System error in Program SAPLRR12 .To use posting period as denominator?

Hi Gurus,
In a BEx report based on 0PCA_C01 cube I have to display a col which is formula based as (weighted avg cap empl / number of months). I am using the posting period as the divisor . The coversion of posting period to number is giving error" System error in Program SAPLRR12 and form REP_CUID_WGR_L-03-... ". Is there any alternative of cexit where we can derive the month count from the period.
Please give some idea on how to derive the posting period as number
I am in BW 3.16.
Roy

Hi Dipika
Thanks for the reply.
But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
This is not happening with all the users though.
Its a random problem only.
Thanks
Phani.

Similar Messages

System error in program CL_RSR_WWW_RENDERER and form GET_NORM

when i exicute the query, after exicution if i right click on the character >go to the properties
iam getting the fallowing error-*System error in program CL_RSR_WWW_RENDERER and form GET_NORM (see long text)*

Hi Gandapudi,
The "Only values from Navigation" refers to get data with the posted values only.
You can specify how filter values are to be selected for query execution:
●      Only Posted Values for Navigation
The system displays posted values only.
●      Only Values in InfoProvider
The system displays only those values that are in the InfoProvider.
●      Values in Master Data Table
The system displays all characteristic values from the master data, independently of transaction data.
●      Characteristic Relationships
The system uses the current restrictions from the filter of the query and only displays the characteristic values that are valid according to the characteristic relationships.
Refer the link for more information
http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a5673e09411d2acb90000e829fbfe/frameset.htm
Regards,
Ravi Kanth

!!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

Hi Gurus,
Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
In the log i am getting following error message:
"System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Message no. BRAIN299".
Please help urgent.
FYI.....
we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
Points will surely be awarded.
Thanks,
Anurag

Hello Anurag,
Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
Regards,
Neha

Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

Hello SDN
While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
"Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
Appreciate any help and points will be assigned for useful information.
Thanks
kumar

Hi Dinesh
It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
variable_screen=X&template_id=0QUERY_TEMPLATE
In the messages , For generation, it display:
&CAUSE&
The query contains selection elements with "Constant Selection". Such a
query cannot be run in the read mode 'Read Everything at Once'.
&SYSTEM_RESPONSE&
The read mode is automatically converted.
&SYS_ADMIN&
In the Variables, I see
&CAUSE&
Variable <(>&<)>V1& is used in the query in such a way, that an
optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be
connected using OR to additional selections for <(>&<)>V2& in the
global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill
an interval selection in either the from-field or the to-field.
&SYSTEM_RESPONSE&
&WHAT_TO_DO&
If you are able to accept the mandatory entry, you need not do
anything. Otherwise you must work with several variables in the query.
You can use an optional interval variable to do this.
&SYS_ADMIN&
For Key Figs :
&CAUSE&
Quantities are multiplied with values for the key figure &V2& (&V1&).
This is not sensible.
A basic key figure was probably defined that contain a price. Only
addable amounts should be written on the database. Ratios and prices
are calculated as key figures. Therefore, the system maintains the
correct sequence, meaning summing takes place on every place and then
the quotient is formed.
If a 'price amount' is saved as a basic key figure after all then the
'non-aggregated indicator' can be undone using 'Change key figure'.
Therefore, the system carries out the multiplication (or division)
before the summing. The key figure is then assigned to the group 'Other
columns'.
&WHAT_TO_DO&
Please check the definition of the key figure &V2& (&V1&).
<DS:TRAN.KDNN>Check or change key figure &V1&</>
Can you please let me know how to fix this issue?
Thanks
Kuamr

Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on this

I don't know if you have since been able to resolve this problem.
Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
Hope that this is of help to someone.

System error in program CL_RSMD_RS_SPECIAL

I have a query built on a Infoset, and the problem comes with 0FISCPER variable, when we try to do a input help (F4) in Bex. this happens only when I use fiscper on queries bulit on INFOSETS, and it works perfectly alright with all other cubes. We are on SP13. So do anyone know how to fix this issue, or a single OSS that can fix this issue.
System error in program CL_RSMD_RS_SPECIAL and form
IF_RSMD_RS~READ_META_DATA-02 (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program
state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template,
or during interaction in the planning modeler, and if you can reproduce
this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for
the trace tool environment as well as SAP Note 899572.
and in portal, it gets to the point of variable screen and then throws a error msg.
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION

I was a lil late on this time
However;i found a note below which exactly matches your infoset issue and 0fiscper,but i believe that SP-14 did the trick.
any ways good luck
Note 1058906 - GET_DIME_VALUES-02 in CL_RSMD_RS_SPECIAL
Hope it Helps
Chetan
@CP..

System error in program Constiuent Assembly - internal error

Hi,
This is regarding the query execution, we have three variables in the selection screen, We have one variable for hierarchy selection from Constiuent Assembly.
I am facing an issue while executing the query in BEX analyzer.Once i fill all the selection criteria in variable screen, I am getting an error saying that "System error in program Constiuent Assembly "
Can anyone please suggest what could be the reason for this error?
Please find below the error details.
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

Hi,
May be the selection variable is not correct or corrupt.
Use any other slection variable for hierarchy object.
I hope it will help.
Thanks,
S

System error in program SAPLRSDRC

Hi Gurus,
I created a control query for precalcualting web templates using reporting agent and when i released the job it gave me this error
System error in program SAPLRSDRC and form /BIC/F100012
Message no. BRAIN299

Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.

