SYSTEM ERROR, IDOC_ADAPTER, Unable to convert ALE to logical system

Hi,
I just wanted to check when i am using SXMB_IFR for monitoring then in message monitoring ---> if i check for Integration server as a whole i Find error as SYSTEM ERROR but if i check only for Adapter engine I get all the idocs successful.
So what we have to monitor the whole integration server or adapter engine only

saras,
When you see successful in the Adapter Engine, what it impliesis that the Adapter Engine has picked up the message ( file in your case ) and then passed it to the Integration Engine for processing ( this is where the actual pipeliining steps take place). As far the adapter Engine is concerned the message has been passed to the integration engine and so its job is done.
The error you see in Integration Server is becuase it includes the status of the messge in both the adapter Engine and the Integration Engine. You messages has errored out in the Integration Engine and so the problem!
Just rememebr this terminology --> Integration Server is the runtime of XI which in turn contains the Adapter Engine and the Integration Engine.!!
Regards,
Bhavesh

Similar Messages

Envy 5534 on MAC- print error message unable to convert post scrip file

New printer set up fine prints letter but when I want it to print a page with bar code on get error message :-
print error message unable to convert post scrip file
Can any one help please
This question was solved.
View Solution.

Hi @itsalex,
What type of bar code are you printing, and from what program? Just a thought, what if you print the barcode as an image, if you are not already? Try File>Print> Advanced> Print as Image> print.
If the issue persists, let's reset the printing system and repair the disk permissions; doing so may resolve the issue.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer drive. In the screenshot below, you will see Airprint is auto selected, you can change it to the HP driver though.
I look forward to hearing back from you.
Talk to you later alligator
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Getting error message ' Unable to convert sender service to an ALE logical

Hi,
I am using idoc to file.
and my xi system is working fine. at sudden when i process one idoc . I got this message.
Unable to convert sender service to an ALE logical system
Here in monitoring, i am able to see the success falg but in acknowledgement column, i see system error..
I did no change in configuration.
Your inputs will be appreciable.

Hi,
Also, is it possible that the XI system was recently upgraded?
As you indicated that no config changes were done, therefore, such error should not just pop up with no reason.
In an earlier release of XI (sorry I cannot recall the SP level), IDOC ack was not provided. However, in a later release, it is the default.
Regards,
Bill

How To Print After Error Msg: Unable to convert postscript file

We installed "Maverick" on our MacBook Pro and our printer is a HP 8600. We were unsuccessful in getting our Adobe Acrobat Professional 8 to print our PDF files. Instead, we got the error msg: Printing Stopped: unable to convert postscript file. We have used this application for years without any problems. How do we solve this problem so that our application WILL "convert postscript file" or do we have to spend several hundred dollars to upgrade?

I think we solved the problem. Instead of looking for the solution via Adobe, we went to our printer info online, which was the HP OfficeJet 8600. We found special printer drivers for our newly installed Maverick operating system for our MacBook Pro. After downloading and installing the new drivers per the directions, we tested printing a pdf document and it was printed without any problem.

Error message: Unable to cast object of type 'System.DBNull' to type 'System.String'

Hi everyone, I have recently installed a trial version of SDL Trados (a computer-assisted translation software) and at some point (when I try to create a new translation memory) this error message appears: Unable to cast object of type 'System.DBNull' to type 'System.String' Is this a problem with the software or the laptop ? If it's the laptop, can you please help me solve this ? Thank you,Caroline

Actually there was not problem witg the laptop ! Please ignore this topic. Thanks.

IDOC error - Receiver of IDoc is its own logical system

hi,
i have a requiremnt to generate the IDOC for the same and same client. actually i have to get the data from application server and i have to generate the IDOC.
for this i have created a Zreport and passed the data from application server to segment and i called the
FM "MASTER_IDOC_DISTRIBUTE". after executing the Zreport, IDOC is generated and show the error
status as 29.i.e. Receiver of IDoc is its own logical system.
my logic is as follows.
MOVE 'LS' TO w_edidc-rcvprt.
MOVE 'SBECLNT130' TO w_edidc-rcvprn.
MOVE 'ISU_MR_UPLOAD' TO w_edidc-mestyp.
MOVE 'ISU_MR_UPLOAD01' TO w_edidc-idoctp.
pls let me know the solution for this problem.
Regards,
Balu

Hi Reddy,
please let me know how did u solve this issue, even i have the same requirement and am gettign status 29.
Thanks
Rakesh

I get this error message: AutoPostToeCollege(): Internal System Error. Unable to connect to the remote server

I get the following when I try to use the bookmark for Corinthian Colleges, a bookmark I've successfully used for nearly two years. With the recent update to Mozilla, it no longer works.

