my MacBook Pro because my computer just seemed a bit off. It froze the other night when I shut it down.
Here is the message I received:
Verifying volume "Macintosh HD"
Checking HFS Plus volume
Checking Extents Overflow file
Checking Catalog file
Invalid node structure
The volume Macintosh HD needs to be repaired
ERROR: The underlying task reported failure on exit
1HFS volume checked
Volume needs repair
I booted the computer from the original OS X Install Disc and tried to repair the hard drive, which didn't work. That's when I started reading the Tiger Forum. I have since discovered that this error cannot be repaired from the Install Disc and probably will require an erase and re-install. However, I did read about a 'fsck' command.
I would like to give this a try, but am not at all comfortable with running commands. Would someone be willing to walk me through this and/or offer any other suggestion for fixing this?
Thanks

Michelle,
Sounds like you are really learning a lot in a hurry. That's good. I can't tell you how long it will be before your system "acts up." I would take this opportunity to backup any really important data to DVD/CDs while you are in the process of getting an external drive and Disk Warrior.
Good question about whether your file system error will be copied to you external drive when you clone with SuperDuper or Carbon Copy Cloner. I don't know exactly but it will certainly be better to have a backup that may be slightly imperfect than to have no backup at all. Of course, after you fix the error on your internal drive with Disk Warrior, then you will reclone your repaired system to your external.
Regards,
Steve M.

Macbook Leopard 10.5 is not booting up and not even getting Verified Error : Invalid Node Structure

Hey, I am using Macbook Leopard 10.5, Yesterday while i was working it was on low battery i thought to connect it later, but all of a suddent its stopped fucntioning and everything goes blank. I thought it might be a Battery problem, but even after connecting charger for 2-3 hours, its not booting up. Only the Apple screen comes and then it goes shut down automatically.
I even tried to fix it using Apple CD, Disk utility, When i tried to Verify the disk It shows following error :
Disk cannot be repaired or verify.
And details : Invalid Node structure
Volume needs to be repaired error : Filesystem verify or repair failed.
I have very important Data on this disk, so i cannot even erase it.
Suggest me somehting. It have enough space to install new OS but System shows you need erase it.
I have tried to use Apple Hardware test by Holding D key, But its not working.

Helloi
http://supportdb.alsoft.com:591/FMPro?-db=alsoftsupport&-lay=main&-sortfield=Dat e&-sortorder=descend&Keywords=node&Product=%22%22&-op=lte&Date=%2F%2F&-max=15&-f ormat=AlsoftSupport-qa.html&-script=counter&-token=177&-Skip=0&-find

Dreamweaver stopped working. XML parsing fatal error: Invalid document structure, line1 Tried reloading DW. Didn't work.

Dreamweaver (CS5) stopped working. The error message says - XML parsing fatal error: Invalid document structure, line: 1, I tried to reload DW. No change. I also tried to reset the computer to an earlier date before I reloaded. Also didn't work. Can anybody shed some light?

The first thing to try is Deleting Corrupted Cache. Be sure to turn on Hidden Files & Folders in your file manager (Win Explorer or Mac Finder).
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CC Cleaner Tools below to wipe DW from your system, followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Keep us posted on your results.
Nancy O.

Error invalid location structure for this operating unit

Dear all
when go to Receivables > setup> tax > locations i get this error and i can't solve it
invalid location structure for this operating unit
any one can help

Hi
In system option u have to define the tax type .there is a tab in system option Tax and Defaults.select u r tax type and enter the tax code.
Regards
Ahmed

Invalid Extract Structure error while creating "Generic DataSource" on a view...

Dear All,
I have created a view on following tables MARA, AFKO and MSEG. The Table/Join condition is as follow:
AFKO--AUFNR = MSEG--AUFNR
AFKO--PLNBEZ = MARA--MATNR
I have included all the fields from MSEG and other all fields from MARA and AFKO. The view is created successfully and contents/records are also being fetched/displayed from this view.
See screen shot as well:
But when I go to RSO2 to create a "Generic DataSource" on this view. I get a series of warning messages and then error message "Invalid Extract Structure" and therefore I'm unable to create my DataSource on this view. See below screen shots of warning and error messages.
Other warning messages are as follow:
Field GAMNG with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Field PLSVB with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field PLSVN with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field LODIV with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Following is the screen shot of error message:
1. How can I get rid of this error message and be able to create my "Generic DataSource" on top of this "View"?
2. What should I do to resolve the above warning and error messages?
I will appreciate your reply.
Many thanks!
Tariq Ashraf

Hi Vipul,
as you can find in CKIS table, the reference feild for value feild "WERTN" is missing.
As per the table the reference feild is HWAER. This should have been used in place of FWAER.
Try mentioning this in your view and this should work.
Also I am a little enthusiastic to know, what are you trying to get from the datasource.
If you are trying to get the cost estimate of multi level BOM, not (just one child level), then this approach may not work.
There is a BAPI that gives such itemization split. Just FYI, in case you are looking for multi level explosion.
"BAPI_COSTESTIMATE_ITEMIZATION".
Hope this helps.
Naveen.A

