System Error in program CL_RSR executing queries

Hi,
We have several queries created from multiprovider X and these queries are included in a workbook. Multiprovider is active and fine (I have used the programs RSCOMPCONS and RSR_MULTIPROV_CHECK return status OK).
When I open the workbook the followings error messages are showed (before selection screen):
- System error in class SAPMSSSY1 method: UNCAUGHT_EXCEPTION
- System error in program CL_RSR and FORM GET_INITIAL_CHAVL_OFF-02-
We are looking sap notes (we are in the new version 7.30, Support package 5) in order to solve this error but We don't find the solution.
Please, could you help me?
Thanks!

Might require to collect the workbooks, queries along with the MP & perform a transport. Please collect the roles also. This must solve.

Similar Messages

System error in program CL_RSR and form GET_CHANMID-02-

System error in program CL_RSR and form GET_CHANMID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I got this error in SCM IDES 7.0, Planning Area Initialization and Display MPOS...Please help me...

Hi,
One of our planning sequence is failing in production with similar error. Could you please let us know what is the fix for the issue you faced.
System error in program CL_RSR and form GET_CHANM-01
Please advice as this is very critical.
Thanks,
Tintu

System error in program cl_rsr and form _chaconst_sid-02-

Hi,
last week we upgraded our BW from 3.1 to 7.0 (SP15). Since them we have problems with a query.
If I execute a querydefinition in BEX, the message "system error in program cl_rsr and form chaconstsid-02-" pops up.
Please let us know what can be the problem and the solution.
Thanks in advance and best regards.
Detlef

Hi,
try to implement this SAP note:
InfoObjects: Unintentional characteristic constant
SAP Note Number: [1080800|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303830383030%7d]
Symptom
In the maintenance transaction for InfoObjects, the system displays no value in the 'Constant' field. However, you use the InfoObject, for example in a query, and the system behaves as if a value were set. This may cause unexpected behavior or errors.
Other terms
InfoObjects, characteristic, characteristic constant, CHACONST, CL_RSR _CHACONST-SID-02-, EXCRT
Regards
Andreas

System error in program CL_RSR and form GET_PROVID-02-(see long text)

Hi,
If i execute a cube contents,i am getting this message "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error data has not appeared,only structure appeared in the cube.
When we execute a query in the BEX,I got the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
Please let us know what can be the problem and the solution.
Thanks in advance and best regards.
kumar

Hello,
Open the query in query designer and perform query check. The query might have erroraneous elements.
Regards,
Shashank

System error in program CL_RSR and form GET_PROVID-02- (see long test)

Hi,
If i execute a cube contents,i have getting this message "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error no data has appeared only structure appeared
If I execute a query in BEX, the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
Please let us know what can be the problem and the solution.
Thanks in advance and best regards.
kumar

can you post the message in st22 and sm21 for the error?

BRAIN299 System error in program CL_RSR and form _CHACONST_SID-02

I am getting the following error when trying to update and activate my multi providers.
BRAIN299 System error in program CL_RSR and form CHACONSTSID-02
Info cubes syntax check is fine.

Hi,
try to implement this SAP note:
InfoObjects: Unintentional characteristic constant
SAP Note Number: [1080800|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303830383030%7d]
Symptom
In the maintenance transaction for InfoObjects, the system displays no value in the 'Constant' field. However, you use the InfoObject, for example in a query, and the system behaves as if a value were set. This may cause unexpected behavior or errors.
Other terms
InfoObjects, characteristic, characteristic constant, CHACONST, CL_RSR _CHACONST-SID-02-, EXCRT
Regards
Andreas

DTP error: "System error in program CL_RSR and form GET_COB_PRO-01-"

Hi Gurs,
When I am lasting data in Production, from DSO to a Cube with DTP I get error
In Extract from DataStore u201CSystem error in program CL_RSR and form GET_COB_PRO-01-u201C.
The DSO is loaded from 0FI_GL_10. I do not get this problem in Development
We have BW 7.3 SP05
Any ideas?
Regards, Reynir

Hi,
Check the below note :
Note 1550723 - System error in program CL_RSR and form GET_COB_PRO-01-
Also check in SM21/ST22 for any message number along with the error.
Regards,
Sunil

System error in program CL_RSR and form GET_PROVID-02-

Hello.
I have these error messages when I try to display data from an ODS in my BI 70 system:
I>> Row: 73 Inc: LRRMSU13 Prog: SAPLRRMS
ASystem error in program CL_RSR and form GET_PROVID-02- (see long text)
Can do anybody help me?
Thank you,
Javier

Greetings Javier and others-
What Service Pack are you all on?
I believe that anything below BI 7-SP10 will require manual application of the following OSS Note:
<b>
973350 - $ symbol on behalf of an InfoProvider</b>
hope this helps.
-Stefan

"abort system error in program CL RSR and form GET_PROVID-02-(see long text

Hi All,
When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
"abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
System error in program CL_RSR and form GET_PROVID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Can anyone help me?
kumar.

Hi , could you please check note 1166294 and check if the issue will be fixed ?
1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
Thanks,
Walter Oliveira.

