System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is  In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression 
I should resent this message content. When i press Resend tab  in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

Similar Messages

  • System Error in Message Monitoring while it shows checked flag in SXMB_MONI

    Hia,
    We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
    (ECC -> PI -> Legacy CRM)
    I have following queries:
    1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
    2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
    Regards

    System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
    2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
    2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
    2010-05-10 13:15:05     Information     SOAP: completed the processing
    2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
    2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
    2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
    2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
    2010-05-10 13:15:06     Error     The message status was set to FAIL.
    I have already checked Data Structure and it is fine.
    Regards
    In this scenarios we are using XSLT mapping using CDATA.
    Please suggest solution.

  • System Error in Message Monitoring -Proxy to SOAP async scenario

    Hi All,
    My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
    In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
    but in related Soap Receiver communication channel i can see the below Error 
    "2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
    2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
    2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
    2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
    2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
    Please help , what could be the problem.
    Thanks in Advance.
    Jyoti

    Hi Jyoti,
    >Is there any specific setup required at Provide side while moving to Acceptance system
    I dont think so.
    Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
    Regards,
    Udo

  • Error in message monitoring while creating new record in R/3

    Hi All,
    I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
    Service name: Validation_Service
    Message: BackendKeys are not filled in table HEADER returned by getDetails
    I am passing some random number from Client to SAP R/3 create function module.
    When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
    Corresponding to newly created record, i can see the data in getdetail header also.
    Not sure why this error is coming.
    Appreciate your help!!
    Thanks & Regards
    Devendra

    The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
    i.e. the CREATE signature is usually something like:
    CREATE_BLAH
      IMPORTING header TYPE header_row
      EXPORTING key type header_row-key_field.
    So the 'key' here should be filled by the FM and returned to DOE.

  • Wrong port in FTP receiver adapter - no errors in message monitoring?

    Hello all
    We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
    After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
    We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
    For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
    In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
    After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
    Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
    I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
    Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
    Thanks for some suggestions.
    Best regards,
    Renaud

    Hi Michal
    Thanks... works great for normal XML based messages!
    Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
    The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
    I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
    BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
    Thanks a lot for your support and patience!
    Kind regards,
    Renaud

  • "Error in message monitoring in runtime workbench"

    Hello All,
        I have an error in message monitoring in runtime workbench.
    We have installed PI7.0 and it should run on port 50000.But it is running on port 50100.
    Please suggest what are the steps involved to resolve this problem.
    Thanks and Regards
    SAN
    null
    k san

    San,
    Can you please copy / paste error message.
    Also check if you have set correct port in Exchange profile under Runtimeworkbench.
    Nilesh

  • System Error During Message Mapping

    I've set up a simple mapping scenario that sends a DEBMAS06 IDoc from our R/3 system to XI mapping to DEBMAS06 and writing out to a file.  I am getting the following system error during message mapping:
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
      <SAP:P1>Server repository could not create function template for 'SMPP_CALL_JAVA_RUNTIME</SAP:P1>
    I have gone back to the Design Builder and tested out the message mapping and the interface mapping and both work successfully.  I have also taken the payload of the message and submitted it via the RWB and it generates the same error as when sent from R/3.  Any other places I can look?

    Hi Mike,
    You have got the connectivity issue problem between ABAP and J2EE stack. When do the test in the Message Mapping, thats the J2EE and it works. But during the runtime it has to go to the Integratin Server, which is the ABAP stack. Fix the connectivity issue, check the smicm,trace and debug log etc.
    Hope this helps.
    Cheers,
    Ranjan

  • Error in Message Monitoring

    Hello,
    When I enter to "Runtime Workbench" -> Message Monitoring, I choose:
    is.<instance_number>.<server_name> and press "display" button, then I get an error:
      "Unknown error: javax.ejb.CreateException: getJCOCLient
      (String,String)"
    When I choose af.<sid>.<server_name> in the combo box, the problem doesn't exists.
    Please Advice,
    Dimitry Haritonov

    Hello,
    Finally I solved the problem. Somehow adding parameter:
    -Duser.language=en
    solved the problem.
    instruction (note 768457):
    ==========================
    "...Enter config tool,drill down to Instance_[ID] -> server_[ID] and add the parameter on the right side in the section 'Java parameters'"
    After adding parameter, I stopped and started XI. Then the problem disappeared.
    Good luck,
    Dimitry

  • Error  in Message Monitoring in XI.

    Hi All
    Affter clicking  Message Monitoring  in RWB there is DETAIL button above the message listed when i am trying to click on the detail button it shows the error like "The page cannot be displayed".
    pls help me .
    Thaking you in advance.

    Hi Hiren,
         Plz check below mentioned blog. It will help you out:
    <a href="/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi:///people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Regards,
    Subhasha

  • Error "Video System Error: Unknown message: bindSuccss" when trying to play a movie in LR 5.3

    Hi,
    I'm getting the error listed in the title of this thread when I try to play a video.  any ideas?
    Dan

    I have to say Im a little confused to. Following the steps outlined:
    Desaturate in LR.
    Export as a JPG (add to this catalog selected- for reimport)
    Select image. Switch to Print Module
    Print file.
    No problems as expected. I dont see that there is any seting to adjust that will clear this issue.
    Q. Is it consistent with every BW file or just some?
    Aside from changing your workflow so as not to produce jpgs at all in favor of a Lightroom gallery for showing your clients the images, based on the info I have I cannot replicate the problem. So I will try first an optimization of the catalog.
    Prefernces > General > Go to Catalog Settings > General > Relaunch and Optimize.