I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Unable to convert the sender service XID_900 an ALE logical system Error~

Dear Expert:
I received a IDOC Ack but there is an error ocour~
Unable to convert the sender service XID_900 an ALE logical system
XID_900 is our business system that config in SLD.
it's very weird ....sender server should be like point to our BPM isn't?
Regards
Jack Lee

hi,
>>>it's very weird ....sender server should be like point to our BPM isn't?
this means that your XID_900 business system in Integration directory
does not have adapdater specific identifiers filled in
it has nothing to do with a BPM
also check out my blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Michal Krawczyk

Regarding Error: Unable to Convert Sender System to ALE Logical System

Hi friends,
in File to IDoc scenario, i created a sender business system called bs_filetoidoc_send based on Standalone technical system and a receiver business system based on ABAP r/3 system. in my SAP IDES system which is dual stack (abap+java), XI client is 001 (LS: devclnt001) and r/3 client is 800 (LS: t90clnt090) i.e i'm posting idoc to t90clnt090.
I tried to send a text file. but while processing xml message in XI, i got an error saying "Unable to Convert Sender System to ALE Logical System".
then i searched the blogs and forum and found the solution. it was saying LS name was not assigned to BS bs_filetoidoc_send. so i went to SLD and tried to assign LS devclnt001 to my sender BS bs_filetoidoc_send, but got an error saying that "A business system with LS devclnt001 already exists". when i checked which is that BS, it is supposed to be the INTEGRATION SERVER itself with BS name INTEGRATION_SERVER_DEV.
then i configured my sender BS as INTEGRATION_SERVER_DEV itself which picked up the text file successfully and also receiver abap server received the IDOC with correct data and format with status 51. so scenario worked fine when i used my sender BS as INTEGRATION SERVER itself.
please clear my following doubts which arose after this scenario.
1) why the scenario didn't work when I used only standalone sender business system?
2) why should we assign a LS name of XI server to sender business system only in this scenario?
scenario worked according to my requirement, but using integration server itself as a sender BS confused though.
Many Thanks.

1) I can create any no of LS names using SALE
Yes you can create.
> 2) But I can assign a client to any one of those LS names (or 1 client will have only one LS name associated with it)
One Client will have one LS associated to it...and that can be any one of the LS..created.. use SCC4 to find the associated Ls for all the clients of a system
3) So anyways INTEGRATION_SERVER_DEV has to associated with the client 001 only, so finally I have to use INTEGRATION_SERVER_DEV only as my sender BS. Probleum is that I can't remove the LS name DEVCLNT001 from INTEGRATION_SERVER_DEV and assign it to bs_filetoidoc_send BS right. If I do so, I think I would get an error saying that INTEGRATION_SERVER_DEV is not associated with the LS name of client 001.
As the logical system defined in Partner profile is expected to arrive in Control record of IDoc..it should be passed in that...
Did u checked this blog../people/rajeshkumar.pasupula/blog/2009/03/16/unable-to-convert-the-sender-service-to-an-ale-logical-system so as per you need the explaination in the blog need to associate the logical system name .
HTH
Rajesh

Unable to convert the sender service PPG to an ALE logical system

Hello all,
maybe anybody can help or give me further information.
I have set up a scenario to send IDOC from a business system ( ERP ) to a business service ( EXT ).
Receiver is a linux system so I use the FTP-FILE adapter as communication channel.
The send-process is so far ok.
Here my tests:
1) exclude the specific IDOC in IDXNOALE table ( means no technical acknowledgment for this IDOC )
     result :
     a) message in SXMB_MONI:   status-flag: processed,   acknowledgment-flag: not in use
     b) message in RWB-Monitor: Sender ERP -->   Receiver EXT   ok
2) But I would like to have a system status.....   here now the problem
    add specific IDOC into IDXNOALE table   ( for request acknowledgments )
    result:
    a) message in SXMB_MONI: status-flag: processed,   acknowledgment-flag:   acknowledgment not possible
                                               --> error message: unable to convert the sender service EXT to an ALE logical system
    b) message in RWB-Monitor: there are now two message,
         first:        Sender ERP -->   Receiver EXT   =   ok
         second:   Sender EXT --->   Receiver ERP =   system error
                         Receiver-Interface is : http/ww.ahlstrom.com/EXT/ MI_IN
   3) furhter tests:
        a) change FTP apdapter channel ( put some wrong settings )
              message in SXMB_MONI:   status-flag: processed,   acknowledgment-flag:   contains system errors
              message in RWB-Monitor 3 messages ( one ok, and two error messages )
         b) changed only the receiver communication channel to HTTP ( other extisting scenario )
              then the acknowledgment works fine wihout errors.
              I'm wondering, but here Receiver-Interface is:   http://sap.com/xi/xI/Message/30/Acknowledgment
Summary: The process works, but strange:
                  message in SXMB_MONI: unable to convert the sender service EXT to an ALE logical system
                  message in RWB: system error
                  No problems with HTTP adapter
Regards,
Reinhard Doeker

