System error in fund managment update (LFMPRF04) Get_date error no. FI057

Hi,
We are running offcycle activies of payroll for near about 1530 employees (vendors) at the time of posting we are getting above mentioned error.
But If i post it partially system doesn't give any messages.
pls. help me in this regard.
regards,
mahesh

hi,
I am also facing the same problem while doing MIRO (no. of line item is 181) for multiple service sheet. I am using ECC 6 and EHP 5 so this note is absolute for me. what should i do now.
Regards

Similar Messages

System error in Funds Management update

Dear you,
Have anyone seen the following when updating FM from FI document:
"System error:Funds management update (FMRI, CHECK_WE_RE)"
Any ideas what to do?
Thanks
Sonja

Hi there,
The update problem occurs both if we try to post with FB50L or if I try to make a transfer of FI postings in FM. This all happens in the new installation where we plan to use new GL and FM.
This note you gave did not ring a bell for me
The error message is FI057. But we have not yet found a suitable note.
Therefore any ideas are still welcomed.

Error- funds managment update

when i go to va02 and want to short close the order line item, i am getting the following error.
System error: Funds management update (DOUBLE KEY,FM_OPEN_ITEM_POST)
kindly let me know how to solve this error please.
regards
sathya

Your getting 2 Keys for FM FM_OPEN_ITEM_POST.
Check following link for understanding
No commitment item entered in item
Re: Error with Commitment Update
Thanks & Regards
JP

After Funds Management activation we got error in travel managment

Hi All,
After activating funds management in the system, while creating a travel request we got the following error. Anyone can help on this, for idenifying the problem.
In the travel request portal we are getting this error :
" com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: No expense type for estimated costs has been defined. Cannot save , error key: RFC_ERROR_SYSTEM_FAILURE and No expense type for estimated costs has been defined. Cannot save , error key: RFC_ERROR_SYSTEM_FAILURE "
regards,
Sabari Prabhu.

Hi
I have a question, I udnerstand in (Create one expense type "Estimated Costs") but my question is in using transaction
When you start using the trip transaction and select a travel request the system send you to the TP04 transaction... now
with this new function, I have to use the transaction PR05 its right? becouse the TP04 ask the VORS expense type, and sap says to dont delete record
Please could you tell me with wich transaction you start to create a travel request? I have the same problem of the screen but Im not sure to use the TP04 transaction wit this solution
Thanks a lot

Idoc Funds Management Update

Hi,
We are using IS-U and updating separate ECC instance through IDOC FIDCCP01. The FM (Funds Management) assignment i.e. Fund, Fund Center and Commitment Item are being correctly updated, however, there is no budget check. The report FMAVCR01 also does not reflect the IDoc posting.
There is no Funds Management or Controlling document, only FI document is being created.
We need to activate budget availability check on IDoc posting.
Please advice.
Thanks and regards,
Achal

Hello,
Can you please review your settings according to the attachment? (zip file). this error sometimes happens if settings for document splitting and payments without reference are not ok.
Please let us know if it helps
regards
Mar
If you can't open the file, please try this link:
[https://websmp107.sap-ag.de/~sapidb/011000358700007290972005E]
sorry for the trouble with the attachment
regards
Mar
Edited by: Mar Novalbos on Jul 23, 2009 4:50 PM
Edited by: Mar Novalbos on Jul 23, 2009 4:55 PM

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

Battery Error after Power Manager Update

ThinkPad T520, Win7 Pro 64.
TVSU updates Power Manager to V. 6.38. Immediately on reboot notification area shows 0% power and a message stating that a battery error has occurred. The battery LED is now blinking orange and the battery will not charge. Considering that the battery was fully charged and had only 31 cycles on it (although it dates to October 2011) I can only assume that the software has killed the battery. Again, prior to the update there were no indications that the battery was malfunctioning or even losing capacity.
Uninstalling Power Manaager did not help. Re-installing Power Manager did not help.
Is there a way to reset the battery? Am I locked in to buying a Lenovo battery to avoid task bar notifications of a non-genuine battery? Any other ideas would be greatly appreciated. Here in Mexico these batteries are very, very expensive.
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask

Hey there mixz1,
Do you find you are encountering issues similar to this thread? Additionally, if you will please private message me the
following information:
Name
Email Address
Contact numbers
Address
Serial Number of the device.
I'd like to coordinate with a colleague to see what the next best action should be for your situation.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Funds Management Update profile 350 : commitment and Payment budgets

