System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl

Does anyone have any ideas or experiences for resolving "System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl"
Your input is appreciated

hi Arun,
sap oss note 858458 may relevant for you, take a look, may need support package.
Symptom
When you execute a query for which the user does not have authorization, a system error occurs: CL_RSR_REQUEST; Form TEXT_ELEMENTS_GET:VARIABLE.
Reason and Prerequisites
This is caused by a program error.
Solution
BW 3.0B
           Import Support Package 28 for 3.0B (BW3.0B Patch28 or SAPKW30B28) into your BW system. The Support Package is available when Note 0783170 "SAPBWNews BW3.0B Support Package 28", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 22 for 3.10 (BW3.10 Patch22 or SAPKW31022) into your BW system. The Support Package is available when Note 0783252 "SAPBWNews BW3.1 Content Support Package 22", which describes this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 14 for 3.5 (BW3.50 Patch14 or SAPKW35014) into your BW system. The Support Package is available when Note 0836439 "SAPBWNews BW Support Package 14 NetWeaver'04 stack 14" ", which describes this Support Package in more detail, is released for customers.
In urgent cases you can implement the correction instructions.
To make information available in advance, the notes mentioned may already be available before the Support Package is released. However, in this case the short text still contains the words "preliminary version".

Similar Messages

  • Error CL_RSR_REQUEST and form TEXT_ELEMENTS_GET: VARIABLE

    Hi Experts,
    Iam working on 3.1 system, When i tried to execute a Query. I got the following error.
    <b>CL_RSR_REQUEST and form TEXT_ELEMENTS_GET: VARIABLE</b>
    should i apply any SAP notes for this?
    How to correct this? any ideas.
    Thanks
    SP

    Apply OSS Notes: 885886 and 858458

  • !!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

    Hi Gurus,
    Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
    In the log i am getting following error message:
    "System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
    Message no. BRAIN299".
    Please help urgent.
    FYI.....
    we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
    Points will surely be awarded.
    Thanks,
    Anurag

    Hello Anurag,
    Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
    Regards,
    Neha

  • Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

    Hi All,
    When I refresh a query/workbook getting following error message and can not proceed further..
    Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
    We are using BW 3.5 and BEX reports.
    I'd appreciate if you could help me on this

    I don't know if you have since been able to resolve this problem.
    Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
    Hope that this is of help to someone.

  • System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

    Hi All,
    I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
    The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
    <i>The initial exception that caused the request to fail, was:
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
    When I execute Querys that are on Infoproviders, everything is ok.
    Any Idea??
    Thnks a lot!!!
    Yolanda.

    Hi,
    Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
    1. Agg level is active
    2. Check the query (option is available on query designer)
    thanks

  • System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02

    Hello experts,
    I get the following error when I execute the input ready query which was created on the aggregation level in BI IP.
    The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490.
    Thanks
    Terminate: System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02- (see long text) [A299(BRAIN)]
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

    You may wish to check this
    Note 1048923 - BRAIN X299 in SAPLRRI2; form INPUTABLE_CHAFREE-02-
    Hopeit Helps
    Chetan
    @CP..

  • System error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01

    Hi,
    I am trying to execute a report and it gives me this error  "system error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01" I have done a bunch of cell editing stuff and when I go and see each cell looks good,I am not able to figure out where exactly this issue is. Can anyone help me with this. I tried to even switch on the Trace in RSRTRACE but it goes to the debugger and stuck in some SAP code. Don't know what exactly the problem is. Any help would be appreciated.
    Thanks
    Jay.

    Hello Jay,
    If valid for your system release and support package level please apply the SAP note 1129450.
    Best Regards,
    Des

  • System error in program SAPLRRI2 and form BEST_WGR_02-01-

    Hi Friends,
    When I am trying to execute a query i get the error message below.
    System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
    Error when generating dataProvider
    The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
    I am using SAP BI Patch level 3.
    Internet explorer 7
    Gui 6.4
    At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
    Any Solution For This.
    Many Thanks,
    Anand

    Hi
    IE 7 is not so compitable with BEx. It always has the Popups problem..
    See the Note :919196 and  Note 1159538 - Issues in Internet Explorer   Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
    Hope it helps

  • System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

    Hello all,
    One of the users is trying to run a report in Production using BEx analyser and gets the following error.
    BI Server error:
    Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
    I have already run the SAP Note 1237190 but there is no use as the error comes up again.
    Could any one please help to resolve this issue.
    Thanks
    Phani.

    Hi Dipika
    Thanks for the reply.
    But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
    This is not happening with all the users though.
    Its a random problem only.
    Thanks
    Phani.

  • System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-

    Hi there
    I get the error message
    "System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
    when trying to run a web template from the portal. If I run it from WAD, it runs perfectly. If I then run the same template from the portal, with the same user, I get the above error message.
    If I click on the message, I get further information, which says
    "Portal Runtime Error
    An exception occurred while processing a request for :
    iView : com.sap.portal.contentfetching.BWTunnel
    Component Name : com.sap.portal.contentfetching.BWTunnel"
    Any ideas on what this can be?
    I am able to run other templates as this user.
    Cheers,
    Andrew

    Go to RSRT transaction and Generate the report (query) once again.
    Hope it works.
    Regards