Hi,
Addition to the above said by Udo...
for routing the ack back to the sender system you need to create communication channel of type idoc with name as Ack.....
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe?quicklink=index&overridelayout=true
Check the above link section 3.2
HTH
Rajesh

Unable to convert the sender service insertgoods to an ALE logical system

Hi ,
I am trying to send an IDOC to sap system through XI BPM . But I am getting error as "Unable to convert the sender service insertgoods to an ALE logical system"
To rectify this error, I selected the integration process in integration directory and in (services---adapter specific properties I gave the logical system name as "LS" . Now i do not get any error in XI but idoc failed in SAP with error as "Partner profile not available "
Please advice .
Thanks & Regards,
Suvarna

Hi Suvarna
I have done this type scenarios using A2A and BPM also. I got success.
Here what i mean to say , forget about your integration process for a while.
For example you are sending a vendor file from System1 to a SAP System (IDOC). Here that file send by sender should be converted into IDOC.
So during the configuration of SLD for Sender system ,we should give logical system (any name) for Business System.
That logical system should be created in SAP system in (SALE tcode).Then you can't get that <b>"Unable to convert the sender service"</b>error.
For integration process no need to assign any logical system , leave it blank.
If you have any doubt you please call me on my mobile or give me your mail id I will forward the document which i have done.
thanks
Prasad 9960226467

File-idoc Unable to convert the sender service to an ALE logical syste

Hi experts
iam working on file-idoc scenario ,iam getting the below error in sxmb_moni and RWB
"Unable to convert the sender service to an ALE logical system"
i checked the partnetr profile, RFC(sm59) and IDX1 t codes.
the connection is ok. but still i could figureout the problem.
please suggest me
Thanks
vasavi

Hi,
Have u checked the logical system is added in the Sender Business service in the Integration Directory?
Open the Buiness Service/System --> EDIT-ADAPTER SPECIFIC IDENTIFIERS
then specify the logical system name.
Go throgh the following link
Troubleshooting File-to-IDOC Scenario in XI.
Regards
Sridhar Goli

ALE Logical System Error

Hi Experts
In a simple File to Idoc scenario i used a BPM and did the mapping outside the BPM. The BPM just receives the message of type IDOC and sends it to the R/3 system. In Message monitoring the transformation of message from file server to BPM has been sucessfull but the tranformation of message from BPM to R/3 reported the following error.
"Unable to convert the sender service FileIdoc_BPM to an ALE logical system"
Suggest me the solution for this problem
Regards
Saravanan

Hi,
Go to the Sender Business System / Service , Dobule Click on it, In the menu at the top Business <b>Service --> Adapter Specific Identifiers</b> --> Add Some value to the logical system name , save and activate the Business System / Service and then trigger the interface.
Cheers,
Jag

Unable to convert the sender service CSBK_Invoice02 to an ALE logical syste

Hi Experts,
I have Idoc -> BPM -> Third party system scenario.
In which while getting acknowledgement i m getting the following error.
"Unable to convert the sender service CSBK_Invoice02 to an ALE logical system"
here CSBK_Invoice02 is my BPM.
I have checked the Adepter specific config into the ID.
For R/3 it is correct, and for Third party system it is blank.
As here BPM is giving error. But i am not able to give any Logical system there.
Any idea y this error is coming?
Its really very urgent, as my development is going into production tomorrow.
Please help me out in this ASAP.
Thanks in advance.
Regards,
Hetal

Hi Hetal,
Did you check the response from Mickael from thread..
1/ In your Business Process of your ID (configurator), go to menu "Service > Adapter-specific identifier" and in the part "IDoc Adapter", write your Logical System.
2/ Create this Logical System on your target system (R/3).
WARNING: XI allows you to used a Logical System for only one service (Business Process). Thus, if you are several interfaces, you must used different Logical Systems.
Hope this will help.
Nilesh

File2idoc receiver service cannot be converted into ale/logical system

hi
i m working with file to idoc the file adapter is working fine bit\ut wen i checked in
sx_monitor i found the red flag and it shows the error
receiver service cannot be converted in to ale/logicalsystem

Go to the Business System / Service you have maintained for your File.
Double Click ,Business System --> Adapetr Specific Identifiers.
Here, maintain the Logical System name of the Sender System. This logical system name should be the value for which the partner profile
has been created in your SAP system in we20.
The same should also be maintained for your Receievr Business System.
Regards
Bhavesh

SYSTEM ERROR, IDOC_ADAPTER, Unable to convert ALE to logical system

Similar Messages

Maybe you are looking for