System error in program CL_RSR and form GET_PROVID-02-(see long text)

Hi,
If i execute a cube contents,i am getting  this message "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error data has not appeared,only structure appeared in the cube.
When we execute a query in the BEX,I got the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
Please let us know what can be the problem and the solution.
Thanks in advance and best regards.
kumar

Hello,
Open the query in query designer and perform query check. The query might have erroraneous elements.
Regards,
Shashank

Similar Messages

  • System error in program CL_RSR and form GET_PROVID-02- (see long test)

    Hi,
    If i execute a cube contents,i have getting this message  "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error no data has appeared only structure appeared
    If I execute a query in BEX, the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
    Please let us know what can be the problem and the solution.
    Thanks in advance and best regards.
    kumar

    can you post the message in st22 and sm21 for the error?

  • System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

    Hello all,
    One of the users is trying to run a report in Production using BEx analyser and gets the following error.
    BI Server error:
    Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
    I have already run the SAP Note 1237190 but there is no use as the error comes up again.
    Could any one please help to resolve this issue.
    Thanks
    Phani.

    Hi Dipika
    Thanks for the reply.
    But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
    This is not happening with all the users though.
    Its a random problem only.
    Thanks
    Phani.

  • System error in program CL_RSR and form GET_PROVID-02-

    Hello.
    I have these error messages when I try to display data from an ODS in my BI 70 system:
    I>> Row: 73 Inc: LRRMSU13 Prog: SAPLRRMS                                 
    ASystem error in program CL_RSR and form GET_PROVID-02- (see long text)
    Can do anybody help me?
    Thank you,
    Javier

    Greetings Javier and others-
    What Service Pack are you all on?
    I believe that anything below  BI 7-SP10 will require manual application of  the following OSS Note:
    <b>
    973350 - $ symbol on behalf of an InfoProvider</b>
    hope this helps.
    -Stefan

  • "abort system error in program CL RSR and form GET_PROVID-02-(see long text

    Hi All,
    When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
    "abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
    System error in program CL_RSR and form GET_PROVID-02- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    Can anyone help me?
    kumar.

    Hi , could you please check note 1166294 and check if the issue will be fixed ?
    1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
    Thanks,
    Walter Oliveira.

  • System error in program CL_RSR and form GET_CHANMID-02-

    System error in program CL_RSR and form GET_CHANMID-02- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I got this error in SCM IDES 7.0,  Planning Area Initialization and Display MPOS...Please help me...

    Hi,
    One of our planning sequence is failing in production with similar error. Could you please let us know what is the fix for the issue you faced.
    System error in program CL_RSR and form GET_CHANM-01
    Please advice as this is very critical.
    Thanks,
    Tintu

  • BRAIN299 System error in program CL_RSR and form _CHACONST_SID-02

    I am getting the following error when trying to update and activate my multi providers.
    BRAIN299 System error in program CL_RSR and form CHACONSTSID-02
    Info cubes syntax check is fine.

    Hi,
    try to implement this SAP note:
    InfoObjects: Unintentional characteristic constant
    SAP Note Number: [1080800|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303830383030%7d] 
    Symptom
    In the maintenance transaction for InfoObjects, the system displays no value in the 'Constant' field. However, you use the InfoObject, for example in a query, and the system behaves as if a value were set. This may cause unexpected behavior or errors.
    Other terms
    InfoObjects, characteristic, characteristic constant, CHACONST, CL_RSR _CHACONST-SID-02-, EXCRT
    Regards
    Andreas

  • DTP error:  "System error in program CL_RSR and form GET_COB_PRO-01-"

    Hi Gurs,
    When I am lasting data in Production, from DSO to a Cube with DTP I get error
    In Extract from DataStore u201CSystem error in program CL_RSR and form GET_COB_PRO-01-u201C.
    The DSO is loaded from 0FI_GL_10.  I do not get this problem in Development
    We have BW 7.3 SP05
    Any ideas?
    Regards, Reynir

    Hi,
    Check the below note :
    Note 1550723 - System error in program CL_RSR and form GET_COB_PRO-01-
    Also check in SM21/ST22 for any message number along with the error.
    Regards,
    Sunil

  • System error in program cl_rsr and form _chaconst_sid-02-

    Hi,
    last week we upgraded our BW from 3.1 to 7.0 (SP15). Since them we have problems with a query.
    If I execute a querydefinition in BEX, the message "system error in program cl_rsr and form chaconstsid-02-" pops up.
    Please let us know what can be the problem and the solution.
    Thanks in advance and best regards.
    Detlef

    Hi,
    try to implement this SAP note:
    InfoObjects: Unintentional characteristic constant
    SAP Note Number: [1080800|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303830383030%7d] 
    Symptom
    In the maintenance transaction for InfoObjects, the system displays no value in the 'Constant' field. However, you use the InfoObject, for example in a query, and the system behaves as if a value were set. This may cause unexpected behavior or errors.
    Other terms
    InfoObjects, characteristic, characteristic constant, CHACONST, CL_RSR _CHACONST-SID-02-, EXCRT
    Regards
    Andreas

  • System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

    Hi All,
    I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
    The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
    <i>The initial exception that caused the request to fail, was:
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
    When I execute Querys that are on Infoproviders, everything is ok.
    Any Idea??
    Thnks a lot!!!
    Yolanda.