I have Dreamweaver CS5.5 and all of a sudden I can't open it says XML parsing fatel error. Invalid Document Structure What do I do? Thanks

I have Dreamweaver CS5.5 and all of a sudden I can't open it says XML parsing fatel error. Invalid Document Structure What do I do? Thanks

You need to rename the Configuration folder to Configuration_BU.
The folder can be found by following this http://www.dmxzone.com/go/16740/clearing-dreamweaver-s-cache/

Invalid Directory Structure Error

So I recently purchased a Panasonic AG-HMC40 and it's my first experience with a non tape camera. When I tried to get the footage onto my computer Final Cut wouldn't recognize it. It worked in iMovie but I would rather not lose quality by transferring it through that first. When I try to open the folder within the log and transfer screen I get an error message that says that it contains unsupported media or "Invalid Directory Structure." I'm on FCP 6.0.5.

I quite believe it.
Can you exactly describe what you're doing and how FCE behaves?
Do you see a preview of the clips after connecting the camera?
Try to import using iMovie, when this works, it should in FCE somehow, too.
I googled a bit around and found someone having the same problem (but unfortunately in german language).
He has formatted the SD card using the camera, then it worked. But the clips beeing on the SD card before are still lost. But if you backup before, you can convert the .mts files into .mov and then import it into FCE.
Some other possible source of errors:
- is the HF 100 power cable connected for transfer? (it has to be)
- did you see the "mode selection" screen when connecting to your Mac?
- if yes, did you select the "PC mode" there?
- does the USB port you are using work with other devices?
- can you try using an SD Card reader instead of the camera?
- do you see the camera device icon after connecting to your mac?
- can you try it on another Mac if it works? (if not, it may be a manufacturing issue)
At moment no more ideas...

I have an error of invalid node structure

I have an error of invalid node structure. Can I save my data from my hard drive? Is it even fixable?

Invalid Node Structure is not a hardware failure, it never was (you may still have a hardware failure, but the Invalid Node error is not indicative of this problem.
Still, Disk utility will certainly fail to fix it, and DiskWarrior will probably fail too.
But don't despair. Try this, and don't give up till you've tried it at least three times.
First, get the name of the partition of the failing volume.   You can get it most easily by finding your disk in Disk Utility, selecting your partition (not the drive) and type cmd-i.    Look for "Disk Identifier" right at the top.
Then, open up Terminal, and type this:
sudo /sbin/fsck_hfs -yprd /dev/disk5s2
substituting your disk identifier for the one already here.   Keep the "/dev/" part.   Enter your password, and wait. It may take a while. I have had this fail several times before finally working so its important to keep trying.   It's faster than a reformat!!!
If the afflicted disk is your startup disk, you will need to do this in recovery mode: restart the computer, hold down option, and wait for the disk options to appear.   Select that, then proceed to Disk Utility and then Terminal as described above.
Good luck, and always keep a backup!
chris watts

Recurring "Invalid Node Structure error"

Hello all,
Starting a new thread with this one....
Have done 5 complete re-partitions, clean SL installs and back ups from TM in the last four days. DU disk checks out fine after re-install, DU comes up clean.
After a few hours, the hanging beach ball returns, I run DU and get the "Invalid Node Structure" error message.
This in on the iMac that is 42 days out of Apple care......
Ran techTool after the last install, and it comes up clean....
What's the soultion? Nuke the drive and get a new on on my dime?
I've repartitioned, zeroed out the data and sit here with a naked drive, I really don't want to spend another day loading it up if it's shot....
The TM files and drive I'm backing up from check out fine.
Thanks,
Mark

Took 3+ hours. Came up clean. I have not restored from TM yet. Did the SL updates ect.
Repaired permissions, ran DU it comes up clean.
I will do some net surfing tonight (that's all I did this morning) still without loading the back up data, and we'll see if I get the beachball of death.
I will run another surface scan when I hit the hay, and see what it says in the morning.
If that is clean, I will restore the back up data, and run the surface scan again.
One step at a time until I can recreate (or not) the failure mode.
Tedious, but I have to get to the bottom of this. I don't want to load any of the TM back up on to the Mac Air until I'm sure it's not a software issue.
Mark

Invalid node structure error when verifying hard disk, please help

My 27" Mid 2011 iMac is having hard disk issues. I attempted to repair the disk but received an error that said the disk cannot be repaired and needs to be re-formatted. I have all my files backed up to an external hard drive so I erased and formatted the disk. After reformatting, I ran the verify disk function and got the message saying the HD appears to working properly. I reload OSX Lion and within a day, my computer freezes up and acts as if something is wrong. When I run the verify disk, I get the Invalid Node Structure error multiple times and then the message saying the disk cannot be repaired and I need to reformat the drive. I have completed this process several times and have had no luck. I have looked at a few forums with people who have had somewhat similar problems but am still unsure. I have seen people recommend programs like Disk Warrior to repair issues the hard disk utility cannot but I don't want to spend $100 dollars on this program if my hard disk is damaged and needs to be replaced. Any suggestions? Thank you

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.

System Error &H80040000(-2147221504). Invalid OLEVERB structure

Similar Messages

Maybe you are looking for