Executing query error: System error in program SAPLRRI2 and form REP_A

Hello Experts,
I am facing problem while executing query.
I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
" >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
Error when generating dataProvider "
This query is using some standard structures, which are running successfully in other queries in QA.
what would be an issue?
Regards,
Nirav Shah

Hi,
Try to regenerate the query in RSRT t.code.
   ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
OSS notes : 1. 1121766
                   2. 1117966
                   3. 1225856
Regards,
Siva.

System error in program CL_RSMD_RS_SPECIAL

I have a query built on a Infoset, and the problem comes with 0FISCPER variable, when we try to do a input help (F4) in Bex. this happens only when I use fiscper on queries bulit on INFOSETS, and it works perfectly alright with all other cubes. We are on SP13. So do anyone know how to fix this issue, or a single OSS that can fix this issue.
System error in program CL_RSMD_RS_SPECIAL and form
IF_RSMD_RS~READ_META_DATA-02 (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program
state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template,
or during interaction in the planning modeler, and if you can reproduce
this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for
the trace tool environment as well as SAP Note 899572.
and in portal, it gets to the point of variable screen and then throws a error msg.
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION

I was a lil late on this time
However;i found a note below which exactly matches your infoset issue and 0fiscper,but i believe that SP-14 did the trick.
any ways good luck
Note 1058906 - GET_DIME_VALUES-02 in CL_RSMD_RS_SPECIAL
Hope it Helps
Chetan
@CP..

System error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01 Message

Hi Gurus,
I am getting error 'system error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01' while checking and executing a query.
The scenario is :
- The query is using Replacement path formula variables and when I do remove these the error disappears.
- I recreated the same formula variable but the error message reappears.
- We are separating systems (moving on to new system) and the query runs absolutely fine in the old system.
- The same variable is been used in some other queries as well but they run absolutely fine without any error.
Any suggestions what is going wrong ? Should I raise an OSS to SAP, thats going to be the final GO !!
I have tried almost doing all things but the error remains the same. This is quiet urgent and Reply will be much appreciated.
Best Regards
Ritesh

Hi,
Thanks for the reply. OSS note 982328 becomes irrelevant in my case as we are on SAP BW 7.3 and SP SAPKW73003. So this is the most recent and latest version of SAP.
One more update is I tried regenerating the query in RSRT/RSRT1 but it starts in debug mode. This is of more worry to me now. Any suggestions or solutions are welcome, meanwhile I will raise this to SAP.
Best Regards
Ritesh Singh

System error in program SAPLRRS2 and form SELOPT_ASSIGN-01- (SAP BW 3.5)

Hi,
The following error occured when executed a query :
"System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
I have read OSS note 907533 but from what I see in this note, I conclude the repair instruction
only for SAP BI 7.0 so this note not for SAP BW 3.5.
I have use button "Check query" and everthing is fine.
Is there someone who can solve my problem?Thank you
Regards,
Satria

This question is interesting.
One of my users got the same message today. Wednesday, she ran some queries that had 3 variables on them. She had no problems. Yesterday, she tried to run the same queries, and one of the three variables did not show up on the variable screen. The characteristic in question is not authorization relevent. Others had no problems with these queries.
Today, I created a new query using the characteristic with no variables. It ran fine for her. I added the variable and she got the error message.
So, I would really appreciate an answer to this thread!
Ginny

BRAIN 299 System error in program CL_RSR_RRK0_ATTR_C and form when executin

Hi,
I get the following error message when trying to execute a query in production.
System error in program CL_RSR_RRK0_ATTR_C and form...
BRAIN 299.
This error does not occur in development or quality.
I tested through RSRT and in Technical Information i found the following entry
Query can use Aggregates NO
The entry in development and quality is
Query can use Aggregates Yes
How is the entry Query can use aggregates determined and how can i change it.
Please help to resolve this issue. It is very urgent.
Points will be rewarded for helpful answers.
regards,
Ashish

Hi!
I dont know what happens in RSRT1 (may be any troubles with cookie at server) but I can help you.
First, if you have created query and didn't test it in RSRT1 you have to first test it with button "ABAP web" or call query explicitly in Internet Browser. If you test query with button "Execute" message BRAIN 299 will appear with subsequent calls query in Internet Browser or with button "ABAP web". (You can copy your old queries to new and that'll be ok).
After that, you push button "Generate Report". So your query tested in different mode without any errors!
Good luck!
Best Regards,
Antoshkin Vitaly.

System error in program SAPLRSDRH and form BUILD_VIEW-3-

Hi.
I get the foll error when I execute a query:
System error in program SAPLRSDRH and form BUILD_VIEW-3-
This has started occuring since we upgraded our Oracle to 10g from 9.
Any ideas please?
Cheers
Anand

Thanks Lily.
I saw this note. But do you think this is applicable to me? I don't have any massive concurrent query usage situation. Currently I am the only user testing the queries in PRD after an Oracle upgrade. Do you think the upgrade has anything to with this issue?
Cheers
Anand

System Error in program CL_RSR executing queries

Similar Messages

Maybe you are looking for