System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-

Hi
when i execute the query on remote cube we are getting the error like below
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
We have Remote cube acessing the oracle views through ud connect .Can any one please let me know whats the issue is ?.we are using BW3.5 PATCH LEVEL 15…

Hi,
see that there is master data deletions..  if so how did you delete the master data.. then  check   RSRV to analyse and repair your infocube
or    tablespace problem (PSAPTEMP),  check with basis.
check transaction sm21, there may contains tablespace name. ask your basis to fix the tablespace PSAPTEMP problem. after that you should be able to execute the report
or Go to ST22 and check the shortdumps ( few) and follow the debugger to know the actual cause... it   could be errors in the info object mapping ....

Similar Messages

  • Error in Program SAPLRRKO and form RSRDR; SRRK0F30-01

    Hi I'm hoping someone here can help me as I'm not getting far with OSS.
    I'm running a query across an Infoset that combines 3 ODS together. However I'm getting the following error
    Error Value "(hex.)" of characteristic contains invalid characters
    Abort System error in Program SAPLRRK0 and form RSRDR; SRRK0F30-01
    and the query terminates.
    I've checked the infoset in RSISET and it's ok and I've regenerated the query in RSRT with no joy.
    I am filtering on a date field that does have # not assigned entries in it.  Is this causing the problem?
    I'm on BW 3.5   Patch level 16 and using BEx 3.5 patched to level 11.
    Any advice would be appreciated greatly

    Hi,
    We are also facing same error , can you please let me know how did you solve this problem.
    any help will be appreciated.
    Thanks in advance
    Manju

  • Abort system error in program SAPLRRK0 and from RSRDR(CHECK_NAV_INIT_BACK)

    Hi guys,
    any can help how to solve below error.
    Abort system error in program SAPLRRK0 and from RSRDR(CHECK_NAV_INIT_BACK)
    regards
    raja

    Hello ,
               Check the following note 578948 and see if you could get some help.
    hope it helps
    assign points if useful

  • System error in program SAPLRRK0 and form LRECH_AGGR_ELSE-01

    Hi...
    Hope someone can help me with this issue.
    Im getting this error in some querys:
    System error in program SAPLRRK0 and form LRECH_AGGR_ELSE-01
    All of these querys were working fine, suddenly im getting this error and i dont have idea why it can be, maybe a bad configuration on the server or i dont know...
    Thanks and regards!

    Hi ,
    I got the same error message  in the following scenario.
    I determine the value of calculated key figure KF1 using if else condition.
    I have to use KF1 in another calculated key figure KF2 .
    I get this error message when I use KF1 in KF2.
    I do not get this error message when I do not use KF1 in any of the calculated key figures.
    Can you please advise how can I resolve this issue .
    Is there any other way to use KF1 in  KF2.
    Thanks
    Srinivas

  • System error in program SAPLRRK0 and form LRECH_AGGR_BNR-02

    Hello experts,
    I am facing an issue when executing a query getting the following error
    "System error in program SAPLRRK0 and form LRECH_AGGR_BNR-02"
    In my query I am using replacement path formula variable, I tried without that formula variable also but still getting the same error.
    we are on BI 7.0 & SP14 and searched for OSS notes as well but this error is occuring in SP9, SP12, SP16, SP17 and SP18.
    Just wondering if anyone faced same problem and  have any interim solution apart from upgrading the Support packs.
    Thanks a lot in advance.
    Best Regards
    VJ

    Hi,
    Check with links....This is program error.
    1. Note 1011069 - System error in SAPLRRK0 and form LRECH_AGGR_BNR-02-
    2. Note 961002 - X299: System error in SAPLRRK0 and LRECH_AGGR_BNR-02-
    3. Note 1082605 - Termination BRAIN 299 in SAPLRRK0; LRECH_AGGR_BNR-02-
    4. Note 993288 - Composite note: Formula vars. w/ replacement path BI7.0 SP09
    Regards,
    Srini Nookala

  • System error in program SAPLRRK0 and form MEGA_SORT_H-05-

    Hi,
    Any idea what could be the reason in getting the above error message 'System error in program SAPLRRK0 and form MEGA_SORT_H-05-'.
    We are getting this error while executing the query and activating the hierarchy nodes.
    Regards
    Ramesh Ganji

    Which version of BI are you using-  lots of notes on MEGA_SORT_H -
    also mention your SP Levels.
    BW-BEX-ET 956865 Expanding nodes to level n does not work 28.07.2006
    BW-BEX-OT-OLAP 602070 Missing leaves in a hierarchy display 07.03.2003
    BW-BEX-OT-OLAP 857895 'Suppress results' for the display hierarchy 27.11.2006
    BW-BEX-OT-OLAP 989872 # Entries when sorting in descending order by key or text 09.11.2006
    Arun

  • System Error in program SAPLRRK0 and form NODE_SET_TO_NODE-01

    Encountered this problem in restricting query on hierarchy variable. Let me know if anyone has faced a similar problem.
    Thanks.