    Hi,
    Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
    1. Agg level is active
    2. Check the query (option is available on query designer)
    thanks

  • System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02

    Hello experts,
    I get the following error when I execute the input ready query which was created on the aggregation level in BI IP.
    The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490.
    Thanks
    Terminate: System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02- (see long text) [A299(BRAIN)]
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

    You may wish to check this
    Note 1048923 - BRAIN X299 in SAPLRRI2; form INPUTABLE_CHAFREE-02-
    Hopeit Helps
    Chetan
    @CP..

  • System error in program SAPLRRI2 and form BEST_WGR_02-01-

    Hi Friends,
    When I am trying to execute a query i get the error message below.
    System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
    Error when generating dataProvider
    The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
    I am using SAP BI Patch level 3.
    Internet explorer 7
    Gui 6.4
    At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
    Any Solution For This.
    Many Thanks,
    Anand

    Hi
    IE 7 is not so compitable with BEx. It always has the Popups problem..
    See the Note :919196 and  Note 1159538 - Issues in Internet Explorer   Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
    Hope it helps

  • Executing query error: System error in program SAPLRRI2 and form REP_A

    Hello Experts,
    I am facing problem while executing query.
    I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
    When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
    " >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
    System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
    Error when generating dataProvider "
    This query is using some standard structures, which are running successfully in other queries in QA.
    what would be an issue?
    Regards,
    Nirav Shah

    Hi,
      Try to regenerate the query in RSRT t.code.
       ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
    After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
    OSS notes : 1. 1121766
                       2. 1117966
                       3. 1225856
    Regards,
    Siva.

  • System error in program CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-

    Hi,
    I am getting following error while running BI -Query
    "System error in program CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-01- (see long text)"
    I generated query in RSRT yesterday and it fixed the problem. But , today morning again i am seeing the same error.
    Thanks in advance,

    you may wish to check this note
    Note 1049671 - CL_RSR_RRK0_PARTITION and IF_RSR_RRK0_PARTITION~BROWSE-01-
    use tcode - SNOTE to download this note for implementation and if do not work can revert it back to original.
    Hope it Helps
    Chetan
    @CP..

  • System error in program CL_RSR_RRK0_CURR and form GET_SX_CURR-01

    When i execute a report after entering the selection criteria, I get the following error:
    System error in program CL_RSR_RRK0_CURR and form GET_SX_CURR-01- (see long text)
    Recently we upgraded to BW EHP1, release 7.01.
    Any help would be grealty appreciated.

    Error while executing report : Error in program CL_RSR_RRK0_CURR
    OSS Note 1030657

Maybe you are looking for

  • How to get around # sign

    I have to use '#DCDEE0' for a color background, but sometime CF interprets it as a variable and blow up because there is not ending # sign. What is the trick to get around this? Some screens work and some dont.

  • Functional Area derivation as obligatory checkbox in Cost Center distribution cycle?

    Dear All, We are using Cost of Sales accounting with FI-CO online integration. Derivation of Functional Area for Cost Center assessment cycles is an obligatory indicator. Nevertheless I may create Cos Center distribution cycles without this option (w

  • Printing varying pictures onto a single sheet

    I have got the hang of printing a single picture onto a sheet. Is it possible in Elements to simultaneously print varying sized prints onto a single A4 sheet to enable minimum waste of photo paper? Your feedback will be appreciated. Hummingbirdman

  • Coldfusion odbc errors

    trying to connect to ibm u2 database. any ideas? coldfusion 7 with iis on xp sp2 Connection verification failed for data source: u2 java.sql.SQLException: [Macromedia][SequeLink JDBC Driver][ODBC Socket][IBM][UVODBC][2701920]Error ID: 46 Severity: ER

  • Bumper actually making signal worse?

    I am one of those folks who has not had issues with the so called "Death Grip"...I use bluetooth a lot and hold my phone as though it is a fine instrument rather than a club or hammer. Still, when Apple offered the free bumpers and cases, I signed up