HI Gurus,
We have configured with update Profile 350 ;commitment and Payment budgets ( Former Budgeting).
For Procurement : Purchase Requisition and Puchase Order Level
For Cosumption : Goods Issue and FI direct Invoice (i.e: Exp Dr and Vendor Cr).
is that profile meets the requirement ?
Please clear me the Budget transactions updated.
1. Purchase Requistion
2. Purchase Order
3. GR
4. GI
5. Stock Transfer
6. Invoice
7. FI invoice
Regards,

Hi, Laxmu,
All these can be managed by UP "000101" also. Why are u going for 351..?? Any specific reason??
Rgds,
Khushru

User Exit for the Funds Management Update

Hi Experts ,
My requirment is to make the movement type 261 as stastical . This should be reflected in COO11 T Code, Please suggest me the User Exit Or The BADI.
Thanks in Advance,
Regards,
Manish

Self Solved.

Help needed: PS CC2014 Update failed, then after uninstalling reinstall failed. Initial error code U44M1I210 (when update failed), now error -55 (reinstall fail)

I tried to update Photoshop CC 2014, but it failed at 75%, with error code U44M1I210. After restarting my system, it still failed so I uninstalled the app, per this article: https://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
Now the reinstall won't complete, and I'm getting error -55. The one other article that seemed relevant looks like the person had to uninstall and reinstall all his Adobe software after creating a new admin account on his computer (When I try to update I get an U44M1I210 error message, "Unable to extract the downloaded files" - help please, applies to latest Indesign, Illustrator and Photoshop CC), and I'm hoping there is a better solution than the hours that will involve.
Running on OSX 10.7.5.
Any help greatly appreciated.
Thanks!

GundamCat what specific errors were you able to discover in the installation log for the update?

Error could not be updated an unknown error occurred (6) trying to update to ios 8.1.3

I'm having a problem while i started updating my wife's iphone to ios 8.1.3 from ios 7.1.1 by itunes it had showned up that error and i dont know what to do. On iphone screen the progress bar has stoped. Please help me what to do

error 1602 http://support.apple.com/kb/TS3694#error1602

I use a pc. i keep getting a server error messge trying to upload photos to my iPad and iPhone via iCloud. the error states can't update photostream, server error.

uploading worked in the beginning, but in the last few days it has not. how should i proceed.

Go into Settings, iCloud on your iPad & iPhone. Turn streaming on there. I did that when I first set up my phone & iPad & have not had any problems. It will only stream over new photos so take one on your phone & see what happens. I hope that works for you.

Extension Manager Update - error code U43MID207

Hello. I have recently ported my photoshop cs5 Extended X64 (Version 12) from my 64 bit Windows 7 machine to a 64 bit Windows 8,1 machine.
Everything works ok and I have updated all the component programmes except Adobe Extension Manager,
When I try to install the extension manager update I get error code U43MID207.
Can anyone help please?
Keith

update manually, http://www.adobe.com/downloads/updates/

|Funds Management - relating to PR/PO

I am getting another error in Funds Management:
Posting date must be used for update of value type 000100 update profile 50
Message no. FI_E008
Diagnosis
FM areas with assignment to the update profile must have all their value types defined as 'posting date' on the ledger level when activating to period-based encumbrance tracking (PBET) on the ledger level.
Procedure
Find all the FM areas using the update profile in transaction 'OF37'.
Use transaction OF36 to ensure that all value types in the FM area(s) are using 'posting date' for the ledger that is being activated to PBET.

Hi,
It's what the system says. You have to ensure, that you don't overwrite profile 0100 in OF36 with other date, than posting date.
Regards,
Eli

Desktop Manager generates 0x00000043 fatal error

I was directed to upgrade the latest version of Desktop manager (5.1.0.28).
When loading the Desktop manager and updating my programs the process of updating works smoothly if I only select the application I want to update (example GOTag).
When I select to update to the latest System software (4.6.1.313) and Core Applications then during the process of updating when Desktop Manager displays that it is "load jvm and system software".
Device Manager then generates and "Error" message:
"A fatal error has occurred while updating your device's software. Please try again.
this system software is not designed for the connected device[A:0x00000043]"
The device is a Sprint/nextel 8350i.
Can I get around this error or should I just not update the BB System Software?
Any help is appreciated.

I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

System error in fund managment update (LFMPRF04) Get_date error no. FI057

Similar Messages

Maybe you are looking for