    Hi Farhan,
    About Deactivating: This can be done from the report results itself using the context menu. However as in your case the query is not generating the results, I was talking about turning off the hierarchy in the characteristic properties. For the Char on which you have the hierarchy set, right click > properties and uncheck the check box on the right hand side where the hierarchy is set. This will keep the hierarchy available for the report, but not in view initially.
    About your problem: Could it be something to do with the user's authorisation...usually this would give a not authorised message, but still just to check. Can you try to run the report using transaction RSSMQ with the user's ID and look at any messages generated...

  • System error in program SAPLRRK0 and....Value '_' of characteristic 0EMP...

    Folks,
    We are using ESS/MSS business packages for integration with BW backend, on trying to access status report using,
    Manager Self - Service --> Reports --> Development Discussion Status Reports
    We are getting the following warning & error messages on the portal screen:
    Value '_' of characteristic 0EMPLOYEE is not a number with 000008 spaces
    System error in program SAPLRRK0 and form SET_SIDFIX_01-01-
    On the face, it looks like a BW error (a BEx query error) being propagated and getting caught by the portal screen.
    Any pointers in resolve this will be appreciated with maximum points..
    Please let me know.
    Cheers
    Paras

    Thanks Nikhil,
    Request your guidance on this, I am new to ESS/MSS business packages and using BW as a backend.
    Can I expect to have any errors in configuration (from the portal end) for this kind of error/messages to come up ? If yes, pls gimme pointers to resolve this discrepancy or is this some BEx query error due inconsistencies in employee master data ?
    Please let me know.
    Paras

  • !!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

    Hi Gurus,
    Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
    In the log i am getting following error message:
    "System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
    Message no. BRAIN299".
    Please help urgent.
    FYI.....
    we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
    Points will surely be awarded.
    Thanks,
    Anurag

    Hello Anurag,
    Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
    Regards,
    Neha

  • Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

    Hi All,
    When I refresh a query/workbook getting following error message and can not proceed further..
    Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
    We are using BW 3.5 and BEX reports.
    I'd appreciate if you could help me on this

    I don't know if you have since been able to resolve this problem.
    Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
    Hope that this is of help to someone.

  • System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

    Hi All,
    I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
    The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
    <i>The initial exception that caused the request to fail, was:
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
    When I execute Querys that are on Infoproviders, everything is ok.
    Any Idea??
    Thnks a lot!!!
    Yolanda.

    Hi,
    Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
    1. Agg level is active
    2. Check the query (option is available on query designer)
    thanks

  • System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02

    Hello experts,
    I get the following error when I execute the input ready query which was created on the aggregation level in BI IP.
    The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490.
    Thanks
    Terminate: System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02- (see long text) [A299(BRAIN)]
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

    You may wish to check this
    Note 1048923 - BRAIN X299 in SAPLRRI2; form INPUTABLE_CHAFREE-02-
    Hopeit Helps
    Chetan
    @CP..

  • System error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01

    Hi,
    I am trying to execute a report and it gives me this error  "system error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01" I have done a bunch of cell editing stuff and when I go and see each cell looks good,I am not able to figure out where exactly this issue is. Can anyone help me with this. I tried to even switch on the Trace in RSRTRACE but it goes to the debugger and stuck in some SAP code. Don't know what exactly the problem is. Any help would be appreciated.
    Thanks
    Jay.

    Hello Jay,
    If valid for your system release and support package level please apply the SAP note 1129450.
    Best Regards,
    Des

  • System error in program SAPLRRI2 and form BEST_WGR_02-01-

    Hi Friends,
    When I am trying to execute a query i get the error message below.
    System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
    Error when generating dataProvider
    The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
    I am using SAP BI Patch level 3.
    Internet explorer 7
    Gui 6.4
    At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
    Any Solution For This.
    Many Thanks,
    Anand

    Hi
    IE 7 is not so compitable with BEx. It always has the Popups problem..
    See the Note :919196 and  Note 1159538 - Issues in Internet Explorer   Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
    Hope it helps

  • System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

    Hello all,
    One of the users is trying to run a report in Production using BEx analyser and gets the following error.
    BI Server error:
    Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
    I have already run the SAP Note 1237190 but there is no use as the error comes up again.
    Could any one please help to resolve this issue.
    Thanks
    Phani.

    Hi Dipika
    Thanks for the reply.
    But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
    This is not happening with all the users though.
    Its a random problem only.
    Thanks
    Phani.

Maybe you are looking for