  • Urgent - Messages in RWB in "System Error" status - Resending

    All,
    I am trying to resend the messages in Message Monitoring of RWB which are in "System Error".
    Message selected and Clicked on resend and it would not ask my password.
    We are on SP19 of XI 3.0. Is it something new with the SP19?
    I am pretty much sure that it used to ask for password earlier. And we dont have SSO (single sign on) enabled.
    reg,

    Naveen,
    Have you seen this weblog:
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    Also if you give the password once you dont need to give again. So that might be the reason why it is not asking you. Close all your browsers and open once again and give a try.
    ---Satish

  • ALE Logical System Error

    Hi Experts
    In a simple File to Idoc scenario i used a BPM and did the mapping outside the BPM. The BPM just receives the message of type IDOC and sends it to the R/3 system. In Message monitoring the transformation of message from file server to BPM has been sucessfull but the tranformation of message from BPM to R/3 reported the following error.
    "Unable to convert the sender service FileIdoc_BPM to an ALE logical system"
    Suggest me the solution for this problem
    Regards
    Saravanan

    Hi,
    Go to the Sender Business System / Service , Dobule Click on it, In the menu at the top Business <b>Service --> Adapter Specific Identifiers</b> --> Add Some value to the logical system name , save and activate the Business System / Service and then trigger the interface.
    Cheers,
    Jag

  • Hepl !!! "File system error" on the Muvo TX FM 128

    every time, I turn on my MP3 player, display "file system error" on the monitor and then it turn off. I was download firmware latest (ver. .9.0) to reinstall flow introduction. But it'sdidn't complete, and display error on the board: "please put device in recovery mode before running firmware update", althought I was connect mp3 player to PC. I was also format mp3 player several time before, but have no changed !Please tell me how the way to solve this problem!?

    Recovery Mode is needed as per the message.
    Download and install drivers.<
    Press and hold Play button while connecting to PC.<
    Keep holding Play until New Hardware Wizard starts.<
    Complete driver installation.<
    The run firmware upgrade.<
    During upgrade select Format Data Area check box.<
    PB

  • System ERROR EVENT WARNING : ORACLE.APPS.AR.HZ.CUSTACCOUNT.CREATE

    Hi,
    When Customer is Created / Updated using Receivables or TCA APIs in Oracle Apps 11.5.10, all registered Business Events are firing and subscription code (PL/SQL Rule Function) is executing successfully.
    In Administrator Workflow window, Notifications tab showing System Error: Warning Message for all the events which are subscribed.
    eg:
    "System: Error Event WARNING : oracle.apps.ar.hz.CustAccount.create /
    oracle.apps.ar.hz.CustAccount.create62829 " Warning Message.
    Please advice.
    Thanks and Regards,
    Vijay

    Whenever there is a requirement of raising a Business Event due to some custom activity, you should call wf_event.raise to do this.
    Just google to see the parameters you need to pass it while calling it.

  • Unable to create a Wiki - System Error!

    Hi,
    I have been trying to add a couple of child pages to some parent (main) pages.
    I can enter the page name and enter the text (say).
    When I click on save it gives me an 'system error!' message.
    What could be the cause? Is there anyone who also is getting that error or it is just confined to me?
    Best regards,
    Harsh Dave

    Thanks Hilit for your efforts!
    Hilit wrote: 1. I've checked the permissions of the "The new Enhancement Framework and the new kernel-based BAdI" Wiki, you are supposed to able to edit it. This, in addition to the fact that you had managed to edit it before, leads me to think that maybe it was a temporary bug. Did you try to re-edit it after a couple of hours/days?
    1. I tried to re-create wiki couple of times after the first time I encountered that situation. Since a week, I am trying daily but the situation remained same as before.
    I hope that should be a temporary 'bug'.
    Hilit wrote: 2. Regarding the other Wikis- can you recall whether the "The new Enhancement Framework..." and the "BTE - Business Transaction Event" were child pages of "Enhancements and Modifications...." also before you had this error? (i.e. when you managed to add the child pages in earlier times) ? In other words, is it a part of your error or was this said regardless?
    Also, please note that the child page of "Enhancements and Modifications...." is actually a COPY of "The new Enhancement Framework...".
    2. The wikis in the second point. I did not see that before as I attempted to add child pages recently and not anytime earlier. So, I am unaware of the situation that time .
    This is the first time I am adding as child pages under "Enhancements and Modifications..." and "BTE - Business Transaction Event"
    If you need more clarifications please give feedback!
    Hilit wrote: since we're heading on our Passover Break
    Have a nice break!
    Any updates or possibilities?
    Best regards,
    Harsh Dave
    Edited by: Harsh Dave on Apr 13, 2009 4:01 PM

Maybe you are looking for

  • Prepayment request and final invoice

    Can anyone help with a question about posting payments to a prepayment request and then reconciling the final invoice. We create a sales order and then a prepayment request for 100% of the sales order. The customer then pays for the goods. We put in

  • 24inch iMac scren appears to be transparent

    I'm using a 24in iMac purchased in August 2008, and using it for photo editing...my monitor appears to be transparent..when i'm in on application, I can almost see an underlying layer of whatever other application is open, or in some cases even silho

  • Organizing Music / Play Lists / Folders

    I have tried looking for the answer to my question in the iTunes forum search engine without much luck what so ever. But I am trying to organize my music and music video library in classifications putting together each form of music or music video in

  • Best way to handle user scaling/offsetting of channels?

    I have a "Channel Configuration" page in my program that I setup. The user can turn channels on or off for data acquisition. The user saves the channels (global variable), and then goes back to a Main Menu. Right now, if they want to add a channel or

  • Is it possible to have a responsive slideshow?

    Hi The site that I am building  (www.fawleyfalcons.com) has a slideshow at the top of the page which I would like to take up the entire screen. Everytime I stretch it to fit it has scroll bars. Is there any way of getting around this by having a resp