Procedure
Analyse the situation and inform SAP.
Does any body has any idea about this error. Please let me know any one got across this kind of problem.
Thank you one and all
Suneel

There may be some error (eg syntax error) in this form routine.
Open program saplrsdrc and search for the form routine /BIC/F100012, or do a syntax check on SAPLRSDRC. If syntax check is ok, do see if you have this form routine, and whether it has any code that is resulting in a runtime error.
You may also check for dumps in ST22.

System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

Hi All,
I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
The following error ocurrs in QueryDesigner when trying to execute a Query that is on an Agregation Level :
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)
When I execute Querys that are on Infoproviders, everything is ok.
Any Idea??
Thnks a lot!!!
Yolanda.

Hi,
Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
1. Agg level is active
2. Check the query (option is available on query designer)
thanks

System error in program SAPLRSOA

Hello All,
I tried to execute a query and it resulted in the following error:
System error in program SAPLRSOA and form FUNC RSOA_VCUBE_READ_REMOTE_DATA[6] (see long text).
In BI, the data is readfrom the remote cubes. And there seems to be error in the function used to read the data from these remote cubes.
Further on seeing the long text, I got the follwing message:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299
Can someone pls help me on this soon?

Hi,
Pls chk this note;
Note 983605 - Query on RemoteProvider: No data or termination
Symptom
A query on a VirtualProvider (SAP RemoteCube) or on a MultiProvider that contains a Virtual Provider terminates with an error message from the source system. Possible errors are:
Unexpected error: reduce_field_list
Or: The query does not return any data.
Or: If you carry out the query on a MutiProvider with virtual PartProvider, it may return incorrect data, because the part from the RemoteCube is missing.
Other terms
RSOA_VCUBE_READ_REMOTE_DATA, PERFORM transform_to_ts, Remote InfoCube, InfoProvider, Cube, data target, destination
Reason and Prerequisites
This problem is caused by a program error.
The VirtualProvider (SAP RemoteCube) is connected with a DataSource via a (3.X) InfoSource.
The navigation step of the query leads to a limitation (selection) on a characteristic that is filled with a constant in the transfer rule (between 3.X InfoSource and DataSource).
Technical: Initial entry in field list.
Solution
BW 3.0B
           Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available once Note 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
           Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available once Note 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
BW 3.50
           Import Support Package 19 for 3.5 (BW 3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package 19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
BW 7.0
           Import Support Package 10 for 7.0 (BW 7.0 Patch 10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version"
Hope this helps
Regards
CSM Reddy

System error in program SAPLRRK0

Hi All,
Every day morning when I execute a query iam getting these messages
SQL Error: 768-
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
but after some time when i execute the same query its running fine. Iam getting this every day morning when i execute any query for the first time. I tried to look about this in service.sap but unable to figure it out. Does any one had this kind of problem if so please let me know what exactly needs to be done. We are currently using BW 3.5
Thank you all,
Padma

Hi ,
Wen you run first time,If there are any loads going on the data target on which you are running your query, you may get this error. Make sure there are no loads on the data you are reporting on.
Regards
Manga

System error in program SAPLRRI2 and form BEST_WGR_02-01-

Hi Friends,
When I am trying to execute a query i get the error message below.
System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
Error when generating dataProvider
The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
I am using SAP BI Patch level 3.
Internet explorer 7
Gui 6.4
At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
Any Solution For This.
Many Thanks,
Anand

Hi
IE 7 is not so compitable with BEx. It always has the Popups problem..
See the Note :919196 and Note 1159538 - Issues in Internet Explorer Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
Hope it helps

System Error in program CL_RSR executing queries

Hi,
We have several queries created from multiprovider X and these queries are included in a workbook. Multiprovider is active and fine (I have used the programs RSCOMPCONS and RSR_MULTIPROV_CHECK return status OK).
When I open the workbook the followings error messages are showed (before selection screen):
- System error in class SAPMSSSY1 method: UNCAUGHT_EXCEPTION
- System error in program CL_RSR and FORM GET_INITIAL_CHAVL_OFF-02-
We are looking sap notes (we are in the new version 7.30, Support package 5) in order to solve this error but We don't find the solution.
Please, could you help me?
Thanks!

Might require to collect the workbooks, queries along with the MP & perform a transport. Please collect the roles also. This must solve.

System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

Hello all,
One of the users is trying to run a report in Production using BEx analyser and gets the following error.
BI Server error:
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
I have already run the SAP Note 1237190 but there is no use as the error comes up again.
Could any one please help to resolve this issue.
Thanks
Phani.

Hi Dipika
Thanks for the reply.
But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
This is not happening with all the users though.
Its a random problem only.
Thanks
Phani.

System error in program CL_RSR_WWW_PAGE

Hi BW gurus!
when i try to export to excel from my report "Logistic dahsboard ", i have this error message :
"System error in program CL_RSR_WWW_PAGE and form 01EXPORT_DATA:01 "
SAP doesn't give any notes.
Can anyone help me?
Dev

Solved.
Go to SE80 (in BW system) :
--> Click on MIME Repository
--> path SAP --> BW --> Customer --> Javascript
one of the javascript file contains all the javascript functions (Export to excel, bookmark...) you have in the web screen of the report used in your reports
--> Search keyword "goto_url"
--> normally you reach the javascript function
--> now check the parameters in case of "(value = 'EXPORT')", especially the name of the dataprovider must map with which one defined in the WAD.
hope it will be helpful for anyone
Dev

System error in Program SAPLRR12 .To use posting period as denominator?

Similar Messages

Maybe you are looking for