  • System error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01 Message

    Hi Gurus,
    I am getting error 'system error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01' while checking and executing a query.
    The scenario is :
    - The query is using Replacement path formula variables and when I do remove these the error disappears.
    - I recreated the same formula variable but the error message reappears.
    - We are separating systems (moving on to new system) and the query runs absolutely fine in the old system.
    - The same variable is been used in some other queries as well but they run absolutely fine without any error.
    Any suggestions what is going wrong ? Should I raise an OSS to SAP, thats going to be the final GO !!
    I have tried almost doing all things but the error remains the same. This is quiet urgent and Reply will be much appreciated.
    Best Regards
    Ritesh

    Hi,
    Thanks for the reply. OSS note 982328 becomes irrelevant in my case as we are on SAP BW 7.3 and SP SAPKW73003. So this is the most recent and latest version of SAP.
    One more update is I tried regenerating the query in RSRT/RSRT1 but it starts in debug mode. This is of more worry to me now. Any suggestions or solutions are welcome, meanwhile I will raise this to SAP.
    Best Regards
    Ritesh Singh

  • System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-

    Hi Experts,
    We found an error ABAP/P Processor: Message_type_x and Error analysis shows "System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-"
    I found a forum that close to my issue: ABAP Dump Error - System error in program RSMDATASTATE
    Also, I checked the SAP Note : 858671 and 1094948.
    As for my BW system, the system component information is SAP Netweaver BI 7.0 Release 700 Level 0019. Does it mean the both sapnotes alreay apply to my sap system?
    Could anyone please advices me in this issue? I am so newbie in SAP BW. I'm so apology if they already have a forum or a note that related to my issue.
    Thank you everyone for further assistances
    With Best Regards,
    Molly

    Hi Molly ,
    A per my experience and and observation. Message_type_x issue will occur in two scenarios.
    1) When ever Sytesm copy happend.
    2) Triggering of info package twice at a same time.
    Case1:
    When ever system copy happens, we will have init request still pointing to the Previous targer syatem's in Init.
    Thsi can be resolved by reinitilization of source request.
    Note: Make sure that Init reqiuest is same in both Source and Target systems.
    Case 2:
    Message_type_x  May occur by triggering the info package at a same time twice(some time we also get xx request is inprocess alert).
    With respect to the following blog:
    Kindly check the request in RSMDATASTATE.
    1) Request SID for which all requests are technically o.k.
    2) Request SID for which all requests checked for quality.
    3) Request SID, up to which aggregates are to be rolled up.
    Best Regards,
    Maruthi

  • System error in program CL_RSR and form GET_CHANMID-02-

    System error in program CL_RSR and form GET_CHANMID-02- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I got this error in SCM IDES 7.0,  Planning Area Initialization and Display MPOS...Please help me...

    Hi,
    One of our planning sequence is failing in production with similar error. Could you please let us know what is the fix for the issue you faced.
    System error in program CL_RSR and form GET_CHANM-01
    Please advice as this is very critical.
    Thanks,
    Tintu

  • System error in program SAPLRRS2 and form SELOPT_ASSIGN-01- (SAP BW 3.5)

    Hi,
    The following error occured when executed a query :
    "System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
    I have read OSS note 907533 but from what I see in this note, I conclude the repair instruction
    only for SAP BI 7.0 so this note not for SAP BW 3.5.
    I have use button "Check query" and everthing is fine.
    Is there someone who can solve my problem?Thank you
    Regards,
    Satria

    This question is interesting. 
    One of my users got the same message today.  Wednesday, she ran some queries that had 3 variables on them.  She had no problems.  Yesterday, she tried to run the same queries, and one of the three variables did not show up on the variable screen.  The characteristic in question is not authorization relevent.  Others had no problems with these queries. 
    Today, I created a new query using the characteristic with no variables.  It ran fine for her.  I added the variable and she got the error message.
    So, I would really appreciate an answer to this thread!
    Ginny

  • Executing query error: System error in program SAPLRRI2 and form REP_A

    Hello Experts,
    I am facing problem while executing query.
    I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
    When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
    " >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
    System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
    Error when generating dataProvider "
    This query is using some standard structures, which are running successfully in other queries in QA.
    what would be an issue?
    Regards,
    Nirav Shah

    Hi,
      Try to regenerate the query in RSRT t.code.
       ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
    After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
    OSS notes : 1. 1121766
                       2. 1117966
                       3. 1225856
    Regards,
    Siva.

Maybe you are looking for

  • I get no signal when i connect my latop and tv or other output device through my HDMI cable

    no matter what i try i can never get my laptop to display anything through my hdmi. every time i connect it it tell me  "no signal".ive used the duplicate seting and tried different things but still nothing

  • Strange Bug in iBook Author?

    Last year I created an iBook lab manual for my students.  The file size of the final book was around 750MB.  The file size proved to be too large and cumbersome to download and took a while for it to show up in iBooks. This year I decided to chop up

  • Installing Arch in Microsoft Virtual PC 2007 SP1

    Firstly, I'm very new to linux and am looking to try out as many distros as possible before deciding on which one to learn from.  I want a simple but powerful distro which has minimal packages which will allow me to develop a system myself, learning

  • Simple Class and the Display List

    I have very simple code for a class: package     import flash.text.TextField;     import flash.display.Sprite;     public class Greeter extends Sprite         public function Greeter()             var txtHello:TextField = new TextField();            

  • DVCPRO HD footage problems with Quicktime 10 and MacBook Pro

    I am trying to open DVCPRO HD footage in Quicktime 10 on my computer and just get black screen with no video. Cannot get these files to play yet can get other ones to play, just not the DVCPRO HD footage shot with Panasonic P2 cards. I can play the s